1 1
djmcg

OPI stuck after restart Can`t connect to Network

Recommended Posts

Hello

Today my system was suspended after 5 times hit power button OPI was turn oFF

After turn on,  can`t connect to Network by eth0 or any WI FI.

I have no idea whats happen I swap the wire but Led on eth connector in OPI  yellow/green is blinking.

 

Restart router and is the same

 

What I should do?

 

Share this post


Link to post
Share on other sites

Get a different sd card and try to boot it with a fresh image to make sure the board is not broken.

If it boots the only way to debug this further is to help yourself to an USB-TTL converter to get a serial console to the board.

Share this post


Link to post
Share on other sites

I burn new image on second SD card internet work properly.

But I need really repair the old image.

I'm attach screen from the armbian config monitor.

Look like problem with firewall network

Pls check

IMG_20200101_190438.jpg

Share this post


Link to post
Share on other sites

I assume you connected a serial console to get this information?

Anyway as far as I see there is a problem with dns resolution.

Check if /etc/resolv.conf containing valid dns server addresses.

Check if you can ping a known IPv4 address like 141.1.1.1, 8.8.8.8 or 9.9.9.9

 

 

Also interesting

https://github.com/armbian/build/blob/f4f33ce2274d77a6d97a5fbda4db279731098a4e/packages/bsp/common/usr/bin/armbianmonitor#L151

It seems like for any reason the script did not stop here as it should...

Share this post


Link to post
Share on other sites

I`m connect directly to OPI .  (desktop version)

 

The /etc/resolv.conf  is the same like version where armbian works fine connection.

 

I have no possible to ping any address

 

 

 

IMG_20200102_115101.jpg

Share this post


Link to post
Share on other sites

Missunderstanding. Please try to ping any of these adresses: 141.1.1.1, 8.8.8.8 or 9.9.9.9

 

Check the output of ifconfig if it makes sense and matches your local area network.

Share this post


Link to post
Share on other sites

The same

Regarding ifconfig is missing information inet netmask broadcast.

 

I just type

~sudo ifconfig eth0 (my dedicated IP) netmask 255.255.255.0 up

and works.

 

But after reboot is still not connect

?

 

 

IMG_20200102_135325.jpg

Share this post


Link to post
Share on other sites

The cheap and dirty way would be to add ifconfig eth0 (my dedicated IP) netmask 255.255.255.0 up to your /etc/rc.local

The correct way would be to check /etc/network/interfaces as the static ip should have been set there.

Share this post


Link to post
Share on other sites

I try to but not works right now.

I have enough of this:angry:

I just copy my old files to new image and install other stuff.

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
1 1