Nerek Posted June 20, 2015 Share Posted June 20, 2015 Hi, I've installed Debian Wheezy with 4.0.5 kernel on my BPI and connected an 1To hd with sata. When i try to mount it, i get : "mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program" I can mount it on my other server ubuntu 14.04 LTS with no error. Do you have an idea why i can not mount it on BPI ? Maybe it's due to the Guid Partition Table ? Tks Nerek 1 Link to comment Share on other sites More sharing options...
Igor Posted June 20, 2015 Share Posted June 20, 2015 GPT is supported, that's not a problem. What do you have if you type: cat /proc/partitions Link to comment Share on other sites More sharing options...
Nerek Posted June 20, 2015 Author Share Posted June 20, 2015 Here's what i get : major minor #blocks name 179 0 7782400 mmcblk0 179 1 7781376 mmcblk0p1 8 0 976762584 sda 8 1 976760832 sda1 Link to comment Share on other sites More sharing options...
petrmaje Posted June 20, 2015 Share Posted June 20, 2015 I have the same problem with 4.0.5 kernel. Old kernel is ok, but there is another issue with wifi. After kernel upgrade my system hangs and when I booted from SD and try to mount SATA filesystem I got this: [ 1046.318010] ata1.00: configured for UDMA/133 (device error ignored) [ 1046.318062] ata1.00: device reported invalid CHS sector 0 [ 1046.318164] ata1: EH complete [ 1046.323039] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1046.323078] ata1.00: irq_stat 0x40000000 [ 1046.323109] ata1.00: failed command: FLUSH CACHE EXT [ 1046.323175] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3 res 61/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [ 1046.323211] ata1.00: status: { DRDY DF ERR } [ 1046.323236] ata1.00: error: { ABRT } [ 1046.327870] ata1.00: configured for UDMA/133 (device error ignored) [ 1046.327927] ata1.00: device reported invalid CHS sector 0 [ 1046.328085] blk_update_request: I/O error, dev sda, sector 0 [ 1046.328168] JBD2: recovery failed [ 1046.328209] EXT4-fs (sda1): error loading journal [ 1046.328221] ata1: EH complete root@lamobo:~# Link to comment Share on other sites More sharing options...
Nerek Posted June 20, 2015 Author Share Posted June 20, 2015 Ok, i manage to make it work. Neither "sudo mount /dev/sda1 /mnt' nor OpenMediaVault were working but "sudo mount -t ext4 /dev/sda1 /mnt" worked. Tks anyway for your help and for your release Link to comment Share on other sites More sharing options...
remsnet Posted June 20, 2015 Share Posted June 20, 2015 [ 1046.323236] ata1.00: error: { ABRT } [ 1046.327870] ata1.00: configured for UDMA/133 (device error ignored) [ 1046.327927] ata1.00: device reported invalid CHS sector 0 [ 1046.328085] blk_update_request: I/O error, dev sda, sector 0 [ 1046.328168] JBD2: recovery failed [ 1046.328209] EXT4-fs (sda1): error loading journal [ 1046.328221] ata1: EH complete root@lamobo:~#are you shure to have sufficentky provide power ? ssd can consume +1Amp while booting from it... i.e: banapi r1 = 1amp wifi another 1amp and the ssd aother 1amp .. at boot Link to comment Share on other sites More sharing options...
petrmaje Posted June 20, 2015 Share Posted June 20, 2015 [ 1046.323236] ata1.00: error: { ABRT } [ 1046.327870] ata1.00: configured for UDMA/133 (device error ignored) [ 1046.327927] ata1.00: device reported invalid CHS sector 0 [ 1046.328085] blk_update_request: I/O error, dev sda, sector 0 [ 1046.328168] JBD2: recovery failed [ 1046.328209] EXT4-fs (sda1): error loading journal [ 1046.328221] ata1: EH complete root@lamobo:~#are you shure to have sufficentky provide power ? ssd can consume +1Amp while booting from it... i.e: banapi r1 = 1amp wifi another 1amp and the ssd aother 1amp .. at boot When I use old kernel, SATA works without problems, wifi works too, but unstable. (Igor Pecovnik confirmed, that old kernel has the wifi issue). I have 3A power supply + usb power meter, peak current is ca 1,5A. I dont´t know, how SATA is powered, maybe there is possibility increase power software way, I don't know. Link to comment Share on other sites More sharing options...
