mrv Posted November 14, 2022 Share Posted November 14, 2022 Hi to everyone, I configured Network Manager to have a local-link connection (eth0-ll) as DHCP fallback (eth0-auto). When I do the following: Connect Orange Pi in a net without DHCP, obtaining a local link address Unplug ethernet cable Plug another ethernet cable connected to a network with DHCP If step 2 and step 3 are executed rapidly, the Orange Pi doesn't detect the network switching and eth0 keeps its local-link address. When I perform such steps slowly, Orange Pi detect which ethernet cable is not plugged in and then everything works as expected. How can I increase the refresh rate of the ethernet cable state? eth0-auto.nmconnection [connection] id=eth0-auto uuid=f3e05ca1-169d-43e7-9482-a1ed73cf6eb1 type=ethernet autoconnect-priority=100 autoconnect-retries=2 interface-name=eth0 permissions= [ethernet] mac-address-blacklist= [ipv4] dhcp-timeout=10 dns-search= method=auto [ipv6] addr-gen-mode=stable-privacy dns-search= method=disabled [proxy] eth0-ll.nmconnection [connection] id=eth0-ll uuid=29cd8244-a477-41f8-be44-85c3c5c2bf57 type=ethernet autoconnect-priority=50 interface-name=eth0 permissions= [ethernet] mac-address-blacklist= [ipv4] dns-search= method=link-local [ipv6] addr-gen-mode=stable-privacy dns-search= method=disabled [proxy] 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted November 14, 2022 Share Posted November 14, 2022 Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed. 0 Quote Link to comment Share on other sites More sharing options...
mrv Posted November 14, 2022 Author Share Posted November 14, 2022 This is the result after fast plug in/out: https://paste.armbian.com/hinehiresa This is the result after slow plug in/out: https://paste.armbian.com/usejemecey 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.