SBC News

We’ve written about Xilinx Zynq UltraScale+ MPSoCs that combine Arm Cortex-A53/R5 cores and Mali-400 GPU with Ultrascale FPGA fabric several times over the course of a few years. But AMD-Xilinx also offers the Zynq UltraScale+ RFSoC single-chip adaptable radio platforms that support up to 7.125GHz analog bandwidth. The topic came to my attention because of an upcoming ZU49DR SoM from iWave Systems that seems to be under development but also noticed Avnet had launched a solution last year with the XRF16 Gen3 SoM featuring the same third-generation Zynq Ultrascale+ ZU49DR RFSoC with 16 RF-ADC, 16 RF-DAC channels, and 6GHz RF bandwidth. Avnet XRF16 specifications: Main chip …

Winlink E850-96Board is a 96Boards CE Extended-compliant single board computer (SBC) based on a Samsung Exynos 850 octa-core Cortex-A55 processor plus 64GB flash and 4GB RAM found in a single eMCP (embedded Multi-Chip Package) chip. While the Samsung Exynos 5422 based ODROID-XU4/XU4Q was one of the most popular SBCs when it launched in 2015 thanks to its features set and affordable pricing, we haven’t really seen other interesting Samsung Exynos SBCs in recent years. I did notice a Winlink E850-96Board based on Exynos 850 in the Linux 5.17 release last March, but there was not enough information then. The good news is that the board has now launched so let’s have a closer…

Description The Orange Pi Zero 3 board was recently added as a WIP configuration, and through testing it was determined that the CPU frequency configuration was not working for this board, but was working correctly for the Orange Pi Zero 2. Further investigation determined that the h618 CPU (which differs from the Zero 2 h616) was not in the allow list in the CPU frequency kernel driver. This PR updates both the current and edge sunxi kernel configurations with a patch that enables the h618 device in the configuration whitelist. The goal of this patch was to make the smallest change possible change to the driver code to enable the capability for the Zero 3. In the code, …

Dear Armbian Community, Welcome to the latest edition of our Newsletter! We have some exciting updates and important information to share with you. Let’s dive right in! Release Update: We are constantly pushing the boundaries to deliver the best experience for our users. While we strive to test everything thoroughly, bugs always slips through. However, we want to assure you that each release comes with a lot of fixes. We are currently focused on addressing the troubles with the upcoming release. Although a few images may not boot, we are overall satisfied with the progress. We have fixed images that didn’t boot and we decided to hold back the repository update for now. …

Description Most of Realtek drivers have a bug: P2P IE not passed to AP beacon. This causes problems, when P2P-GO looks like a regular AP. All P2P capable devices can't see my P2P-GO in the list. I found a driver where P2P-GO works fine (according to user reviews): https://github.com/aircrack-ng/rtl8812au And found these differences. After I backported these changes my P2P-GO works fine. Also this changes is totally safe, because affects only P2P-related code This patch contains my patches to the original driver repo: jwrdegoede/rtl8189ES_linux#87 jwrdegoede/rtl8189ES_linux#88 But the owner is too busy to review that :( How Has This Been Tested? Create /etc/wpa_su…

debian: add Trixie (Debian 13, testing) csc target & build host debian: add Trixie (Debian 13, testing) csc target & build host Trixie, like Bookworm and Sid, does not have python2 anymore View the full article

Description Add support for a rk3568 based SBC Lubancat2 in my hand. The u-boot and linux kernel support is landing mainline for a few months. How Has This Been Tested? Test: ./compile.sh build BOARD=lubancat2 BRANCH=edge BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=xfce DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DOWNLOAD_MIRROR=bfsu ENABLE_EXTENSIONS=mesa-vpu EXPERT=yes EXTRAWIFI=no KERNEL_CONFIGURE=no PREFER_DOCKER=no RELEASE=noble VENDOR=Armbian Write the image to tf card, insert the card to the board, the board can boot into desktop…

Description Helping @alexl83 with his OrangePi 5 Plus 😄 Support for this board with SPI image was added to U-Boot this january: https://github.com/u-boot/u-boot/commit/7c084fd51c0c52b24facdbcfeeaf2c70fba03406 Also add the latest DDR and BL31 blobs, this should fix issues like recently on the NanoPC T6. Marked as WIP to give room for testing. How Has This Been Tested? [x] Build success: ./compile.sh BOARD=orangepi5-plus BRANCH=edge RELEASE=trixie EXPERT=yes KERNEL_CONFIGURE=no BUILD_MINIMAL=no BUILD_DESKTOP=no uboot [ ] @alexl83 please test freshly built edge kernel image [ ] @alexl83 please test freshly built vendor kernel image (vendor u-boot should be applied) [ ] …

ITEAD has introduced the SONOFF NSPanel Pro Smart Home control panel running Android 8.1 on a Rockchip PX30 quad-core Cortex-A35 processor and acting as a Smart Home gateway thanks to an 802.15.4 radio for Zigbee 3.0, and 2.4 GHz 802.11b WiFi for connectivity. The NSPanel Pro follows the ESP32-powered SONOFF NSPanel introduced just last year but offers much more flexibility with Android, 2GB RAM, 8GB eMMC flash, and also offers a slightly larger 3.95-inch capacitive touchscreen display with 480×480 resolution. SONOFF NSPanel Pro specifications: SoC – Rockchip PX30 quad-core Cortex-A35 processor with Arm Mali-G31 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC 5.1 flash Di…

SiFive has announced two new RISC-V Performance cores with the P670 and P470 processors with RISC-V Vector Extension for AI/ML, media and sensor processing, and designed for high volume applications such as wearables, smart home, industrial automation, AR/VR, and other consumer devices. The P670 is comparable to the Cortex-A78, and the P470 is comparable to the Cortex-A55. Both support the standardized RISC-V RVA22 profile for better OS compatibility and implement RISC-V Vector v1.0 and Vector Cryptography extensions. The SiFive Performance P470 and P670 share the following features: Full RISC-V RVA22 profile compliance Full, Out-of-Order, RISC-V Vector implementation, ba…

MaxLinear has unveiled its first Wi-Fi 7 SoCs with the MxL31712 and the MxL31708 single-chip solutions targeting service provider gateways, Wi-Fi routers, and access points, and delivering more than 70% higher tri-band throughput compared to Wi-Fi 6. The MxL31712 aims at the premium 4×4 tri-band market with a throughput of up to 18.6 Gbps and up to 12 spatial streams, while the MxL31708 will be integrated into mid- to high-range 4×4 dual-band access points and gateways with a throughput of up to 17 Gbps, and up to 8 spatial streams. MaxLinear MxL31712 and MxL31708 share the following features: Single-chip WFA Wi-Fi 7 R1 certifiable Based on IEEE 802.11be (aka WiFi 7 or …

I’ve previously reviewed Weibu’s N10 mini PC, however, they have now extended the range of CPUs available to the N10 through the addition of Alder Lake processors. As a reminder, Weibu is a B2B company that offers total solutions and OEM/ODM services and they don’t sell directly to end users as their target clients are computer manufacturers like Acer and Hisense. Weibu have sent a pre-production sample of their latest N10 based on a Core i3-N305 Alder Lake N-Series processor to showcase its capabilities in this review. I will revisit the specification of the N10 and briefly look at the performance running both Windows 11 Pro and Ubuntu 22.04. Weibu N10 product specificat…

