lampra
Members-
Posts
169 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Everything posted by lampra
-
I did the same and everything works on my cubietruck. Your Armbianmonitor is incomplete, there is no info from the previous boot that you claim no sata, so I can't help anymore.
-
For anyone failing to build modules using the legacy bullseye image, I succeeded by creating a "source" link in the modules folder root@orangepizero2:/lib/modules/4.9.280-sun50iw9# ln -s /usr/src/linux-source-4.9.280-sun50iw9/ source root@orangepizero2:/lib/modules/4.9.280-sun50iw9# ll total 700 lrwxrwxrwx 1 root root 39 Aug 25 23:03 build -> /usr/src/linux-headers-4.9.280-sun50iw9 drwxr-xr-x 8 root root 4096 Sep 9 05:18 kernel -rw-r--r-- 1 root root 239753 Sep 9 05:19 modules.alias -rw-r--r-- 1 root root 245218 Sep 9 05:19 modules.alias.bin -rw-r--r-- 1 root root 27739 Aug 25 23:03 modules.builtin -rw-r--r-- 1 root root 12 Sep 9 05:19 modules.builtin.alias.bin -rw-r--r-- 1 root root 30895 Sep 9 05:19 modules.builtin.bin -rw-r--r-- 1 root root 24568 Sep 9 05:19 modules.dep -rw-r--r-- 1 root root 39138 Sep 9 05:19 modules.dep.bin -rw-r--r-- 1 root root 110 Sep 9 05:19 modules.devname -rw-r--r-- 1 root root 12338 Aug 25 23:03 modules.order -rw-r--r-- 1 root root 55 Sep 9 05:19 modules.softdep -rw-r--r-- 1 root root 28361 Sep 9 05:19 modules.symbols -rw-r--r-- 1 root root 34978 Sep 9 05:19 modules.symbols.bin lrwxrwxrwx 1 root root 39 Sep 9 05:18 source -> /usr/src/linux-source-4.9.280-sun50iw9/ drwxr-xr-x 3 root root 4096 Sep 9 05:19 updates
-
**Is this the correct location, or it should be at the other supported boards? It seems that DT overlays are not working root@orangepizero2:~# cat /boot/armbianEnv.txt verbosity=1 console=serial disp_mode=1080p60 fb0_width=1280 fb0_height=720 rootdev=UUID=b8899b39-b6cb-4718-bdbb-e1b39816db74 rootfstype=ext4 overlays=w1-gpio param_w1_pin=PC9 param_w1_pin_int_pullup=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u Boot log:
-
You could probably downgrade the kernel to a version lower than 5.10.60 using armbian-config and wait until 5.10.62 is available.
-
I doubt that this is the same case, but I had the same error on an orangepi pc so for future reference I comment here. I had upgraded to buster from strech but it seems that the command lsb_release did not work and probably armian.config could not choose the appropriate debian release. Then the list (/etc/apt/sources.list.d/armbian.list) contained no release info, and I was getting the same error. Just adding the release solved the issue. root@orangepipc:~# cat /etc/apt/sources.list.d/armbian.list #deb http://apt.armbian.com main -utils deb http://apt.armbian.com buster main buster-utils
-
Did you check for the patches? DO you build the kernel with them or not? If not, just copy the patches to the userpatches folder
-
https://github.com/armbian/build/tree/428a2087671d6dbc9befc5ffa88b57c2abbf5192/patch/kernel/archive/sunxi-5.13 Some weeks ago they were included by default, and then they were excluded, and I had to include them in the userpatches. Not sure where they reside at this moment.
-
This is what I did here ATFSOURCE='https://github.com/ARM-software/arm-trusted-firmware' ATFBRANCH='branch:master' edit: You also need all the patches (for h616 and opz2). I did not check if the patches are present or not in armbian master, as I had included them in previous builds. If not, you need to include them.
-
Just read the topic
-
Tested after changing ATF to mainline master, and it's loading the kernel. Ethernet and usb also working http://ix.io/3woR To me, it seems that we need to stick to 5.13 (which includes all the patches) for a while, as the discussion for the mainline support is far from concluded.
-
Then this should probably point to the mainline ATF source.
-
According to apritzel OPI zero2 has - unsupported Allwinner WiFi/BT chip The firmware of the wifi seems to be available here. The schematics of WiFi/BT are available here If I understand correctly, we need a pr for the firmware and a patch(overlay?) of the upcoming DT provided by apritzel. Is anyone skilled enough to write a patch for the DT?
-
As mentioned by @mantouboji 5.13 is working well for the moment with the relevant patches. Though we are missing, among others, overlays and wifi. Regarding overlays, I tried to compile w1-gpio-cl but I had issues with the headers on 5.13. Did anyone manage to compile anything with 5.13? Regarding wifi, as this is new AW hw, I expect that we need to port the driver from the ventor's legacy sdk. Is anyone familiar with the process?
