Jump to content

Bluetooth(AP6256) with kernel 6.0.11 dose not work?


swordow

Recommended Posts

Hi guys,

I am building armbian image for rockpi4b+  and its kernel is 6.0.11(edge version) and the bluetooth failed start up. If anyone knows what kernel 6.0.11  did that cause the problem:

wzkiro@rockpi-4bplus:~$ dmesg | grep brcm
[    7.069061] brcmfmac: F1 signature read @0x18000000=0x15294345
[    7.108688] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    7.109142] usbcore: registered new interface driver brcmfmac
[    7.236547] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    7.245940] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3
wzkiro@rockpi-4bplus:~$ dmesg | grep Bluetooth
[    7.089775] Bluetooth: Core ver 2.22
[    7.089894] Bluetooth: HCI device and connection manager initialized
[    7.089914] Bluetooth: HCI socket layer initialized
[    7.089922] Bluetooth: L2CAP socket layer initialized
[    7.089943] Bluetooth: SCO socket layer initialized
[    7.394043] Bluetooth: HCI UART driver ver 2.3
[    7.394074] Bluetooth: HCI UART protocol H4 registered
[    7.394081] Bluetooth: HCI UART protocol BCSP registered
[    7.403820] Bluetooth: HCI UART protocol LL registered
[    7.403831] Bluetooth: HCI UART protocol ATH3K registered
[    7.405384] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    7.416771] Bluetooth: HCI UART protocol Intel registered
[    7.440646] Bluetooth: HCI UART protocol Broadcom registered
[    7.453388] Bluetooth: HCI UART protocol QCA registered
[    7.453410] Bluetooth: HCI UART protocol AG6XX registered
[    7.459664] Bluetooth: HCI UART protocol Marvell registered
[    9.738700] Bluetooth: hci0: command 0xfc18 tx timeout
[   13.642153] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.642193] Bluetooth: BNEP filters: protocol multicast
[   13.642220] Bluetooth: BNEP socket layer initialized
[   17.894543] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[   17.894570] Bluetooth: hci0: Failed to set baudrate
[   19.910475] Bluetooth: hci0: command 0x0c03 tx timeout
[   28.484626] Bluetooth: hci0: BCM: Reset failed (-110)

 

Link to comment
Share on other sites

The same issue on 
Linux rockpi-4b 5.15.80-rockchip64 #22.11.1 SMP PREEMPT Wed Nov 30 11:12:47 UTC 2022 aarch64 aarch64 aarch64 GNU/Linux
 

root@rockpi-4b:~# dmesg | grep -E 'brcm|Blue|ieee'
[    6.249179] Bluetooth: Core ver 2.22
[    6.254368] Bluetooth: HCI device and connection manager initialized
[    6.254394] Bluetooth: HCI socket layer initialized
[    6.254404] Bluetooth: L2CAP socket layer initialized
[    6.254436] Bluetooth: SCO socket layer initialized
[    6.383936] Bluetooth: HCI UART driver ver 2.3
[    6.383950] Bluetooth: HCI UART protocol H4 registered
[    6.383953] Bluetooth: HCI UART protocol BCSP registered
[    6.418331] Bluetooth: HCI UART protocol LL registered
[    6.418378] Bluetooth: HCI UART protocol ATH3K registered
[    6.418440] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.418633] Bluetooth: HCI UART protocol Intel registered
[    6.418751] Bluetooth: HCI UART protocol Broadcom registered
[    6.418789] Bluetooth: HCI UART protocol QCA registered
[    6.418792] Bluetooth: HCI UART protocol AG6XX registered
[    6.418821] Bluetooth: HCI UART protocol Marvell registered
[    6.594485] brcmfmac: F1 signature read @0x18000000=0x15294345
[    6.608268] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    6.610770] usbcore: registered new interface driver brcmfmac
[    6.728817] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    6.737001] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3
[    8.710416] Bluetooth: hci0: command 0x0c03 tx timeout
[   13.126119] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.126132] Bluetooth: BNEP filters: protocol multicast
[   13.126143] Bluetooth: BNEP socket layer initialized
[   16.870393] Bluetooth: hci0: BCM: Reset failed (-110)
[   23.782177] ieee80211 phy0: brcmf_escan_timeout: timer expired