The “Auspicious Machine” may look like a Blackberry phone, but it’s actually a handheld Linux PC with a built-in QWERTY keyboard and a 3.5-inch display that can be powered by a range of system-on-modules (SoM). The computer, whose name can also be translated as the “Auspicious Phone”, can be used as a Linux terminal with GPIO control, and for gaming with Linux distributions such as Batotera or RetroBat with the D-Pad and ABXY buttons found on the device. Auspicious Machine specifications: Supported SoMs Bigtreetech CB1 with Allwinner H616 quad-core Cortex-A53 processor and 1GB DDR4 Raspberry Pi CM4 with Broadcom BCM2711 quad-core Cortex-A73 processor, up to 8GB LPDDR4, …

Radxa ROCK5 Model B (aka ROCK 5B) is one of the most anticipated Rockchip RK3588 single board computers due to its features set and relatively affordable price. It was first showcased in January, but it’s taking a while as the Cortex-A76/A55 SoC is a complex beast. The good news is that the public launch is getting closer as Radxa sent “developer edition” samples to developers and enthusiasts for a “debug party”. I was one of the recipients so, in this post, I’ll have a closer look at the latest revision of the board, and give it a quick try first before going into more details in the second of this preview. ROCK5 Model B unboxing I received the 16GB RAM version which sho…

The Arylic S50 Pro+ is an audio streamer with a built-in preamp. It can be connected to various wireless networks such as WiFi and Bluetooth (with aptX HD audio support), and wired connections namely analog RCA Line In/Out, Digital Optical In/Out, Coaxial Out, Subwoofer Out, RJ45 LAN port, and a USB host port. To use the S50 Pro+, simply connect the output cable to the power amplifier ​​and a stereo speaker system. It allows you to stream music from streaming services like Spotify, Tidal, or Qobuz in high definition through the 4STREAM app or other compatible apps. It’s also possible to add multiple S50 Pro+ to your home audio system for support for multiple rooms and/or …

Bump oras-project/oras from 0.16.0 to 1.2.0 by bumping ORAS_VERSION in lib/functions/general/oci-oras.sh. Release notes Sourced from oras-project/oras's releases. Please note that this only shows the release notes for the latest release. New Features oras is compliant with OCI image-spec v1.1.0 and distribution-spec v1.1.0 Introduce brand-new default terminal experience Show live progress for the following commands: oras copy oras pull oras push oras attach oras blob fetch oras blob push The new terminal experience can be turned off via the preview flag --no-tty Support deletion of manifests and blobs in OCI image layout Support X.509 mTLS authentication with O…

Description Enable INNOLUX_AFJ101_BA2131 panel on rk3588 legacy kernel Jira reference number [AR-9999] How Has This Been Tested? [x] Build kernel Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

myCobot 280 Pi is a versatile robotic arm with a 6 degree of freedom design. It was developed by Elephant Robotics using the Raspberry Pi 4 board as the main controller. The robot is compact and delivers stable operation making it ideal for confined spaces. It can also be programmed in a variety of languages, is easy to use, and offers a lot of features. It is suitable for those who are interested in learning how to program a robotic arm controller and for engineering projects. Unboxing myCobot 280 Pi The myCobot 280 Pi arm has a working range of 280 mm, weighs 850 grams, and can handle a payload of up to 250 grams. It is powered by 6 servo motors, one for each degree of …

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

The latest 6.11 kernel release is here! This release improves performance, security, and hardware compatibility, increasing the kernel's flexibility and efficiency for various computing environments. View the full article

Sipeed has launched the Lichee RV Dock Pro kit for the company’s Lichee RV Allwinner D1 RISC-V module that builds on the earlier Lichee RV Dock carrier board and adds a MIPI/RGB LCD connector, two built-in microphones, as well as an on-board JTAG+UART debugger based on Bouffalo Lab BL702 microcontroller. Lichee RV Dock Pro specifications (preliminary): Supported system-on-module (SoM) – Lichee RV module with Allwinner D1 RISC-V processor @ 1 GHz, 512MB DDR3, MicroSD card slot, and USB Type-C OTG port Storage – Optional SPI flash Display interfaces HDMI port up to 4Kp30 MIPI LCD/RGB interface for up to 720p30 display Audio – 3W power amplifier, 2x analog microphone, suppor…

Google released the first Android 13 Developer preview in February, and we know quite a lot about Android 13 including virtualization support, as well as security and privacy updates. But the company has now released Android 13 Beta for TV (aka Android 13 for Android TV) for Google ADT-3 developer kit and the Android Emulator for TV in Android Studio. The beta release allows app developers to test their apps and provide feedback on the latest release before it is released to customer devices. Google does not provide any changelog specific to Android 13 for Android TV, but you’ll find the OS image for ADT-3 and installation instructions on the release page. Mishaal Rahman …

Description bump rockchip-rk3588-edge to 6.4 add preliminary device tree for nanopc-t6 (not yet working) adopt new dts/overlay structure for rockchip-rk3588-edge How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. builds, no boards have booted with edge kernel here so far Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dep…

Google is allegedly about to release the ADT-4 hybrid developer kit for Android TV based on Amlogic S905X4 processor with AV1 video support, as well as ATSC 3.0 and DVB-S2 tuner. Launched in January 2020, the Google ADT-3 developer box allows developers to test their app on the latest version of the Android TV OS as soon as it is released. But 9to5Google reports the devkit has been out of stock for several months, will be deprecated, and they’ve read some documentation about an ADT-4 Hybrid Developer Kit that should replace it by the end of the year or early next year with digital TV tuners. The documentation is private/confidential, but 9to5Google says the device looks t…

We’ve previously covered the EdgeBox-RPi4 industrial controller powered by a Raspberry Pi Compute Module 4 and plenty of I/Os such as RS485, RS232, digital inputs and outputs, and connectivity options such as Gigabit Ethernet, WiFi 5, Bluetooth 5, and 4G LTE. But if you don’t quite need the power of a Linux controller, the EdgeBox-ESP-100 industrial edge controller based on an ESP32-S3 dual-core WiFi and Bluetooth microcontroller and offering a similar set of features, albeit with twists, may be an interesting option. EdgeBox-ESP-100 specifications: Microcontroller – Espressif Systems ESP32-S3 dual-core Tensilica LX7 microcontroller @ 240 MHz with AI vector instructions, …

While it may be hard to buy a Raspberry Pi these days, there are various alternatives with the Raspberry Pi 3/4 form factor, including Pine64’s Quartz64 Model B SBC powered by a Rockchip RK3566 processor that has just launched for $59.99 with 4GB RAM. The Quartz64 Model B is a smaller version of the Quartz64 Model A launched earlier this year, that comes with HDMI 2.0a and MIPI DSI display interfaces, a MIPI CSI camera interface, Gigabit Ethernet, WiFi 5 and Bluetooth 5.0, as well as several USB 2.0/3.0 ports, and of course, a 40-pin Raspberry Pi compatible GPIO header. Quartz64 Model B specifications: SoC – Rockchip RK3566 quad-core Cortex-A55 processor up to 1.8 GHz wit…

Sipeed Maix-III development kit is composed of a core board equipped with AXERA AX620A AI processor and a carrier board exposing several interfaces such as Ethernet, USB, and camera connectors. resources. As noted in our earlier article about the AXERA AX620A chip, it is a quad-core Arm Cortex-A7 chip with an NPU offering a maximum of 14.4 TOPS @ INT4 or 3.6TOPSs @ INT8, and as such, this development board mainly targets AI vision applications. The board is an upgrade to the earlier Speed Maix II with an Allwinner V831 processor. Thanks to the low power consumption of the AXERA AX620A SoC, the Sipeed Maix-III board can be powered directly through its USB port as the syst…

Raspberry Pi Trading has just launched the 1.6MP Raspberry Pi Global Shutter Camera which can capture rapid motion without introducing artifacts usually experienced with rolling shutter cameras such as the earlier Raspberry Pi Camera modules, including the latest Raspberry Pi Camera Module 3. The company sent me Raspberry Pi Global Shutter Camera sample together with a 16mm C-mount lens for review, and I’ll report my experience after going through the specifications of the new camera. Raspberry Pi Global Shutter Camera specifications Sony IMX296LQR-C Sensor Resolution: 1.58 megapixels (color) Sensor size: 6.3mm sensor diagonal Pixel size: 3.45μm x 3.45μm Output – RAW10 Ba…

Description Update edge kernel to 6.11 Add Hantro VPU decoder back (H264 is not enabled) Refresh HDMI TX and RX patches from Collabora tree Disable HDMI-RX on OPi5+ by default and add an overlay in order to avoid interrupts Use green led as heartbeat in Orange Pi 5 Plus To Do [ ] Crypto, RNG and some other nodes seem to have been removed during rewrites. I will add them back. [ ] USB-C doesn't work on both boards as far as i've tested. This needs to be checked. GitHub issue reference: Jira reference number [AR-9999] How Has This Been Tested? [x] Orange Pi 5 Plus and Khadas Edge 2 boots. [x] HDMI works up to 1080p@120fps [ ] Tests with more boards. Checklist: Please…

Description This PR adds support for the Texas Instruments SK-AM68 and SK-AM69 boards. Notable features of SK-AM68 board: 16GB LPDDR4‐4266 with support for inline error correction code (ECC) DisplayPort 4K resolution with MST support and HDMI Two CSI-2 ports compatible with Raspberry Pi 8 TOPS deep-learning performance and hardware-accelerated edge AI Three USB 3.0 Type A ports, one USB 3.0 Type C port Gigabit Ethernet and 4x CAN-FD Headers One M.2 key M connector Notable features of SK-AM69 board: 32GB LPDDR4‐4266 with support for inline error correction code (ECC) DisplayPort 4K resolution with MST support and HDMI Three CSI-2 ports compatible with Raspberry Pi 32…

rock-5b: add initial radxa rock-5b .wip (by @amazingfate); vendor u-boot & vendor kernel .wip board using BOARDFAMILY rk35xx, which was for rock-3a legacy with Radxa's 5.10 kernel which is Rockchip's 5.10 with half-of Android 12's 5.10-lts 💩 CONFIG_VT=y & SKIP_BOOTSPLASH=yes patch by @piter75 in uboot for working 'source' command so boot.scr can be used, and not extlinux rock5 add kernel optiions by @lanefu Originally by @amazingfate I just gathered the stuff and built images. Since I don't have the board, I'm PR'ing draft so you all can build and tweak. No BOARFAMILY was really adequate, rk35xx was only for rock-3a in the same situation, so lesser of evils may…

Description Mainline kernel linux-6.7.y has broken dsi panel since 6.7.6, so we use back v6.7.5 avoid it. Other sm8250 device xiaomi 10 doesn't support panel in kernel so it should be fine. Use typec pd patch from lujianhua and now the typec port can auto switch to host mode when usb deivices are plugged in. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=sm8250 DEB_COMPRESS=xz KERNEL_GIT=shallow DEB_COMPRESS=xz [x] Xiaomi pad5 pro works fine. Checklist: [x] My code follows the style guidelines of this project […

Bumps crazy-max/ghaction-import-gpg from 3 to 5. Release notes Sourced from crazy-max/ghaction-import-gpg's releases. v5.0.0 Node 16 as default runtime (#136) This requires a minimum Actions Runner version of v2.285.0, which is by default available in GHES 3.4 or later. v4.4.0 Use eslint prettier plugin (#132) Bump openpgp from 5.2.0 to 5.2.1 (#131) Bump minimist from 1.2.5 to 1.2.6 (#134) Bump @​actions/exec from 1.1.0 to 1.1.1 (#133) v4.3.0 Update dev dependencies and workflow (#130) Fix error deleting keys with short key id (#129) Bump openpgp from 5.1.0 to 5.2.0 (#128) v4.2.0 Align default ttl with GitHub job run timeout (#126) Delete key using primary k…

STMicro VL53L8 multi-zone direct Time-of-Flight (dToF) sensor doubles the ranging performance of VL53L5 sensor – up to 4 meters – or reduces the power consumption by half when operating in common conditions. STMicro ToF sensors are some of the most popular devices to accurately measure distance in real-time, and the earlier VL53L0X and VL53L1X sensors integrated a single photon avalanche diode. STMicro VL53L5 changed that with multi-zone support (up to 64 zones), and VL53L8 FlightSense sensor builds on the solution with improvements in terms of range and efficiency. STMicro VL53L8 ToF sensor specifications: Low-power 32-bit microcontroller running the firmware 940 nm invi…

AFBC support has been merged to PanVK and will be available in the Mesa 25.3 release! This new enablement reduces memory bandwidth and boosts performance. View the full article

Elecrow CrowPi L is an 11.6-inch laptop shell based on Raspberry Pi 4 designed for STEM education with optional electronics modules and tutorials. That’s an evolution of the CrowPi 2 laptop I reviewed in 2020 with a thinner design and more flexible since the electronics modules are optional, so it can serve the market of people just wanting a Raspberry Pi 4 laptop. The company has sent me a full “CrowPi L Advanced Kit” for review with the CrowPi L laptop fitted with a Raspberry Pi 4, as well as the Crowtail Starter Kit for Raspberry Pi. CrowPi L Advanced Kit Unboxing Let’s check out the laptop package first. Since in this design, the laptop comes with a battery, and mine …

AAEON UP Squared Pro 7000 is an upcoming single board computer (SBC) based on a choice of Alder Lake-N SoCs up to the Core i3-N305 octa-core processor, up to 16GB LPDDR5 RAM, and 64GB eMMC flash. The board supports up to three displays and comes with a MIPI CSI port, dual 2.5GbE networking, three USB 3.2 ports, two RS232/RS422/RS485 interfaces, as well as several M.2 sockets for storage and wireless expansion that makes it suitable for machine vision solutions for smart factories and robotics applications. UP Squared Pro 7000 specifications: Alder Lake-N SoC (one or the other) Intel Core i3-N305 octa-core processor up to 3.8 GHz with 6MB cache, 32EU Intel UHD Graphics Gen…

Last summer, Canaan introduced the Kendryte K510 tri-core RISC-V AI processor, now also known as Canaan K510, as an updated version of the Kendryte K210 with a much higher 3 TOPS of performance, but at the time, there were no development board and SDK. But I’ve now just been informed of the availability of the Canaan Kendryte K510 CRB (customer reference platform) AI development kit with camera module and LCD display, as well as a software development kit with U-Boot, Linux, and AI tools which can be used to develop smart audio and computer vision applications. Kendryte K510 CRB-Kit development kit specifications: SoC – Canaan Kendryte K510 dual-core RISC-V64 CPU up to 80…

Based on the works done by @lanefu for the same RK3568 NanoPi R5S, with ethernet interface name updated and corresponding LED dtb overlay. Tested with a local built Armbian-unofficial_24.2.0-trunk_Nanopi-r5c_bookworm_edge_6.6.4_minimal.img on my NanoPi R5C: [✔️] Boot with SD card. [✔️] Install into eMMC and boot from eMMC. [✔️] LAN / WAN interface renamed and corresponding LEDs work with link status change. View the full article

In the first part of Khadas VIM4 review, I showed off the Amlogic A311D2 SBC and some accessories such as the DIY case and M2X expansion board to add M.2 SSD and modem and tried out OOWOW cloud services to install Ubuntu 20.04 server. I’ve now just gotten Fiber Internet at home, so it’s much more practical to test the system, and in the second part of the review, I’ve installed Android 11 on the VIM4 board, checked out settings and system info, and ran some benchmarks. It will be more like a preview since Android 11 is not a consumer-friendly system at this time, and is more designed for people wanting to build their own applications. Installing Android 11 on Khadas VIM4…

