Search the Community
Showing results for tags 'orangepipcplus'.
-
i have connected device with hdmi and i dont want logs to be shown on startup i tested adding this code in /boot/armbianEnv.txt but it doesnt work extraargs="console=tty3 silent quiet splash loglevel=0 logo.nologo vt.global_cursor_default=0 plymouth.ignore-serial-consoles consoleblank=0"
-
Hello, fresh installed Armbian desktop OS detects attached HDMI display as full HD with correct resolution 1920x1080. But after some restarts it loads in u-boot with correct resolution and then, on kernel startup switches to 1024x768 and also desktop opens with this resolution without an option to increase it. The armbianEnv.txt file in /boot folder contains string disp_mode=1920x1080p60 and was not changed. Please advise. -
Hello, just discovered ability to support legacy USB gadgets. There is UDC called max3420_udc and also gadgetfs module. By using startup script mkdir /dev/gadget modprobe max3420_udc modprobe gadgetfs mount -t gadgetfs none /dev/gadget it appears to be possible to use old gadget developed for kernel 3.4. It was descibed once in the link https://forum.armbian.com/index.php/topic/1759-usb-gadget-built-for-h3-processor-on-top-of-gadgetfs/ just line else if (stat(DEVNAME = "sunxi_usb_udc", &statb) == 0) { should be replaced by line else if (stat(DEVNAME = "musb-hdrc", &statb) == 0) { Hope this helps. Just curious, where would it be possible to find any information (in Armbian documentation) about that?
-
Dear guys, Recently i am trying to install Armbian on orange pi pc plus using Mobaxterm but for some reason after finishing the installation it shows only Armbian-config screen but not the GUI interface. I don't know if I installed it right or wrong. Hope everyone can help me because this is a subject project of mine in university. Thanks so much.
-
fb_st7789v spi driver not getting on orangepi pc plus in 5.15 kernel in following issue SPI driver fb_st7789v has no spi_device_id for sitronix,st7789v -
Hi all. I installed the latest Armbian on a OPI PC Plus that I have. I want remote desktop and console Desktop. As soon as I install tightvnc the console desktop wont login anymore. I get a pasword box and as soon as I enter it the screen will go black and then reset back to the login box. How do I set it up so I can have remote desktop and console desktop. I tried to install remote desktop for Windows RDP also and that also does not work.
-
Hi, I have a script in systemd which doesn't start automatically at boot using Orange PI PC+ under Armbian 22.02.01 Focal. I can see the script is read in the boot text. But my program doesn't run. [OK] Started WiProbe Gateway. It seems the that the script is executed, but stops somewhere in the script??? The program is in /root/Gateway/Bundle SCRIPT Gateway.service [Unit] Description=WiProbe Gateway After=netwok.target StartLimitIntervalSec=0 [Service] Type=simple WorkingDirectory=/root/Gateway/Bundle Restart=always RestartSec=1 User=root ExecStart=/root/Gateway/Gateway ExecReload=/root/Gateway/Gateway StandardOutput=/dev/null StandardError=/dev/null [Install] WantedBy=multi-user.target What am I missing here? Thanks, Frank
-
Hi I'm trying to cancel echo for orange pi pc plus any idea? Methods I've tried and failed so far https://github.com/voice-engine/ec Bu yöntem de doğru hardware bilgilerini bulmadım http://alsa-project.org/db/?f=d75c947d6147c6c00b31ba67bd1a6d62c010cfad
-
ix.io/48Zd I've simply installed Armbian 22.05 Jammy Kernel 5.15.y, Size: 307Mb, Updated: Jul 2, 2022 on my aforementioned subject title / tagged OrangePiPCPlus. I can't seem to get hassio to install with armbian-config and then with Software > Softy it doesn't seem like the image for homeassistant io gets pulled, because when I check with docker images list or docker ps I don't get anything returned. Plus the checkbox isn't checked in Soft for hassio when I go back. What could I be doing wrong here? I did install Docker first, anyone have any tips?
-
is there a chance that I could find older version of armbian for my sbc (orange pi pc plus)? in this case I need armbian buster for my sbc
-
Good day, for my Orangepi PC+ I installed Armbian Ubuntu Jammy on a µSD card. Up until Armbian Ubuntu Strech I was able to use a PCM510A for sound output. The settings for this were easy. With all updated OS after Strech, I can't install the PCM. Unfortunately, the help that was published in the forum wasn't helpful or I couldn't take it over. On the eMMC I have installed Armbian5.59 Orangepipcplus Ubuntu xenial default 3.4.113 desktop. Because of the advanced age of this OS, there are no updates and upgrades. Luckily my internet radio still works. Can someone explain to me how I can install the PCM510A at Jammy? Kind regards hajupiko49
-
Hi. I'm trying to use GPIO's of OrangePi PC+ and after install WiringOP, when I run the gpio readall, all my GPIO's Mode are showing OFF. I tryed enable in armbian-config, but I have only pps-gpio and w1-gpio, I tryed enable both but doesn't work too. Someone knows some solution? Thanks.