 

Edited by Константин Литвинов
Link to comment
Share on other sites

@Igor

The firmware from https://github.com/armbian/firmware (which is built at 2017) does not work.

wzkiro@rockpi-4bplus:~$ dmesg | grep -E "Blue|brcm"
[    7.214555] Bluetooth: Core ver 2.22
[    7.214678] Bluetooth: HCI device and connection manager initialized
[    7.214698] Bluetooth: HCI socket layer initialized
[    7.214707] Bluetooth: L2CAP socket layer initialized
[    7.214727] Bluetooth: SCO socket layer initialized
[    7.321477] brcmfmac: F1 signature read @0x18000000=0x15294345
[    7.352797] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    7.474137] usbcore: registered new interface driver brcmfmac
[    7.475277] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    7.481798] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84
[    7.647372] Bluetooth: HCI UART driver ver 2.3
[    7.647401] Bluetooth: HCI UART protocol H4 registered
[    7.647405] Bluetooth: HCI UART protocol BCSP registered
[    7.647489] Bluetooth: HCI UART protocol LL registered
[    7.647494] Bluetooth: HCI UART protocol ATH3K registered
[    7.647547] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    7.647870] Bluetooth: HCI UART protocol Intel registered
[    7.648088] Bluetooth: HCI UART protocol Broadcom registered
[    7.648244] Bluetooth: HCI UART protocol QCA registered
[    7.648249] Bluetooth: HCI UART protocol AG6XX registered
[    7.648299] Bluetooth: HCI UART protocol Marvell registered
[    7.811743] Bluetooth: null: hu (____ptrval____)
[    7.932867] Bluetooth: hci0: Set Controller UART speed to 1500000 bit/s
[    7.934219] Bluetooth: hci0: hu (____ptrval____) skb (____ptrval____)
[    9.951102] Bluetooth: hci0: command 0xfc18 tx timeout
[   14.271949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.271980] Bluetooth: BNEP filters: protocol multicast
[   14.272003] Bluetooth: BNEP socket layer initialized
[   18.142933] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[   18.142963] Bluetooth: hci0: Failed to set baudrate
[   18.142968] Bluetooth: hci0: hu 000000002add66b5
[   18.143005] Bluetooth: hci0: hu 000000002add66b5 skb 00000000b978f471
[   20.158883] Bluetooth: hci0: command 0x0c03 tx timeout
[   28.659471] Bluetooth: hci0: BCM: Reset failed (-110)
[   28.659542] Bluetooth: hci0: hu 000000002add66b5
[   28.659577] Bluetooth: hci0: hu 000000002add66b5

Also the firmware from https://gitlab.manjaro.org/manjaro-arm/packages/community/ap6256-firmware (which is built in 2020) does not work 

The weird thing is that using kernel 5.15.y (armbian current version) also does not work...

 

I dont know if the  kernel 5.10 would make it work...

 

em... I tested the armbian image(https://fi.mirror.armbian.de/archive/rockpi-4b/archive/Armbian_21.08.1_Rockpi-4b_bullseye_current_5.10.60.img.xz.txt) in rockpi 4b+ roughly, it works:

wzkiro@rockpi-4b:~$ dmesg | grep -E "Bluetooth|brcm"
[   29.724565] Bluetooth: Core ver 2.22
[   29.724717] Bluetooth: HCI device and connection manager initialized
[   29.724738] Bluetooth: HCI socket layer initialized
[   29.724748] Bluetooth: L2CAP socket layer initialized
[   29.724773] Bluetooth: SCO socket layer initialized
[   29.871182] Bluetooth: HCI UART driver ver 2.3
[   29.871189] Bluetooth: HCI UART protocol H4 registered
[   29.871193] Bluetooth: HCI UART protocol BCSP registered
[   29.871252] Bluetooth: HCI UART protocol LL registered
[   29.871255] Bluetooth: HCI UART protocol ATH3K registered
[   29.871276] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   29.871449] Bluetooth: HCI UART protocol Intel registered
[   29.871561] Bluetooth: HCI UART protocol Broadcom registered
[   29.871591] Bluetooth: HCI UART protocol QCA registered
[   29.871594] Bluetooth: HCI UART protocol AG6XX registered
[   29.871616] Bluetooth: HCI UART protocol Marvell registered
[   29.877985] brcmfmac: F1 signature read @0x18000000=0x15294345
[   29.888339] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[   29.893679] usbcore: registered new interface driver brcmfmac
[   29.895916] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b.txt failed with error -2
[   30.011957] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[   30.012057] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   30.012402] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3
[   30.122616] systemd[1]: Reached target Bluetooth.
[   30.235644] Bluetooth: hci0: BCM: chip id 130
[   30.238004] Bluetooth: hci0: BCM: features 0x0f
[   30.261185] Bluetooth: hci0: BCM4345C5
[   30.261213] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[   30.270058] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
[   35.433001] Bluetooth: hci0: BCM4345C5 Ampak_CL1 UART 37.4 MHz BT 5.0 [Version: Version: 0039.0089]
[   35.433043] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0089

 

Edited by swordow
Link to comment
Share on other sites

@Константин Литвинов

 

wzkiro@rockpi-4b:~$ uname -r
5.10.60-rockchip64
wzkiro@rockpi-4b:~$ sudo iwlist wlan0 freq
wlan0     32 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 100 : 5.5 GHz
          Channel 104 : 5.52 GHz
          Channel 108 : 5.54 GHz
          Channel 112 : 5.56 GHz
          Channel 116 : 5.58 GHz
          Channel 120 : 5.6 GHz
          Channel 124 : 5.62 GHz
          Channel 128 : 5.64 GHz
          Channel 132 : 5.66 GHz
          Channel 136 : 5.68 GHz
          Channel 140 : 5.7 GHz
          Channel 144 : 5.72 GHz
          Channel 149 : 5.745 GHz
wzkiro@rockpi-4b:~$

 

Link to comment
Share on other sites

em.. i tested 5.15.63:

root@rockpi-4b:~# uname -r
5.15.63-rockchip64
root@rockpi-4b:~# dmesg | grep -E "Blue|brcm"
[    6.081261] Bluetooth: Core ver 2.22
[    6.082275] Bluetooth: HCI device and connection manager initialized
[    6.082318] Bluetooth: HCI socket layer initialized
[    6.082332] Bluetooth: L2CAP socket layer initialized
[    6.082400] Bluetooth: SCO socket layer initialized
[    6.155682] brcmfmac: F1 signature read @0x18000000=0x15294345
[    6.181312] Bluetooth: HCI UART driver ver 2.3
[    6.181335] Bluetooth: HCI UART protocol H4 registered
[    6.181339] Bluetooth: HCI UART protocol BCSP registered
[    6.181420] Bluetooth: HCI UART protocol LL registered
[    6.181425] Bluetooth: HCI UART protocol ATH3K registered
[    6.181475] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    6.181818] Bluetooth: HCI UART protocol Intel registered
[    6.182021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    6.182080] Bluetooth: HCI UART protocol Broadcom registered
[    6.182140] Bluetooth: HCI UART protocol QCA registered
[    6.182145] Bluetooth: HCI UART protocol AG6XX registered
[    6.182195] Bluetooth: HCI UART protocol Marvell registered
[    6.182698] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b.bin failed with error -2
[    6.188317] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b.txt failed with error -2
[    6.211295] usbcore: registered new interface driver brcmfmac
[    6.315392] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    6.321302] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3
[    6.571175] Bluetooth: hci0: BCM: chip id 130
[    6.573449] Bluetooth: hci0: BCM: features 0x0f
[    6.573887] systemd[1]: Reached target Bluetooth.
[    6.596565] Bluetooth: hci0: BCM4345C5
[    6.596593] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[    6.597625] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
[   11.760691] Bluetooth: hci0: BCM4345C5 Ampak_CL1 UART 37.4 MHz BT 5.0 [Version: Version: 0039.0089]
[   11.760709] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0089
root@rockpi-4b:~#

 

With kernel 5.15.63, the bluetooth works, and as this following topic  said, from 5.15.76, the bluetook may does not work...