Kubuntu Focus NX is a mini PC running Kubuntu Focus Linux operating system on an Intel Core i5-1135G7 or i7-1165G7 Tiger Lake processor, with up to 64GB RAM, support for NVMe and SATA storage, offering four HDMI/DisplayPort video outputs, two Thunderbolt 3 / USB-C ports, and three extra USB 3.2 Type-A ports. The mini PC also comes with decent networking and wireless connectivity thanks to a 2.5GbE port and an Intel AX601 module enabling WiFi 6 and Bluetooth 5.2. Mini PCs shipping with Linux by default are quite rare, and most that do are fairly expensive ones, so it’s nice to see a more affordable mid-range mini PC working with Kubuntu Focus out of the box. Kubuntu Focus …

The Rockchip RK3568-powered NanoPi R5S SBC with two 2.5GbE ports, one Gigabit Ethernet port, and M.2 NVMe storage is now available for $59, or $75 with a metal enclosure. As previously mentioned, the mini router board is equipped with 2GB RAM, 8GB eMMC flash, two USB 3.0 ports, as well as an HDMI output for people wanting to make use of the Rockchip RK3568 processor’s multimedia capabilities, or simply have a user interface on a monitor. NanoPi R5S specifications: SoC – Rockchip RK3568 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 MP2 GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoder, 1080p60 H.264/H.265 video encoder System Memory – 2GB…

http://blog.armbian.com/content/images/2026/01/T6-Plus-01.pngThe NanoPC T6 Plus, powered by the performance-optimized Armbian OS, is your ticket to a truly professional, high-speed edge computing experience. This industrial-grade device is built around the flagship Octa-core Rockchip RK3588 SoC and now features a massive upgrade to LPDDR5 RAM (up to 32GB), giving it the muscle to handle heavy virtualization, 8K media, and AI workloads effortlessly. Its core hardware is ideal for power users and enterprise integration. The dual 2.5GbE Ethernet ports ensure you can maximize the speed of high-bandwidth wired connections, while multiple M.2 slots (M-Key for NVMe and E-Key fo…

Description Rock 5c has an on board aic8800 usb wifi module, which need dkms packages from https://github.com/radxa-pkg/aic8800. Add an extension to preinstall these packages to image. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh build BOARD=rock-5c BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow RELEASE=bookworm. Build log: https://paste.armbian.com/jabulawezu [ ] I don't have rock 5c at my hand to test, I will share my built images to my friends to test. Checklist: Please delete option…

URVE Board Pi is a single board computer (SBC) powered by a Rockchip RK3566 quad-core Cortex-A53 processor, 2GB RAM, 8GB eMMC flash, plus the same interfaces as the Raspberry Pi 3 Model B as well as an RTC with a coin-cell battery and an M.2 SSD socket. More specifically, the Rockchip RK3566 board comes with a 4Kp60 capable HDMI 2.0 port, a MIPI DSI/LVDS display interface, a MIPI CSI camera connector, Gigabit Ethernet, four USB 3.0/2.0 ports, a dual-band WiFi 5.0 and Bluetooth 4.2 wireless module, and the usual 40-pin GPIO header. URVE Board Pi specifications: SoC – Rockchip RK3566 Quad Core Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 GPU, 0.8 TOPS NPU System Memory…

In researching a post in the forums, I found that the meson64-edge kernel config doesn't include rtl8822cs (which apparently some TV boxes use). This is enabled in most kernel configs: linux-bcm2711-current.config:CONFIG_RTL8822CS=m linux-bcm2711-edge.config:CONFIG_RTL8822CS=m linux-imx6-current.config:CONFIG_RTL8822CS=m linux-imx6-edge.config:CONFIG_RTL8822CS=m linux-media-current.config:CONFIG_RTL8822CS=m linux-media-edge.config:CONFIG_RTL8822CS=m linux-media-legacy.config:# CONFIG_RTL8822CS is not set linux-meson64-current.config:CONFIG_RTL8822CS=m linux-meson64-edge.config:# CONFIG_RTL8822CS is not set linux-mvebu64-current.config:CONFIG_RTL8822CS=m linux-mvebu64-edg…

NVIDIA Jetson Orin Nano Developer Kit is an upgrade to the popular Jetson Nano Developer Kit that delivers 80 times the performance, up to 50 times the performance per watt, and gives the developers the ability to design entry-level AI-powered robots, smart drones, intelligent vision systems, and more. The Jetson Orin Nano has a similar form factor as the original Jetson Nano, but is fitted with a Jetson Orin Nano 8GB module with up to 40 TOPS AI performance, and is equipped with a DisplayPort video output, USB 3.2 Gen 2 ports, two M.2 Key M sockets for SSDs, Gigabit Ethernet, a pre-installed Wi-Fi module, and connectors for cameras. NVIDIA Jetson Orin Nano Developer Kit …

Qualcomm QCX216 is a new IoT-optimized LTE Cat1 bis modem with a data rate of up to 10 Mbps at ultra-low power and support for WiFi-based terrestrial positioning thanks to the company’s database of billions of geolocated beacons. LTE Cat1 bis is an update to LTE Cat1 that does not require software and hardware upgrades to the base stations, enables smaller, simpler, and cheaper designs with a single antenna, and delivers higher speeds than LTE Cat M1 typically used in IoT applications. Qualcomm QCX216 LTE IoT modem will be used in smart utility meters, trackers, e-mobility solutions, parking meters, home automation and security equipment, and other location-based solution…

Dear Armbian community, We’re excited to announce the latest Armbian release,24.2, codename: Kereru! This update comes with a plethora of changes, making the Armbian experience even better. Highlights of Completed Actions Closed Projects In recent developments, we’re proud to announce the completion of several projects geared towards refining the Armbian experience. Notably, we’ve resolved DNS resolution issues associated with Debian Bookworm, ensuring smoother connectivity for users. Furthermore, our team has optimized the performance of HDMI consoles on Khadas VIM1S and VIM4 devices, alleviating previous sluggishness. Additionally, we’ve successfully t…

LILYGO must be churning out at least one new “ESP32” board every month, but I don’t think they’ve ever made one with ESP32-S3. LILYGO T-QT V1.1 board changes that and combines the dual-core WiFi 4 and Bluetooth LE 5.0 AI microcontroller with a 0.85-inch color display. The board also happens to be rather small and cute with a 33 x 18 mm form factor, offers some I/O via headers and a 4-pin connector, and can be powered via its USB Type-C port or a battery, but lacks a charging circuit. LILYGO T-QT V1.1 specifications: Wireless MCU – Espressif Systems ESP32-S3 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, 512KB RAM, wireless connectivi…

Dear Armbian Community, We are thrilled to announce Armbian Release 24.11.1, packed with significant updates across our entire ecosystem! These updates are aimed at enhancing functionality, expanding hardware support, and refining the user experience for both developers and everyday SBC users. Let’s dive into the exciting new features! Core system updates Armbian Build Framework The updated build system introduces new tools for faster builds and seamless integration. Optimized compilation workflows and prebuilt configurations make deploying custom firmware easier and more efficient, especially for developers focusing on specialized projects. Armbian Config Utility …

