constantius
-
Posts
223 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by constantius
-
-
there was no sarcasm or malice. your delusional inter-recipe. I built an armbian 5.46 bionic and xenial two images. In both there is an old mistake with the meson8b-dwmac player. simply eth0 turns off after 3-5 minutes.Fortunately, there is wifi. I do not mind. after the changes everything works de luxe. browsers and other software I use all the time from yesterday from 15 o'clock and the system has never hung up. Also, I am happy thank you for the work you have done. It's good.
-
repeated and works strange
-
nanopik2-s905 is correct
-
system of course Ubuntu 16.04
-
script downloaded today
-
./compile.sh BOARD=nanopik2 BRANCH=next KERNEL_ONLY=no RELEASE=bionic
xenial the same error
-
I have tried to build image... for Nanopik2 bionic
ERROR in function source [ main.sh:172 ]
[ error ] Board configuration does not define valid kernel config -
"Tony MAC.; If you can build it yourself I've just pushed an update on the K2 to go to u-boot 2018.03, which has a ton of improvements to the handling of memory/device drivers. I need to do some more tests on K2, but since it was broken before I felt the limited testing I've done so far has been sufficient".
Yes please i will build the image myself
-
I reported the armbian to the linux distrowatch portal. The rankings are raspian and bananian and there is no armbian.
www.distrowatch.com
sent to .: jsmith@distrowatch.com
https://www.armbian.com/
Hello
Why this distribution is not in the rankings ?
They have existed since 2013
the best linux distribution for single board computers...
You rank raspbian and you dont rank armbian ?????
best regards
RADEK FROM POLAND
-
after lost eth0 and switch to wlan0.:
ifconfig
eth0 Link encap:Ethernet HWaddr c2:2d:dc:69:09:b8
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6805 errors:0 dropped:0 overruns:0 frame:0
TX packets:4405 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7294757 (7.2 MB) TX bytes:1189808 (1.1 MB)
Interrupt:17lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:463 errors:0 dropped:0 overruns:0 frame:0
TX packets:463 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34169 (34.1 KB) TX bytes:34169 (34.1 KB)wlan0 Link encap:Ethernet HWaddr b0:f1:ec:29:d5:5a
inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::bc1b:678c:a64a:b67c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3080 errors:0 dropped:0 overruns:0 frame:0
TX packets:2584 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3017837 (3.0 MB) TX bytes:973929 (973.9 KB)
-
this is from nano pi k2 - for odroid c2 i already formatted micro-sd card and removed bionic from using
-
ifconfig
eth0 Link encap:Ethernet HWaddr c2:2d:dc:69:09:b8
inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::bef9:68eb:35ba:dabc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2597 errors:0 dropped:0 overruns:0 frame:0
TX packets:1839 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2651519 (2.6 MB) TX bytes:846389 (846.3 KB)
Interrupt:17lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:104 errors:0 dropped:0 overruns:0 frame:0
TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8882 (8.8 KB) TX bytes:8882 (8.8 KB)wlan0 Link encap:Ethernet HWaddr b0:f1:ec:29:d5:5a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0
TX bytes:0 (0.0
ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: external
Auto-negotiation: on
Supports Wake-on: ug
Wake-on: d
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes
armbianmonitor -u
System diagnosis information will now be uploaded to http://ix.io/1b8JKernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default gateway 0.0.0.0 UG 100 0 0 eth0
link-local * 255.255.0.0 U 1000 0 0 eth0
192.168.1.0 * 255.255.255.0 U 100 0 0 eth0
-
guidol it is no problem with automatic upgrades .. i usually uninstall unattended-upgrades and I dont use it.
OK finally.; I report that such a problem exists and I ask you to keep this in mind as the bionic will come out of the test. There are many images that I do not have to immediately have ubuntu 18.04. The problem concerns the odroid c2 and nano pi k2, kernel 4.14, armbian kernel more than 5.38. Thank you for your attention, I wish you a good evening.
