Jump to content

balbes150

Members
 View Profile  See their activity

  • Posts

    4435

  • Joined

  • Last visited

 Content Type 

Posts posted by balbes150

    Armbian image and build support for RISC-V.

    in RISC-V

    Posted

    Version 20230930-current for Nezha and other models based on Allwinner D1.

    U-boot has changed. Added support for direct system startup from USB. This will make it easy to run additional systems without changing the SD card, simply by connecting a USB flash drive with the new system. Launch from USB on Nezha and Mangope MQ Pro models has been tested. On theLicheRVr model, the USB flash drive has not been determined, perhaps another USB flash drive model is needed.

    0

    Armbian + EFI\grub + NVMe

    in Rockchip

    Posted

    16.09.2023 в 00:29, archetech сказал:

    Can you build and post a zip of ubu lunar with pancsf drm enabled so I can test the new mesa driver for it please.  Could use some temp senors too.  sensors-detect finds nothing.

    Ver 20230928-current.

    0

    VisionFive-2 (jh7110)

    in RISC-V

    Posted

    17 часов назад, AndyW сказал:

    Booted again (stopped autoboot by hitting key) and did a "printenv" so you can see if the changes above worked, then turned device off. Attached file "boot-printenv.txt" shows this

    Thanks for testing, I see the bootcmd variable has not been updated. It looks like one line was lost when creating the variable update image. Now I will fix the images and upload them to the site.

     

    Replaced the images with corrected versions. Run both images again (reset settings and update variables). After that, everything should work without manual additions.

    0

    VisionFive-2 (jh7110)

    in RISC-V

    Posted

    Version 20230922-edge with kernel 6.6-rc1

     

    I also added images to update the latest official version of u-boot 3.6.1 for SPI\Flash to easily run any system on VF2 from an SD card and NVMe. After switching to u-boot-3.6.1 and updating using the provided update images, you can easily install Armbian on NVMe and run the entire system with NVMe. The procedure for switching to u-boot is 3.6.1. Update u-boot in SPI\Flash according to the instructions from the official VF2 documentation page. Download, write to the SD card and run two images sequentially - first run reset-default-env-uboot-visionfive2-3.6.1.img (after launching the update, wait 10-20 seconds and turn off the power), then write to the SD card and run update_uboot-visionfive2-3.6.1.img (after launching the update, wait 10-20 seconds and turn off the power). After these procedures, you can easily run Armbian SD cards or install it on NVMe (using the standard armbian-config mechanism and choose the installation option on MTD\SATA\NVMe). Please note, for proper installation on NVMe, a section must be prepared there, i.e. the installation process corresponds to the description of the Armbian installation documentation on NVMe. It is possible to add the u-boot upgrade procedure to the standard armbian-config procedure for installing the system on NVMe, so that the whole process takes place automatically, but I have not yet decided whether to add it or leave the u-boot upgrade process in SPI, as described in the documentation for VF2

     

    Please note that these updates do not violate the previous official launch procedure in u-boot SPI\Flash.

     

    Link image update

    https://disk.yandex.ru/d/O4lr6WrGdUvydw

    0

    Armbian + EFI\grub + NVMe

    in Rockchip

    Posted

    9 часов назад, archetech сказал:

    Can you build and post a zip of ubu lunar with pancsf drm enabled so I can test the new mesa driver for it please.  Could use some temp senors too.  sensors-detect finds nothing.

    As far as possible, I will see what can be done.

    0

    Firefly Station M3 (rk3588s)

    in Rockchip

    Posted

    Ver 20230911-EDK2-EFI kernel legacy\current\edge 

     

    On the edge version, HDMI does not work in the kernel itself, but HDMI is supported at the level of the selection menu in GRUB, this allows you to have several different versions of the kernel\system (for example, add a self-assembled EDGE kernel with its own configuration) and choose on the monitor screen which kernel\system to run not using the UART console.

    0

    Khadas EDGE2 + kernel 6.x + panfrost

    in Khadas EDGE2

    Posted

    Ver 20230911-EDK2-EFI kernel legacy\current\edge (the startup works from an SD card).

     

    On the edge version, HDMI does not work in the kernel itself, but HDMI is supported at the level of the selection menu in GRUB, this allows you to have several different versions of the kernel\system (for example, add a self-assembled EDGE kernel with its own configuration) and choose on the monitor screen which kernel\system to run not using the UART console.

    0

    Armbian + EFI\grub + NVMe

    in Rockchip

    Posted

    Ver 20230911-EDK2-EFI kernel legacy\current\edge 

     

    On the edge version, HDMI does not work in the kernel itself, but HDMI is supported at the level of the selection menu in GRUB, this allows you to have several different versions of the kernel\system (for example, add a self-assembled EDGE kernel with its own configuration) and choose on the monitor screen which kernel\system to run not using the UART console.

    1

    Kernel 6.2 (HDMI USB LAN etc) for OPI5

    in Orange Pi 5 / 5B

    Posted

    Ver 20230911-EDK2-EFI kernel legacy\current\edge 

     

    On the edge version, HDMI does not work in the kernel itself, but HDMI is supported at the level of the selection menu in GRUB, this allows you to have several different versions of the kernel\system (for example, add a self-assembled EDGE kernel with its own configuration) and choose on the monitor screen which kernel\system to run not using the UART console.

    2

    VisionFive-2 (jh7110)

    in RISC-V

    Posted

    03.09.2023 в 23:28, AndyW сказал:

    I did install 2.11.5 and your updater then worked. However, I am still unable to run anything with kernel 6.5. All other releases work fine.

    I have not tested the work of u-boot 2.11.5, but with the default u-boot + update, everything works with all kernel versions, including 6.5. Show the UART log of running kernel 6.5 from 2.11.5.

    0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept