SBC News

Making its debut this week at Augmented World Expo (AWE) in Long Beach, ElectricMaple is an innovative project by Collabora and PlutoVR designed to enhance standalone XR experiences through remote-rendering. View the full article

Description station-m2: use radxa's vendor u-boot. The issue of legacy & vendor kernel failing to boot has been resolved using the radxa's vendor u-boot. It has been tested on legacy, vendor, current, and edge kernel branches. How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description bash-completion adds the functionality for autocompleting command when pressing . This is an essential shell functionality and should be enabled even on a minimal image. The package has no dependencies and is slim: https://packages.ubuntu.com/noble/bash-completion How Has This Been Tested? [x] Install minimal image without bash-completion: pain 😵‍💫 [x] Install minimal image without bash-completion: nice and efficient 🌈 Checklist: [x] My code follows the style guidelines of this project [ ] My changes generate no new warnings View the full article

Description Maintainace. How Has This Been Tested? [x] Noticed that it breaks on building if this repo is enabled Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Renaming network device to eth0 How Has This Been Tested? [x] Generated image Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This will allow dynamic selection and we could make even leaner NM free minimal images. Which will be defaulted to systemd networking. move Netplan with it Jira reference number AR-2373 How Has This Been Tested? [ ] Brief assembly test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Rename audios like other rk3588 boards. Jira reference number [AR-9999] Documentation summary for feature / change Please delete this section if entry to main documentation is not needed. If documentation entry is predicted, please provide key elements for further implementation into main documentation and set label to "Needs Documentation". You are welcome to open a PR to documentation or you can leave following information for technical writer: [ ] short description (copy / paste of PR title) [ ] summary (description relevant for end users) [ ] example of usage (how to see this in function) How Has This Been Tested? Please describe the tests that you r…

Description Add support for rk3399 based SBC Leez P710 How Has This Been Tested? Build noble desktop img with command: ./compile.sh build BOARD=leez-rk3399 BRANCH=edge BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DOWNLOAD_MIRROR=bfsu EXPERT=yes EXTRAWIFI=no KERNEL_CONFIGURE=no PREFER_DOCKER=no RELEASE=noble Write the output img to tf card, inserd the card into the board, power up the board, the board can run into noble desktop. Checklist: [ ✓] My code follows the style guidelines of thi…

Description Fix boot from btrfs fs in uboot 2024.01/2024.04 How Has This Been Tested? [x] Compile image and boot from (zstd-compressed) btrfs sole rootfs/bootfs partition Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Description basiclly, legacy kernel for board firefly-itx-3588j How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] build [x] boot [x] can play music, Hi-Fi! Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] dependent on https://github.com/armbian/linux-rockchip/pull/193 View the full article

Description Shellcheck errors/warnings were: In lib/functions/rootfs/distro-agnostic.sh line 155: display_alert "Adding to extlinux.conf" "fdtoverlays=${DEFAULT_OVERLAYS[@]}" "debug" ^--------------------^ SC2145 (error): Argument mixes string and array. Use * or separate argument. In lib/functions/rootfs/distro-agnostic.sh line 156: echo " fdtoverlays ${DEFAULT_OVERLAYS[@]}" >> "$SDCARD/boot/extlinux/extlinux.conf" ^--------------------^ SC2145 (error): Argument mixes string and array. Use * or s…

Quick fix for PR https://github.com/armbian/build/pull/6743, see https://github.com/armbian/build/actions/runs/9520292766/job/26245280729 It's not any-globs-to-all-files, but any-glob-to-all-files. View the full article

Description Jira reference number AR-2368 How Has This Been Tested? [x] Generated Gnome desktop image didn't go into suspend by default Checklist: [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Khadas Edge 2 images has been shipped without Uboot and it may cause some problems like not-booting when eMMC and SPI is empty. This PR adds vendor's uboot to Edge 2 images. I've also added BL32 blob because the board doesn't boot when SPI has BL32 blobs and SD card doesn't have. cc @rpardini @viraniac How Has This Been Tested? [x] SPI + SD card [ ] Empty SPI + SD card [ ] SPI + eMMC [ ] Empty SPI + eMMC Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes gener…

Description Enable the current kernel branch for some RK3588 boards, which was introduced in https://github.com/armbian/build/pull/6699 current is kernel version 6.8 at the moment and should stay a more stable alternative than edge, which is often a rc kernel. This is useful when using the board as daily driver for example or when you don't want anythign at all to suddenly break. current will stay at the next LTS kernel once released. I did not enable it for every board at once, only the NanoPC T6 and the CM3588 NAS for now. Feel free to add a commit to this PR or let me know if you'd like to enable current on a specific board. How Has This Been Tested? [x] ./compile.…

Description This is a resubmission of https://github.com/armbian/build/pull/6482 which was reverted in https://github.com/armbian/build/pull/6524 due to build errors. I don't know what exactly failed last time and my build tests this time run successfully just fine on Ubuntu 24.04. Maybe the error is specific to certain configurations and will return, so please don't merge until CI has done some tests and a build was successful. I have slightly improved this latest version by moving the function call to validate_dts in kernel.sh slightly further down after kernel_config ran since make expects a .config file. Original description This new command can be used like this: …

Description While the NanoPi R6C can in theory also use an Armbian image built for the NanoPi R6S like described on the Armbian website, it was not a user-friendly solution at all. Add the R6C as separate board with support for the latest mainline U-Boot. The R6S is a solid little machine with one M.2 slot for a NVMe SSD as well as two Ethernet ports (1x 1G, 1x 2.5G), two USB-A (USB2 and USB3) ports and even an integrated chip for UART debugging, so you only need to connect a USB-C cable for debugging instead of the three cables with a separate UART-USB adapter. Wiki link: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R6C Hardware specs: SoC: Rockchip RK3588…

Description The latest migration to 6.10 broke some functions of Khadas Edge2 board. This PR fixes them. Jira reference number [AR-9999] How Has This Been Tested? [x] Auto fan control works. [x] Typec works again. Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Update JetHome JetHub D2 support: add patchset for u-boot update kernel patches Update #6725 Jira reference number AR-2028 View the full article

rockchip-rk3588 6.8.y: nanopct6: Add NanoPC T6 SPI Flash (v6.8.y version) rockchip-rk3588 6.8.y: nanopct6: Add NanoPC T6 SPI Flash (v6.8.y version) View the full article

Description Add a patch series to support VEPU121/VPU121, which mainly enables hardware decoding for H.264. It can also decode MPEG2 and VP8 as well as do JPEG encoding. Usually I am against bloating the kernel with patches since it makes it more difficult to maintain. But having access to the RK3588's H.264 decoder is really useful for day to day tasks. How Has This Been Tested? [ ] Needs some testing View the full article

Part 3 of the cmtp-responder series with a focus on USB gadgets explores several new elements including a unified build environment with Docker and an example strategy for building and deploying to a target. View the full article

Description Move stack pointer further from base address to allow bigger uboot images. Currently uboot stack pointer located 1MiB after text base, and uboot size with defconfig is barely less than 1MiB (1001472). So any small modification in code/config/compiler-version could overflow text area (my uboot blown up after I enabled verbose logging to debug btrfs boot problem). How Has This Been Tested? [x] Build and boot rk3318-box Checklist: [x] I have performed a self-review of my own code View the full article

Add audio support to hdmi output (meson) View the full article

Description Find and take loop device in one shot to prevent race condition How Has This Been Tested? [x] Build image Checklist: [x] I have performed a self-review of my own code View the full article

Description Bump sm8250 current to 6.9 based on postmarketos's branch: https://gitlab.com/sm8250-mainline/linux/-/tree/sm8250/v6.9?ref_type=heads. Panel and touch screen patches from 6.7 are dropped because they are never enabled in kernel config. In 6.9 bluetooth of qca6390 won't work with default address hardcoded in driver, and setting a new address of bluetooth can make it work again, so I add a service to generate bluetooth address based on /etc/machine-id, How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=curr…

Description FriendlyElec ships their devices with the latest blobs. Trying to run an Armbian image on this board with the old blobs might cause issues. @rpardini run into those issues with the NanoPC T6 and fixed it in https://github.com/armbian/build/pull/6711 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description JetHome Jethub D2 (j200) is a home automation controller with the following features: DIN Rail Mounting Amlogic S905X3 (ARM Cortex-A55) quad-core micro-HDMI video out 4GB LPDDR4 32GB eMMC flash 1 x USB 2.0 1 x 10/100/1000Mbps ethernet two module slots for radio/wire interface cards 2 x gpio LEDS 1 x 1-Wire 1 x RS-485 3 x dry contact digital GPIO inputs 2 x relay GPIO outputs DC 9-36V power source with battery UPS on board option Jira reference number AR-2028 How Has This Been Tested? Build and run ok. [X] JetHub D2 Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented …

Description sun55iw3-syterkit: update kernel config How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Helping @alexl83 with his OrangePi 5 Plus 😄 Support for this board with SPI image was added to U-Boot this january: https://github.com/u-boot/u-boot/commit/7c084fd51c0c52b24facdbcfeeaf2c70fba03406 Also add the latest DDR and BL31 blobs, this should fix issues like recently on the NanoPC T6. Marked as WIP to give room for testing. How Has This Been Tested? [x] Build success: ./compile.sh BOARD=orangepi5-plus BRANCH=edge RELEASE=trixie EXPERT=yes KERNEL_CONFIGURE=no BUILD_MINIMAL=no BUILD_DESKTOP=no uboot [ ] @alexl83 please test freshly built edge kernel image [ ] @alexl83 please test freshly built vendor kernel image (vendor u-boot should be applied) [ ] …

the unthinkable: rockchip-rk3588 current (to 6.8.12, EOL and non-LTS!) and edge to 6.10-rc2 (from #6699) first move stuff around first I called the old 6.8.y oldedge, later renamed to current (!) .config's for edge and current are now version-filenamed rk3588: edge: Bump kernel from 6.8 to 6.10 Bump mainline kernel from 6.10-rc1 to 6.10-rc2 Remove patches which are now mainlined Re-number "fix-initial-PERST-GPIO-value" patch as per number ordering seen in 0000.patching_config.yaml Rewrite kernel config rk3588: edge: Fix dtb overlay compilation and installation "general-add-overlay-compilation-support.patch" became obsolete in Linux 6.9 (see AR-2352 [1]). Fix this …

Description update-apt-xapian-index takes an insane amout of time during buid - compounding over dozens of builds you get a nice overhead in compute-time in the hours range This PR disables update-apt-xapian-index for unstable releases ( $BETA = yes ) How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Built orangepi5-plus desktop with and without BETA=yes, results below Baseline 1st run ( CLEAN_LEVEL="debs,cache" ) Repeat Build Options [ ./compile.sh opi5plus build BRANCH=edge BUILD_DESKTOP=yes CLEAN_LEVEL=debs,cache DESKTOP_APPGROUPS_SELECTED='browsers chat d…

Description rk-35xx-vendor-6.1 minor touches: - move CONFIG_INPUT_RK805_PWRKEY and CONFIG_PINCTRL_RK805 to modules - move CONFIG_BT to module - add rtw89 8852be/ce wifi support via xunlong/linux-orangepi commit-id 96b2d2827a3f1e4719ebdfcac0b2108e8cbae932 see net: wireless: realtek: Sync rtw89 driver from linux6.2 linux-rockchip-rk3588-edge.config minor touches: - move CONFIG_INPUT_RK805_PWRKEY and CONFIG_PINCTRL_RK805 to modules - move CONFIG_BT to module This enables powerkey functionality for orangepi5-plus OOB Jira reference number AR-2360 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relev…

nanopct6: Kwiboo 24.07 u-boot for edge; bump blobs for all branches nanopct6: Kwiboo 24.07 u-boot for edge; bump blobs for all branches exclusive for edge / Kwiboo: enable UMS / RockUSB and other gadget stuff enable TCP networking features, wget etc enable EFI debugging stuff store environment in SPI uses preboot to flash led briefly this code pattern is becoming copypasta fast and needs refactor before it spreads too much also for all branches (legacy/vendor/edge): BOOTDELAY=1 so we can stop u-boot via UART a bit easier (also for nanopc-cm3588-nas board) can still do it with zero, but it's so much harder; and it's utility outweighs the 1-second delay IMHO nanopc…

odroidhc4: bump to u-boot v2024.04; drop most defconfig patches in favor of hooks odroidhc4: bump to u-boot v2024.04; drop most defconfig patches in favor of hooks add pre_config_uboot_target hook for switching BOOTCONFIG across the two targets adapt UBOOT_TARGET_MAP to not call the defconfig Makefile targets directly, instead, just do a variable assignment (ignored by Make) otherwise, when using the defconfig directly in the UBOOT_TARGET_MAP, the post_config_uboot_target .config changes are overwritten when Make is called only patch left is boot usb-nvme-scsi/sata first (still done in meson64.h) remove FIP handling from family file meson-sm1.conf into board file hoo…

Description Maintenance job. We provide options to build several desktop combinations, but we don't have a mechanism for verifying if those targets still work. I developed a simple action script that cycles all variants that are either supported or community supported. Community supported will only check for deboostrap success. This commit is a result of reading build logs of that Action script. Kde-Neon is in EOS zone as it doesn't build anywhere (atm). AR-2358 How Has This Been Tested? [x] Targets were tested for (x86 qemu which will be further tested on VM once CI extents to this functionality) image compiling. Checklist: [x] My code follows the style guidelines …

Description Due to crypto policy update, apt now (since v2.7.13, see the commit) requires repositories to be signed using one of the following public key algorithms: RSA with at least 2048-bit keys Ed25519 Ed448 Affected: Ubuntu Oracular when adding Mesa PPA. More info https://ubuntuhandbook.org/index.php/2024/04/workaround-apt-warning-signature-key-uses-weak-algorithm/ Jira reference number AR-2359 How Has This Been Tested? [x] https://github.com/armbian/os/actions/runs/9434613892 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand a…

Description Per Igor comment helios64 required work to sync with upstream changes. I took the liberty to keep more of upstream than in Armbian 6.8, namely: I kept nodes at their upstream location to remove unnecessary work when syncing to the upstream keep "ethernet0 = &gmac;" in aliases, to let the ethernet MAC retrieved from OTP in u-boot apply. This will restore this feature (the u-boot was still functional). U-boot retried ethernet MACs are in u-boot printenv output "ethaddr" and "eth1addr". Seems for a few years I had the Linux kernel autogenerated one but my config still had the correct one commented (I did not find why it broke back then). I removed the overc…

Description On every PR, a workflow is started to check if artifacts should be built. This happens not only once, but many times, e.g. for every selected reviewer. Since the workflow has cancel-in-progress enabled, workflows are started and immediately cancelled by the next one, resulting in many notifications (see https://github.com/armbian/build/actions/workflows/build-artifacts-pr.yml how many of the workflows were duplicates which were cancelled). Move the cancel-in-progress concurrency policy to the second job which starts only after a check is done if the 'Build' label is even active on the PR. This should greatly reduce "Workflow cancelled" notifications via GitHub…

Description The "swapaccount=" option has been deprecated in 6.1. Disable it in almost all boot scripts except "boot-sun50iw9.cmd" since that one is used in sun50iw9 legacy kernel, which is version 4.9. In theory, rk3588-legacy is also still <6.1, but that boot script is also used by 6.1 vendor kernel and the amount of new images being built/used with the 5.10 legacy kernel is likely minimal. As far as I know, bootscript won't update automatically, so these changes will only apply to freshly built images. Please correct me if I'm wrong. Link to kernel commit: https://github.com/torvalds/linux/commit/b25806dcd3d5248833f7d2544ee29a701735159f Closes issue https://githu…

Description Support partner. How Has This Been Tested? [x] Was reported as working good. Checklist: [x] Any dependent changes have been merged and published in downstream modules View the full article

Description In an effort to reduce wifi driver burdens AR-1745, I went through the 6.10 kernel to check if any third party wifi drivers can be removed. The following drivers are part of the mainline kernel as of 6.10: RTL8723CS (driver: RTW88) RTL8811CU and RTL8821C (driver: RTW88) RTL8192EU (driver: RTL8XXXU) To give them some more time in the oven, use them not from 6.10 but from 6.11 onwards. I went through the Armbian forums, Atlassian and GiHub issues to see if anyone had used those drivers for these chips in the past and had reported issues. But I haven't found anything yet. RTL8723DS is also supported by RTW88, but I have not touched that driver since it is st…

Dear Armbians, Armbian point releases are times when our entire team works diligently to stabilize our highly complex ecosystem. We understand that, despite our best efforts, there will always be some issues that may not work perfectly. We estimate that resolving bugs and adding new features for each release takes thousands of hours to be completed. This is what the Armbian and its community contributes on top of the vanilla Linux code, which is aggregated at common points, usually referred to as mainline. The code, contributed by many individuals, is intended to be stable. However, given the complexity of the Linux kernel and its maintenance by a diverse group of people…

The final installment of a series explaining how Collabora is helping shape the video virtualization story for Chromebooks with a focus on the future plans for cros-libva and cros-codecs. View the full article

Description Allow to use Docker credentials for oras-cli push artifacts when CI=true is set, but not in GitHub action. TODO: fix GITHUB_OUTPUT use if CI=true is set. Jira reference number AR-2357 How Has This Been Tested? [X] correct push to external container registry with CI=true Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] My changes generate no new warnings View the full article

Description Ubuntu noble ships qbootctl with a bug which makes qbootctl service can't start: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1057918. I fixed it in my ppa liujianfeng1994/qcom-mainline. I use a silly dd method to create rootfs. It's better to use losetup to load the built image and copy rootfs from the mounted loop device. Note: ubuntu noble also ships mkbootimg with bug: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050300, which will make this extension not working. So it's better not using noble as build environment. Debian's fix is still not packaged: https://salsa.debian.org/android-tools-team/android-platform-tools/-/commit/d26c3b5ac89efd92…

Description The general improvements for RK3588 on 6.9 and 6.10 weren't as many as we've hoped, but still this is what was mainlined: USB3 DRD support, including PHY usbdp HDMI PHY GPU We already had most of those features patched in via patches, but this gives us the chance to finally be able to remove those and stay closer to mainline. -> PR summary: (+5,895 - 28,098) ~= 22,000 lines less 👍 (meaning less hassles in the future, less maintenance needed) In addition to that, I have also updated our patch to support RK3588 thermal sensors and management, enabling and improving the use of cooling fans. This patch also includes updates for CpuFreq and OPP. We had an o…

it is alone in 6.8 dir :) View the full article

u-boot-radxa-rk3588/legacy: use 000.patching_config; fix boot from SD when combined with from-factory eMMC blobs (TEE mismatch) u-boot-radxa-rk3588/legacy: rewrite u-boot patches, no changes u-boot-radxa-rk3588/legacy: add 0000.patching_config.yaml and move all null-patches into dt and defconfig dirs as bare files DTs and defconfigs should be identical to their null-patch equivalents u-boot-radxa-rk3588/legacy: rewrite nanopc_t6_defconfig -- no changes CONFIG_REGULATOR_RK806=y seems a leftover that's not really used? u-boot-radxa-rk3588/legacy: rewrite nanopc_cm3588_defconfig -- no changes CONFIG_REGULATOR_RK806=y seems a leftover that's not really used? u-boot-…

Last week I attended the GStreamer spring hackfest in Thessaloniki to work on the PipeWire GStreamer elements and connect with the community. View the full article

Description New codec and hub code for HDMI and analog sound on Allwinner H616 and H618 SOCs, including all the bits and pieces to implement the code (dts and configs). How Has This Been Tested? The patch was implemented on a recent fork of armbian build main. two images were built, Debian bookworm server from edge and Debian bookwork desktop xfce from current. Server testing: Analog audio was unmuted using alsamixer by unmuting Left out DACL and Right out DACR. Mpg123 was installed and used to play an mp3 file. Aplay speaker-test was also used to check left and right audio. Playing the mpg file and the speaker-test were also performed from an HDMI monitor connection. …

Checklist: [x] I have performed a self-review of my own code View the full article

Description Fix the typo in config file concerning dtb How Has This Been Tested? build/boot tested Checklist: Please delete options that are not relevant. [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description Bump rockchip64 edge kernel to 6.9. The same fix that has been proposed in https://github.com/armbian/build/pull/6690 has been ported here too and it works as well. Note: at the current status, helios64 board patches have been disabled because the base device tree does not apply on kernel 6.9. Jira reference number AR-2348 How Has This Been Tested? [x] Compiled successfully [x] Upgrade the kernel (and device trees obviously) on a rk3318/rk3328 live system, dtbo applies correctly and system boots fine [ ] Upgrade the kernel on a live rk3399 system Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this pr…

Description As per subject, bump rockchip 32 bit edge kernel to 6.9. Patches have been left as is because all of them applied fine, except for the device tree overlay compilation and installation. The device tree things have changed in 6.9 and the patch does not apply anymore. After some headeaches with the terrible makefiles, the second commit of this PR contains some hints on how I did the job and can serve as a icebreaker for other families perhaps. In particular: Some little accomodations in the overlay Makefile. the kernel makefile already supports dtbo files, but it wants the sources with .dtso extension, so all the device trees in overlay directory must be rena…

Adds the needed files support the spidev on the NanoPi Neo3 with a different address. Tested on my own NanoPi Neo3 with a LoRaWAN concentrator connected via SPI. I am unsure about the changes in rockchip-fixup.scr-cmd. It needs a user to use a not very convenient device "number" specific to the NanoPi Neo3. But I did not know how to do this differently without possibly breaking other boards. Any suggestions on how this is usually done are welcome. Still it seems I am the only person on this planet to use SPI on the NanoPi Neo3 as no one else seems to have reported anything... Any constructive feedback is very welcome. View the full article

Description Currently, dtbo path in boot.ini is wrong. So we cannot load device tree blob overlays for cloudshell2. This commit fix this path in boot.ini How Has This Been Tested? Path was tested and dtbo's are succesfully loaded. Checklist: Please delete options that are not relevant. [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description ssh.service activation fails on first boot due to a race condition with armbian-firstrun (missing host keys at ssh.service startup) By changing armbian-firstrun.service to run After=ssh.service SBC is always reachable realibaly via ssh, even on first run, so that it can be configured headlessly by remote login IT also reverts commit IDs: #911c756083164c32051d533ca3f2de488f202130 and #30c47f6f6cebd75f5c28866918fea093b8c82b44 disabling ssh.socket - this fixes SSH Deamon behavious to honour ListenAddress directive when set via sshd_config Jira reference number [AR-2356] How Has This Been Tested? [x] Compiled and first-run vanilla armbian Bookworm-Edge [x] Co…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Adding support for the fine3399 board. Documentation summary for feature / change Please delete this section if entry to main documentation is not needed. If documentation entry is predicted, please provide key elements for further implementation into main documentation and set label to "Needs Documentation". You are welcome to open a PR to documentation or you can leave following information for technical writer: Adding support for the fine3399 board How Has This Been Tested? Please…

Description As per title. How Has This Been Tested? [x] Patch test Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint, rename patch folder and rewrite kernel config. Jira reference number AR-2355 How Has This Been Tested? [x] Patch Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint, moving folder to expected location, add upstream patch Jira reference number AR-2354 How Has This Been Tested? [x] Patch test Checklist: [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint, moving folder to expected location, add upstream patch. @belegdol Jira reference number AR-2353 How Has This Been Tested? [ ] CI Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Update maintainers and board status Check for errors: https://github.com/armbian/scripts/actions/workflows/pull-maintainers-from-database-and-make-a-pr.yml synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

Description Add dummy regulators to pinctr dts for orangepione SBC. This will prevent the kernel driver from issuing warnings "supply vcc-xx not found, using dummy regulator" for the dummy regulators added. Documentation summary for feature / change How Has This Been Tested? Initially the dts entries were manually added to a running system using the dts editor in armbian-config to verify that the changes produced the desired result. Then a kernel patch was created, put into a git repository and an image generated from that repository. After installing the image on an orangepione the dtb was examined via the dts editor of armbian-config to confirm the presence of the req…

Description Uboot v2024.01 leaves HDMI/VOP and USB ports in a state that is not liked by vendor kernel tools (eg. the Multitool), thus making their usage difficult or impossible. These patches will assert the resets for HDMI, VOP and USB ports and deassert them on uboot exit, so the kernel (any kernel) will find them in active and "clean" state. Nerd note: the USB nodes in uboot device tree do not have the reset properties. Adding the reset properties makes the USB ports undetectable to the kernel because uboot - on purpose - leaves the devices with the reset asserted. To let the kernel detect the ports, you have to add the reset properties in the kernel device tree too…

Description Radxa Rock 3C has a variant with aic8800 wifi 6 module using sdio, marked as board rev 1.4. The dkms driver is added to the image by reusing the extension recently added in #6670. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh build BOARD=rock-3c BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow RELEASE=trixie Build log: https://paste.armbian.com/epehanekey [x] Wifi is detected on image first boot on my Rock 3C rev 1.4. Checklist: Please delete options that are not relevant. […

Join us at Augmented World Expo for a first-hand look at our recent XR work including ElectricMaple remote rendering, and xrdesktop showcasing a fully open-source 3-window desktop configuration with gaze-driven window selection. View the full article

The world of AI has made leaps and bounds from what it once was, but there are still some adjustments required for the optimal outcome. With the help of WhisperLive, VoxAI was able to improve its response time and oratory abilities. View the full article

Description Rock 5c has an on board aic8800 usb wifi module, which need dkms packages from https://github.com/radxa-pkg/aic8800. Add an extension to preinstall these packages to image. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh build BOARD=rock-5c BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow RELEASE=bookworm. Build log: https://paste.armbian.com/jabulawezu [ ] I don't have rock 5c at my hand to test, I will share my built images to my friends to test. Checklist: Please delete option…

Dear Armbians, We’re excited to announce a new Armbian release: Armbian 24.5.1 Havier! This release focuses on stability and UX improvement, with an emphasis on stable builds and the hardwares we support the most. The changelog of this release is just massive! Key highlights Reproducible Armbian OS and Armbian build framework are tightly connected. Framework can build custom Debian or custom Ubuntu. Armbian Ubuntu is made from LTS or latest packages and is cleaned from all Canonical packaging including snapd. By default, we provide the latest critical packages also in the LTS package base. Armbian Jammy and Noble comes with highly optimized, specially built for each har…

Description Maint. How Has This Been Tested? [ ] CI Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint How Has This Been Tested? [x] CI Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Maint task. How Has This Been Tested? [ ] CI Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Maintainace task. How Has This Been Tested? [ ] CI Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Main. Kernel config rewrite applied. How Has This Been Tested? [ ] CI Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description station-m3: use radxa's new u-boot. Fix station-m3 audio issue. How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Add support for a rk3568 based SBC Lubancat2 in my hand. The u-boot and linux kernel support is landing mainline for a few months. How Has This Been Tested? Test: ./compile.sh build BOARD=lubancat2 BRANCH=edge BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=xfce DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DOWNLOAD_MIRROR=bfsu ENABLE_EXTENSIONS=mesa-vpu EXPERT=yes EXTRAWIFI=no KERNEL_CONFIGURE=no PREFER_DOCKER=no RELEASE=noble VENDOR=Armbian Write the image to tf card, insert the card to the board, the board can boot into desktop…

"重命名add-new-borad-tinker-edge-r.patch -> patch/u-boot/u-boot-rockchip64/add-new-board-tinker-edge-r.patch；添加了对xiaobao-nas的支持" Description add-new-borad-tinker-edge-r.patch -> patch/u-boot/u-boot-rockchip64/add-new-board-tinker-edge-r.patch；Adding support for xiaobao NAS. add config/boards/xiaobao-nas.csc,add atch/kernel/archive/rockchip64-6.1/add-board-xiaobao-nas-dts.patch,add patch/kernel/archive/rockchip64-6.6/add-board-xiaobao-nas-dts.patch,add patch/kernel/archive/rockchip64-6.8/add-board-xiaobao-nas-dts.patch,add patch/u-boot/u-boot-rockchip64/add-new-board-xiaobao-nas-dts.patch. How Has This Been Tested? Please describe the tests that you ran to verify your…

add ugoos x3 support to aml-s9xx-box: added prebuild uboot 2024.04 ("u-boot-s905x3" does not work with ugoos) added patch to build u-boot from sources added dts for ugoos x3 View the full article

Description longanpi-4b: add support for Sipeed LonganPi 4B. Add virt drivers for sun55iw3-syterkit. How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description For future - make separate browser extension. How Has This Been Tested? [x] Generated Odroid M1 image with this extension XFCE fails due to missing wayland Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Improved support for BigTreeTech Pi and CB1 Jira reference number AR-2312 How Has This Been Tested? Testing building and running on real hardware was not performed yet [ ] Hardware tests Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Another small adjustment / optimisation of board configs and statuses similar to https://github.com/armbian/build/pull/6569 How Has This Been Tested? Status changes. Checklist: [x] My code follows the style guidelines of this project View the full article

base-files: hardcoded cache of base-files version per RELEASE/ARCH, as of 20240522 base-files: hardcoded cache of base-files version per RELEASE/ARCH, as of 20240522 packages.debian.org and packages.ubuntu.com are having a meltdown and builds are stuck this is a quick & dirty fix to get builds going we should urgently replace this with the 'right thing' trying to maintain this manually will cause insanity View the full article

Mesa 24.1 is out, and the graphics team at Collabora has been working hard to bring a slew of new features and bug fixes to Panfrost, Zink, NVK, and Mesa in general. Here's a look at their contributions for this release cycle. View the full article

Description None. How Has This Been Tested? Not been. Checklist: [x] My code follows the style guidelines of this project View the full article

Dear Armbian Community, We are excited to announce that our new release is approaching quickly, with an estimated release date of May 25th. Our team is working actively on the final touches, focusing on stability and fine-tuning advanced features such as 3D and video acceleration. We’re utilizing the best available methods, as there are multiple options to consider. We are adjusting our build targets to include stable, rolling and application-specific builds. Stable Releases: For those who prefer a more reliable and tested environment. Rolling Releases: For the latest updates and experimental features. Applications: Optimized builds for specific applications. We will…

Description Resolving 3d and multimedia extensions confusions. Replacement for: https://github.com/armbian/build/blob/main/extensions/mesa-oibaf.sh https://github.com/armbian/build/blob/main/extensions/rk-multimedia-amazingfate.sh https://github.com/armbian/build/blob/main/extensions/rk-panthor.sh and custom one: https://github.com/armbian/os/blob/main/userpatches/extensions/amazingfated-rk3588.sh How Has This Been Tested? [ ] Made all test images with enabled extension Checklist: [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description It is known that it is built without errors and works on a test platform. freeze the kernel version v6.6.31 sunxi-6.6: rework patches for current v6.6.31 [ ] short description (copy / paste of PR title) [ ] summary (description relevant for end users) [ ] example of usage (how to see this in function) How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build & Test on board Bananapi-m64 View the full article

Description Minor fixes: limit creation of git-sources.json file to following commands - targets, debs-to-repo-json, gha-matrix and gha-workflow Solve slowness when building Ubuntu Noble images. Fixes #6531 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested Ubuntu noble rootfs creation speed improvement using ./compile.sh BOARD=khadas-vim4 BRANCH=legacy KERNEL_CONFIGURE=no BUILD_MINIMAL=yes RELEASE=noble ARTIFACT_IGNORE_CACHE=yes rootfs. It reduced build time from 26 minutes down to only 8 minutes. Checklist: Please delete options that are not relevant…

Description doas is not compatible with sudo flags. The codebase was checked for sudo-specific uses of this function, but none were found, all cases were in the form of sudo <command>. Replacing it with doas <command> yields the same result. Was extracted from #6576 and can't be merged until it's reverted in #6642 How Has This Been Tested? Used to build images on my machine with extensions that use is_root_or_sudo_prefix Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the …

Reverts armbian/build#6576 View the full article

Description Upstreaming patch: https://patchwork.kernel.org/project/linux-rockchip/patch/20240430024002.708227-3-liujianfeng1994@gmail.com/ The current fdb50400 won't work. there are errors in dmesg when doing decoding. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, …

Description Update odroidxu4-current kernel to 6.6.31. How Has This Been Tested? [x] Reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I guess all these BOOTFS_TYPE come from https://github.com/armbian/build/pull/3874. Rock3a and other rk356x boards uses an old version of vendor u-boot: https://github.com/radxa/u-boot/tree/stable-4.19-rock3, which has bad support for ext4 filesystem. While rk3588 uses new version of vendor u-boot which doesn't have ext4 partition issue, so I just drop all this config from rk3588 boards. Command to query boards with this config: grep -rn rockchip-rk3588 config/boards/|awk -F ':' '{print $1}'|xargs grep BOOTFS_TYPE Here are the vendor uboot source of these boards: board vendor uboot source armsom-sige7 armsom-w3 nanopc-cm3588-nas nanopct6 nanopi-r6s r…

Description After testing, it was found that Firefly-RK3399 cannot boot using the mainline device tree due to issues with the PMU (Power Management Unit). Even after fixing the PMU problem, Bluetooth still cannot be used. Therefore, the original patch has been optimized by removing unnecessary parts. How Has This Been Tested? [x] Almost all hardware functions(HDMI, WiFi, BT, GbE, USB...). [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been…

lib & config: give shellcheck directions (to /dev/null for dynamic, to repo-relative path for static) for all sourced references lib & config: give shellcheck directions (to /dev/null for dynamic, to repo-relative path for static) for all sourced references in preparation for tightening the shellcheck severity level it needs to be able to follow all sources; dynamic ones are ignored, static ones need root-relative prefix View the full article

t95z: add board file (and u-boot 2024.04) for T95Z Plus Amlogic tvbox t95z: add board file (and u-boot 2024.04) for T95Z Plus Amlogic tvbox we've had kernel patches/DT (from chewitt) for this in meson64 for a long time, but I never sent the board uses blobs for the tartiflette-s912 which is also an DDR3 S912 (VIM2's blobs are DDR4 and won't boot) this adds u-boot 2024.04 support, using chewitt's DT & 000.patching_config.yaml & a specific BOOTPATCHDIR this is a full board as-if it was an SBC, and expects to boot from mainline u-boot; for that to work you've to wipe the eMMC and get rid of the vendor-supplied u-boot if this is not what you want/need, you can use …

khadas-vim3: fix stray closing brace in board file khadas-vim3: fix stray closing brace in board file a stray closing brace, meant for the function, that ends up doing the wrong config change View the full article