RaptorSDS

mostly 4 chips with same id or the one on both sides of main board

rk3228 if unclear stay at A and be safe RAM if default is stable just use this ( in you case i think slower is better than unstable) wifi 3030:3030 i found many evidence that this is a 6051p for Ram and wifi you could always use your picture or look in the tv-box and google the modules rk33xxx page on from china but clear some SDIO ID

when i look at the log i think you have more a major (or bigger) Problem , the log show a bad emmc memory , the bootloader can not read some parts correctly (ecc-error) because you have had also a bad android i thing there was the problem that the emmc sometimes didnt not shutdown correct or get to much Voltage or something like that the picture show a kernel panic , that could alse be the bad memory or some other driver that did not follow the kernel instructions @jock i dont know if a dtb extract from android could help here ?

NAND only with ARMBIAN with Kernel 4.4 =legacy please try first some setting from rk322x-config , from SD-Card till you found stable ones

easy boy , you have now 3 topic or not does it boot or not ? UART Log is everytime welcome , but when UART work its boot and running (or at least the bootloader ) yes log show maybe 500mhz but i thing that simply the easy fallback to be compatible to all box and not your box -> do you get Armbian on SD-Card boot ? than you can try all settings till stable one is found

yes start mutlitool and erase nand

i know 3 ways first sometimes 7zip can read img and iso secound tools like ext4win or somthing but than the img / iso has to be mound as CD-ROM or with windows tools as HDD like a wim or vhd third use of Windows Subsystem for Linux , install Debian or Ubuntu and use linux with all its tools

@jock @ilmich from search of S9082H , i found this https://4pda-to.translate.goog/forum/index.php?showtopic=936891&st=16400&_x_tr_sl=auto&_x_tr_tl=en&_x_tr_hl=de&_x_tr_pto=wapp thats AMLogic box but also HDMI output problems, there is the problem that box max is 1080p and that EDID is higher example 4K and now bootloader dont know what to do with this Resolution maybe also a topic at our HDMI issue

https://forum.armbian.com/topic/12656-csc-armbian-for-rk322x-tv-boxes/page/58/#comment-158957 https://forum.armbian.com/topic/12656-csc-armbian-for-rk322x-tv-boxes/page/57/#comment-156548 there is a S9082C from SCL , its a clone of some wifi rtl chips , its closse source , no linux support its looks your is the next one S9082H from another SCL copy distributor

its a Broadcom BCM4334 , should be support by linux with standart brcm80211 driver package that its part of kernel >3.13, 4.xx , 5.xx and 6.xx https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 HDMI i thing ILMICH and other are good support

like i sad befor led are a old word it change some more jock explain : https://forum.armbian.com/topic/12656-csc-armbian-for-rk322x-tv-boxes/?do=findComment&comment=163046 what do you mean recognize wifi ? complete empty SDIO device or a wifi with unknow id like 024c:D724 ( RTL8723DS , because i solder it myself and no one else has this chip inside a rk322x box, so its not recognice automaticly ) Is wifi another problem ? i thing that HDMI was your problem ?

but in backround also many other parameter change not only the LED (led-config is a old name because before it only change some led things , but nowaday many more are change like eth speed , wlan enable pin etc) GPIO is more a generale name for some Outputs of the tv box , there a still many thing thats parmater by gpio like wlan on/off or correct eth speed example ( port AO pin 1and 2 ) are gpio and can configure to be i2a for SPDIF , also AO 2 has be configure as Clock and with a parameter of speed , also some Ports need a specific voltage i saw in your log and maybe some missconfigure of GPIOS maybe some LED-Config could help

eMCP some parts are not complete support at the moment --> eMCP is a more newer thing maybe actual kernel 6.10 running better ( eMCP is eMMC+DDR Ram ) the UART log is maybe better but DMESG is still ok , i see some clock and voltage not correct--> some gpio not registred do you try other setting with rk322x-config? --> led-config this also thange some GPIO setting for diffirent boards?

ok soory was irretated by usb init direct befor rknand init than we can try "jumpstart" and hope that we can start than armbian for SD-card , else we can try the more complex like write new bootloader but than someone else has to help ( i hadnt any box with need of rktool)

you have the USB Stick still insert thats a problem (like with sd-card only) it will interrupt bootloader what about 4.4 on nand and no SD-card and no USB stick ?

ok and what say the UART log ? , what is with "jumpstart" as alternativ

compress image are allowed , do you have put the files into the folder ? else try uncompress image files like jock said we use the USB-Stick as step in the middle to boot SD_CARD

it good to hear that multitool now work , the backup will be in the same folder of usb-stick with multitool that are boot or SD-Card , the warning the a hint that the bootloader maybe not open ( like we saw already) i thing we should try after backup the option legacy image and look if armbian is working , else we use "jumpstart" and flash armbian on SD-Card

no low level format need , only a normal SD-card and usb stick ( both with normal MBR boot sector ) if image is bigger than folder, than we need first a full boot of Multitool. it will resize its own partion than we add the image file . its recognize the usb stick so sd-card should stop the nand bootloader --> than boot the usb stick --> than we can install jumpstart or flash armbian to nand

its good to see that it found the USB drive !

please no , only flash multitool and put the compress image (like its from armbian server tar.gz or something ) inside the folder on the multitool folder not a new partion !

yes correct normaly the first part bootstrap isnt show by windows , the multitool partion will extendet with first boot , but you can put the compress image files on the 377 MB multitool partion

I have good experience with Etcher and win32 disk imager . But during the Windows June update some things went wrong in windows , etcher terminated many SD-card with errors and all drives that had bootsectoren were kept by windows as ghost drives (light gray) although they were no longer there . after Juli Update all is good again . please try first to flash a USB stick with Multitool. After that please delete the SD-Card, rewrite the MBR (Minitool Partionion Wizard can rebuild MBR) and then write a drive with FAT32. then try again wit win32 disk imager or etcher maybe your sd-card diying slowly try else another sd-card

I had to ask my wife if I should answer in sarcastic, honest and friendly or funny , she said be friendly , but I can not resist a little joke to start the day . /joke on , Yes when you wait 28h 73m and 98s you will have a box that do all automatic and have the power of a i9 13990KH /joke off friendly: you know what you are doing here, that will still be at 11% because that is the part of text that is display, and this page it like every other software the licenses page. you know that you are in a DOS box like Linux console, you have to use keyboard like in good old times and scroll down with arrow keys and hit TAB to witch cursor location and hit SPACE or ENTER If the keyboard does not work, please try another one and leave it plugged in right from the start of the box (there are still keyboards that do not work well under linux even though there is a basic driver for generic keyboards). I don't know if flashing TV boxes is for you if you already have problems with a license text, I understand that you have already flashed the SD card correctly, but this is not windows 11 which automates everything and gets you through the setup agent with mouse and keyboard. Please have in mind following : We think that people should understand that this is all at their own risk and that they need to understand something about what they are about to do like uart adapter or working with ssh or console.

thats now a part for @jock