SBC News

I moved the new skel dir's to a sud dir of debian-skel. I removed gnome-builder, freecad and the launch-bars from the app groups. leaving it to the user to add these part . this shold bring images back downin size. Printing and filesharing moveed to app-groups like the debian community said it shouldbe. To make it cleaner smaller base desktop install. as filesharing and printing are optional addons if you want web-dev removed I will but I know alot who want the tools to dev and test web pages. View the full article

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

Description Restore CONFIG_OF_CONFIGFS=y accidentally(?) lost in https://github.com/armbian/build/commit/fae4f664397656e5a432a24b8adc5c237a53227e How Has This Been Tested? [x] Compile current&edge kernels, check overlays works Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Uboot v2024.01 leaves HDMI/VOP and USB ports in a state that is not liked by vendor kernel tools (eg. the Multitool), thus making their usage difficult or impossible. These patches will assert the resets for HDMI, VOP and USB ports and deassert them on uboot exit, so the kernel (any kernel) will find them in active and "clean" state. Nerd note: the USB nodes in uboot device tree do not have the reset properties. Adding the reset properties makes the USB ports undetectable to the kernel because uboot - on purpose - leaves the devices with the reset asserted. To let the kernel detect the ports, you have to add the reset properties in the kernel device tree too…

Description Remove & replace deprecated packages. How Has This Been Tested? [ ] Ci Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

kernel-dtb: copy also the dtb binary for the board to output kernel-dtb: copy also the dtb binary for the board to output View the full article

Description Can recompile the image and start How Has This Been Tested? Use ./compile.sh build BOARD=visionfive2 BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=trixie to build the image Complete boot log [*] Use gcc to compile a simple project (helloworld.c) Checklist: [*] My code follows the style guidelines of this project [*] I have performed a self-review of my own code [*] My changes generate no new warnings View the full article

This week, the Armbian development team pushed several noteworthy enhancements, with improvements spanning user experience, bootloader upgrades, and broader system support. Notably, this week saw the debut of OpenMediaVault in Armbian’s software installer, a move that brings plug-and-play NAS functionality to supported boards. OpenMediaVault is a feature-rich platform that enables users to turn single-board computers into fully-fledged network storage devices. Thanks to a contribution by Igor, the integration is now available through armbian-config interface, giving users a streamlined way to install and configure OpenMediaVault without needing to manually manage service…

This week in Armbian development saw significant advancements across kernel, firmware, and build targets. The release of 6.18.y kernel UEFI images marks a major update, alongside expanded desktop build options including Cinnamon and KDE Neon for UEFI systems. Notable board support enhancements include the addition of custom build targets for Amlogic TV Boxes, the Raspberry Pi Zero 2W as a virtual board, and improved support for Orange Pi 3 LTS and Odroid M2 devices. Automation improvements streamline inventory rebuilds and board data management, while new features such as Armbian board auto-detection and browser enablement for Riscv64 boards enhance usability. Several bug…

Olimex UEXT-CH390 is a small open-source hardware module that adds 10/100 Mbps wired Ethernet connectivity to microcontroller boards through an SPI interface. It is designed for Raspberry Pi Pico and Pico 2 boards, as well as ESP32-S3, C3, C5, C6, and other microcontrollers without built-in Ethernet connectivity. The module is based on the WCH CH390 Ethernet controller and features an RJ45 connector, a standard UEXT connector, and a smaller 1.0mm-pitch pUEXT connector. It measures 50 x 21 mm and is supported in the Arduino IDE and ESPHome firmware, making it suitable for wired IoT sensors, Home Assistant devices, and other applications where WiFi is unreliable or unwanted…

Description Added and rework armbian patches. Checklist: [x] Test build sunxi [x] Test work on board bananapi-m3 [ ] Test build sunxi64 [ ] Test work on board orangepi-pc2 View the full article

From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14! View the full article

The Juno tablet is a 10.1-inch Linux tablet that ships with Manjaro Linux or Mobian, and is powered by an Intel Celeron N5100 quad-core Jasper Lake mobile processor. The Linux tablet comes with a 1920×1200 resolution IPS touchscreen display, 8GB LPDDR4 soldered on the main board, and a choice between a 256GB, 512GB, or 1TB SSD. Customers can select one of the three Linux distributions with Mobian, as well as Manjaro Linux with either Phosh or Plasma mobile environments. Juno tablet specifications: SoC – Intel Celeron N5100 quad-core Jasper Lake processor @ 1.1GHz / 2.8GHz (Turbo) with 24EU Intel UHD graphics @ 350 / 800 MHz (Turbo); 6W TDP System Memory – 8GB LPDDR4 Stora…

Description Clear the code for system scripts: /etc/kernel/postrm.d/xx-initramfs-cleanup /etc/kernel/postinst.d/xx-initramfs-cleanup Split Pull Request [#4691] Checklist: [x] Tested on the bananapim64 device of the jammy OS [ ] Test on a device with a separate partition /boot OS debian View the full article

