RaptorSDS
-
Posts
295 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by RaptorSDS
-
-
vor 4 Stunden schrieb Benedito Portela:
sdcard boot
yes put armbian image like multiboot on a sdcard and than boot maybe you have to put another boot partionion on emmc but not more ,
you dont need to remove emmc for this
-
vor 5 Stunden schrieb k405:
Att, my board broken after trying to update, idk why but it crashes and system doenst start
i have installed the last trunk.Please read first page , its very very hard to brick the board normaly insert sd-card and flash another image and you good to go
please provide serial log if possible , else we cannot see where th problem occur
-
vor 11 Stunden schrieb Defalt36:
Can someone confirm me it's actually impossible to use the wifi with this chip? I tried and tried and couldn't get it to work.
There's one board with a chip called MSN8800D I would try to get wifi with it but multitool says the emmc storage was not found. Did the chip fry, even though it's a 8Gb/8GB one? If it fried the board shouldn't work at all because the ram would fry too, no? It's Samsung KMQ7X000SA-B315
Yes correct the SSV6252p is hard to get it run because no support ,
the MSN8800D i think was a old chip from i-phone or a clone from something , support looks bad ( only some one match with google ) but its have nothimng to do with emmc support , maybe this board has nand or eMCP memmory and than also emmc not found ( Nand only in legacy image support , eMCP only with correct led-config sometimes)
when you have exp in hot air soldering maybe swap the wifi this a best solution or use usb stick
-
vor 42 Minuten schrieb Chatuba:
'll try to install the boot in the sd after installing to flash, maybe that will do the trick.
EDIT- No luck, any attempt to use a desktop img doesn't boot, hdmi and usb don't work, just the power led.
do you boot the minimal version , did they run good ? please provide version of minimal . ( do you use lagecy version )
wich config did you use for rk322x-config --> same has to be config to run dekstop
-
on the same page like minimal also desktop variants
https://github.com/armbian/community/releases?page=2release 25.02 trunk 410 has ones
-
vor 3 Stunden schrieb Gustavo Rgs:
Have any build rk322x armbian server version, without desktop?
yes every build that was compile has a minimal version that is the server one , please search for that at this post or github
-
vor 7 Stunden schrieb Void Spirit:
downloaded from a link on this website
but that a good sign that the box get a ip address by dhcp , than its online , do you use the latest one from first page or my older ones from google drive ( 2023 and befor dont have ssh active)
there should be no diffirent mac and ip address because they use same hardware
-
vor 5 Stunden schrieb Void Spirit:
Android (7.1, 8.1, 10).
android 8.1 possible but 10 i thing its a fake 7.1 , Android mostly only poor patch together for exact one box i have many bad exp with port a android (also from same main cpu) to another box
all android and linux are config by dtb files , there are the information for kernel wich memory and voltage and many other stuff , ( this box have 3 diffirent memory system nand flash, emmc and eMCP flash) so a wrong dtb could be a non start box
also in last time many box have problems with hdmi port an start without display but its than maybe possible to start ssh from network lan port of this box
maybe also fake rk3228 cpu you tool also report a s905w chip , we have see sold as h6 ,print as amlogic at android and inside a motorola cpu
-
vor 11 Minuten schrieb Enzo Esteban:
i've explore all rk322x options but no sucesfull.
thats weird because ssv6051 is a know hardware for this box , when no led-config work than we need a dtb/dtbo of orginal android from this box
else, maybe you can try LibreElec and look if is found there than we have idee whats wrong --> or maybe a bad chip or fake chip
-
Dear Esteban
vor 4 Stunden schrieb Enzo Esteban:. But I was unsuccessful in enabling the Wi-Fi.
Did you try the LED-Config settings , like we multiple times tell that led-config also switch Wifi-enable pin to diffirent settings or ports ,
be aware that there are so many rk322x box and other box around , with so many cheap and creepy hardware also fake and misleading prints on chip and reycling hardware
-
vor 3 Minuten schrieb Obmor:
t I really want a WLAN.
