Max current 5v gpio power of Orange Pi Lite


danybr
 Share

0

Recommended Posts

Donate and support the project!

16 minutes ago, danybr said:

I already know how GPIO pins are mapped on Orange Pi Lite

 

It's still about the orientation of the whole header (180°) and not pin mappings! And if you're talking about GPIO pins 2 and 4 then they're directly connected to DC-IN (you can even power Orange Pis through these pins and any of the GND pins on the header)

Link to post
Share on other sites

On 4.5.2017 at 9:43 PM, danybr said:

Which is the maximum current delivered by the pin 5v of the gpio in an Orange Pi LITE?

I would like to connect on it some sensors that needs 5v power supply.

 

5V GPIO pins on OPI LITE are directly connected to 5V power in socket and also to USB 5V without protection.  I've even been back-feeding power through one of the USB-ports. You can probably safely draw some <1000mA powering your sensors ( not actuators....) from the GPIO-pins, just make sure to use a decent power supply for the board. Best of luck.   

 

 

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

0