The BeagleBoard.org Foundation has just launched their latest single board computer with the BeaglePlay SBC powered by a Texas Instruments AM625 Cortex-A53/M4/R5 processor with 16GB eMMC flash, 2GB DDR2, and a wide range of I/Os, wired and wireless communication options, and support for expansion module compatible with MikroBus, Grove, and Qwiic connectors. Two wired Ethernet are offered, namely a typical Gigabit Ethernet RJ45 port, as well as a single-pair Ethernet RJ11 port limited to 10 Mbps but with a much longer range and power over data, and wireless connectivity includes dual-band WiFi 4, Bluetooth LE, and Sub-GHz. The board also features HDMI and MIPI DSI display …

Last week we checked out the hardware for the GL.iNet GL-S200 Thread Border Router kit with three nRF52840 Thread Dev Boards, and I’ve now had time to work with the kit, so I’ll report my getting started experience in the second part of the review. GL-S200 Initial Set Up I connected the WAN port to my Ethernet Switch itself connected to my modem router and the LAN port to my laptop, so I could access the web interface using the default IP address (192.168.8.1). The GL-S200 uses the same Admin Panel as other GL.iNet routers such as the Beryl AX router we reviewed at the beginning of the year. You’ll be greeted by a wizard to let you select the language and set a new passwo…

Description Bumped Allwinner kernels Legacy: 5.15.120 -> 5.15.121 Current: 6.1.39 -> 6.1.40 Edge: 6.4.4 -> 6.4.5 5.15.121 needed same patch fixes as done for 6.1.39 in PR #5494 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Booted legacy, current and edge images on Orange Pi Prime (sun50i H5) [X] Booted legacy, current and edge images on NanoPi Duo2 (sun8i H3) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas…

Description Hello! Here is a patch that will add the device tree and defconfig for the NanoPC T6 in U-Boot, with support for booting from an NVMe SSD. Works excellent with https://github.com/armbian/linux-rockchip/pull/78. How Has This Been Tested? Note: My T6 did not come with a spi nor chip, so I soldered it myself. [x] Flashed the bootloader to the spi nor. [x] Booting from NVMe works as expected with the bootloader in the spi nor. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the d…

Description Delay fetching khadas common drivers to fix gha matrix failure. Also fixed a cosmetic error when compiling kernel about not able to modify kernel git hooks How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] built kernel for vim1s. Made sure common drivers are getting compiled. Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no n…

mekotronics 3588: fix entering RK LOADER mode by keeping the RECOVERY button pressed during boot mekotronics 3588: fix entering RK LOADER mode by keeping the RECOVERY button pressed during boot those patches are a mess, hopefully I'll find time to squash soon mekotronics 3588: squash u-boot patches same as before but not touching the same file twice+ View the full article

Description I was checking this Actions workflow https://github.com/armbian/build/actions/runs/8309150018/job/22740183634 and noticed [!] ERROR: failed to detect microarchitecture Reason: RISC-V is not yet supported by kernel-hardening-checker. See https://github.com/a13xp0p0v/kernel-hardening-checker/issues/56 In their README: Supported microarchitectures X86_64 X86_32 ARM64 ARM TODO: RISC-V (issue https://github.com/a13xp0p0v/kernel-hardening-checker/issues/56) How Has This Been Tested? Ran manual in CLI: file=config/kernel/linux-uefi-risc64-edge.config and then if [[ "${file}" = config/kernel/*.config && ! "${file}" =~ riscv ]]; then echo yes; fi Don't …

Description Radxa Rock 3C has a variant with aic8800 wifi 6 module using sdio, marked as board rev 1.4. The dkms driver is added to the image by reusing the extension recently added in #6670. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh build BOARD=rock-3c BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow RELEASE=trixie Build log: https://paste.armbian.com/epehanekey [x] Wifi is detected on image first boot on my Rock 3C rev 1.4. Checklist: Please delete options that are not relevant. […

linux-rk35xx-vendor: enable CONFIG_KPROBES linux-rk35xx-vendor: enable CONFIG_KPROBES for tetragon & co View the full article

Docstrings generation was requested by @leggewie. https://github.com/armbian/build/pull/8027#issuecomment-2763300084 The following files were modified: lib/functions/host/prepare-host.sh ℹ️ Note CodeRabbit cannot perform edits on its own pull requests yet. View the full article

This week’s Armbian development saw significant progress across multiple areas, including desktop environment enhancements, kernel updates, and expanded hardware support. Notable changes include the addition of GNOME desktop options, improvements to XFCE organization, and updates to U-Boot for several boards. The team introduced new board images and logos, refined Docker automation and documentation, and standardized numerous software modules for better maintainability. Kernel advancements featured bumps to 6.19-rc8, integration of ZFS v2.4.0, and targeted fixes for Rockchip and Odroid platforms. Community governance and build processes were also strengthened, alongside t…

