unable to get a working kernel with armbian build

[Fabricio Martínez Tamayo]

Hi,

 

I have attempted to boot with edge and current branches with no success. I am now trying vendor since its what its running.

 

My process is: 

 

./compile.sh BOARD=orangepi5pro BRANCH=current kernel-config

 

I enable tunneling GRE and some broadcom wifi drivers.

 

./compile.sh BOARD=orangepi5pro BRANCH=current kernel

 

sudo dpkg -i output/debs/linux-image-*.deb
sudo dpkg -i output/debs/linux-headers-*.deb
sudo dpkg -i output/debs/linux-dtb-*.deb

 

sudo reboot

 

and after this the system does not boot or post through HDMI.

 

I have to go back and erase /boot and restore a backup to be able to get it working again.

 

What am I missing?

 

P.S. I have /boot partition in SD card and the system partition is in an NVME drive.

Edited 2 hours ago by Fabricio Martínez Tamayo

[laibsch]

follow http://debug.armbian.de

[Igor]

1 hour ago, Fabricio Martínez Tamayo said:

does not boot or post through HDMI.

HDMI output might be broken on this kernel - mainline support is still fragile, perhaps for this board there is no device tree yet and it fails early.