 

 

I built the armbian with kernel 5.15.74, the bluetooth works...

root@rockpi-4bplus:~# uname -r
5.15.74-rockchip64
root@rockpi-4bplus:~# dmesg | grep -E "Blue|brcm"
[    8.107498] Bluetooth: Core ver 2.22
[    8.107585] Bluetooth: HCI device and connection manager initialized
[    8.107597] Bluetooth: HCI socket layer initialized
[    8.107602] Bluetooth: L2CAP socket layer initialized
[    8.107614] Bluetooth: SCO socket layer initialized
[    8.225772] brcmfmac: F1 signature read @0x18000000=0x15294345
[    8.230225] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    8.230903] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b-plus.bin failed with error -2
[    8.235162] usbcore: registered new interface driver brcmfmac
[    8.235913] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b-plus.txt failed with error -2
[    8.288469] Bluetooth: HCI UART driver ver 2.3
[    8.288481] Bluetooth: HCI UART protocol H4 registered
[    8.288484] Bluetooth: HCI UART protocol BCSP registered
[    8.288533] Bluetooth: HCI UART protocol LL registered
[    8.288535] Bluetooth: HCI UART protocol ATH3K registered
[    8.288555] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.288731] Bluetooth: HCI UART protocol Intel registered
[    8.288817] Bluetooth: HCI UART protocol Broadcom registered
[    8.301058] Bluetooth: HCI UART protocol QCA registered
[    8.301070] Bluetooth: HCI UART protocol AG6XX registered
[    8.301114] Bluetooth: HCI UART protocol Marvell registered
[    8.344998] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    8.351696] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84
[    8.647379] systemd[1]: Reached target Bluetooth.
[    8.699723] Bluetooth: hci0: BCM: chip id 130
[    8.700080] Bluetooth: hci0: BCM: features 0x0f
[    8.702178] Bluetooth: hci0: BCM4345C5
[    8.702198] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[    8.703234] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
[    9.554374] Bluetooth: hci0: BCM4345C5 Ampak_CL1 UART 37.4 MHz BT 5.0 [Version: Version: 0039.0089]
[    9.554423] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0089
root@rockpi-4bplus:~#

 

Test kernel 5.15.75, bluetooh failed to start.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/?id=v5.15.75&id2=v5.15.74&dt=2

from kernel 5.15.74 to 5.15.75, there are some bluetooh related patches:

...
-rw-r--r--	drivers/bluetooth/btintel.c	17	
-rw-r--r--	drivers/bluetooth/btusb.c	14	
-rw-r--r--	drivers/bluetooth/hci_ldisc.c	7	
-rw-r--r--	drivers/bluetooth/hci_serdev.c	10	
...
-rw-r--r--	net/bluetooth/hci_core.c	34	
-rw-r--r--	net/bluetooth/hci_sysfs.c	3	
-rw-r--r--	net/bluetooth/l2cap_core.c	17	
-rw-r--r--	net/bluetooth/rfcomm/sock.c	3	
....

Maybe some of them break the bluetooth or maybe other uart related drivers(8250 etc) patches break it...

Edited by swordow
Link to comment
Share on other sites

Great bisect @swordow-- any indications on why those upstream changes break it?

possibly, some change has to be done in the DT to accommodate.

does 6.1 work? maybe said change is already done.

Reverting the changes from upstream would be bad for other boards in the family ofc

Link to comment
Share on other sites

18.12.2022 в 15:45, rpardini сказал:

does 6.1 work? maybe said change is already done.


