OPI 4A - Allwinner T527

[Marvin-03]

Am 3.1.2026 um 22:15 schrieb L. Jorge Soares:

resetting ...
sunxi_set_gate: (CLK#35) unhandled

U-Boot SPL 2026.01-rc4_armbian-2026.01-rc4-S0e0a-P5fd4-H5aa4-Vd69a-B4d1d-R448a (Jan 03 2026 - 15:39:28 -0500)
DRAM: 4096 MiB
Failed to set core voltage! Can't set CPU frequency
Trying to boot from MMC1
NOTICE:  BL31: v2.12.0(debug):armbian
NOTICE:  BL31: Built : 14:33:47, Jan  3 2026
NOTICE:  BL31: Detected Allwinner A523 SoC (1890)
NOTICE:  BL31: Found U-Boot DTB at 0xa0a8d48, model: OrangePi 4A
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 287
INFO:    Configuring SPC Controller
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a55: CPU workaround for erratum 1530923 was applied
INFO:    PSCI: Suspend is unavailable
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9
ns16550_serial serial@2500000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19

U-Boot 2026.01-rc4_armbian-2026.01-rc4-S0e0a-P5fd4-H5aa4-Vd69a-B4d1d-R448a (Jan 03 2026 - 15:39:28 -0500) Allwinner Technology

CPU:   Allwinner A523 (SUN55I)
Model: OrangePi 4A
DRAM:  4 GiB
Core:  65 devices, 21 uclasses, devicetree: separate
WDT:   Not starting watchdog@2050000
MMC:   mmc@4020000: 0, mmc@4021000: 1, mmc@4022000: 2
Loading Environment from FAT... ** No valid partitions found **
In:    serial@2500000
Out:   serial@2500000
Err:   serial@2500000
Net:   No ethernet found.
Hit any key to stop autoboot: 0
PCIe: Acquiring resources...
PCIe: Failed to parse num-lanes, using default: 1
PCIe: Failed to get switch-sel GPIO: -2
PCIe: Hardware init failed with error -2

Device 0: unknown device
switch to partitions #0, OK
mmc0 is current device
** Invalid partition 1 **
Couldn't find partition mmc 0:1
PCIe: Acquiring resources...
PCIe: Failed to parse num-lanes, using default: 1
PCIe: Failed to get switch-sel GPIO: -2
PCIe: Hardware init failed with error -2
No ethernet found.
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
Retrieving file: pxelinux.cfg/000000
No ethernet found.
Retrieving file: pxelinux.cfg/00000
No ethernet found.
Retrieving file: pxelinux.cfg/0000
No ethernet found.
Retrieving file: pxelinux.cfg/000
No ethernet found.
Retrieving file: pxelinux.cfg/00
No ethernet found.
Retrieving file: pxelinux.cfg/0
No ethernet found.
Retrieving file: pxelinux.cfg/default-arm-sunxi-sunxi
No ethernet found.
Retrieving file: pxelinux.cfg/default-arm-sunxi
No ethernet found.
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
PCIe: Acquiring resources...
PCIe: Failed to parse num-lanes, using default: 1
PCIe: Failed to get switch-sel GPIO: -2
PCIe: Hardware init failed with error -2
No ethernet found.
No ethernet found.

Can you test these commands in u-boot?

mmc list

mmc info

mmc dev 0

mmc part

fatls mmc 0:1

ext4ls mmc0:2

mmc read 0x40000000 0 1

 

It seems like mega doesnt work anymore without login. 

Here are the images on gdrive: https://drive.google.com/drive/folders/1jEIWmzZgT5t39jRz7GwZpFOAdjdQBLtG?usp=drive_link

 

Edited 16 hours ago by Marvin-03

[L. Jorge Soares]

@Marvin-03

 

Here are the results of the commands provided, hope this help.  Thanks for the link of your image builds, will try them out.

 

Quote

=> mmc list
mmc@4020000: 0 (SD)
mmc@4021000: 1
mmc@4022000: 2
=> mmc info
Device: mmc@4020000
Manufacturer ID: 3
OEM: 5344
Name: AFGCD
Bus Speed: 50000000
Mode: SD High Speed (50MHz)
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 29.7 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
=> mmc dev 0
switch to partitions #0, OK
mmc0 is current device
=> mmc part

Partition Map for mmc device 0  --   Partition Type: EFI

=> fatls mmc 0:1
** Invalid partition 1 **
Couldn't find partition mmc 0:1
=> ext4ls mmc 0:2
** Invalid partition 2 **
Couldn't find partition mmc 0:2
=> fatls mmc0:1
** No device specified **
Couldn't find partition mmc0:1 <NULL>
=> ext4ls mmc0:2
** No device specified **
Couldn't find partition mmc0:2 <NULL>
=> mmc read 0x40000000 0 1
MMC read: dev # 0, block # 0, count 1 ... 1 blocks read: OK
=>