Description Add ClockworkPi DevTerm A06 support https://github.com/armbian/build/issues/3564 Jira reference number AR-1136 How Has This Been Tested? Checklist: [x] Test running on console [x] Test build on my ubuntu pc View the full article

Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard. View the full article

Description add megous patches: tag: orange-pi-5.18-20220627-1924 switch to version tag=v5.18.8 Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

Arducam has launched of Time-of-Flight (ToF) camera module for Raspberry Pi that enables depth sensing by capturing 3D data (at 240×180 resolution) at a distance of up to 4 meters. Arducam has launched several cameras for Raspberry Pi boards over the years, more recently the Arducam Pi HawkEye 64MP camera, but the Arducam ToF camera is quite different, as while it still connects to the MIPI CSI connector of the SBC, it is used to measure distances and depth and display 3D data. Arducam ToF camera specifications: Compatibility – Any Raspberry Pi board with a MIPI CSI connector Effective number of pixels – 240×180 Frame Rate Up to 120 fps (sensor) Up to 30 fps (when process…

Description Moving wireless driver(s) from kernel specific folders. Todo: Compare and unify with the driver that floats in Rockchip patches. Jira reference number AR-1507 How Has This Been Tested? [x] Build test on current and next [ ] Test on hardware Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

STMicro has added three new families to its STM32U5 Cortex-M33 microcontroller series with the entry-level STM32U535/545 with as little as 128KB flash, the STM32U595/5A5 with up to 4MB of Flash and 2,514KB of RAM, and the STM32U599/5A9 with similar features as the STM32U595/5A5 by adding the new NeoChrom 2.5D GPU plus TFT-LCD and DSI display interfaces. STMicro also announced that STM32U5 series MCUs were the first general-purpose MCUs to receive NIST-embedded random-number entropy source certification. As of now, along with the STM32U575/585 introduced in February 2021 with an optional Chrom-ART 2D GPU, STMicro offers eight product lines as part of the STM32U5 MCU series…

SONOFF iHost is a Smart Home Hub that enables local control of SONOFF smart switches, lightbulbs, Zigbee sensors, and so on without having to require a connection to the cloud (e.g. eWelink). Future software upgrades will also add more devices such as the ones flashed with Tasmota firmware and any device compatible with the Matter IoT protocol. The gateway is based on either a Rockchip RV1109 SoC with 2GB RAM or a Rockchip RV1126 with 4GB RAM and offers 10/100M Ethernet, WiFi, Bluetooth LE, and Zigbee 3.0 connectivity, as well as a USB 2.0 port to allow for more connectivity. SONFF iHost Smart Home Hub specifications: SoC and Memory Rockchip RV1109 dual-core Arm Cortex-A7…

Description this issue was introduced by commit 7e9ebe1 the variable sduuid is supposed to start with "UUID=" fixed now by prepending UUID= to $sduuid, if the "raw" $sduuid is not empty closes Jira reference number AR-1611 How Has This Been Tested? The statement of the line fixed has been tested in an offline bash session. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description The 32-bit Allwinner dtb files are under /boot/dtb and not under /boot/dtb/allwinner as expected by u-boot because of the current board config. Fixed dtb location by removing the allwinner/ prefix for nanopi-r1 and nanopi duo2 boards. This issue seems to have already reported on the forums as well - https://forum.armbian.com/topic/28117-nanopi-duo-2-hang-on-boot/ How Has This Been Tested? Tested by creating edge image with the changes included in the pull request. The stable image still doesn't boot because of the ongoing issue with the 6.1.30 kernel image, but 6.2.16 kernel from edge image works [x] Created edge image and booted on nanopi duo2 Checklist:…

artifact-uboot: include BOOTCONFIG in u-boot artifact version hash artifact-uboot: include BOOTCONFIG in u-boot artifact version hash HOW did we get this far without this? should cause rebuild of all u-boots, hopefully View the full article

Description This PR tries to improve the GitHub bug report template for the build framework: Don't have pre-placed text in text boxes which have to be deleted each time (placeholder/light grey background text is still there) Add latest host systems Add optional checkbox if building on WSL2 Small wording improvements/changes How Has This Been Tested? [x] View the result (preview) in my forked repo Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description As per subject: edge kernel for rockchip 32 bit targets has been bumped to 6.10 Also updates mainline-kernel.conf GitHub issue reference: Jira reference number AR-2427 How Has This Been Tested? [x] Compile deb kernel packages for rockchip family [x] Live testing on rk322x system [ ] Live testing on rk3288 Asus tinkerboard Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas View the full article

rockpro64: bump u-boot to 2024.07; make fancy configs; drop bin size limit as fix landed upstream rockpro64: bump u-boot to 2024.07; make fancy configs; drop bin size limit as fix landed upstream View the full article

squid-deb-proxy-client is a small script to transparently detect and use a caching packages proxy in the LAN like apt-cacher-ng. It is incredibly convenient and useful to cut down on unnecessary downloads and speed up the build. View the full article