do you try the diffirent LED-Config in rk322x-config tool ? there are also change WLAN enable pins maybe one work
-
vor 6 Stunden schrieb wanton beis:
there any guide to install armbian directly in the sd card without touching th
like multitool
burn it with image writer direkt the armbian.img to sd card and ok , after first boot it resize automatic to full card , like also multitool do
-
@Mr-TNTplease can you send some picture of board ,
there are 2 boards with problem first wherer the right LED-Config has to been set with ssh after flash per LAN , the secound has a close bootloader which need a diffirent OPTEE area wich need to be flash seperatly
overall normaly when sd-card boot work than later it should also boot from that , yyou can also flash armbian direct to sdcard and also try to boot from sdcard maybe as short term solution
-
vor 2 Stunden schrieb Kos Pag:
Wifi is not recognised rtl870+ is not usb
thank you for more info in orginal post , please tell us wich LED config do you use ( LED config also determing wich Enable Pins used example wifi enable) also trl870+ also not common one did other ubuntu or debian are support rtl870+
-
vor einer Stunde schrieb Parth:
i dont really do care about how much ram and rom i have got, the goal is to get the linux working on this processor.
understand
but fake and cheap is always a topic , we have story about fake the fake ,
cpu --> like sell as amlogic , report as rockchip , label as motorola and inside it was a rk3229
memory micron chp id that even micron dont know
wifi chips from iphone that was reused
maybe you flash a rk322x bootloader and its old rk30xx chip or newer rk33xx chip ( maybe thats why uboot from 2024
-
vor 52 Minuten schrieb Kos Pag:
Wifi is not recognised rtl870+
and now ?? read the glasball maybe some information would be nice also rtl870+ is usb ? because normaly this box has cheap old wlan modules
-
vor 3 Stunden schrieb Parth Yatin Temkar:
e 4GB version and got a RK3228A.
there is no 4GB version of rk3228 you mean 4giB or 1GB Ram
because of uboot from 2024 maybe still a closed bootloader , normally every bricked box still boot from usb or sdcard ( like on page one there is no real soft brick , only hard brick of memory chip fail)
-
vor 34 Minuten schrieb bellad:
aic8800
why this , i thing most of usb wifi adapter ( WIFI N or AC at 2.4GHZ ) are realtek 81xx or some RTK88xx , that are good support and already inside this armbian ,also some Broadcom USB things .
please be arware most of 5GHZ WIFI AC ( dual Mode) are not as good supported at linux
-
Am 10.7.2024 um 21:32 schrieb Emilio Peña:
Does anyone know how to have Armbian / Multitool for RK3228 / RK3228H or if it is compatible with any jock tutorial?
normally all are compatible but there are no 3228H , there is 3328A and 3228B and 3229 (all same )
but like we say always there are so many creepy box outside with so many variant hardware and HW quality there are always some issue . you can follow the tutorials
-
vor 1 Minute schrieb Leo Luiz:
'm using balenaEtcher to burn the multitool image into a flash drive, but it ends with a partition of about 396MB.
The linux image is about ~900MB uncompressedtwo methods ,
1. boot image first than automatic resize to bigger size ( most of the drive) , than put your image on card
2. use the compressed image of armbian on the sd card , the multotool also can use zip and tar and tar.xz and tar.gz
-
vor 5 Minuten schrieb Blyato:
By the way, is there a way of making it boot from SD card? Armbian takes a long time to boot from the eemc it seems.
wirte the armbian image to SD Card and than insert and start , than it should boot from SD card like the multitool
i had nowadays 4 of this box, one old AMlogic s802 ( over 5 years in use with armbian scan and printserver) ) 1 xrk322x that work out of the box with armbian , one rk322x with resolder wifi from wired china chip to rtl8723ds , and now a rk3328 with android ( sadly sd card is on wrong sdio port)
-
BCM433x are normally good supported , do have rk322x-config and setup the right led config its help also with wifi enable signal
-
vor 5 Stunden schrieb Socram:
The machine has 2GB of RAM and 16GB of FLASH
this looking not as rk322x , i thing thats another main chip like rk328x or newer , we see some box that boot multitool without rk322x
-
vor 5 Stunden schrieb suser:
Now Armbian boot from uSD, but no WiFi,
Please can you be more clear did armbian boot befor without hdmi but with wifi ?
or only android had wifi ?
did you have a bootlog or dmesg with
dmesg | grep 8723or
dmesg | sdio ; maybe dmesg | grep - i 8723
if this is positiv than only a driver issue , else also DTS/DTB maybe dont activate the wifi sdio
CSC Armbian for RK322x TV box boards
in Rockchip CPU Boxes
Posted
you have to log at the bord direct for the pins or soldering point , than solder wire and connect to uart usb adapter , than you can get a log,
you say yyou can boot from emmc but its not stable ? or complete dead emmc
this are cheap box , there is not many to speed up
maybe use one box for one task is the goal than