Turgus
-
Posts
88 -
Joined
-
Last visited
Reputation Activity
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
Version 20200921 .
Kernel 5.8.10.
U-boot-2020.10-rc4.
Please note that the default DTB specified for rk3399 has changed. before starting, make sure to check this setting for your model.
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
ver 20200901-dev fix USB gxl\gxm
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
The new version of the image is 20200820.
The configuration for the core build has changed significantly.
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
ver 20.08 (20200812) kernel 5.7.14
-
-
Turgus got a reaction from amirul in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
Thank you @balbes150 for the new bionic build!
Armbian_20.05.6_Arm-64_bionic_current_5.7.2_20200612.img.xz (plus via armbian-config added desktop) runs nice from internal on two newer(those strange ver. 4.x pcbs with wifi and bt working..) and one older/normal (no wifi) x96minis 2/16 with all programs I want/need at low temperatures(around 60°C).
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
Version 20200612.
Kernel 5.7.2.
updated the build system, supported build on aarch64 Focal.
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
Version 20200605.
Added WiFi support for Allwinner Tanix TX6 (H6).
-
Turgus reacted to Novato in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
It worked, thank you very much for the information, I was very lost here. Now everything is going smoothly.
-
Turgus got a reaction from manuti in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
I guess it is more a new installation than an update what you want..because I have just p281 devices with s905w chip I can only write how I proceed on these devices, but as s905x and s905w are quite similar, that should work for you too: Burn image on card, configure that dtb is working for your hardware in uenv.txt"Complete copy OS to eMMC "
If new system runs good from sd card, just boot from it, open a terminal and type:
sudo /root/install-aml.sh after few minutes the script should have copied(/usr/ takes a while..) the stuff to eMMC and prompt:"Complete copy OS to eMMC "
If that fails to reboot 20.05.5 image from internal after that, maybe try in terminal on boot from card to copy (again):
sudo /root/install-aml-s905-emmc.sh ..but for me on 5+ amlogic p281/p212 devices install-aml.sh works perfect..
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
Version 20200519.
This version is fully built not mediocre on the ARM platform (rk3399).
I checked how the images work on different models, and no problems were found. The system works identically to the version built using the old scheme via cross-compilation on x86. While these images do not have u-boot and to run from the SD card on RK3399 add u-boot, as described at the beginning of the topic.
Now anyone can build their own version of ArmbianTV not mediocre on their device.
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
ver 20200514 kernel 5.7-rc5
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
Contact the hardware manufacturer to develop and source the correct DTB for the mainline kernel with support for all devices for your models.
-
Turgus got a reaction from efendi in ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)
For me on the x96mini work all/most versions until 19.11.4 (the 19.11.5s I tried didn't boot or booted but had no usb working) with the meson-gxl-s905w-p281.dtb
For me worked to boot via toothpick method after doing the fake update(there was the footer error, but afterwards balbes' Libreelec booted from card..). Afterwards I can boot any of the armbian images before 19.11.05 on the x96mini 2/16. Install on eMMC works too, but for newer (universal boot images) install has to been done not via armbian config tool like on 5.9x-builds, but via install script in root directory. To get the install successful you need to delete rk and aw u-boots on card as boot partition on eMMC is just 128mb but with all u-boots it is more.
For newer builds 19.11.5 and on I have to ask in mulit platform thread, why those doesn't boot for me with same dtb settings I use for years on that device..
-
Turgus reacted to balbes150 in Single Armbian image for RK + AML + AW (aarch64 ARMv8)
If after adding u-boot does not start, add UART and see what happens.
-
Turgus reacted to AndrewDB in Armbian for Amlogic S9xxx kernel 5.x
And yet again, duct tape saves the day!
-
Turgus reacted to balbes150 in Armbian for Amlogic S9xxx kernel 5.x
If everything works at 5.0, there's no point in dropping to 4.20.