August 20Aug 20 I wanted to mention that i got the realtek changes of the kernel 3.10.x extracted and applied to more recent kernel versions with the help of AI. So far i only took care of RTD1195 SoC as i only have a QNAP TS-228 to play around. I tried to document most important stuff at https://en.opensuse.org/HCL:TS228#Kernel_6.12.100_with_modified_Realtek_changes Keep in mind the RTD1195 is a 32bit only SoC. I am currently looking to get my fingers on a QNAP TS-230 which would be the SoC of this thread but it might take quiet some time as i don't want to spend too much money on a device i only want to play around But probably somebody else feels now enlighten to also play around. A good starting point should be https://github.com/TS-228/linux/commit/908d9265c02e88c0d2b9697747cae4781e9d3f2b as that is before the cleanup. Edited August 20Aug 20 by TuningYourCode some wording fixes
Wednesday at 02:45 PM3 days Hi @Igor Thank you for build this Realtek support up.I know you have better thing to do (and also know this topic is not supported), but if you have some "bored time", could you please give some adivce how to implement the new u-boot and kernel for the LakeI box?Far as I understand the image (example BPI W2) is prepared for SD card boot using the SPI. It is possible somehow start the newly build u-boot (2026.10) from the vendor u-boot?
Thursday at 06:57 AM2 days 15 hours ago, kisgezenguz said:could you please give some adivce how to implement the new u-boot and kernel for the LakeI box?I am not familiar with Lakel Box. General requirements to make it possible and to squeeze months into weeks:- schematics- hardware- serial console- vendor provided uboot and kernel sources- Claude Max account or higher- a week(s) of boredom- SD card emulator- experiences- other's people / similar board attemptsW2 still uses binary blobs for bringing the SoC up. Cracking that we are looking at several weeks with uncertain outcome. Chain booting modern u-boot from factory uboot is usually possible and is considered more as a workaround when assembling a complete (u)boot flow is not possible, when boot process is undocumented / hidden, pack into binary blobs.Sadly I am busy for next couple of months.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.