Jump to content

Recommended Posts

Posted

I'm experiencing a lot of issues on 5.10.x and thought a dedicated thread would make sense. I've posted some reports in other threads too. Note that 5.9.x is much more stable for me, but not without problems.

 

I'm also experiencing what I can only refer to as boot stalls, i.e. nothing happens. Occasionally when these stalls happen there is a rcu: INFO: rcu_preempt detected stalls on CPUs/tasks trace printed. This happens on both 5.9 and 5.10. Looking at where it stalls it seems to be around the time the hardware optimizations are applied and/or graphics modules are loaded. I have currently blocked the graphics modules from loading and have moved hardware optimizations to initrd so that they will be performed earlier. Time will tell if this has an effect or not.

 

  • Distro: Armbian Buster 21.02.3
  • Kernel: 5.10.21
  • /proc/cmdline: root=ZFS=rpool/ROOT/debian rootwait rootfstype=zfs earlycon console=ttyS2,1500000  consoleblank=0 loglevel=7 ubootpart=794023b5-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u libata.force=noncq earlyprintk ignore_loglevel  cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  • Filesystem: ZFS 2.0.3 (root on ZFS, boot from eMMC)
  • LUKS: Yes, full disk encryption (HDD -> Partition -> LUKS -> ZFS)
  • IO scheduler: None

 

Panic during boot: Unable to handle kernel write to read-only memory at virtual address ffff8000100d3a54

  Reveal hidden contents

 

Kernel bug (system left inoperable): Internal error: Oops - BUG: 0 [#1] PREEMPT SMP

  Reveal hidden contents

 

And the latest issue: WARNING: Pool 'rpool' has encountered an uncorrectable I/O failure and has been suspended.

Note: The warning above was only printed the latter time, but the same symptom occurred two times within two days. I.e. everything is stuck in iowait and it's basically impossible to do anything with the system. This only happens on 5.10, and happened two times within two days. On 5.9 (ZFS 2.0.3 as well) there is no such issue.

  Reveal hidden contents

 

Anyway, I'm back on 5.9.14 for the time being. Just finished a full scrub of the ZFS filesystem as well, no issues or errors.

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines