wzor Posted May 14, 2017 Posted May 14, 2017 The problem is M8S +.I'm enclosing the log.4.11 put, the kernel does not load at all !!! putty.log
wzor Posted May 14, 2017 Posted May 14, 2017 No! Armbian_5.27_S812_Ubuntu_xenial_3.10.99 3.10 kernel. 4.11 kernel no load!
balbes150 Posted May 14, 2017 Posted May 14, 2017 Yes, I meant - 3.x. Have you tried all the dtb files from the directory ? Still need to try to run from a USB flash drive.
RaptorSDS Posted May 15, 2017 Posted May 15, 2017 But is the m8s+ a S9xx chip ? Or still a S8xx ( maybe 805 but than he has the wrong image S802 /812 )
balbes150 Posted May 15, 2017 Posted May 15, 2017 Update test image kernel 4.11 and deb packages from it (yandex and Mega). This way I have a start on Tronsmart MXIII Plus with SD card (when using the dtb file miii-plus). Is only works through the console UART. Network is not working.
wzor Posted May 15, 2017 Posted May 15, 2017 Run sdcard Armbian_5.27_S812_Ubuntu_xenial_4.11.0+_server_20170515. Hdmi does not work. $ sudo dpkg -i linux-image-dev-vegas812_5.27_armhf.deb dpkg-deb: error: 'linux-image-dev-vegas812_5.27_armhf.deb' is not a debian format archive dpkg: error processing archive linux-image-dev-vegas812_5.27_armhf.deb (--install): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: linux-image-dev-vegas812_5.27_armhf.deb $ sudo dpkg -i linux-headers-dev-vegas812_5.27_armhf.deb dpkg-deb: error: 'linux-headers-dev-vegas812_5.27_armhf.deb' is not a debian format archive dpkg: error processing archive linux-headers-dev-vegas812_5.27_armhf.deb (--install): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: linux-headers-dev-vegas812_5.27_armhf.deb $ sudo dpkg -i linux-dtb-dev-vegas812_5.27_armhf.deb dpkg-deb: error: 'linux-dtb-dev-vegas812_5.27_armhf.deb' is not a debian format archive dpkg: error processing archive linux-dtb-dev-vegas812_5.27_armhf.deb (--install): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: linux-dtb-dev-vegas812_5.27_armhf.deb 1
wzor Posted May 15, 2017 Posted May 15, 2017 This one can run High Quality USB 2.0 to Ethernet 10 / 100Mbps Network LAN RJ45 Adapter ?
RaptorSDS Posted May 15, 2017 Posted May 15, 2017 i add this lines to my dts file pwmleds { compatible = "pwm-leds"; power { label = "m8s:blue:power"; pwms = <pwm_ef 1 7812500 0>; max-brightness = <255>; active-low; linux,default-trigger = "default-on"; }; }; pwm_ef { status = "okay"; pinctrl-0 = <pwm_e_pins>, <pwm_f_ao_pins>; pinctrl-names = "default"; clocks = <clkc CLKID_FCLK_DIV3>, <clkc CLKID_FCLK_DIV4>; clock-names = "clkin0", "clkin1"; }; but i got still sytax error in the DTC please can you add the led funktion to the meason8s2 n200.dtb for me ? m8s.dtb m8s.dts
RaptorSDS Posted May 15, 2017 Posted May 15, 2017 3 hours ago, balbes150 said: Update test image kernel 4.11 and deb packages from it (yandex and Mega). This way I have a start on Tronsmart MXIII Plus with SD card (when using the dtb file miii-plus). Is only works through the console UART. Network is not working. i test your kernel , m8s.dtb , work i can log in start time about 2-3min but 2 error first at usb only my printer show not the canon scanner at the other usb port , second at shutdown the blue led still on dont switch to red Kernel test 4.11 from 15.05 m8s.dtb .log
balbes150 Posted May 16, 2017 Posted May 16, 2017 16 hours ago, wzor said: Run sdcard Armbian_5.27_S812_Ubuntu_xenial_4.11.0+_server_20170515. Hdmi does not work. As it should be. This is a test image , there is no support for many elements. 15 hours ago, RaptorSDS said: please can you add the led funktion to the meason8s2 n200.dtb for me ? What kind of kernel you write ? 14 hours ago, RaptorSDS said: first at usb only my printer show not the canon scanner at the other usb port , second at shutdown the blue led still on dont switch to red And USB LED is not working completely.
wzor Posted May 17, 2017 Posted May 17, 2017 balbes150 $ sudo dpkg -i linux-image-dev-vegas812_5.27_armhf.deb (Reading database ... 52241 files and directories currently installed.) Preparing to unpack linux-image-dev-vegas812_5.27_armhf.deb ... Unpacking linux-image-dev-vegas812 (5.27) over (5.27) ... dpkg: error processing archive linux-image-dev-vegas812_5.27_armhf.deb (--install): unable to make backup link of './boot/vmlinuz-4.11.0+' before installing new version: Operation not permitted dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: linux-image-dev-vegas812_5.27_armhf.deb ???
balbes150 Posted May 22, 2017 Posted May 22, 2017 Updated image Mate and server kernel 3.10 (20170522). Added dtb m8s.