Welcome to the latest Armbian Newsletter: your source for the latest developments, community highlights, and behind-the-scenes updates from the world of open-source ARM and RISC-V computing. Join Armbian at embedded world 2026. Meet us in Hall 3, Booth 3-556 (Seeed Studio), where we’ll be showcasing the Armbian build framework and how it powers reliable, production-ready Linux for ARM devices. FriendlyElec’s NanoPC T6 Plus: The flagship edge computing powerhouse and media stationThe NanoPC T6 Plus, powered by the performance-optimized Armbian OS, is your ticket to a truly professional, high-speed edge computing experience. This industrial-grade device is built around the …

AAEON claims the PICO-PTH4 is the world’s first 2.5-inch Pico-ITX board powered by an Intel Panther Lake processor, such as the Core Ultra 5 325, Core Ultra 7 355, and Core Ultra X7 358H, delivering up to 180 TOPS of AI performance in a 100mm x 72mm form factor. The single board computer ships with up to 32GB of LPDDR5X, supports M.2 M-Key/E-Key and PCIe x4 FPC expansion, and offers dual 2.5GbE, HDMI 2.1 video output, two USB 3.2 Gen 2 ports, and internal connectors for USB 2.0, front panel, RS-232/422/485, GPIO, and SMBus/I2C. AAEON PICO-PTH4 specifications: Panther Lake SoC (one or the other) Intel Core Ultra 5 325 CPU – Octa-core (4P+4LPE) CPU up to 4.5 GHz with 12MB S…

In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA. View the full article

Fix for gnome desktops to use lightdm lightdm-settings and slick-greeter like other desktops for default View the full article

Description Maint. View the full article

Description Fixing PWM Fan support for NVIDIA Jetson Nano builds based on current (5.19.16-media) and edge (6.0.2-media) kernels. Problem description The problem is that the default parent clock for the PWM on Tegra210 is a 32kHz clock and is unable to support the requested PWM period. Error from dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd071] [ 0.000000] Linux version 5.19.16-media (root@ubuntu) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP PREEMPT Sat Oct 15 13:58:05 UTC …

Description If the argument for the key is a long path like /home/user/tmp/test or a non-existent device, then an awk script error and incorrect data or nonsense is printed on the screen. Split Pull Request [#4691] Checklist: [x] Test on board View the full article

Description Rework of https://github.com/armbian/build/pull/3583 remove left-hook and pre-commit linting as this is now well covered withing build framework and separate linter. @littlecxm Jira reference number AR-1613 How Has This Been Tested? [x] In private repo Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description 'setenv console "display"' in boot-sunxi.cmd & in armbianEnv.txt had the same effect as 'setenv console "both"'. That was due to a false if-statement in boot-sunxi.cmd:41 Fixed that, so 'setenv console "display"' will not co-enable the serial console anymore. No dependencies required. Jira reference number: [n/a] How Has This Been Tested? Test A: Executed mkimage on BananaPi. Yielded results as expected. [x] Test A Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [n/a] I have commented my code, particularly in hard-to-understand areas [n/a] I have made corresponding changes to the d…

removed linked dir for bookworm under desktops put new bookworm desktops into place put new skel files into place for themeing of desktops pre how Igor wants desktops themed added new desktops to the armbian.firstlogin script so new desktops are supported. I took out any duplicate files and shrunk it down to 1 cairo-doc dir in the skel.all dir users can add their file managers to the cairo if they want to. Cinnamon/gnome/icemw/lxde/lxqt/mate/xfce desktops. I fallowed the task-(desktop)-desktop install debian now uses installing all proper files the desktops require . I have run test builds on current desktop and they all build correctly. View the full article

tmpfs: introduce USE_TMPFS=no to disable tmpfs usage for WORKDIR and package-specific working dirs; actually use $temp_dir_id for mktemp; see #5502 tmpfs: introduce USE_TMPFS=no to disable tmpfs usage for WORKDIR and package-specific working dirs; actually use $temp_dir_id for mktemp; see #5502 USE_TMPFS=no disables usage of generic tmpfs mechanism (still possibly used for rootfs/image building, which is unrelated), for last-resort cases use better/more descriptive temp_dir_id's for kernel build than k (now kernel_dest_install_dir) and kd (now kernel_debs_temp_dir) specific image/dtb/headers packaging already had decent names, same for other .deb's replace mktemp -d …

Bumps actions/checkout from 3 to 4. Release notes Sourced from actions/checkout's releases. v4.0.0 What's Changed Update default runtime to node20 by @​takost in actions/checkout#1436 Support fetching without the --progress option by @​simonbaird in actions/checkout#1067 Release 4.0.0 by @​takost in actions/checkout#1447 New Contributors @​takost made their first contribution in actions/checkout#1436 @​simonbaird made their first contribution in actions/checkout#1067 Full Changelog: https://github.com/actions/checkout/compare/v3...v4.0.0 v3.6.0 What's Changed Mark test scripts with Bash'isms to be run via Bash by @​dscho in actions/checkout#1377 Add option to fe…

