balbes150

StarFive (v1) No, I don't have V2 (VisionFive2\Star Five 2), so I don't plan any work on adding support for V2.

Hmm, I have not seen mecotronics models with rk3588 in a plastic case and without an SD card. Show a photo of the device or a link to it. https://www.cnx-software.com/2022/05/12/mekotronics-r58-is-a-cost-optimized-rockchip-rk3588-sbc/

ver 20221127 for Starfive kernel 6.1.0-rc4

USB-DVB ? These headers will obviously not work with the 5.10.110 kernel. Use the old 5.10.66 kernel and its headers (station-m3-5.10.66)

This does not work on version 5.10.110. I don't plan to spend a lot of time debugging this mode on an old BSP 5.10 kernel.

As far as I know, everyone has an SD card. What model are we talking about ?

My HDMI output works without problems. I checked several TV\monitors in 1080p mode. I am interested in which monitor you are using. Are you writing about USB 3 - meaning USB-C in DP mode for output to the monitor? Which HDMI cable do you use?

Which version of the system image are you using (full name\link)?

Other source code (for details, see the rockchip website). So that there is no overlap on the previous kernel. Where is the output connected ? What device ?

Ver 20221125 kernel 5.10.110

There are no problems with audio devices on T4. It was enough just to open Volume Control (on the panel XFCE) and choose which device to output sound through. Started playback, opened Volume control and selected in the drop-down list what to use for audio output.

https://bbs.stationpc.com/forum.php?mod=viewthread&tid=354&extra=page%3D1%26filter%3Dauthor%26orderby%3Dlastpost

All versions (Station M2\P2\M3) with LEGACY kernel cannot run DE. The reason is the incompatibility of the 3D packages and the legacy kernel. Fixing this bug #4467

fix #4465

You don't have to keep track of anything. I ran the build from the official GIT Master and the build went correctly (DTB files are included and work correctly). It's just not clear why the RC image was obtained without DTB.

I haven't done PR for M3 for a long time. Therefore, I was surprised why the build worked incorrectly (without DTB).

I cloned the last MASTER, built an image for Station M3, checked, DTB is available, everything works. It is strange why there is no DTB in the RC image, perhaps it is assembled from "old" packages from the repository (there is no package with DTB)? At the same time, I checked the build of a variant with integrated DTB in the kernel package. Everything works. I can send a PR with patch fixes for a new version of the core package for M3 with one package for the core and DTB (just as it is implemented for the "media" core).

Firefly-rk3399 - works

Jetson Nano core 5.19 is working, core 6.0 is non-working (this problem has been present for a long time, there are no solutions yet).

#4462

Station M3 - There are no DTB files in the image. Which branch of the official GIT do I need to check (which branch is used to build RC)? Is this it? https://github.com/armbian/build/tree/v22.11

I tried to fill in this form, it is overloaded. It is enough to do - the device name, image, switch works \does not work (free format text field (if it works, filling is not required). For those who want to fill in extended information - add a switch that will open additional fields (for those who want to fill them in). Station P1 - works Station M1 - u-boot is not working properly, there will be a fix in the near future

https://www.armbian.com/station-m3/

In the near future, M3 will be added to the download page.

judging by the logs, it is not defined at all. You can try to completely disconnect the device from all connections (HDMi\LAN\power\UART putc) and turn it off for a couple of days. It's not a fact that this will help, but there is a chance that during the experiments you "drove" your device into a "contradictory mode" and its "rest" from power will reset to its original state.