jaclopez1978 Posted July 12, 2020 Share Posted July 12, 2020 Hi, I installed the desktop focal version of armbian in orange pi pc. It boots correctly but after install lvm2 and restart, it does not boot. If I don't restart the orangepi the lvm volumes works fine, but after reboot or shutdown it not boot. The steps I made: Install on sd with ubuntu (restore image directly). Start the orangepi pc. That's work. sudo apt-get update sudo apt-get upgrade sudo shutdown -r now Here it works and boot correctly: sudo apt-get install lvm2 sudo shutdown -r now Here dont boot the orange pi: The log in serial console is: ***************************************************************** U-Boot SPL 2020.04-armbian (Jun 15 2020 - 06:08:51 +0200) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2020.04-armbian (Jun 15 2020 - 06:08:51 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC DRAM: 1 GiB MMC: mmc@1c0f000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface0 eth0: ethernet@1c30000 starting USB... Bus usb@1c1a000: USB EHCI 1.00 Bus usb@1c1a400: USB OHCI 1.0 Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1b400: USB OHCI 1.0 Bus usb@1c1c000: USB EHCI 1.00 Bus usb@1c1c400: USB OHCI 1.0 Bus usb@1c1d000: USB EHCI 1.00 Bus usb@1c1d400: USB OHCI 1.0 scanning bus usb@1c1a000 for devices... 1 USB Device(s) found scanning bus usb@1c1a400 for devices... 1 USB Device(s) found scanning bus usb@1c1b000 for devices... 1 USB Device(s) found scanning bus usb@1c1b400 for devices... 1 USB Device(s) found scanning bus usb@1c1c000 for devices... 1 USB Device(s) found scanning bus usb@1c1c400 for devices... 1 USB Device(s) found scanning bus usb@1c1d000 for devices... 1 USB Device(s) found scanning bus usb@1c1d400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3789 bytes read in 3 ms (1.2 MiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 203 bytes read in 2 ms (98.6 KiB/s) 14522095 bytes read in 691 ms (20 MiB/s) 7163872 bytes read in 342 ms (20 MiB/s) Found mainline kernel configuration 29475 bytes read in 7 ms (4 MiB/s) 4185 bytes read in 8 ms (510.7 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 44000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 14522031 Bytes = 13.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC Ramdisk image is corrupt or invalid SCRIPT FAILED: continuing... Device 0: unknown device ethernet@1c30000 Waiting for PHY auto negotiation to complete. done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 *** Unhandled DHCP Option in OFFER/ACK: 125 *** Unhandled DHCP Option in OFFER/ACK: 125 DHCP client bound to address 192.168.1.130 (1988 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-02-81-3c-da-a3-cb *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A80182 *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A8018 *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A801 *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A80 *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A8 *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0A *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C0 *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/C *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-sunxi *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default *** ERROR: `serverip' not set Config file not found BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 *** Unhandled DHCP Option in OFFER/ACK: 125 *** Unhandled DHCP Option in OFFER/ACK: 125 DHCP client bound to address 192.168.1.130 (2062 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 125 *** Unhandled DHCP Option in OFFER/ACK: 125 DHCP client bound to address 192.168.1.130 (3987 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ************************************************************************** The only solution I think is install lvm2 when use the disks and purge before shutdown lvm2, with crontab for example. Any help is appreciated. Thanks a lot and, sorry for my bad english 0 Quote Link to comment Share on other sites More sharing options...
jaclopez1978 Posted July 14, 2020 Author Share Posted July 14, 2020 Hi, buster works. So I move to buster. Thanks 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted July 14, 2020 Share Posted July 14, 2020 You were using an outdated image. This issue has been fixed a while ago. 0 Quote Link to comment Share on other sites More sharing options...
jaclopez1978 Posted July 24, 2020 Author Share Posted July 24, 2020 Hi, The image was directly downloaded from armbian the day 10-07-2020. The image that I have in my computer Armbian_20-05-04_Orangepipc_focal_current_5.4.45_desktop.img.xz (I think change something of the format date of the filename). 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted July 24, 2020 Share Posted July 24, 2020 This may fix it: https://github.com/armbian/build/pull/2108 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.