Description Allow to disable boot partition by explicit BOOTSIZE=0. This would help when bootloader known to support rootfs FS. Allow image_size < rootfs_size for (potentially compressed) btrfs. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Built compressed btrfs-rootfs image with FIXED_IMAGE_SIZE=$((rootfs_size/2)) and without boot partition Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresp…

Description There is no official SDK released for rk3576 so we have to use kernel and uboot from rockchip's internal (beta I guess) repo. I wish this rk3576 family can get deleted when rockchip release new SDK for all rk35xx socs in the future. I created kernel config based on rk35xx-vendor and enabled rk3576 soc support on top of it. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=armsom-sige5 BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=no DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=bookworm KERNEL_GIT=shallow [ ] board booting is not yet…

Description Per Igor comment helios64 required work to sync with upstream changes. I took the liberty to keep more of upstream than in Armbian 6.8, namely: I kept nodes at their upstream location to remove unnecessary work when syncing to the upstream keep "ethernet0 = &gmac;" in aliases, to let the ethernet MAC retrieved from OTP in u-boot apply. This will restore this feature (the u-boot was still functional). U-boot retried ethernet MACs are in u-boot printenv output "ethaddr" and "eth1addr". Seems for a few years I had the Linux kernel autogenerated one but my config still had the correct one commented (I did not find why it broke back then). I removed the overc…

Description This patch has been mainlined in the kernel for both v6.6.37 and somewhere in v6.9.y branch too.. There are several reports that it broke rk3328 pinctrl and, as the worst side effect, eMMC controller does not work anymore on rk3318/rk3328 (reports on the forums: this, this and this) I identified the single line that is causing the issue; reverting the single change fixes the bad pinctrl behaviour in my case. How Has This Been Tested? [x] built and tested kernel 6.6.37 on live system [x] built and tested kernel 6.9.9 on live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My…

Description A recent patch in mainline kernel broke gpio bank2 for rk3328 targets. Several rk3318/rk3328 users described the inability to boot from internal eMMC and other problems (led not working, for example). For reference: forum thread This PR takes the mainline kernel patch from the mailing list and applies the correction patch from https://patchwork.kernel.org/project/linux-rockchip/patch/20240709105428.1176375-1-i@eh5.me/, while waiting for kernel guys to mainline the fix. How Has This Been Tested? [x] Compiled current rockchip64 6.6 kernel [x] Compiled edge rockchip64 6.9 kernel [x] Tested current rockchip64 kernel on a live system Checklist: [x] My code fol…

armbian-install: menu fixes for flashing u-boot to all possible devices; exclude nvme/sata/usb; cosmetics armbian-install: shfmt, no changes armbian-install: menu fixes for flashing u-boot to all possible devices; exclude nvme/sata/usb; cosmetics avoid falling into UEFI installer by accident View the full article

As of today, NVK is a conformant Vulkan 1.4 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1. View the full article

This week’s Armbian development saw a wide range of updates focused on automation, hardware support, and workflow improvements. Key highlights include the introduction of automatic YAML target generation, expanded support for Hetzner ARM64 runners, and enhancements to the redirector update workflow with cache mirror support. Several board-specific fixes and feature additions were made, including improved power cycle handling for meson-sm1 devices and new binary files for RK35 series components. The team also advanced kernel support, notably enabling RDNA2 GPU compatibility and initial kernel 6.18 support for Ayn odin2. Continuous integration and build reliability received…

Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations! View the full article

Seeed Studio’s reComputer J101 & J202 are carrier boards with a similar form factor as the ones found in NVIDIA Jetson Nano and Jetson Xavier NX developer kits, but with a slightly different feature set. The reComputer J101 notably features different USB Type-A/Type-C ports, a microSD card, takes power from a USB Type-C port, and drops the DisplayPort connector, while the reComputer J201 board replaces the micro USB device port with a USB Type-C port, adds a CAN Bus interface, and switches to 12V power input instead of 19V. The table below summarizes the features and differences between the Jetson Nano devkit (B1), reComputer J101, Jetson Xavier NX devkit, and reCompu…

Say hello to a brand new, open-source Vulkan driver for NVIDIA hardware in Mesa, written almost entirely from scratch using the new official headers from NVIDIA. View the full article

Tested Station M1 View the full article

After two years of hosting the event virtually, Brussels will once again welcome attendees on February 4 & 5 on the old stomping grounds of the ULB Solbosch Campus. Collabora will be presenting 8 different talks, in 7 devrooms as well as on the main track! View the full article

