andyb1973 Posted October 26, 2020 Share Posted October 26, 2020 Armbianmonitor: http://ix.io/2C7f hello, my orangepi3 after the updates of firmware of these days seems to loose eth0, at reboot take eth0 and eth0:avahi with class 169 ip. i made backups (i use a sd to restore the mmc mouting hd and then copy the gzip image) so i have not problems to restore but, i suspect, the previus version is working but the new one not. sorry for my worst english... ab 0 Quote Link to comment Share on other sites More sharing options...
Igor Posted October 26, 2020 Share Posted October 26, 2020 "Linux 5.9.0-sunxi64" Please at least use supported builds when asking for attention and help on our expense - 5.9.y is currently broken due to changes in NIC driver. 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted October 26, 2020 Share Posted October 26, 2020 Quote DISTRIBUTION_CODENAME=stretch DISTRIBUTION_STATUS=eos BRANCH=dev Three reasons to not further investigate... 0 Quote Link to comment Share on other sites More sharing options...
andyb1973 Posted October 27, 2020 Author Share Posted October 27, 2020 oh my mistake, i didnt understand that was a dev version.. can i change it with armbian config or must change to buster? so in last 3 years, i was a very lucky guy thank you for all 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted October 27, 2020 Share Posted October 27, 2020 Try using armbian-config to switch to current or legacy branch 0 Quote Link to comment Share on other sites More sharing options...
andyb1973 Posted October 27, 2020 Author Share Posted October 27, 2020 found the point Werner, thank you... running change, soon i update this thread ab 0 Quote Link to comment Share on other sites More sharing options...
andyb1973 Posted October 27, 2020 Author Share Posted October 27, 2020 ok i made the change of kernel (i'm not very keen on that).. but i had to restore my previous backup (causa the update send my eth in 169 as said). ok, i restored and by armbian config i swicthed to che current versione and not the dev one. now: if i run ap update i see the list of packets to update and there is the new firmware of 5.9.. uhm... if i read well, now after armbian config into curretn versione DISTRIBUTION_CODENAME=stretch DISTRIBUTION_STATUS=eos VERSION=20.08.13 LINUXFAMILY=sunxi64 BRANCH=dev yet dev??? (http://ix.io/2Cdq) thank you in advance 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.