-
Popular Tags
-
Upcoming Events
-
-
Giveaways
-
Volunteering positions
-
Code reviewer
Position: Framework maintainerNumber of places: UnlimitedApplicants: 5 -
Marketing Coordinator
Position: Marketing CoordinatorNumber of places: 2Applicants: 0
-
-
Chat | Social Media
#armbian at
irc.libera.chat or irc.oftc.net
Matrix or Discord
Mastodon | 𝕏 -
Popular Now
-
Activity Stream
-
4
Dead board with RK3228A after first boot to armbian
Hello, both the versions you used share exactly the same kernel, so it is unclear to me the reason only the Jammy image boots. Actually, I don't understand why you did not use the multitool to install the armbian image and doing maintenance, but however... You can actually edit /boot/armbianEnv.txt and set verbosity=7 to have more kernel logging and perhaps something will pop up. Hint: dmesg log is basic stuff to do debugging, if you can provide it, it could be very useful. -
2
Install to vim4
So it just boots directly to oowow. There is a menu item for shutdown or reboot. Reboot tells you to remove any sdcards beforehand. So I didn't. And the sdcard booted. It has installed, and reboot works. I installed to emmc and nvme. So far so good. Tried the ts1040 screen once. It might ve not been plugged correctly. Dead computer. I need to try the other direction. Copper down. -
3
G96 mini with RK3228A bricked or bad RAM
I guess the older bootloaders does not work at all with eMCP chip, if I remember correctly you need at least ddrbin v1.09 when you have an eMCP. It could be that your board came with an even newer ddrbin or something a bit customized. I guess you should ask the vendor for the original firmware and install it again to solve the issue if the command rate switching did not change anything. -
3
G96 mini with RK3228A bricked or bad RAM
Hello, thank you! I tried changing this bit in multitool-1.11 but the result is the same. I could not locate the bit in the older bootloader, the one that ran one step further. The bootloader is RK322XMiniLoaderAll_V2.47_MarcosTvBox.bin mentioned here in the last message: -
2
Install to vim4
Reverified the sdcard image. The board boots directly into oowow. I dont see an obvious way to tell it to boot from sdcard. Holding the function button on power up does nothing.
-
-
Member Statistics