RaptorSDS Posted May 24, 2017 Posted May 24, 2017 On 22.5.2017 at 4:43 PM, balbes150 said: Updated image Mate and server kernel 3.10 (20170522). Added dtb m8s. i test today but i have problems to optain a ip addr from dhclient , i connect to my wlan ( iwconfig told me all fine) than i start dhclient and nothing ( i start and restart ntp deamon but this time no effect) . 1
balbes150 Posted May 25, 2017 Posted May 25, 2017 I can't check for WiFi in s812. You should try to use other dtb and see how to work with them.
RaptorSDS Posted May 25, 2017 Posted May 25, 2017 46 minutes ago, balbes150 said: I can't check for WiFi in s812. You should try to use other dtb and see how to work with them. i have use m8s.dtb , n200_2gb.dtb and the one from the my backup .all with same result . my steps i have flash sdcard change modules to 8723bs and blacklist in modprobe.d dhd change interfaces set lan to static and wlan to hotlpug and dhcp than iwlist for wlan ( find my one ) check ntp is running iwconfig setup my ssid and key iwconfig ( check of wlan connection) and than dhclient (but dont do anything , have to ctrl+c ) test with wpa_supplicant but same result . do you have a changelog of the new image 3.10.99
balbes150 Posted May 25, 2017 Posted May 25, 2017 30 minutes ago, RaptorSDS said: change modules to 8723bs a What does "change module" ? You copy the system other files ?
wzor Posted May 25, 2017 Posted May 25, 2017 Quote Updated image Mate and server kernel 3.10 (20170522). Hdmi does not work (Lan does not work (Wifi is working. My dtb file. With others does not work. meson4.dtb
RaptorSDS Posted May 25, 2017 Posted May 25, 2017 24 minutes ago, balbes150 said: What does "change module" ? You copy the system other files ? no lsmod show 8723bs is the modul for my wlan i change ( nano /etc/modules) from dhd to 8723bs and change (nano /etc/modprobe.d/blacklist.conf) insert blacklist dhd than my wifi work
RaptorSDS Posted May 25, 2017 Posted May 25, 2017 On 22.5.2017 at 4:43 PM, balbes150 said: Added dtb m8s also thank you for add led but i use the dtb for my running rom but still no led trigger at sys/class/leds , did i need a modul or something more ?
balbes150 Posted May 25, 2017 Posted May 25, 2017 1 hour ago, wzor said: Hdmi does not work ( As the monitor is connected, via an adapter or directly to HDMI ? 1 hour ago, wzor said: My dtb file. With others does not work. What kind of wired network 100, or 1000 ? 1 hour ago, RaptorSDS said: lsmod show 8723bs is the modul for my wlan Try to reset the bindings on the router. 14 minutes ago, RaptorSDS said: also thank you for add led but i use the dtb for my running rom but still no led trigger at sys/class/leds , did i need a modul or something more ? You need to find the right settings (change the source, to collect the utility of the DTC , test the work). https://github.com/150balbes/Amlogic_s8xx-kernel/blob/S812/arch/arm/boot/dts/meson8m2_n200_m8s.dts#L568
balbes150 Posted May 25, 2017 Posted May 25, 2017 1 hour ago, wzor said: My dtb file. With others does not work. Try this option. https://yadi.sk/d/qm-o7QH03JWPEg
RaptorSDS Posted May 25, 2017 Posted May 25, 2017 15 minutes ago, balbes150 said: Try to reset the bindings on the router. i done this with new image but no luck its maybe like this problem https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/267891 i have also "ifup wlan0" like 20 time dhcp discovery 255.255.255.255 and than close Quote You need to find the right settings (change the source, to collect the utility of the DTC , test the work). you mean find gpio pins ?
balbes150 Posted May 25, 2017 Posted May 25, 2017 44 minutes ago, RaptorSDS said: you mean find gpio pins ? You need to compare what is written in the normal dtb and put it in the new to check.
wzor Posted May 25, 2017 Posted May 25, 2017 2 hours ago, balbes150 said: Try this option. https://yadi.sk/d/qm-o7QH03JWPEg wire network has earned!!! HDMI is connected to the TV. Does not work((( On "Armbian_5.24_Vegas812_Ubuntu_xenial_3.10.99_desktop_20170113" hdmi worked perfectly !!!!
balbes150 Posted May 25, 2017 Posted May 25, 2017 Try to set configuration file /boot/hdmi.sh or /boot/amlogics905x_init.sh value instead "mode=720p" to "mode=1080i59Hz"
Recommended Posts