The Balthazar Personal Computing Device (BPCD) is an open-source hardware 13.3-inch laptop with a RISC-V, Arm, or FPGA module and designed to be upgradable, expandable, and sustainable. The developers say the laptop is based on a few concepts inspired by the EOMA68 project. The EOMA68 is a CPU module based on the PCMCIA form factor, and an Allwinner A20 EOMA68 module was showcased in a prototype of the Rhombus Tech 15.6-inch Libre Laptop but I don’t think the project was ever manufactured. Balthazar laptop features: SoM with RISC-V, FPGA, or Arm Cortex-A7x processor plus memory and flash Storage – SATA SSD, eSATA connector, microSD card socket Display – 13.3-inch non-glar…

Raspberry Pi Trading has just launched the 1.6MP Raspberry Pi Global Shutter Camera which can capture rapid motion without introducing artifacts usually experienced with rolling shutter cameras such as the earlier Raspberry Pi Camera modules, including the latest Raspberry Pi Camera Module 3. The company sent me Raspberry Pi Global Shutter Camera sample together with a 16mm C-mount lens for review, and I’ll report my experience after going through the specifications of the new camera. Raspberry Pi Global Shutter Camera specifications Sony IMX296LQR-C Sensor Resolution: 1.58 megapixels (color) Sensor size: 6.3mm sensor diagonal Pixel size: 3.45μm x 3.45μm Output – RAW10 Ba…

Description Added support for midstream kernels to the interactive config kernel branch selection. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ x] Interactive configure rock 5B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full ar…

Description Now NVME has the highest boot priority in uboot. But I think SD card should have higher boot priority than NVME SSD because SD card is much easier to plug in/out than NVME SSD. This patch is from https://github.com/radxa/u-boot/pull/25. We can add it to armbian whe it's not merged upstream. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] uboot build successfully [x] Armbian on SD card boots when NVME SSD is installed. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have …

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

hi, I recently bought an Orange Pi 5 Plus and the RTL8852BE wireless module (http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-R6.html). can I add a kernel module to run the RTL8852BE on the Orange Pi 5 Plus? Description Adding CONFIG_RTW89_8852BE to linux-rockchip-rk3588-edge.config How Has This Been Tested? built the img and booted it. checked that RTL8852BE is working (need firmware-realtek). Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code - [ ] I have commented my code, particularly in hard-to-understand areas - [ ] I have made corresponding changes to the docu…

Description There is an orbiting patch that adds True Random Number Generator (TRNG) completing the rockchip mainline crypto driver. This PR introduces the patch (which is in RFC condition, thus passible of changes) with these benefits: provides better entropy (see below) removes the memory region claim error in dmesg is almost in mainline Some caveats: the existing driver covers rk3288 (32 bit, not applicable in this context), rk3328 and rk3399, but only rk3399 seems to have working hardware. For the other two chips, the TRNG is just disabled. How Has This Been Tested? [x] Current 6.6 kernel packages built and installed on live system (rk3399) [x] Edge 6.7 kernel pa…

Description This fixes a lot of labels not getting applied properly. Examples: https://github.com/armbian/build/pull/6763 https://github.com/armbian/build/pull/6758 How Has This Been Tested? [x] To be tested along the way Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description Establish some consistency with extension logging: Add "Extension: ${EXTENSION}: " prefix to some extension logs Make the log messages more consistent throughout extensions. Some extensions use another format: display_alert "message" "${EXTENSION}" "info" These were not adapted to this new schema. Yes I do realize there is probably a better way to do this e.g. by introducing a new display_alert category, like "extension" instead of "info". How Has This Been Tested? [x] Build an image with this enabled, shows more consistent logging Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x…

Bump u-boot to v2024.07 View the full article

Muse Lab’s iCESugar-nano is a tiny FPGA board based on Lattice Semi iCE40LP1K-CM36 programmable via its USB-C port through on-board iCELink debugger, and exposing I/Os for three standard PMOD connectors. The board is fully supported by Yosys open-source toolchain ( Yosys+ nextpnr + IceStorm), and the onboard debugger supports drag-and-drop programming so that you can just drag the FPGA bitstream into the virtual disk to program it through a USB Type-C cable. iCESugar-nano specifications: FPGA – Lattice Semi iCE40LP1k FPGA with 1280 LUT/8KB SRAM/PLL Storage – 2MB SPI flash (W25Q16) USB – 1x USB Type-C port for power and programming Expansion – 14x usable IOs with 1x 12-pin…

Laser ranging has many applications in production and life, such as ranging, positioning, obstacle avoidance, and so on. Time-of-Flight (ToF) ranging, as a type of laser ranging technology, is often used for real-time object detection in robots, autonomous vehicles, and traffic management because of its accuracy, fast response, and low power consumption. The face detection function of mobile phones also uses this technology. This article will introduce the WisBlock RAK12014 ToF laser ranging sensor module, and use the WisBlock development board to demonstrate how the module works. What is a ToF laser ranging sensor module? A ToF laser ranging sensor module uses laser puls…

Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias. View the full article

kde-plasma for debian sid and debian bullseye View the full article

Golioth have released an open-source “ESP-IDF SDK” to let ESP32 hardware connect to their Golioth Cloud, extending existing support from the existing Zephyr SDK. We previously covered the Golioth IoT development platform with a Zephyr SDK supporting nRF9160 and ESP32-C3 (officially), as well as over 100 other platforms, that aims to make it easier for hardware developers to connect things to the internet without needing to know how to use AWS IoT, Azure IoT, or the other cloud services. While in theory, it would be possible to keep using the Zephyr SDK on ESP32 hardware, the ESP-IDF framework is the main tool of Espressif Systems, and they will release new code to that ec…

MediaTek T830 is a consumer premise equipment (CPE) SoC with a quad-core Cortex-A53 processor, an integrated Sub-6GHz 5G modem, hardware-based network acceleration engines,and optional support for Wi-Fi 6/6E, and son the new WiFi 7. It’s unrelated to the MediaTek Filogic 830 WiFi router SoC and instead, offers an upgrade to the MediaTek T750 5G chipset for higher performance multi-gigabit CPE products, such as fixed wireless access (FWA) routers and mobile hotspots (Mi-Fi) with up to 7 Gbps 5G speeds. MediaTek T830 specifications: CPU – 4x Arm Cortex-A55 cores @ up to 2.2 GHz GPU – Unnamed 3D GPU Networking accelerators MediaTek Network Processing Unit QoS Acceleration an…

Description Update JetHub D1 (j100) u-boot patchset to buildable state. Jira reference number AR-1310 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] fixes jethub_j100 build [X] no other changes View the full article

Amlogic S928X multi-core Cortex-A76/A55 8K media processor, which may have been initially known as S908X, is being showcased at ICB2022 in Amsterdam in the “SEI 8K Box” developed by SEI Robotics. Amlogic S908X/S928X was first discovered in a roadmap in 2019 and was expected to launch by the end of 2020 at the time. But after a long wait of nearly three years, the Amlogic S928X processoris finally showing in SEI 8K box with an HDMI 2.1a 8K video interface, supports for HDR and advanced audio codec like Dolby Atmos and DTS, and support for Smart Home functions through an IoT module with WiFi 6E, Zigbee and more. SEI 8K box preliminary specifications: SoC – Amlogic S928X mul…

CNXSoft: This is a guest post by Florian Robert (1technophile) of the OpenMQTTGateway project about using a 433 MHz LoRa transceiver on an ESP32 board for home automation, specifically to talk to 433 MHz sensors Everyone is talking about Matter, Bluetooth, Zigbee, and Zwave, but before these complex communication technologies, we had one simple, robust one that our sensors and devices used to leverage: 433MHz. It may be too simplistic to talk about 433 MHz as a technology as there are different and various usages of this frequency. You can find it being used in numerous devices around your home, from your outdoor temperature sensors, and security sensors to the tire press…

Most people will probably want to run Linux on their Arm SBC, but Windows 11 could also be an option with the Rock 5B and other single board computers based on Rockchip RK3588 and other powerful Arm SoCs thanks to the Windows on Raspberry project. The project, also known as “Windows on R” is maintained by Mario Bălănică who recently tweeted a screenshot showing Windows 11 running on the Radxa ROCK 5B SBC powered by a Rockchip RK3588 Arm Cortex-A76A/A55 clocked at 1.2 GHz (instead of the usual 2.2/2.4 GHz), but with USB 2.0/3.0 and display interface apparently working just fine. PCIe appears to be detected, but not working. He also noted that virtualization worked out of t…

Description Those are just small left over fixes for AR-1444 How Has This Been Tested? [ ] Manual repo generation Checklist: [ ] My changes generate no new warnings View the full article

Description Some users reported bluetooth not working sometimes after reboot. Turns out that sometimes hciattach binary that we use segfaults during reboot. Replacing the binary with the one present in orangepi_build repository as it seems it solves the issue. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by the user by rebooting their device 5 times. Bluetooth worked fine consistently after every reboot. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my cod…

Description packages.debian.org has been down a lot lately, so builds could not finish since the build system wants to find out the package name and version for base-files. Use Packages.gz from the mirrors as an alternative method to search for this information. How Has This Been Tested? [x] Building works as normal even if packages.debian.org is down Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

Description Mount option commit=600 (=10 minutes) seems pretty high. Reduce it to 120 for ext4 (default for ext4 is commit=5) and 120 for btrfs (default for btrfs is commit=30) to reduce risk of losing data on power loss. Only verly low settings (maybe 1-10) will have impact on performance according to documentation. From ext4: commit=nrsec (*) This setting limits the maximum age of the running transaction to ‘nrsec’ seconds. The default value is 5 seconds. This means that if you lose your power, you will lose as much as the latest 5 seconds of metadata changes (your filesystem will not be damaged though, thanks to the journaling). This default value (or any low valu…

