gounthar

Thanks! 🙏

Thanks! May I ask you what kind of NVMe drive you have installed?

Hello there, 👋 I've connected an NVMe drive that I used in my PC to the Banana Pi F3, but it's not being detected. I'm using a USB-C PD power supply (Pine64 PinePower Desktop) to ensure sufficient power, yet it's still not recognized. The drive might be faulty. Has anyone successfully used an NVMe drive with this board? If so, could you share which NVMe drives are known to work with it? Thanks! _ _ _ /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v25.5.1 for BananaPi BPI-F3 running Armbian Linux 6.6.87-current-spacemit Packages: Debian rolling (trixie) IPv4: (LAN) 192.168.1.185, 192.168.1.83 (WAN) 82.65.177.146 IPv6: 2a01:e0a:5ed:6230:fcfe:feff:fef8:f4be, 2a01:e0a:5ed:6230:3718:a97e:8a7b:a2c6 (WAN) 2a01:e0a:5ed:6230:9f8a:b5c1:f849:3f6f Performance: Load: 2% Up time: 1:31 Memory usage: 2% of 15.51G CPU temp: 45°C Usage of /: 12% of 113G Commands: Configuration : armbian-config Monitoring : htop [...] # Check PCIe-related kernel messages sudo dmesg | grep -E "(pcie|nvme|k1x-dwc)" # Check PCIe power management cat /sys/module/nvme_core/parameters/default_ps_max_latency_us # Monitor PCIe during boot sudo journalctl -b | grep -i pcie [ 0.404937] k1x-dwc-pcie ca400000.pcie: has no power on gpio. [ 0.407218] k1x-dwc-pcie ca400000.pcie: host bridge /soc/pcie@ca400000 ranges: [ 0.407260] k1x-dwc-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x009f002000 [ 0.407280] k1x-dwc-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000 [ 0.507413] k1x-dwc-pcie ca400000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G [ 1.507664] k1x-dwc-pcie ca400000.pcie: Phy link never came up [ 1.508176] k1x-dwc-pcie ca400000.pcie: PCI host bridge to bus 0001:00 [ 1.514835] pcieport 0001:00:00.0: PME: Signaling with IRQ 65 [ 1.515235] pcieport 0001:00:00.0: AER: enabled with IRQ 65 [ 1.515884] k1x-dwc-pcie ca800000.pcie: has no power on gpio. [ 1.518096] k1x-dwc-pcie ca800000.pcie: host bridge /soc/pcie@ca800000 ranges: [ 1.518126] k1x-dwc-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x00b7002000 [ 1.518150] k1x-dwc-pcie ca800000.pcie: MEM 0x00a0000000..0x00afffffff -> 0x00a0000000 [ 1.518164] k1x-dwc-pcie ca800000.pcie: MEM 0x00b0000000..0x00b6ffffff -> 0x00b0000000 [ 1.618263] k1x-dwc-pcie ca800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G [ 2.618384] k1x-dwc-pcie ca800000.pcie: Phy link never came up [ 2.618513] k1x-dwc-pcie ca800000.pcie: PCI host bridge to bus 0002:00 [ 2.625055] pcieport 0002:00:00.0: PME: Signaling with IRQ 69 [ 2.625444] pcieport 0002:00:00.0: AER: enabled with IRQ 69 [ 8.000939] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... [ 8.348576] systemd[1]: modprobe@nvme_fabrics.service: Deactivated successfully. [ 8.349624] systemd[1]: Finished modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics. [ 9.227876] systemd[1]: nvmefc-boot-connections.service - Auto-connect to subsystems on FC-NVME devices found during boot was skipped because of an unmet condition check (ConditionPathExists=/sys/class/fc/fc_udev_device/nvme_discovery). 100000 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: has no power on gpio. juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: host bridge /soc/pcie@ca400000 ranges: juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x009f002000 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: Phy link never came up juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca400000.pcie: PCI host bridge to bus 0001:00 juil. 04 19:00:44 bananapif3 kernel: pcieport 0001:00:00.0: PME: Signaling with IRQ 65 juil. 04 19:00:44 bananapif3 kernel: pcieport 0001:00:00.0: AER: enabled with IRQ 65 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: has no power on gpio. juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: host bridge /soc/pcie@ca800000 ranges: juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x00b7002000 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: MEM 0x00a0000000..0x00afffffff -> 0x00a0000000 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: MEM 0x00b0000000..0x00b6ffffff -> 0x00b0000000 juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: Phy link never came up juil. 04 19:00:44 bananapif3 kernel: k1x-dwc-pcie ca800000.pcie: PCI host bridge to bus 0002:00 juil. 04 19:00:44 bananapif3 kernel: pcieport 0002:00:00.0: PME: Signaling with IRQ 69 juil. 04 19:00:44 bananapif3 kernel: pcieport 0002:00:00.0: AER: enabled with IRQ 69 poddingue@bananapif3 ~ $ # Enable all available kernel modules for NVMe sudo modprobe nvme sudo modprobe nvme-core sudo modprobe nvme-pci # Check if modules loaded lsmod | grep nvme modprobe: FATAL: Module nvme-pci not found in directory /lib/modules/6.6.87-current-spacemit nvme_fabrics 118784 0

Thanks a lot for your help, Igor. That did not make the trick, as the available packages are still in the old form (docker.io instead of docker-ce for example. Nonetheless, I now have a working (but old) docker binary, which is enough for my use case. Now, I will try to build a more recent docker binary. The next problem to solve will be to get the NVMe to work. I'm sorry your F3 died.