-
As you known OrangePi PC PLUS with armbian (e.g. Armbian 22.05 Jammy) can't be fully off. (But Xunlong's Ubuntu 16 can be off ok) I suggest change status of board from green "Supported" to yellow "SUITABLE FOR TESTING (WIP)". -
how can i know the name given to the usb port when i connect my arduino to my orange pi pc plus??? I need to be able to connect it but node red does not read it, please help
-
Hello, I am looking for the old version of Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113 Have checked the archive server here: https://imola.armbian.com/archive/orangepipcplus/archive/ but no luck There are old link found https://dl.armbian.com/orangepipcplus/archive/Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113.7z but has been "404 Not Found" Hope that someone still archived this version, please upload to a cloud server i just want to download it for my project Thanks in advance
-
Hi, I've decided to make a fresh install on a bigger SD card using Armbian 22.05 Bullseye on my Opi PC+. The aplay command doesn't output any sound, and alsamixer show the card is H3 codec. I don't know if the sound is output to the HDMI port or any other problem. Anyone could help ? Than you -
Armbianmonitor: http://ix.io/3UHS Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: Quote libv4l2: error turning on stream: Cannot allocate memory motion throws: Quote [1:ml1] [ERR] [VID] v4l2_set_mmap: Error starting stream. VIDIOC_STREAMON: Cannot allocate memory I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16? Today checked kernel 5.15.43-sunxi and 5.17.11-sunxi - same issue baal@3dprinter:~$ mjpg_streamer -i "input_uvc.so -f 5 -d $(ls -1 /dev/video[1-9] | head -1) -r SVGA -n" -o output_http.so MJPG Streamer Version: git rev: 310b29f4a94c46652b20c4b7b6e5cf24e532af39 i: Using V4L2 device.: /dev/video1 i: Desired Resolution: 800 x 600 i: Frames Per Second.: 5 i: Format............: JPEG i: TV-Norm...........: DEFAULT i: FPS coerced ......: from 5 to 30 o: www-folder-path......: disabled o: HTTP TCP port........: 8080 o: HTTP Listen Address..: (null) o: username:password....: disabled o: commands.............: enabled libv4l2: error turning on stream: Cannot allocate memory Unable to start capture: Cannot allocate memory i: Can't enable video in first time i: cleaning up resources allocated by input thread ^Csetting signal to stop force cancellation of threads and cleanup resources o: cleaning up resources allocated by server thread #00
-
Hello, my orange pi device crashes to white screen at random times. And in this case USB, ethernet does not work.Which logs should I look at?
.thumb.jpeg.b41a735a8006bfae0d6a6e369b019082.jpeg)
-
Hi! just want to share the experience. I'm using Armbian in an environment that cannot access the internet. So, NTP becomes a big issue, and I have to setup my local NTP server using Chrony. Things should be simple, but it just didn't work out. I stuck with this problem for a few weeks until I realized I'm trying to setup Chrony NTP server on a virtual machine. Then, I found this one on stackoverflow. https://serverfault.com/questions/1062023/the-least-bad-settings-for-chrony-as-the-ntp-server-on-a-virtual-machine It suggests how to setup NTP server on virtual machine, but I didn't follow through as I solved my problem by setting up Chrony NTP server on a physical server instead. So, just want to share the experience in case anyone stuck with similar problems as mine.
-
Hello, I'm using armbian on Orangepi PC PLUS and i'm controlling GPIO pins with Python. Everything is working fine when I start my Python script. Problem is during boot with GPIO3, because it's by default on pull up, and that is making me problem on device which is connected to that pin. Can I change that pin to be default OUT and pull down? When my python scripts starts, it will change GPIO3 to OUT and set it to 0, but I have only problem during boot.
-
i want to boot from sdcard and auto detect if boot from sdcard auto exec nand-sata-install with options and output progress to screen
-
latest version build orange-pi-pc-plus with some ld error: ./compile.sh docker /root/armbian/cache/toolchain/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld: fs/sync.o:(___ksymtab_gpl+__sync_filesystem+0x0): undefined reference to `__sync_filesystem' make: *** [Makefile:1185: vmlinux] Error 1 Displaying message: Compiling current kernel 5.15.37 info Displaying message: Compiler version arm-linux-gnueabihf-gcc 8.3.0 info Displaying message: Using kernel config provided by user userpatches/linux-sunxi-current.config info Displaying message: Compressing sources for the linux-source package Displaying message: Make the linux-source package 31 sec. info Displaying message: ERROR in function compile_kernel main.sh:589 -> main.sh:490 -> compilation.sh:506 -> general.sh:0 err Displaying message: Kernel was not built @host err Displaying message: Process terminated info
-
Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: motion throws: I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16?
-
I use Orange Pi PC+ with installed Armbian 21.08.3 on eMMC. On system i can't access to mmcblk0 device. In dev directory exist only mmcblk2* files related to eMMC. How can I enable access to the SD card ?
-
I have tried the image for Buster from the Download page for OrangePi PC Plus, and also built new images from current Git repo. In all cases the device bootloops when it tries to start the kernel. The image from the OrangePi website works ok. This looks like a similar issue as experienced recently with CubieTruck and BananaPi A20 boards (https://armbian.atlassian.net/browse/AR-749) which was fixed with a workaround (https://github.com/armbian/build/pull/2963) Is it possibly the same / similar underlying problem?
.jpeg.903e0ded0cf9232e9f25b30755051732.jpeg)