Docstrings generation was requested by @rpardini. https://github.com/armbian/build/pull/7982#issuecomment-2746385084 The following files were modified: lib/functions/bsp/armbian-bsp-cli-deb.sh ℹ️ Note CodeRabbit cannot perform edits on its own pull requests yet. View the full article

This week in Armbian development saw significant progress across board support and kernel updates. New boards such as the Cainiao CNIOT Core, EByte ECB41-PGE, DG SVR 865 Tiny, and NORCO EMB-3531 received initial support, expanding hardware compatibility. Kernel patches were rewritten for the meson64 and rockchip64 platforms, aligning with version 6.18.18, while edge releases were bumped to 7.0-rc3 and rc4. Improvements included enhanced SD card and audio support for SpacemiT and Youyeetoo YY3588 boards, as well as refined configuration checks and display fixes. Several upstream patches were dropped or disabled, and the Dependabot schedule was updated for daily maintenance…

Description Restore Rock64 and RockPi 4A/4B/4C builds. How Has This Been Tested? It hasn't yet. Need to get these changes integrated to the build system so I can test the images on the SBCs :) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems. View the full article

Description Here is a upstream api change in 5.19.2: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/include/media/hevc-ctrls.h?h=v5.19.2&id=dfacf78ed98c8e64ac39a5fd6aa9075bfccc3b3e. I notice that there're patches conataining the old api pic_order_cnt in rk322x-5.19 and sunxi-5.19, so maybe they should also get fixed. @paolosabatino @The-going How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Kernel build success [x] v4l2-compliance success Checklist: [x] My code follows the style guidelines of this project [x] I have performed a s…

MuseLab USB-HS-Bridge is an inexpensive ($5) board based on WCH CH347 chip with a USB 2.0 Type-C interface that acts as a bridge for I2C, SPI, UART, and JTAG interfaces, as well as GPIOs. It’s notably useful to debug and download bitstreams to FPGA development boards, but it can also be used to connect various peripherals such as I2C sensors, SPI flash devices, UART devices to basically any host with a spare USB 2.0 host port. USB-HS-Bridge specifications: Chip – WCH CH347 high-speed USB to UART, I2C, SPI and JTAG chip (See link to the datasheet for details) USB – 1x USB 2.0 Type-C port with up to 480 Mbps data rate I/Os – 2x 16-pin header with 2x UART interfaces up to 9 …

Description Minor fixes to led-conf6, default phase shifting for emmc controller se to 90° instead of 180° that was causing some eMCP to be not detected even in high-speed mode How Has This Been Tested? Quick check directly on a live installation Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Mele PCG02 Pro is a mini PC stick / PC-on-a-stick powered by either an Intel Celeron J4125 Gemini Lake processor or a more recent Celeron N5105 Jasper Lake processor, with support for M.2 NVMe/SSD storage, but only for the Gemini Lake model. The computer is also equipped with 8GB LPDDR4 memory, 128GB to 512GB eMMC flash, two HDMI 2.0 ports capable of driving two independent displays, a Gigabit Ethernet port, WiFi 5 or 6 connectivity, and more. MeLE PCG02 Pro specifications: SoC (one or the other) Intel Celeron J4125 quad-core Gemini Lake Refresh processor @ 2.0 / 2.7 GHz (Boost) with 12EU Intel UHD 600 graphics @ 250 / 750 MHz; 10W TDP Intel Celeron N5105 quad-core Jasp…

Description USB3 has been enabled in mainline since 2021 View the full article

Vecow ECX-3200 is an expandable, fanless embedded system powered by Intel 13th generation Core i9/i7/i5/i3 Raptor Lake-S processor or 12th generation Alder Lake-S processor designed for rugged Machine Vision, AMR, Rolling Stock, Smart Retail and Edge AI applications. The ECX-3200 supports up to 64GB DDR5, SATA & NVMe storage, offers four 2.5GbE RJ45 or M12 ports with PoE+ on the rear panel, plus one additional Gigabit Ethernet port and a 2.5GbE port on the front panel, four video outputs up to 8Kp60 resolution, several USB 3.2 ports up to 20 Gbps, some serial ports, as well as isolated I/Os. Vecow ECX-3200 specifications: SoC Up to 24-core 13th Gen Intel Core i9/i7/i5…

Description This PR adds support for Recore A5, A6, and A7 hardware. Recore is a 3D printer control board based on Allwinner A64. Since the board uses the AR100 for real time stepping, the SCP is disabled and instead a version of Klipper is loaded instead. How Has This Been Tested? The patches have been tested by building the current and legacy kernels with the minimal images. [ ] Minimal image with current kernel [ ] Minimal image with legacy kernel Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding c…

Description Update odroidxu4-current kernel to 6.1.63. How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article