OnLogic Helix 401 is a fanless industrial computer with a compact design powered by a choice of Alder Lake Embedded processors from Celeron 7305E to Core i7-1270PE designed for edge computing, Industry 4.0, Internet of Things (IoT), and more. The computer supports up to 64GB DDR5 memory, SATA or NVMe storage via two M.2 sockets, and offers up to four video outputs via DisplayPort and USB4 ports, dual Gigabit Ethernet, optional WiFi and/or 4G or 5G cellular connectivity, COM and CAN bus ports, and Digital Input/Output (DIO) connector. OnLogic Helix 401 (HX401) specifications: Alder Lake SoC Intel Celeron 7305E penta-core processor @ 3.10GHz / 4.20GHz (Turbo) with 48EU Inte…

Weston 15.0 has arrived, bringing a brand new Lua-based shell for fully customizable window management, an experimental Vulkan renderer, and a host of improvements to color handling, media playback, and display performance. View the full article

QuickSpot Walter is an ESP32-S3 development board with built-in WiFi 4 and Bluetooth LE/Mesh connectivity, as well as NB-IoT, LTE-M, and GNSS support through a Sequans GM02SP 5G IoT modem that appears to be a variant of the Sequans Monarch 2 GM02S with GNSS support. Walter specifications: Wireless modules ESP32-S3-WROOM-1-N16R2 module ESP32-S3 dual-core LX7 microcontroller 2MB QSPI PSRAM 16MB QSPI flash 802.11 b/g/n WiFi 4 up to 150 Mbps with on-board antenna Bluetooth 5 LE up to 2Mbps, Bluetooth Mesh Sequans GM02SP modem LTE Cat M1 (LTE-M) and NB1/NB2 (NB-IoT) GNSS and assisted GNSS using GPS and Galileo constellations NanoSIM for cellular connectivity I/Os 2x 14-pin he…

FHDM TECH DSO-500K is a 2-channel 500kS/s WiFi oscilloscope based on Raspberry Pi Pico W board that can also work over USB, and offers an analog bandwidth of up to 150kHz. We previously had seen the Raspberry Pi Pico board used as a logic analyzer, so it should come as no surprise that somebody has also come up with a Raspberry Pi Pico W-based oscilloscope that enabled visualization on Android over WiFi or USB. DSO-500K specifications and features (through the Scoppy app): MCU board – Raspberry Pi Pico W board with RP2040 dual-core Cortex-M0+ microcontroller, 2MB SPI flash, WiFi 4 and Bluetooth connectivity Sample rate – Up to 500kS/s sample rate (250kS/s with both channe…

As expected, Sipeed has now launched the Sipeed M0S IoT module based on Bouffalo Lab BL616 RISC-V microcontroller with 2.4 GHz WiFi 6, BLE 5.2, and Zigbee connectivity along with the “Sipeed M0S Dock” development board. The M0S is a tiny module (11×10 mm) with a 320 MHz wireless MCU, a ceramic antenna, and castellated holes for I/Os, and the Sipeed M0S Dock places the module on an easy-to-use board with a USB Type-C port, a BOOT button, and a 12-pin 2.54mm pitch header. Sipeed M0S module specifications: MCU – Bouffalo Lab BL616 32-bit RISC-V (RV32IMAFCP) microcontroller @ up to 320 MHz (384 MHz overclocked) with 480KB SRAM, 4MB flash, 2.4 GHz WiFi 6, Bluetooth 5.2 dual m…

NVIDIA Jetson Orin Nano system-on-module (SoM) is an update to the Jetson Nano entry-level Edge AI and robotics module that delivers up to 40 TOPS of AI performance, meaning it’s up to 80 times faster than the original module. The new SoM features an hexa-core Arm Cortex-A78AE processor, an up to 1024-core NVIDIA Ampere architecture GPU with 32 Tensor cores, up to 8GB RAM, and the same 260-pin SO-DIMM connector found in the Jetson Orin NX modules. Two versions are offered with the following specifications: That means the Jetson Orin family has now six modules ranging from 20 TOPS to 275 TOPS. There’s no specific development kit for the Jetson Orin Nano SoM since it can be…

Maxtang ALN-10 is an upcoming mini-ITX motherboard based on Alder Lake-N processors from the Processor N50 up to the Core i3-N305 SoC and specifically targetting industrial applications with a -20 to +60°C temperature range, six RS232/RS485 serial ports, and 12V to 19V DC input among other features. Since the latest Alder Lake N-Series processors were announced, we’ve seen a range of mini PCs based on the new series, some laptops, as well as a camera devkit and one single board computer, but so far no actual motherboards. Maxtang ALN-10 changes that with the industrial mini-ITX motherboard soon expected to launch for B2B customers. Maxtang ALN-10 specifications: Alder Lak…

Besides announcing the new Immortalis-G715, Mali-G715, and Mali-G615 GPUs, Arm has also introduced the second-generation of Armv9 cores with the Cortex-A715 and Cortex-X3 cores with respectively a 20% energy-efficiency improvement (and smaller 5% performance uplift) over the Cortex-A710 core and a 25% peak performance boost against the Cortex-X2 flagship core. The announcement also includes a “refresh” of the Cortex-A510 core announced last year with a 5% improvement in efficiency and the same level of performance. The Cortex-X3 will also be used in (Windows 11) laptop processors with the single-thread performance improved by up to 34% in that case. Armv9 mobile SoC (Tota…

Description Recently, I accidentally erased an SPI flash with an bootloader installed and tried to reinstall the latest bootloader. But it did not recognize the attached disks and proceeded to TFTP Boot. Only by stopping autoboot and hot-swapping the disks or reattaching did the bootloader recognize it, and I was then able to boot with the command. I investigated and found that the problem occured after U-Boot was updated to v2023.01. This issue has been resolved by applying a patch that was previously used in v2022.07. How Has This Been Tested? By compiling U-Boot from trunk (linux-u-boot-odroidhc4-current_24.2.0-trunk) for v2023.01, v2023.04, v2023.07, v2023.10 and t…

GOLE1 was quite a unique mini PC when it launched in 2016 as it included a 5-inch touchscreen display. HIGOLE is now back with the GOLE1 Pro based on a similar design, but a slightly larger 5.5-inch touchscreen display, and much better specs suitable for 2022’s software and entry-level use cases. The Atom x5-Z8300 “Cherry Trail” processor found in the original device gives way to an Intel Celeron N4200 or J4125 Gemini Lake processor, and the GOLE1 Pro mini PC, which the company sometimes also calls “HIGOLE PC 2022”, comes with up to 8GB LPDDR4X, a 128GB SSD, Gigabit Ethernet, WiFI 6 or 5, four USB 3.0 ports, and more. GOLE1 Pro specifications: SoC (one or the other) Intel…

Last week we checked out the hardware for the GL.iNet GL-S200 Thread Border Router kit with three nRF52840 Thread Dev Boards, and I’ve now had time to work with the kit, so I’ll report my getting started experience in the second part of the review. GL-S200 Initial Set Up I connected the WAN port to my Ethernet Switch itself connected to my modem router and the LAN port to my laptop, so I could access the web interface using the default IP address (192.168.8.1). The GL-S200 uses the same Admin Panel as other GL.iNet routers such as the Beryl AX router we reviewed at the beginning of the year. You’ll be greeted by a wizard to let you select the language and set a new passwo…

Raspberry Pi recently received a strategic investment from Sony (Semiconductor Solutions Corporation) in order to provide a development platform for the company’s edge AI devices leveraging the AITRIOS platform. We don’t have many details about the upcoming Raspberry Pi / Sony device, so instead, I decided to look into the AITRIOS platform, and currently, there’s a single hardware platform, LUCID Vision Labs SENSAiZ SZP123S-001 smart camera based on Sony IMX500 intelligent vision sensor, designed to work with Sony AITRIOS software. LUCID SENSAiZ Smart camera SENSAiZ SZP123S-001 specifications: Imaging sensor – 12.33MP Sony IMX500 progressive scan CMOS sensor with rolling…

Update support for Recore boards Adding support for Recore 3D printer control boards A5 through A8. There is support for these boards in an older version of build, but they don't seem to have been propagated. There are some improvements in this version (thus the "update" in the description) and also support for a newer version of the hardware. Recore is a 3D printer control board. Documentation summary for feature / change [x] short description (copy / paste of PR title) [x] summary (description relevant for end users) How Has This Been Tested? It has been tested on the following hardware: [x] Recore A5 [x] Recore A6 [x] Recore A7 [x] Recore A8 Checklist: [x] I h…

Method from uboot Odroid C2 fix, same problem same workaround. Description On linux 5.15 the new ethernet chip can not be resetted properly. The workaround from uboot Odroid C2 is tested able to fix this. The commit updates the existing patch. https://forum.armbian.com/topic/19846-orange-pi3-lts/page/10/#comment-141243 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [√ ] Test ethernet with modified dtb Checklist: [ ] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particular…

Description Today many users get their rock5c/lite. And they find some rk3582 socs has disabled rkvdec nodes. The board I have has good rkvdec nodes, but when there is at least one rkvdec node disabled, node rkvdec-ccu should get disabled. Otherwise this will cause board not booting. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=rock-5c BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=bookworm KERNEL_GIT=shallow [x] Tested on board with broken rkvdec nodes. Checklist: Please delete options that…

Most WiFi HaLow hardware platforms we’ve seen so far are based on Newracom chips, but AsiaRF AP7688-WHM WiFi HaLow IoT gateway features a module based on Morse Micro MM6108 802.11ah SoC instead. The gateway is powered by a 580 MHz MediaTek MT7688 MIPS processor providing 802.11n WiFi 4 and dual Ethernet networking, and features a USB port as well as an RS232 console for industrial control. WiFi HaLow (802.11ah) enables video and data transmission at a range of up to one kilometer and data rates of up to 32.5 Mbps. AP7688-WHM WiFi HaLow gateway specifications: SoC – Mediatek MT7688 MIPS SoC @ 580 MHz with built-in WiFi 4 System Memory – TBD Storage – TBD Connectivity 2x E…

This week's updates center on new board enablement, Rockchip platform refinements, and tooling and kernel maintenance. Board support expanded across multiple silicon families, with the addition of Seeed Studio reComputer RK3576/RK3588 DevKits and the Anbernic RG DS handheld image. The EasePi A2/R2 received substantial revisions to its board configurations and device trees, alongside a vendor logo transition to Linkease. SpacemiT K1 boot support was updated, and per-SoC LINUXCONFIG separation was introduced for the TQ family to better isolate kernel configurations. Rockchip received the bulk of low-level improvements. Notable changes include AUX recovery for USB-C DP Alt M…

Description Bump sm8250 current to 6.9 based on postmarketos's branch: https://gitlab.com/sm8250-mainline/linux/-/tree/sm8250/v6.9?ref_type=heads. Panel and touch screen patches from 6.7 are dropped because they are never enabled in kernel config. In 6.9 bluetooth of qca6390 won't work with default address hardcoded in driver, and setting a new address of bluetooth can make it work again, so I add a service to generate bluetooth address based on /etc/machine-id, How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=curr…

Dear Armbians, welcome to this week’s newsletter! Here, you’ll find updates on the latest release and community contributions. Armbian Rolling Releases: What You Need to Know Armbian offers rolling releases for users seeking the most up-to-date features and bug fixes. These rolling releases are available at the bottom of the official Armbian download pages. However, it’s important to remember that while these versions are functional, they are not as thoroughly tested as the stable releases and therefore are not recommended for production environments. If you need to switch between stable and rolling releases, check out armbian-config. Recent Changes The Armbian team ha…

Description This patch PCIE initialization error after warm reboot. Typical error log after warm reboot: [ 2.510082] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.510139] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 2.510160] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 2.510748] rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms [ 2.510795] rockchip-pcie f8000000.pcie: no vpcie12v regulator found [ 3.011274] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! [ 3.011373] rockchip-pcie: probe of f8000000.pcie failed with erro…

Dear Armbians, here are the latest highlights Armbian Configuration Tool Enhancements New Label for Issue Tracking To simplify the bug-tracking process and improve prioritization, a new label called “not armbian-config” has been introduced. This label helps users identify and address issues that are unrelated to the Armbian configuration tool. Contributor: @igorpecovnik Commit: 0f24c12 Automatic Documentation Updates Armbian’s documentation system has been upgraded to ensure automatic updates. This improvement guarantees that users always have access to the most accurate and up-to-date information. Contributor: @igorpecovnik Commit: d70cdbf Improved First Login Experi…

Thingpulse ePulse Feather is an ESP32 development board following Adafruit’s Feather form factor and optimized for low power with 12 to 27 uA deep sleep power consumption. The board is based on the ESP32-WROVER with 8MB Flash and 8MB SPRAM and comes with a USB-C connector for charging the battery and programming through a CH9102F UART chip, as well as the I/Os headers provided by the Feather form factor. The board can be especially useful in battery-operated WiFi remote controls for home automation or other purposes that sleep most of the time until the user presses one of the buttons. ThingPulse ePulse Feather specifications: Wireless module – Espressif Systems ESP32-WRO…

Lumination Labs’ Sonatino is an ESP32-S3 board designed for audio applications that follows the Raspberry Pi Zero dimensions so that it can be used with some of the cases designed for the Raspberry Pi Zero. The wireless audio board features Cirrus Logic WM8524 audio DAC and WM8782 audio DAC capable of 24-bit 192kHz stereo output and mono input respectively, a speaker amplifier and two pins for speaker connection, a 3.5mm audio jack, as well as a microSD card slot for the storage of audio or other data. Sonatino specifications: Wireless Module – ESP32-S3-WROOM-1 with SoC – ESP32-S3 dual-core LX7 microprocessor @ up to 240 MHz with Vector extension for machine learning Me…

A friendlier, faster, snap-free desktop install in armbian-configIf you've installed a desktop environment with armbian-config over the last few months, you may have noticed things feel different: there's a tier you can pick, the browser actually works on every arch, uninstall doesn't take half your system with it, and there's no snap pop-up surprising you on Ubuntu builds. That's not by accident — the desktop submodule has been quietly rebuilt from the ground up. Here's what landed, why we did it, and what it means for you. Pick the desktop you want — at install, and afterThree tiers, instead of one all-or-nothing install: minimal — DE + display manager + a terminal. Abo…

TopTon TP-X4F is a mini PC and network appliance equipped with four 2.5GbE ports and powered by a choice of processors from the AMD Ryzen 5000U series up to the Ryzen 7 5825U octa-core-16-thread processor. The system supports up to 64GB RAM and up to five high-speed internal SATA or NVMe storage devices through M.2 sockets and SATA connectors and comes with three 4K display interfaces: HDMI, DisplayPort, and USB-C, as well as four USB ports. TopTon TP-X4F specifications: SoC (one or the other) Ryzen 5 5600U hexa-core/12-thread processor @ 2.3 GHz / 4.2 GHz with Radeon Vega 7 graphics @ 1.8 GHz; TDP: 10-25W (default: 15W) Ryzen 7 5800U octa-core/16-thread processor @ 1.9 …

Most Intel processors do not come with a MIPI CSI camera, but some Alder Lake-N processors do, and Leopard Imaging has designed the LI-ADL-ADP-IMX415-MIPI-081H MIPI CSI camera module that is compatible with the Intel ADL-N CRB (Alder Lake-N Customer Reference Board) and custom Alder Lake-N boards equipped with a compatible MIPI CSI connector. The 13MP camera supports resolutions up to 3864 x 2176 and works with boards and embedded systems based on Intel Atom processors x7000E Series, Intel Core i3-N processors, and Intel Processors N-Series processors. LI-ADL-ADP-IMX415-MIPI-081H specifications: Sony IMX415 CMOS image sensor Diagonal – 6.43 mm (Type 1/2.8) Active Pixels –…

Description This is to fix wrong DRAM size detection in Orange Pi Zero 3 board with 1.5GB DRAM. Currently they are not able to boot as they detect 2GB DRAM, so after applying this patch they will boot normally. Other boards with 1GB/2GB/4GB DRAM will continue working the same way with this patch. This patch would only be applied to u-boot v2024.01 release. I will provide other patch for u-boot v2024.04 and newer. How Has This Been Tested? [X] Build image for Orange Pi Zero 3 board, flash devices with 1/1.5/2/4GB DRAM and power on with serial cable: logs will show the right memory size [X] Build image for Orange Pi Zero 3 board, flash devices with 1/1.5/2/4GB DRAM and p…

Toradex Verdin AM62 is a system-on-module based on Texas Instruments AM62 Cortex-A53/M4 processor with up to 1GB LPDDR4 RAM and 8GB eMMC flash that is the most affordable system-on-module from the company’s Verdin family. The module also comes with a Gigabit Ethernet PHY and an optional WiFi 5 and Bluetooth 5 module and exposes various interfaces through its edge connector such as dual Gigabit Ethernet, MIPI DSI and LVDS display interfaces, a MIPi CSI-2 camera interface, and CAN FD, and more. Toradex Verdin AM62 specifications: SoC – Texas Instruments Sitara AM623/AM625 with up to 4x Arm Cortex-A53 cores @ 1.4GHz, 1x Arm Cortex-M4F @ 400MHz, optional 3D GPU with support f…

Description This is a follow-up of: https://github.com/armbian/build/pull/5901 It resolves a conflict between the SimpleDRM and Panfrost graphic drivers by blacklisting simpledrm. Other boards of the same family are assumed to have the same issue and will probably benefit from this fix as well. However, the fix has been actually tested only on the Khadas VIM3. I cannot test this change for other boards, as I do not own them. The Banana Pi M5 was also included for this change, because the driver conflict has also been mentioned in another Jira ticket. Note that this board is of the meson-sm1 family! How Has This Been Tested? Perhaps someone else has these boards availab…

Forlinx FET3588-C is a relatively compact Rockchip RK3588 system-on-module measuring 68x50mm and exposing many of the processor’s I/Os through four 100-pin high-density connectors. The module ships with up to 8GB LPDDR4x and 64GB eMMC flash, and the company also provides the OK3588-C development board for evaluation with HDMI output and input, two MIPI DSI interfaces, five camera connectors, dual Gigabit Ethernet, M.2 sockets for WiFi and 4G/5G cellular connectivity, and more. Forlinx FET3588-C RK3588 system-on-module Specifications: SoC – Rockchip RK3588 octa-core processor with 4x Arm Cortex-A76 cores @ up to 2.4 GHz, 4x Arm Cortex-A55 cores, Arm Mali-G610 MP4 GPU with …

Rikomagic RKM V7 is an HDMI TV stick running Android 11 on a Rockchip RK3568 quad-core Cortex-A55 processor with 2GB RAM, 16GB flash, Gigabit Ethernet and WiFi 5/6 connectivity, as well as HDMI female port, and two USB ports. While the device could be used as a general-purpose Android mini PC, it is also suitable as a digital signage player with features such as RTC for time on/off control, screen rotation support, and a watchdog timer to ensure continuous operation even if a software crash occurs. Rikomagic RKM V7 specifications: SoC – Rockchip RK3568 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2…

The first stable release of Arduino IDE 2.0 is now out. Based on the Eclipse Theia framework, the new IDE provides a more modern and user-friendly user interface, faster compilation time, and more features we’ll discuss in this post. Arduino initially introduced the Arduino IDE 2.0 beta in March 2021 with a live debugger with breakpoints support, a revamped user interface with features such as autocompletion of variables and functions. After 18 months of debugging with the help of members of the community such as Paul Stoffregen (the maker of the Teensy boards), the Arduino IDE 2.0 is not an experimental software anymore, and it’s the first version you’d see in the downlo…

This week, the Armbian development team pushed several noteworthy enhancements, with improvements spanning user experience, bootloader upgrades, and broader system support. Notably, this week saw the debut of OpenMediaVault in Armbian’s software installer, a move that brings plug-and-play NAS functionality to supported boards. OpenMediaVault is a feature-rich platform that enables users to turn single-board computers into fully-fledged network storage devices. Thanks to a contribution by Igor, the integration is now available through armbian-config interface, giving users a streamlined way to install and configure OpenMediaVault without needing to manually manage service…

LilyGo has launched yet another product based on the ESP32 family of microcontrollers with the T-Embed WiFi IoT controller powered by an ESP32-S3 dual-core processor, equipped with a color display and a rotary encoder, and powered by a battery. The device is programmable and can be used to control Smart Home and IoT devices connected over WiFi or Bluetooth. It also integrates a microphone and speaker, a microSD card for data logging, as well as a Grove connector and an 8-pin GPIO header for expansion. T-Embed specifications: Wireless module – ESP32-S3-WROOM-1 module with an ESP32-S3 dual-core Xtensa LX7 processor with WiFi 4 and Bluetooth 5.0 connectivity, 4 to 16MB QSP…

LilyGo T-Relay-8 is an ESP32 WiFi & BLE board equipped with eight 5V relays supporting up to 250V AC or 28V DC, as well as 16-pin GPIO header for expansion. The board offers a more compact solution than the usual two-board setups with an ESP32 board and a separate 8-relay “Arduino” module, and also integrates optocouplers for improved safety. LilyGo T-Relay-8 specifications: Wireless module – ESP32-WROVER-E module with ESP32 dual-core processor with 2.4 GHz WiFi 4 and Bluetooth 4.2 connectivity, 4MB flash, 8MB PSRAM Relays – 8x HRS4H-S-DC5V 5V relays up to 250VAC/10A or 28VDC/10A with octocoupler isolation, blue LEDs for status Expansion – 16-pin header (unpopulated) …

Description This is needed for any PMIC driver. All i2c transfers on pm_power_off must be atomic. Otherwise we have something like that: [ 4309.560651] reboot: Power down [ 4309.563779] ------------[ cut here ]------------ [ 4309.568399] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41 i2c_smbus_xfer+0xa3/0xa8 [ 4309.576502] No atomic I2C transfer handler for 'i2c-0' [ 4309.581637] Modules linked in: stm32f0_pmic(OE) xt_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_mark nft_counter xt_comment xt_addrtype nft_compat nf_tables nfnetlink wireguard curve25519_neon libchacha20poly1305 chacha_neon poly1305_arm libcurve25519_generic ip6_udp_tunnel udp_tunnel sunrpc…

The GEEKOM MiniAir 11 is not just another mini PC powered by an Intel Jasper Lake N5095 processor but one that distinguishes itself by having a comprehensive range of ports. GEEKOM kindly sent a MiniAir 11 for review and I’ve looked at performance running both Windows 11 and Ubuntu 22.04. MiniAir 11 hardware overview The GEEKOM MiniAir 11 physically consists of a 117 x 112 x 34.2mm (4.61 x 4.41 x 1.35 inches) square plastic case. As an actively cooled mini PC, it uses Intel’s new 10 nm Jasper Lake N5095 processor which is a quad-core 4-thread 2.00 GHz Celeron processor boosting to 2.90 GHz with Intel’s UHD Graphics. The front panel has an illuminated power button, a 3.5mm…

Description When LABEL is longer than 11 characters, mkfs.fat 4.2 (2021-01-31) will fail while mkfs.fat 4.1 (2017-01-24) will cut it. I want to split out a new function for formating filesystem. But unfortunally, there is a hook pre_prepare_partitions and prepare_partitions_custom. And bcm2711 use it for LABEL. Here is my try: hzyitc/armbian-onecloud#6c190484 The source of mkfs.fat: v4.1: https://github.com/dosfstools/dosfstools/blob/v4.1/src/mkfs.fat.c#L1500: case 'n':/* n : Volume name */ sprintf(volume_name, "%-11.11s", optarg); for (i = 0; volume_name[i] && i < 11; i++) /* don't know if here should be more strict !uppercase(label[i]) */ if (islow…

Description This PR adds a board config file for RPi 5. While on it, the PR also removes dependency on flash-kernel. Instead some custom scripts are added into the bsp package for installation of updated dtb, kernel and initrd files. Using both rpi4b and rpi5b will produce images compatible with rpi5, but the image created with BOARD=rpi5b will not run on older hardware. The kernel config, patches etc are shared between both boards. To prevent creating new family for RPI5 specific kernel, I have added support for something I call kernel variants. This is basically going to be almost same kernel with extremely small changes that doesn't justify creating new family and yet …

Description Add v3 patch of rkvdec2. Add a v4l2 patch to fit rkvdec2's 16x16 minnimal decoding size for chromium. Remove VDPU121 node because there is already a 4K H264 decoder. Gstreamer can't handle two. Add udev rule for chromium How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow [x] gst-launch-1.0 --no-fault filesrc location=/home/jfliu/Big_Buck_Bunny_2160_10s_H264_1s.mp4 ! parsebin ! v4l2slh264dec ! autovideosink [x] chromium can decode 4K h264 video. Chec…

WaveShare Touchscreen Driver Fix (Odroid) Description A number of other WaveShare screens also use ID: 0eef:0005 and therefore the patch used to enforce the VU7 driver breaks these other screens. This was the purpose of the "disable_vu7" env boot param which correctly defaults to true. However, this is ignored in boot.cmd + the patches for the kernel reverse the changes made by Hardkernel to fix this problem. I have corrected the problem by removing 0eef:0005 from the driver enforced ignore_list and changed boot.cmd to allow the "disable_vu7" to function correctly (adding usbhid quirk when set to false). How Has This Been Tested? Please describe the tests that you ran …

LILYGO T-QT Pro is an ESP32-S3 WiFi and BLE IoT board with a 0.85-inch color display, 4MB flash, 2MB PSRAM, a USB-C port, a few GPIOs, and support for LiPo battery with charging. It is an upgrade to the ESP32-S3-based LILYGO T-QT V1.1 board that also supports LiPo battery power but lacks a charging circuit, so you had to remove the battery and charge it manually each time. The T-QT Pro adds a charging circuit and switches from an ESP32-S3 with an 8MB flash design to one using ESP32-S3FN4R2 with 4MB flash and 2MB PSRAM. LilyGO T-QT Pro specifications: Wireless MCU – Espressif Systems ESP32-S3FN4R2 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acce…

Edatec CM4 Sensing is a compact industrial computer based on the Raspberry Pi Compute Module 4 (CM4) with multiple RS485, RS232, and CAN bus interfaces, an HDMI port, two USB ports, Gigabit Ethernet, and optional WiFi, Bluetooth, and/or 4G LTE connectivity. The industrial mini PC can operate in the -25 to 70°C temperature range, supports 8 to 28V DC wide voltage input, includes an RTC, and the single board computer also features a MIPI DSI interface to connect the official Raspberry Pi 7-inch display as well as an FPC interface with HDMI and USB touch. Edatec CM4 Sensing specifications: SoM – Raspberry Pi CM4 module with Broadcom BCM2711 quad-core Cortex-A72 SoC, 1GB to…

Last year, we wrote about the Made-in-Russia Mikron MIK32 RISC-V microcontroller with features similar to STM32L0 Arm Cortex-M0+, and I was recently told that the first fully packed samples are expected for the end of autumn. But it turns out there’s another Russian company that makes RISC-V microcontrollers, and for instance, the Milandr MDR32F02FI features the open-source BM-310 RISC-V MCU core and is specially designed for electricity meters. It is the second generation of the microcontroller with the first being based on Arm Cortex-M0 core and produced for over 5 years. Milandr MDR32F02FI specifications: CPU – CloudBEAR BМ-310S 32-bit RISC-V core @ 60 MHz Memory – 112…

Geniatech DS-3566 is a board based on Rockchip RK3566 designed for digital signage applications with a low-profile, multiple video interfaces such as HDMI, LVDS, eDP, and MIPI DSI, and plenty of headers and connectors for expansion. The single board computer ships with up to 8GB RAM, 128GB eMMC flash, and supports Gigabit Ethernet, WiFi 5, Bluetooth 4.1, as well as cellular connectivity as an option. Some of the interfaces available through connectors include RS232, RS485, CAN Bus, I2C, SPI, etc… Geniatech DS-3566 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 EE GPU, 0.8 TOPS NPU System Memory – 2GB to 8GB LPDDR4 Stor…

Description meson8b: Use thirdpart kernel xdarklight/linux to support HDMI How Has This Been Tested? [ ] Odroid-C1 [X] Build [ ] Boot and Test (Because I don't have) [X] OneCloud [X] Build [X] Boot and Test Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

A friendlier, faster, snap-free desktop install in armbian-configIf you've installed a desktop environment with armbian-config over the last few months, you may have noticed things feel different: there's a tier you can pick, the browser actually works on every arch, uninstall doesn't take half your system with it, and there's no snap pop-up surprising you on Ubuntu builds. That's not by accident — the desktop submodule has been quietly rebuilt from the ground up. Here's what landed, why we did it, and what it means for you. Pick the desktop you want — at install, and afterThree tiers, instead of one all-or-nothing install: minimal — DE + display manager + a terminal. Abo…

We’ve previously seen it’s possible to connect an eGPU to a mini PC through a PCIe x16 to M.2 NVMe adapter or a Thunderbolt 3 port, but while it’s fine to install on your desk for gaming or develop AI applications, the eGPU being larger than most mini PCs, it’s a little too big to integrate into products, and potentially inconvenient to carry around. ADLINK Pocket AI portable eGPU changes that with an NVIDIA RTX A500 GPU housed in a 106 x 72 x 25mm box that’s about the size of a typical power bank and connects to a host through a Thunderbolt 3 connector. The company says the upcoming eGPU is mostly designed for AI developers, professional graphics users, and embedded indu…

Manufactured with a 4nm processor, the MediaTek Dimensity 7200 is an octa-core Armv9 processor designed for mainstream smartphones. with two Cortex-A715 cores, six Cortex-A510 cores, a Mali-G610 MC4 GPU, as well as 5G, WiFi 6E, and Bluetooth 5.3 connectivity. So far, I had only seen Armv9 SoCs with a mix of Cortex-A510 “LITTLE” cores, Cortex-A710/A715 “big” core, and Cortex-X2 or Cortex-X3 “flagship cores” as found in the Dimensity 9200 processor, but the Dimensity 7200 is one of the first Armv9 processors – one other being the Snapdragon 7 Gen 1 – without a Cortex-X core in order to provide a more affordable solution. MediaTek Dimensity 7200 specifications: CPU 2x Arm C…