Any working orangepi5-pro image?

[salas]

Is there any working image for orangepi5-pro?

I am having trouble to understand a few things in the https://www.armbian.com/orange-pi-5-pro/

 

It says:

 

 

Quote

PCI support is broken on vendor kernel (6.1.xx) on versions higher then 24.8.1. Use this version and freeze kernel (armbian-config -> system) prior to updating OS. PCI works on other Rockchip 3588 devices, while fixing this on all represent expensive technical challenge which we will be able to proceed once your donations for entire project reaches at least 1000 USD per month. With Orangepi devices we have extremely high negative support budget. Alternative operating systems that relies on our work face the same problem. We appreciate for your understanding.

 

 

But downloding the image on that page brings Armbian_community_25.8.0-trunk.38_Orangepi5pro_bookworm_vendor_6.1.115_minimal.img.xz

which is version 25.8.0 and that image wont boot.

 

 

 

[Michael Robinson]

https://github.com/armbian/build/

[Werner]

Check assets at community releases as csc hw is ususally not on mirrors but on GH: https://github.com/armbian/community/releases

[salas]

Hi @Michael Robinson, thanks for the help, but one of the first things i did was check the build process. Unfortunately there is no orangepi5-pro board in the v24.8.1 branch which makes that warning about 24.8.1 version even hard to understand. I tried to compile new versions, but none of those new versions boot.

 

Hi @Wernerthanks for the tip, but unfortunately the oldest version on github is 24.11 and they do not boot

[Werner]

https://debug.armbian.de for obtaining low level logs to debug further.