Radxa Cubie A7A/A7Z - Allwinner a733

[humanus]

Of course, you can build an A7S image now as well. There's no display output yet. 

Edited Wednesday at 11:14 PM by humanus
Add detail

[qq20739111]

Thanks, I compiled one myself too, and it works fine. I actually thought Nick A said A7S support was only added in 6.18.

 

I also built a desktop version for A7S, but the GUI doesn't seem to start or work properly. 

Edited Thursday at 07:46 PM by qq20739111

[xuyitao]

https://github.com/alexcaoys/allwinner-bspThere are numerous issues with the NPU driver code in the repository, with almost all header files incorrectly set to "<>", resulting in compile time dependencies that cannot be found. I initially wanted to try modifying the makefile, but I found that the header file settings were very confusing, including mixing<>and "", incorrect header file paths, and a series of other problems. In the end, I gave up modifying the makefile and instead relied entirely on relative paths to locate header files, almost all of which needed to be modified.
However, it is reassuring that the repository has no other issues except for the header file error of the NPU code. Of course, it may be necessary to add a ** sunxi-autogen. h ** file to the include directory
The following is the NPU section that I have modified, completely by replacing and modifying the directory ../

npu.7z

[qq20739111]

@xuyitao  Did your build pass? Can the NPU handle Ollama?

[alexc]

Hi @xuyitao,

My repository is focused on moving toward a usable mainline kernel.

As of this week, there are no longer any dependencies on BSP NPU drivers. I plan to remove those, along with the BSP GPU drivers, to avoid any potential confusion.

Could you take a look at the mainline etnaviv driver? Hopefully it meets your needs.

[xuyitao]

@qq20739111 The compilation was successful, but ollama was unable to call NPU