I tried to install docker via armbian-config --CON02 on Trixie but I got quite a lot of errors during the installation. Here is the board information if it ever can help: https://paste.armbian.com/xozimixeqi . Thanks.

Thank you so much. 🤗 Let's buy the board, then.

Hello there, I recently gained remote access to a Banana Pi F3 to test it, and everything went smoothly. The board was running Bianbu Linux, and I was able to install and use Docker without issues. Now, I'm considering purchasing the board and was wondering if the Armbian image would also support running Docker. Do you have any insights on this? Thanks!

Time to find my UART2USB adapters I guess. 😁 I tried the linked images in the downloads section, and not much happens.🤔

If I were to try a SoQuartz blade/Quartz64 these days, where could I find a recent image? I haven't been able to find any in the download page. Or should I use another image that would work for this model? Thanks.

Thanks.

I'm happy to see the support for this board is progressing. 🤗 @tiziano000, where did you find an adapter to connect to the GPIO pins? I have an SPI screen that I can't connect for the time being because of the strange (to me) spacing of the GPIO pins. 🤷‍♂️

Hello there, I'm trying to get an i2c ssd1306 screen to work with my Radxa Zero, without much luck for the time being. https://paste.armbian.com/cirulemeho I found two i2c devices, 3 and 5. sudo i2cdetect -y -r 3 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- sudo i2cdetect -y -r 5 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: 30 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- I think the 5 is for HDMI, right? Would the UU for the 3 mean my screen is not correctly connected or detected? Thanks.

I also have a cgroup problem, on a more recent version: lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Armbian 23.11.2 bookworm Release: 12 Codename: bookworm uname -a Linux k3s-control-plane 6.1.68-current-bcm2711 #1 SMP PREEMPT Sun Dec 17 11:40:38 UTC 2023 aarch64 GNU/Linux déc. 29 21:30:12 k3s-control-plane k3s[3689]: I1229 21:30:12.173705 3689 server.go:156] Version: v1.28.4+k3s2 déc. 29 21:30:12 k3s-control-plane k3s[3689]: I1229 21:30:12.174299 3689 server.go:158] "Golang settings" GOGC="" GOMAXPROCS="" GOTRACEBACK="" déc. 29 21:30:12 k3s-control-plane k3s[3689]: time="2023-12-29T21:30:12+01:00" level=info msg="To join server node to cluster: k3s server -s https://192.168.1.138:6443 -t ${SERVER_NO> déc. 29 21:30:12 k3s-control-plane k3s[3689]: time="2023-12-29T21:30:12+01:00" level=info msg="Agent node token is available at /var/lib/rancher/k3s/server/agent-token" déc. 29 21:30:12 k3s-control-plane k3s[3689]: time="2023-12-29T21:30:12+01:00" level=info msg="To join agent node to cluster: k3s agent -s https://192.168.1.138:6443 -t ${AGENT_NODE_> déc. 29 21:30:12 k3s-control-plane k3s[3689]: time="2023-12-29T21:30:12+01:00" level=info msg="Wrote kubeconfig /etc/rancher/k3s/k3s.yaml" déc. 29 21:30:12 k3s-control-plane k3s[3689]: time="2023-12-29T21:30:12+01:00" level=info msg="Run: k3s kubectl" déc. 29 21:30:12 k3s-control-plane k3s[3689]: time="2023-12-29T21:30:12+01:00" level=fatal msg="failed to find memory cgroup (v2)" déc. 29 21:30:12 k3s-control-plane systemd[1]: k3s.service: Main process exited, code=exited, status=1/FAILURE I have modified the /boot/firmware/config.txt and rebooted, but it was not enough... cat /boot/firmware/config.txt # For more options and information see # http://rptl.io/configtxt # Some settings may impact device functionality. See link above for details # For k3s (see https://github.com/k3s-io/k3s/issues/970#issuecomment-548409262) cgroup_memory=1 cgroup_enable=memory

Hi there, Has anyone tried openRGB with armbian? I found a few references to Raspberry Pi and openRGB, but nothing really usable. I would like to build a Kubernetes cluster and use an RGB fan to display the status of the cluster (and of course try to cool it down). Thanks.

Where did you find the image? Thanks.

Apparently, Paris, France.

