balbes150
-
Posts
4440 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Everything posted by balbes150
-
How to get audio in Gnome for Station M2?
balbes150 replied to Jeremiah Cornelius's topic in Rockchip
It is not supported, so no one checks this environment -
VisionFive v2 - an interesting sequel to VisionFive (StarFive) https://forum.rvspace.org/t/how-to-purchase-visionfive-2/665/9
-
If eMMC is visible, the process is possible, but pay attention, I have not checked this mode and the consequences are not known.
-
I don't have this equipment and I have no idea what it requires.
-
https://forum.pine64.org/showthread.php?tid=16312
-
No
-
tag rk3588s
-
It uses a BSP kernel, with a built-in video driver, the source code is closed and it is not in the main kernel (which is used in my builds). Try to add a forced video output setting via command line parameters (add the desired values to extlinbux.conf). If this package is not in the network repositories, then it was assembled manually for stock firmware and you will not be able to use it for a simple installation. You can try to migrate the binaries, but I do not know if they will work or not.
-
ver 20220819 for Starfive and Allwinner D1 kernel 5.19.0
-
ver 20220819 fix HDMI sound and analog sound
-
The first version of Armbian images for Station M3 rk3588s (rk3588s-roc-pc) is available. the launch is very simple - download, unpack, burn to an SD card, connect to the device and turn on the power. The system starts automatically. At the first launch, perform the initial setup in the same way as all Armbian-enabled devices. https://disk.yandex.ru/d/-zSW21XKN0pfIA
-
The overlay works normally in a running system. See this topic. The kernel already has everything, you only need to add the necessary overlay immediately in a working system. No complicated steps with old u-boot scripts are needed. You can change everything on the fly in a running system. https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/guides/dt-overlays.md.html#32-loading-overlays-via-configfs
-
The system is running, see the topic above, there is no output to UART after that, everything goes to HDMI. Therefore, for the first setup, you need an HDMI and USB keyboard.
-
Ver 20220729. VisionFive kernel 5.19-rc8
-
Test version with EFI\Grub support (with HDMI output) for rk3399. for station p1 https://disk.yandex.ru/d/HZ34T76zxS9pnw for nanopc t4 https://disk.yandex.ru/d/SjBMYJ37U6699A firefly-rk3399 https://disk.yandex.ru/d/BfrzRRyvdtavIg
-
This model does not have a built-in LAN port (which can be automatically configured at the first start via DHCP, so that you can connect via SSH from a PC and perform the initial configuration of the system and WiFi). Therefore, for the first launch and setup, you need either an HDMI and USB keyboard, or a USB-LAN. It doesn't make any difference, it's just a historically established name for my development branch.
-
I don't have rock 3a, I don't know what's wrong with it. I described the facts, I regularly run a test video on the devices indicated in the message and the video is played without problems in Armbian in a window or on full screen (regular video playback programs are used, mpv\celsior). I have not changed FFMPEG in Armbian. In Libreelec, I can enable the display of information when playing a video and it says that HW is used (but not for all formats). But even with SW decoding, test videos play well up to 1440p (DE is set to 1080p).
-
I tested (Armbian and Libreelec) the rk356x (Station P2\M2 Quartz64 Banana PI r2 pro) - it plays 1080p video in MPV\KODI without any problems kernel >=5.17.
-
Ver 20220718 kernel 5.18.12 and 5.19-rc7 Ver 20220719-EFI test version that uses EFI\Grub to run (kernel 5.19-rc7).
-
This is the initial development version and I have not tested its use with Docker. There may be errors\missing necessary settings\dependencies. If you have the information and you have checked what is missing to run the build in Docker, you can send a PR or write your steps, what and where you added.
-
Alpha version 20220714 of Armbian images with EFI\GRUB support. Tested on Quartz64 A. If there are users of other models here, it is interesting to check the work of UEFI\GRUB on other Quartz64 models. https://forum.pine64.org/showthread.php?tid=16312&pid=111453#pid111453
-
Version 20220710 for SfarFive. Important change, Ubuntu\Armbian switched to using UEFI. Debian\Armbian will be switched to using UEFI in the near future, while several packages necessary for UEFI are missing in Debian network repositories for riscv64, with the release of these packages in Debian network repositories or I will temporarily use DEB EFI packages from Ubuntu, Debian images will also be completely switched to the UEFI startup system (grub). It is welcome if there are participants who are ready to help with porting the necessary DEB EFI packages for Debian. By the way, Rick is actively working on adding new DE for RISC-V in Armbian, several new DE will be ready soon, if you are interested in specific DE, write to this topic, it will help determine which direction to do first.
-
Added alpha version of image build support for RISC-V. So far, this is an early version and some of the functions do not work in it. Currently, support has been added for the StarFive model. https://rvspace.org/ Details can be seen in this topic. https://forum.rvspace.org/t/armbian-for-starfive-build-system-ubuntu-debian/468 Added support for Nezha D1 and Lichee RV (Dock) with Allwinner D1 RISC-V chip. To start the system. Download the image, unpack it, burn it to the SD card. Connect the SD card to the device and turn on the power. Further steps for initial setup are similar for all Armbian systems. For the Nezha D1 model, HDMI, LAN, USB, analog audio via 3.5 jack works. For Lichee RV Dock works HDMI WiFi USB USB-LAN Link to download images. https://disk.yandex.ru/d/da8qJ8wyE1hhcQ https://www.cnx-software.com/2021/12/30/sipeed-lichee-rv-risc-v-module-gets-5-carrier-board-with-hdmi-and-usb-ports-optional-wifi/ forum MangoPI https://forum.mangopi.org/
-
New version ArmbianTV of images for RK3288 and RK3188. rk3288 \ rk3188 https://mega.nz/#F!j9QSDQSQ!6WpasOlbZYIInfw6yo4phQ rk3188 https://disk.yandex.ru/d/7wqSh5Z5bv9q1g?w=1 rk3288 https://disk.yandex.ru/d/fRZwre9HDgAKHw?w=1 This link contains images with Libreelec for rk3288 and rk3188, testing these images can help with the development of media functions for rk3288 and rk3188. https://disk.yandex.ru/d/8vNYuuxynz1L0w?w=1