constantius
-
Posts
223 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by constantius
-
-
I have not received yet the board but i'm prepared for 1.8 GHZ.
-
I have installed Orangepi RK3399 Armbian 5.75 Bionic kernel 4.4.174 on Videostrong Mecoool RK3399. ( on eMMC )
I had to do only one thing. Disable DSI-1 monitor, because system regognized HDMI -1 and DSI-1.
xrandr --output DSI-1 --off. ( via armbian-config boot environments setup )
Hardinfo recognized Excavator Single Board Computer.
Meccool works pretty well.
-
hi
Does build / config / boards / pineh64.wip support pineH64 rev B? Will the system image work on model B?
-
1.8 GHZ works with Orange PI image Xenial Desktop - kernel 3.10.
These two fans are enough... Iam enable watch youtube 360pp.
-
Not boot at all on orangepi 3. I thought maybe i can login on putty but not.....
-
OK I have installed imageUbuntu 18.04 XFCE from Libre Computer www page and works without any issue.
-
kernel 4.20 is not supported?
On your www page board is marked as supported
This bug does not depend on kernel
best regards
Radek
-
Le Potato not boot properly.
I have wait for GUI 10-12 minutes. Problem exist since i have bought this board and for all Armbian's I was using
output from command line
-
La frite sbc is avalaible via preorder. This board dont have micro-sd slot. It is avalaible with eMMc module. Can we expect armbian for such sbc? Can i suggest it as support board?
-
Just for info from cnx-software.
Orangepi 3 H6 chip is launched!!!!
-
Hello
I searched the forum and there is a lot of sd card performance topics. Im using SanDisk microSDHC 16GB read 98mb/sek UHS I C10 which cost 7.43 USD. I have given up Samsung EVO cards. Sandisk is much better. I have found in promotion - costs only 4.12 USD, read 100MB/sek Toshiba M203 microSDHC 16GB UHS-I, clas 10. There is no information about I/O transfer. Which sd-micro card do you recommend ? I mean card costs max 10 USD or even cheaper.
-
How fresh.? I have downloaded armbian 5.67 kernel 4.19 from download page dated 07.12.19 build. I blocked upgrade kernel, did upgrade and reboot ( still quick boot, install DE, reboot - still quick reboot. And then installed libreoffice firefox thunderbird xfce4-goodies, hardinfo synaptic, caja mate-system-monitor engrampa and reboot AND FINALLY BOOT TOOK 8 minutes
I did it today 2 hours ego. I MEAN UBUNTU BIONIC IMAGE DEBIAN STRETCH WORKS !!
-
I thinks its depend on software i have installed. Fresh armbian 5.67 bionic kernel 4.19 installation boot quickly. Then i installed a lot of software which i normally used to. And now system boots slowly. I have now no idea which program did it. hm... i have to check it
-
"It would appear the "Linux hates HDMI--->DVI" situation is back. My typical testing monitor with DVI does not work at all and my proper hdmi one works perfectly."
It is not HDMI-DVI connection fault. HDMI also but long time. Now iam trying new kernel 4.19. 4.14 boot long. maybe this help something
-
ubuntu announced 10 years of support for version 18.04. This is due to the willingness to support devices and iot platforms. Is therefore armbian based on 18/04 will be supported for 10 years?
-
I have done it. System works. I tested it. Thank you very much for your reply Condoscope. I can confirm that Armbian 5.65 Bionic Desktop work on EMMC Firefly-rk3399.
Best regards
-
https://botland.com.pl/akcesoria-odroid/6537-konwerter-usb-audio-jack-karta-dzwiekowa-do-odroid.html
I have only one sound card. It works with other SBC i have.
Rock64 Ubuntu bionic kernel 4.4 does not recognize it.
-
Your build Armbian 5.65 kernel 4.4 and my build 5.65 the same kernel - system has sound only via HDMI monitor.
Is it possible to enabled audio via 3.5 jack or external USB sound card?
-
I downloaded armbian 5.65 bionic default desktop kernel 4.4.162 image and burned it on sd-micro-card. I was looking for instruction how to boot from sd card on firefly www.pages. And also on firefly forum. There is no information how to boot from sdcard. During the boot i pressed pwr button and also combination of reset and recovery button but device not boot. Do you have any knowledge how boot system from micro-sd card?
PS I have downloaded firefly image for booting from sd card . it works. Your image armbian 5.65 bionic does not boot at all. To boot from sd card you need press PWR Key button only. Did you checked your image that is bootable?
-
I have build Armbian 5.65 Bionic Kernel 4.14 and it works till first reboot. After reboot black screen.
Errata Desktop environment boot after 12-15 minutes
-
La Frite will be avalaible on november 2018. Now you can back it on kickstarter web page. specs.; https://libre.computer/products/boards/aml-s805x-ac/ This is my proposal to support.
Best regards
-
yes i can confirm that Armbian 5.59 based on Debian Stretch kernel 4.14 is running well.
on my la potato screen is black after reboot. System is booting but not to the desktop environment or even to the console. I installed lightdm but nothing help.
-
Hi
I have build Armbian Bionic 5.64 and 5.46 with XFCE desktop and system works only to the first reboot. After reboot i see only black screen. Kernels 4.18 and 4.16
-
"Don't have this board. Untested.
https://dl.armbian.com/firefly-rk3399/"
Are they images for EMMC or only micro-sd cards?
Orange Pi One Plus Desktop Enviroment
in Allwinner sunxi
Posted
Information for this person who builds nightly dev images. These images for orange one plus only work for the first reboot. After him, eth0 is not available. And you have to go through gymnastics when you restore them. It makes no sense to put them on the server at this initial stage. Desktop on 1GB RAM is pointless. For a version with 1GB of ram, can not you build a 32 bit image? best regards