w20359 0 Posted August 26, 2019 Share Posted August 26, 2019 Hi, I've got an Orange Pi Zero Plus H5 running "Armbian_5.91_Orangepizeroplus_Debian_buster_next_4.19.59.img" but I can't seem to connect to it via the three UART pins next to the Ethernet port. I'm using this adapter using both the Windows supplied and the manifacturer's drivers. I've also tried adding "uart1 uart2 uart3" to the overlays line in /boot/armbianEnv.txt and rebooting but with no luck. I'm using PuTTY on my laptop connecting via COM7 serial port (as shown in Device Manager) with baud rate 115200, but the PuTTY screen stays black with nothing coming in. Is there something that I'm missing? 0 Quote Link to post Share on other sites
martinayotte 667 Posted August 27, 2019 Share Posted August 27, 2019 16 hours ago, w20359 said: I've also tried adding "uart1 uart2 uart3" to the overlays line in /boot/armbianEnv.txt No needs for that since Debug UART is on "uart0" which is enabled by default. 16 hours ago, w20359 said: Is there something that I'm missing? Maybe you forgot to cross TX/RX wires ... 0 Quote Link to post Share on other sites
w20359 0 Posted August 30, 2019 Author Share Posted August 30, 2019 Thanks, i can't believe i didn't try something like this! All websites said to connect RX <-> RX and TX <-> TX. 0 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.