-
I probably could, but I am not sure how to handle this without braking everything else. diff --git a/config/sources/families/include/sunxi64_common.inc b/config/sources/families/include/sunxi64_common.inc index bc59438..1082479 100644 --- a/config/sources/families/include/sunxi64_common.inc +++ b/config/sources/families/include/sunxi64_common.inc @@ -27,9 +27,9 @@ case $BRANCH in edge) - KERNELSOURCE="https://github.com/megous/linux" - KERNELBRANCH="branch:orange-pi-5.12" - KERNELPATCHDIR='sunxi-'$BRANCH + KERNELSOURCE="https://github.com/apritzel/linux/" + KERNELBRANCH="branch:h616-v8-rc" + KERNELPATCHDIR='sunxi-orange-pi-5.12' ;; esac diff --git a/config/sources/families/sun50iw6.conf b/config/sources/families/sun50iw6.conf index 0862996..0a04279 100644 --- a/config/sources/families/sun50iw6.conf +++ b/config/sources/families/sun50iw6.conf @@ -8,14 +8,17 @@ ASOUND_STATE='asound.state.sun50iw2-dev' if [[ $BOARD == orangepizero2 ]]; then - ATFSOURCE='https://github.com/apritzel/arm-trusted-firmware' - ATFBRANCH='branch:h616-beta' + ATFSOURCE='https://github.com/ARM-software/arm-trusted-firmware' + ATFBRANCH='branch:master' ATF_PLAT="sun50i_h616"; ATF_TARGET_MAP='PLAT=sun50i_h616 DEBUG=1 bl31;;build/sun50i_h616/debug/bl31.bin' - BOOTSOURCE='https://github.com/jernejsk/u-boot' - BOOTBRANCH='branch:h616-v2' + BOOTSOURCE='https://github.com/trini/u-boot' + BOOTBRANCH='branch:master' [[ -z $CPUMAX ]] && CPUMAX=1512000
-
Successfully built & booted kernel 5.13.rc1 using mainline ATF, mainline uboot and this kernel source. Ethernet & usb works, reboot does not. More tests in the next few days Armbianmonitor
-
Please accept my apologies if I should have posted this in a different place. So I have a working local build environment and I want to test the mainline ATF. Which is the correct way to change the source and the tree and define PLAT=sun50i_h616? When I change it at the families folder the and running ./compile.sh, I see the following in htop: ./compile.sh BOARD=orangepizero2 BRANCH=edge RELEASE=hirsute BUILD_MINIMAL=yes BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,gpg,img,imgATF_PLAT=sun50i_h6 and it keeps spiting this: Alternative can see an ATF folder in the userscripts folder /build/userpatches/atf/atf-sunxi64$ but I couldn't find any documentation how to use it. Thank you
-
I am wondering if with the newer 5.12 kernel we need mainline ATF here rather than the beta version in order to boot the kernel. Does anyone know?
-
As per the documentation I increased verbosity to 7 at armbianEnv.txt but no new output.
-
The test build (Hirsute 5.12.6 May 23 2021) gets stack at Starting kernel ...
-
It seems that there is some dev movement for H616 on kernel 5.12 and also a fresh wip branch with many goodies Anyone available for building a test image?
-
I tried to enable onwire both with stable, edge and factory images, but none worked using overlays. So it seems we are not there yet. [ 5.576315] sun50i-h616-pinctrl 300b000.pinctrl: pin PC9 already requested by onewire@0; cannot claim for 300b000.pinctrl:73 [ 5.587658] sun50i-h616-pinctrl 300b000.pinctrl: pin-73 (300b000.pinctrl:73) status -22 [ 5.595732] w1-gpio onewire@0: gpio_request (pin) failed For anyone who needs to work with onewire on this board until proper support enabled you could use w1-gpio-cl. Just download the headers and build it. Using onewire is then just as easy as: modprobe w1-gpio-cl m1="gdt:73" If @hexdump could provide headers for his kernel, then we could have the edge image with his kernel and support for usb, reboot and onewire until proper support is enabled. PS: Seems that ATF has moved to v4
-
I had a similar issue with similar output in dmesg on an H6 board Try param_w1_pin_int_pullup=1 In my case including a resistor solved the issue
-
I tried today the recommended and test(03042021) images. The kernel booted, but I could not pass the password change using UART at 115200 (cu, bootterm, minicom) nor I could connect from ssh using Ethernet cable. I will try with a new sd card next week.
-
Off-topic: Do we need to open a new thread (in general chit-chat maybe?) if we seek experiences from other forum members and not from the person who started the current thread?
-
I am using apt proxy on opi pc 20.11.1 buster. Te proxy was working fine but now it gives error for apt.armbian.com only, not for debian repos. Err:2 http://apt.armbian.com buster InRelease 500 INTERNAL SERVER ERROR [IP: 192.168.10.1 8080] Any hint? Edit: https works