PoorBoy Posted November 1, 2020 Posted November 1, 2020 I tried the first start at my brandnew Helios 64. U-Boot 2020.07-armbian (Oct 13 2020 - 16:49:59 +0200) SoC: Rockchip rk3399 Reset cause: POR DRAM: 3.9 GiB PMIC: RK808 SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB MMC: mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Helios64 Revision: 1.2 - 4GB non ECC Net: eth0: ethernet@fe300000 scanning bus for devices... Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 3185 bytes read in 7 ms (444.3 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 1 117 bytes read in 7 ms (15.6 KiB/s) 14089141 bytes read in 951 ms (14.1 MiB/s) 27275776 bytes read in 1856 ms (14 MiB/s) 79946 bytes read in 17 ms (4.5 MiB/s) 2698 bytes read in 12 ms (218.8 KiB/s) Applying kernel provided DT fixup script (rockchip-fixup.scr) ## Executing script at 09000000 ## Loading init Ramdisk from Legacy Image at 06000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 14089077 Bytes = 13.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f5177000, end f5ee6b75 ... OK Loading Device Tree to 00000000f50fb000, end 00000000f5176fff ... OK Starting kernel ... But this is all i can see No login possible - is there somthing eles to know ?
PoorBoy Posted November 1, 2020 Author Posted November 1, 2020 I tried an other MicroSD- Card (only 4GB) now it works with Armbian 20.08.21 Buster. can be closed
Werner Posted November 1, 2020 Posted November 1, 2020 Support request had insufficient information anyways.
Recommended Posts