Good to know, thank you, I'll try that.

Thank you @balbes150. I guess there is no other alternative to the existing image? I have to rewrite everything with the new image, I can't update the board with the latest kernel because it's not official yet.?

I have the same kind of problem, trying to build a rtl8821CU module for the Rock5B. I have installed the whole firmware package through armbian-config . Then: sudo apt update sudo apt upgrade sudo apt install build-essential dkms sudo apt install git git clone https://github.com/whitebatman2/rtl8821CU.git cd rtl8821CU sudo make make ARCH=aarch64 CROSS_COMPILE= -C /lib/modules/6.2.0-rc1-station-m6/build M=/home/poddingue/rtl8821CU modules make[1]: Entering directory '/usr/lib/modules/6.2.0-rc1-station-m6/build' make[1]: *** No rule to make target 'modules'. Stop. make[1]: Leaving directory '/usr/lib/modules/6.2.0-rc1-station-m6/build' make: *** [Makefile:1923: modules] Error 2 but it fails... `uname -r` gives me `6.2.0-rc1-station-m6`. ll /lib/modules/6.2.0-rc1-station-m6/ total 1392 drwxr-xr-x 11 root root 4096 Mar 20 15:19 kernel -rw-r--r-- 1 root root 320711 Mar 17 14:22 modules.alias -rw-r--r-- 1 root root 327286 Mar 17 14:22 modules.alias.bin -rw-r--r-- 1 root root 16981 Mar 17 14:22 modules.builtin -rw-r--r-- 1 root root 37042 Mar 17 14:22 modules.builtin.alias.bin -rw-r--r-- 1 root root 18873 Mar 17 14:22 modules.builtin.bin -rw-r--r-- 1 root root 117401 Mar 17 14:22 modules.builtin.modinfo -rw-r--r-- 1 root root 79754 Mar 17 14:22 modules.dep -rw-r--r-- 1 root root 123183 Mar 17 14:22 modules.dep.bin -rw-r--r-- 1 root root 243 Mar 17 14:22 modules.devname -rw-r--r-- 1 root root 38207 Mar 17 14:22 modules.order -rw-r--r-- 1 root root 703 Mar 17 14:22 modules.softdep -rw-r--r-- 1 root root 136364 Mar 17 14:22 modules.symbols -rw-r--r-- 1 root root 170537 Mar 17 14:22 modules.symbols.bin

Thank you, I should try that.

Hi there 👋 I've tried the CSC edge images Armbian_23.02.0-trunk_Nanopiduo2_lunar_edge_6.1.8.img and Armbian_23.02.0-trunk_Nanopiduo2_sid_edge_6.1.8.img and the machine does not want to boot. Is there a more stable image somewhere? FriendlyCore boots on this board. Thanks. U-Boot SPL 2022.07-armbian (Jan 30 2023 - 06:49:28 +0000) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Jan 30 2023 - 06:49:28 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB Core: 60 devices, 17 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial Out: serial Err: serial Net: phy interface1 eth0: ethernet@1c30000 starting USB... Bus usb@1c1a000: USB EHCI 1.00 Bus usb@1c1a400: USB OHCI 1.0 Bus usb@1c1d000: USB EHCI 1.00 Bus usb@1c1d400: USB OHCI 1.0 scanning bus usb@1c1a000 for devices... 1 USB Device(s) found scanning bus usb@1c1a400 for devices... 1 USB Device(s) found scanning bus usb@1c1d000 for devices... 1 USB Device(s) found scanning bus usb@1c1d400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 4077 bytes read in 2 ms (1.9 MiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 234 bytes read in 2 ms (114.3 KiB/s) 18804544 bytes read in 780 ms (23 MiB/s) 8706400 bytes read in 363 ms (22.9 MiB/s) Found mainline kernel configuration Failed to load '/boot/dtb/allwinner/sun8i-h3-nanopi-duo2.dtb' libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 504 bytes read in 8 ms (61.5 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost0.dtbo No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 504 bytes read in 8 ms (61.5 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 504 bytes read in 8 ms (61.5 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! Error applying DT overlays, restoring original DT Failed to load '/boot/dtb/allwinner/sun8i-h3-nanopi-duo2.dtb' Kernel image @ 0x42000000 [ 0x000000 - 0x84d960 ] ## Loading init Ramdisk from Legacy Image at 43400000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 18804480 Bytes = 17.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree SCRIPT FAILED: continuing... No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image Device 0: unknown device sun8i_emac_eth_start: Timeout missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-02-81-e1-0b-9c-e0 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/00000000 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/0000000 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/000000 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/00000 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/0000 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/000 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/00 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/0 sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/default-arm-sunxi sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/default-arm sun8i_emac_eth_start: Timeout Retrieving file: pxelinux.cfg/default sun8i_emac_eth_start: Timeout Config file not found sun8i_emac_eth_start: Timeout sun8i_emac_eth_start: Timeout