balbes150

@hexdump @PiotrO Can you for verification try to run any of my latest Armbian image for AW ? I am interested in such launch options. 1. The original state (after recording what not to change). 2. Add your DTB and write it in (extlinux.conf). 3. Replace u-boot with yours.

Looks like for my eachlink H6 model (not mini), need another u-boot. None of the tested variants did not produce results. Android starts. When you connect the SD card, there is no launch of Android (so there is an appeal to the SD card). On TX6 if is used not the right DTB, there is modicum any message, and here full silence. Without UART it is not clear what is happening. I tried to connect UART, but there is no output to the console at all. On infe in Internet, on this model there is no full-fledged UART, lacks parts of details.

If you have an opportunity, it is better to throw off also your variant of u-boot, I will try to compare their work on the my models.

Need DTB.

Good news. Ready image 20191222 for Allwinner H6 (tested on Tanix TX6) which runs almost all the equipment except the built-in WiFi (works USB Wifi). While this is not a universal image for all models RK + AML+AW, but there is a prospect of refinement and obtaining a full universal version for these platforms (taking into account the personal settings of u-boot and DTB for each platform). https://yadi.sk/d/GJbDt3-FjQ-dQA

Took "clean" config from LE and built Armbian with It (version 20191222). Now the wired network works. Perhaps when using the universal kernel config, some options are not in the state that would ensure the operation of a wired network. @hexdump @PiotrO Can you drop me a copy of the u-boot and dtb you use for Eachlink H6 ? For u-boot, you can simply make a copy of the DD - 4M from your working SD card.

The new kernels themselves determine the actual memory size. Most likely you have a model with 1 GB of real memory. Open the case and check the actual memory size. "rc1" is a test kernel that may be missing some functions

Build the first version of Armbian 20191221 19.11.4 kernel 5.5.0-rc2 for Allwinner H6 (Tanix TX6). The system normally starts from the SD card. Works sound and USB devices (BT WiFi USB media etc), but there is a serious drawback until the wired network works. I have not yet figured out the reason why the wired network does not work, so I publish only two test images of Ubuntu and Debian, for a General assessment of the health of the system on Tanix TX6. https://yadi.sk/d/GJbDt3-FjQ-dQA With appropriate configuration, this version can be used on other platforms RK and AML. On RK and AML everything works as in the previous images. I pay attention, for those who used these images on RK3399 from SD card, it is necessary to add correct u-boot. In these images, u-boot and settings for Allwinner h6 Tanix TX6 are enabled by default.

Tnx. I'll try to use it.

Ok Yes, I used these developments to create my (I added the familiar features I use in all other LE builds) Le variant for Tanix TX6 https://yadi.sk/d/GJbDt3-FjQ-dQA I use these sources to create a version of Armbian (I'm currently testing the first alpha version of the image Armbian on TX6). @hexdump I don't have a UART console on the TX6 (I haven't found how to connect it to this model). Can you show UART console output from your h6 model if you write only u-boot to SD card (no system) ? Did I understand correctly that you have an Eachlink H6 model ? And do you have a u-boot file for this model ?

The answer to @NicoD question. The latest universal images include all the necessary files to enable color correction on g12. Additionally, I downloaded the patch files to run from the SD card and from USB media. https://yadi.sk/d/34zrTk5iEsfqhg

New image 20191216 kernel 5.3 for rk3328

So same recommend to study this subject, there there are many answers on different questions specifically on versions of Armbian, which here are discussed.

Restore via USB Burn Tool regular firmware and re-activate the universal multi-boot.

For many older u-boot (which are used in s905) there is no possibility to install in eMMC. Their u-boot does not support this feature. I have a workaround for Telos models with the s905 chip, but it hasn't been tested yet and may not work on other devices.

This has been discussed many times, you have a bad media or card reader problem.

New version of universal images 20191219. I pay attention, the name of images has changed, now they are called "arm-64". The installation order in eMMC has changed. Now you need to use the correct platform-specific script to install in eMMC. There are three scripts for each platform. "install-rk3399.sh" "install-rk3328.sh" "install-aml.sh". New installation scripts may have errors. Attention. There is no support for automatic installation of color correction when installed in eMMC for g12 yet. This must be done manually.

Sorry, I just now saw the messages for me (I was on vacation when these messages were written and missed them). I have now started preparing to run Armbian on H6 and discovered these messages. Launch Armbian on TV box H6 still someone interestingly ?

You forgot to add the file "u-boot.ext"

Update version 20191218 kernel 5.5. Fixed support for sound on g12 platform. now the sound works as usual, after removing pulseaudio and running the script "g12_sound.sh".

Show the file (.config), which you use when building kernel 5