remsnet Posted June 20, 2015 Share Posted June 20, 2015 When I use old kernel, SATA works without problems, wifi works too, but unstable. (Igor Pecovnik confirmed, that old kernel has the wifi issue). I have 3A power supply + usb power meter, peak current is ca 1,5A. I dont´t know, how SATA is powered, maybe there is possibility increase power software way, I don't know. i use igors lib to build my own fully patched kernels ... and that works fine. root@fw1 ~ # vgs VG #PV #LV #SN Attr VSize VFree fsys1 1 2 0 wz--n- 119,24g 81,54g root@fw1 ~ # lsmod Module Size Used by nfsd 245319 2 exportfs 3340 1 nfsd ax88179_178a 13488 0 usbnet 23171 1 ax88179_178a arc4 1598 2 rtl8192cu 90112 0 rtl_usb 11843 1 rtl8192cu rtl8192c_common 57293 1 rtl8192cu rtlwifi 81947 3 rtl_usb,rtl8192c_common,rtl8192cu mac80211 296619 3 rtl_usb,rtlwifi,rtl8192cu root@fw1 ~ # uname -a Linux fw1 3.19.3-rc5bpi #1 SMP Sun Feb 8 09:58:58 UTC 2015 armv7l GNU/Linux fw1 ~ # Today working on latest build 4.0.x .. :-) Link to comment Share on other sites More sharing options...
petrmaje Posted June 20, 2015 Share Posted June 20, 2015 i use igors lib to build my own fully patched kernels ... and that works fine. root@fw1 ~ # vgs VG #PV #LV #SN Attr VSize VFree fsys1 1 2 0 wz--n- 119,24g 81,54g root@fw1 ~ # lsmod Module Size Used by nfsd 245319 2 exportfs 3340 1 nfsd ax88179_178a 13488 0 usbnet 23171 1 ax88179_178a arc4 1598 2 rtl8192cu 90112 0 rtl_usb 11843 1 rtl8192cu rtl8192c_common 57293 1 rtl8192cu rtlwifi 81947 3 rtl_usb,rtl8192c_common,rtl8192cu mac80211 296619 3 rtl_usb,rtlwifi,rtl8192cu root@fw1 ~ # uname -a Linux fw1 3.19.3-rc5bpi #1 SMP Sun Feb 8 09:58:58 UTC 2015 armv7l GNU/Linux fw1 ~ # Today working on latest build 4.0.x .. :-) And the question is..... :-) Is it possible to download yours kernel somewhere? Link to comment Share on other sites More sharing options...
remsnet Posted June 20, 2015 Share Posted June 20, 2015 And the question is..... :-) Is it possible to download yours kernel somewhere? i can put that on my dropbox once tested. currently compiling an full moduarised kernel ON the R1 - no crosscompile - using the ssd as compile storage. Link to comment Share on other sites More sharing options...
petrmaje Posted June 20, 2015 Share Posted June 20, 2015 i can put that on my dropbox once tested. currently compiling an full moduarised kernel ON the R1 - no crosscompile - using the ssd as compile storage. So happy compiling :-) Let me know pls., when your kernel will be ready :-) Thanks!!!! Link to comment Share on other sites More sharing options...
remsnet Posted June 20, 2015 Share Posted June 20, 2015 that will take some time days to get an sufficent MODED kernel .config that lets build , compile errors will reported to igors Lib as allways. Link to comment Share on other sites More sharing options...
Recommended Posts