Hello, no in 6.1 it's still doesn't work 
 

root@rockpi-4b:~# uname -a
Linux rockpi-4b 6.1.0-rockchip64 #trunk.0055 SMP PREEMPT Fri Dec 16 13:28:04 UTC 2022 aarch64 GNU/Linux
root@rockpi-4b:~# dmesg | grep -E 'brcm|Blue|ieee'
[    9.726956] Bluetooth: Core ver 2.22
[    9.726979] Bluetooth: Starting self testing
[    9.747224] brcmfmac: F1 signature read @0x18000000=0x15294345
[    9.752572] Bluetooth: ECDH test passed in 24985 usecs
[    9.753978] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    9.754443] usbcore: registered new interface driver brcmfmac
[    9.758076] Bluetooth: SMP test passed in 5295 usecs
[    9.758124] Bluetooth: Finished self testing
[    9.758232] Bluetooth: HCI device and connection manager initialized
[    9.758254] Bluetooth: HCI socket layer initialized
[    9.758265] Bluetooth: L2CAP socket layer initialized
[    9.758288] Bluetooth: SCO socket layer initialized
[   10.014472] Bluetooth: HCI UART driver ver 2.3
[   10.014504] Bluetooth: HCI UART protocol H4 registered
[   10.014511] Bluetooth: HCI UART protocol BCSP registered
[   10.014668] Bluetooth: HCI UART protocol LL registered
[   10.014679] Bluetooth: HCI UART protocol ATH3K registered
[   10.014735] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.015237] Bluetooth: HCI UART protocol Intel registered
[   10.016319] Bluetooth: HCI UART protocol Broadcom registered
[   10.016409] Bluetooth: HCI UART protocol QCA registered
[   10.016416] Bluetooth: HCI UART protocol AG6XX registered
[   10.016449] Bluetooth: HCI UART protocol Marvell registered
[   10.120786] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84
[   10.273867] systemd[1]: Reached target Bluetooth Support.
[   12.288751] Bluetooth: hci0: command 0xfc18 tx timeout
[   20.448622] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[   20.448652] Bluetooth: hci0: Failed to set baudrate
[   22.464451] Bluetooth: hci0: command 0x0c03 tx timeout
[   30.688615] Bluetooth: hci0: BCM: Reset failed (-110)

 

Link to comment
Share on other sites

@iamdrq i remove the patch and bt works, thanks!

wzkiro@rockpi4bp:~$ uname -a
Linux rockpi4bp 5.15.85-rockchip64 #trunk SMP PREEMPT Thu Dec 22 03:00:28 PST 2022 aarch64 GNU/Linux
wzkiro@rockpi4bp:~$ sudo dmesg | grep -E "Blue|brcm"
[    8.468214] Bluetooth: Core ver 2.22
[    8.469180] Bluetooth: HCI device and connection manager initialized
[    8.469193] Bluetooth: HCI socket layer initialized
[    8.469198] Bluetooth: L2CAP socket layer initialized
[    8.469221] Bluetooth: SCO socket layer initialized
[    8.732341] Bluetooth: HCI UART driver ver 2.3
[    8.732356] Bluetooth: HCI UART protocol H4 registered
[    8.732359] Bluetooth: HCI UART protocol BCSP registered
[    8.732419] Bluetooth: HCI UART protocol LL registered
[    8.732423] Bluetooth: HCI UART protocol ATH3K registered
[    8.732448] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.732700] Bluetooth: HCI UART protocol Intel registered
[    8.732820] Bluetooth: HCI UART protocol Broadcom registered
[    8.732863] Bluetooth: HCI UART protocol QCA registered
[    8.732866] Bluetooth: HCI UART protocol AG6XX registered
[    8.735141] Bluetooth: HCI UART protocol Marvell registered
[    8.819001] brcmfmac: F1 signature read @0x18000000=0x15294345
[    8.822932] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    8.828068] usbcore: registered new interface driver brcmfmac
[    8.991602] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
[    9.000345] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3
[    9.001146] systemd[1]: Reached target Bluetooth.
[    9.095718] Bluetooth: hci0: BCM: chip id 130
[    9.096138] Bluetooth: hci0: BCM: features 0x0f
[    9.098290] Bluetooth: hci0: BCM4345C5
[    9.098312] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[    9.115258] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
[    9.946082] Bluetooth: hci0: BCM4345C5 Ampak_CL1 UART 37.4 MHz BT 5.0 [Version: Version: 0039.0089]
[    9.946115] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0089

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines