balbes150

Be sure to redo the cooling system. Your rk3399 is choking and only works on 1\3 of its capabilities. 80 degrees - this is a cutoff (when this temperature is reached, the processor turns on the trottling). If I'm not confused, I read that you can enable the composite and it works with other settings.

Yes, it goes to the core 5.1 adding support for s905x2 and s922

rk3399 without redesigning the cooling system ? See the threads about media script 3399 3328 and there was information about how to configure them to operate the icons on the desktop.

Uploaded to the website alpha versions of images (Armbian and LibreELEC) with kernel 5.1.0-rc1 for Odroid N2.

Yes, after installing the media script will be available full-screen video 4K.

... or you need to wait , or move the mouse ....

Start Armbian and erase /dev/bootloader "dd if=/dev/zero of=/dev/bootloader". After that, the USB Burn Tool should start. In the future, if you don't understand what you're doing, don't take it.

It is a feature of the start of the kernel on the N6.

I recommend adding a fan. It's easy to add (this is one of the reasons I paid attention to this model). The body already has a ready-made large hole. It is necessary to disassemble the body and remove the plug and can be easily placed on top of the fan size 90*90 with USB connection. If you use a smaller fan, you can leave the plug and make a hole of the desired size over the radiator. Check for firmware. Libreelec runs all the hardware. Only the shutdown does not work (the system restarts). I didn't check. Try dtb from other models. The core has basic support for Khadas EDGE (the site has an image). I have a full XFCE desktop running on EDGE (no wifi and BT and sound only). I have long been there, so @amirul was able to run Armbian.

What are these commands you're trying to execute ? I am always amazed by people who do not study anything, do not ask for advice before doing something, and immediately rush to poke everything, and then ask for help. Use USB Burn Tool.

try https://yadi.sk/d/QHmrwhbZ8wRvOA

I will try to add it in the next versions.

Now checked on Odroid C2 an image 5.76 with MALI and a media script, by a technique with replacement of u-boot, as for K2. Everything works fine. After installing the script, the standard browser began to play video 1080 full screen without brakes. MPV is just as easy to handle any full-screen video. Bonus has an in-house sound via HDMI. There is one caveat when configuring - it is necessary to specify the correct DTB option in the file for Odroid C2 "/extlinux/extlinux conf". 1. Copy of the standard u-boot from the working SD card. dd if=/dev/mmcblkXXX of=u-boot_odroid_c2.img bs=1M count=4 2. Burn the image Armbian for TV Boxing on the SD card. 3. Replace u-boot on the recorded SD card dd if=u-boot_odroid_c2.img of=/dev/mmcblk0 conv=fsync bs=1 count=442 dd if=u-boot_odroid_c2.img of=/dev/mmcblk0 conv=fsync bs=512 skip=1 seek=1 4. edit "/extlinux/extlinux conf" p.s. By the way, LibreELEC with the new 5.1 kernel works just as well on Odroid C2.

Now checked on Odroid C2 an image 5.76 with MALI and a media script, by a technique with replacement of u-boot, as for K2. Everything works fine. After installing the script, the standard browser began to play video 1080 full screen without brakes. MPV is just as easy to handle any full-screen video. Bonus has an in-house sound via HDMI. There is one caveat when configuring - it is necessary to specify the correct DTB option in the file for Odroid C2 "/extlinux/extlinux conf". For those who don't know. The browser has a special additional link for a quick test of full-screen video.

Checked work with eMMC of the last variant of an image 20190408 on x96max. eMMC can see, the ddbr utility creates a full copy. I also checked the installation of the latest version of LibreELEC in eMMC, the system was installed in eMMC without problems and works from eMMC.

Please note, this is the first test version, it does not work yet sound from HDMI, WiFi and video acceleration HW. Works wired network, USB sound card and USB WiFi. Video in SW mode surprisingly works in up to 1080p inclusive. https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/606133-linux-images-for-s802-s805-s812-s905-s905x-s912-sd-usb-emmc?p=768370#post768370 New image 20190408 only changes add support BT and eMMC for x96 max (s905x2).

A test image with Mali support and a media script for it are at this link. https://yadi.sk/d/WxYNiTDLz8ILsQ

Yes, follow the description. The recovery option is specially made to save the current partition table.

A new set of images 5.77_20190407 , used by the kernel 5.1.0-rc1. Pay attention, this is a generic image for the entire line of S9xxx (including for S912 and S905x2). Enabled by default DTB for Khadas VIM1 (S905X). To run on other models, you need to configure DTB.

This is a test case, I'm not sure h265 is supported. Look at the list of decoders and try them.

1. Copy of the standard u-boot from the working SD card. dd if=/dev/mmcblkXXX of=u-boot_k2.img bs=1M count=4 2. Burn the image Armbian for TV Boxing on the SD card. 3. Replace u-boot on the recorded SD card dd if=u-boot_k2.img of=/dev/mmcblk0 conv=fsync bs=1 count=442 dd if=u-boot_k2.img of=/dev/mmcblk0 conv=fsync bs=512 skip=1 seek=1 Configure the correct DTB for K2. If you have u-boot-2018\19 , then in the file "/extlinux/extlinux.conf". If u-boot is different, show its version.

For what purpose do you need a cluster ?

This topic discusses images for TV boxes. But it would be interesting to test them on K2. Are you ready to try this option ?

See the specified theme, there is a link to the site yandexdisk, it has a directory with version 5.77 with the corresponding subdirectories for S905X2.