constantius
-
Posts
231 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by constantius
-
-
I can see ttyS0 - S11 ports but there is no ttyUSB* ports
-
I just tried flash emmc on Poplar 96Board. I compiled software - linux but cant connect the board via host ( ubuntu 18.04) serial port - USB port Poplar SBC
-
1. screen /dev/ttyUSB0 115200 - no such file or device
2. dmesg | grep -i tty
[ 0.000000] console [tty0] enabled
[ 0.676317] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A3. user added to dialout
4. minicom -s added /dev/ttyUSB0 in serial port settings
5. lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 03f0:134a Hewlett-Packard Optical Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub6. ls -l ttyUSB0
no access to the ttyUSB0 there is no such file or device7 .ls /dev/ | grep ttyUSB0 . No output. It means the device is not there
8 still no ttyUSB0 working i dont know why -
A 32 bit image would be suitable for la frite. Well, that's how the sever minimal option remains. But what of this server - none ... Rather, I will wait for 32 bit raspbian from lover pi but I do not expect miracles.
-
hi
Quite similar situation occurs with the banana M2 A64 Allwinner. I have one of the beginning of production and the second of this year. On the first boot, everything about Armbian. On the second only to the kernel 4.14. Above 4.14 you have to use the image with pine64 +. I will not give you memory numbers because I have already covered with heat sinks.
-
52 minutes ago, crazystick said:
-
46E
-
I am sorry I have already blurred these numbers on the bottom, 46E and I still do not know
-
15 minutes ago, Vlado said:
So, it works?
will be good if write here chip model where it run
my is K4B4G1646D-BCK0 (728)
yes works thanks a lot
i have edited this.: https://www.armbian.com/nanopc-t3-plus/
it depends from memory number
my is .; SEC710 K4B4G16 - the last edition - i bought that on june 2019
-
53 minutes ago, Vlado said:
Should be
OK finally i have prepared mini how to .:
1. Burn Armbian image > 5.90 into micro sd-card
2. Download and install HEX editor into your windows machine
https://mh-nexus.de/en/hxd/
3. Run Hex as admin
4. Open in HEX your sd-card device ( phisical disk not logical )
5. Set up program in make of copy disk before write6. Change offset example to 9 numbers
7. Find and change the memory value for offset 000000260 and write 01DE1010
It Should be
000000260 01 C8 0C 10 01 66 08 50 01 DE 10 10 04 01 66 66
6. Save
7. Its done
8 Boot Nanopi T3 PLUS from micro sdcard -
hi
Are you sure that it has to be 01DE1010?
When i open sdcard as the local drive it has 9 numbers not 8 ( offset )
When i open img file it has 8 numbers and i have 01DE1010 but that is empty space
I use HxD
-
ok i have installed okteta. But which file have I to edit on sd-card?
-
sory im not developer. I dont know about you speak
-
Can anybody explaned me in which file on sd-card i should put 0x00000268 (01DE1010)?
Thanks
-
it also can be changed in img on SDcard (may be faster way) 0x00000268 (01DE1010)
I still dont understand... Where in img? Path to the file?
-
Can you write where i should make a change? what does mean in bl1
-
nothing is working.. i have tried The last Ubuntu 5.90 and Buster 5.91. Still segmentation fault. In fact kernel is the same...
-
which does kernel version work? or which armbian image do you use?
-
Hello
Is it possible to upgrade by changing debian repositories as for x86_64?
Or do you need to flash a new image on micro-sd?
-
Hello
Did you run debian with emmc? On the forum loverpi again describe problems with flashing emmc. This is supposed to depend on which of the usb ports you put sd-card on. It seems that this is just another approximation to the goal. It has grown terribly and I do not want to read it all. It seems that if the armbian team does not take it for it will be hard. Please do not treat this as a reminder. It's sarcasm. That's why I decided on a small monthly donation. Maybe in China they can produce SBC but their software is always susceptible to it being. I am angry because I damaged the emmc module myself from this fastening and unpinning. -
It does not metter which program you will use to flash sd-card
-
http://share.loverpi.com/board/libre-computer-project/libre-computer-board/image/debian/
yes two another version with desktop and 4 headlines
Im courius if they are good.. lets try
-
Hello
I have info from libre that their debian img is broken alpha version.
-
Hi
La Frite S805X
I have problem with detection emmc module Debian Stretch provided by Libre Computer.
1. Put micro-sd card with flashed Debian 9
2. put power
3. boot from micro-sd
4. login
5. Mount emmc module
6. lc_redetect_emmc - no vendor found???
emmc module is good - working on la potato -im enable to flash armbian
7.What is wrong?
-
OK I understand.
Armbian from pine64 the first version, kernel 4.19. works. Never mind.
screen /dev/ttyUSB0 115200 no such file or device
in Off-topic
Posted
Hi
Host amd64 Ubuntu 18.04 serial console input
SBC - poplar 96 Board ARM Hisilicon- USB input or microUSB ( i have switch )
what kind of adapter ?... no name from aliexpress just female serial adapter plug into male serial port PC
on the other side USB 2.0