-
I see that we boast about the number of single boards I have:
VS Mecool RK3399 FireFly RK3399 OrangePI RK3399 , Odroid XU4 Asus Tinker MIQI Cubieboard 4 Khadas VIM2 FA NanoPiM3 Rock64 Odroid C2 FA NanoPI K2 Khadas VIM1 Minix Neo X7 Cubieboard 5 BananaPiM3 Pine H64 , Le Potato, Renegade from Libre computers , Orangepi Lite 2 Orangepi OnePLUS RaspberryPI 3+ OrangePI Prime OrangePIPC2 Pine A64-LTS OrangePI WIN PLUS BananaPIM64 Pine 64+ FA NanoPIA64 NanoPIM2 BananaPiM2Ultra OrangePi2PlusE OrangePi2 BananapiM2+ Odroid C1+ Hummingboard BananaPiM2 RaspberryPi2 Olimex Lime2 Creator CI20 , ( Nano pi K1 plus - iam waiting for delivery form china. )
I use it in production on a daily basis tasks and I can tell every model which one is sucked up, which overheats, does not hold the cpu clocking that the image that works on it. I can also say a lot about micro-SD cards. I use finally only sandisk and samsung.
-
kernel 4.14 invalid images
-
memory is good. I hava 6 images on 6 different micro-sd cards. 1. Armbian 5.38 Jessie XFCE / 2. Android 6.0.1 / 3. Harkernel Ubuntu 16.04 Mate 1.12.1 / 4. Armbian 5.30 XFCE Ubuntu 16.04 / 5. Armbian 5.43 Debian 9 XFCE / 6. Armbian 5.44 Ubuntu 18.04 XFCE ... sory android not that story but works perfectly. Ubuntu 16.04 Mate from Hardkernel team. works perfekt. Armbian Jessie 5.38 works perfectly but slowly maybe slow micro-sd... never mind no problem, - stmmaceth driver. All these images works but strange is that Armbian 5.43 Debian 9 is on meson8b-dwmac driver and works also !!!!
Problem is Armbian 5.44 Ubuntu 18.04 - driver meson8b-dwmac.... lost connection very quickly 3-5 minutes...
I have also Nanopi K2 Armbian 5.38 ubuntu 16.04 also driver meson8b-dwmac. also lost connection but after 10-15 minutes. Needs more time to crash. But this have wifi and i can switch to wifi. But this image hangs very often without purpose. I think when i use browsers.
I really check everything. manualy configured eth0, interfaces, network manager install uninstall, edit resolv.conf... etc. Every time the same strange story. After reboot eth0 exist and when i run apt-get upgrade or apt-get install packages i have lost internet. Just doing nothing only fetching packages....
-
meson8b-dwmac does not works
-
on others images eth0 driver is stmmaceth.. and this driver works
-
just do not tell me everything is fine
-
I checked the settings eth0, DNS, uninstalled even the network-manager, interfaces, even saved the resolv.conf settings in the head file. and I definitely say meson-driver loses eth0 in Armbian odroid c2 and nanopi k2. etho works about 5-10 minutes. After ping yahoo.com name or service not known - ping 192.168.1.1 destination host unreachable. With all valid eth0 settings. In nano pi k2 I can switch to wlan0 in the odroid I need to reset
-
after all, you know that you do not have to. so I asked through curiosity
-
if absolutely wrong why do I have problem? System lost eth0 connection after 3-5 minutes? kernel 4.14 odroid c2 armbian 5.44 bionic.
I will try it fix tomorrow.... now i formatted micro-sd card
-
Why dont you provide support to the Banana pi single boards ? Many of them very interesting. Support is also very weak and short. I know that the last 2 boards from bananpi were based on mediatek and realtek CPU. ( R2 W2 ) They was specialized single boards as router and storage NAS board. why not to try?
-
I think this is the same situation as Nano pi k2. Kernel 4.14 does not working properly with amlogic S905 devices
The latest armbian for Nano pi k2 also lost eth0 connection after 10-15 minutes
NanoPi K2 General Topics
in Amlogic meson
Posted
kernel 4.16.14-meson64
maybe this board comes in two versions rev 1 or 2? I am also surprised by why eth0 turns off.