balbes150

Thank you, you gave me 10 minutes of laughter. RPi is not able to even compete with normal TV boxes. His destiny, the competition with clone stuff and fakes. The real price of the RPI 4 kit , which will be comparable to the average TV box starts from 70-80. This is a naive tale for losers that RPi 4 is cheap, designed for those who do not know how to count elementary.

The core is the same, there is no need for you to upgrade. Added NEXT 5.2-rc7 images. When used on s905x2\s922, all DTB variants for the g12 must be checked.

New image ver 5.90

Does this model have a WiFi\BT antenna ? Tests have shown that without a good cooling system, this device can not be used. See the on CNX, there are tests and results.

yes

Try all the options dtb g12* Restore the firmware and re-activate the multi-boot. Existing DTBS in the image are not suitable for your model. You will have to pull out the DTB from the Android firmware and try to make it a working dtb (convert to DTS and compare with existing ones).

New image 5.89

The new version 5.89_20190627. It fixes wired networking on EDGE-V v13 models.

What would "think" need UART logs and content (uEnv.ini) .

Describe in detail the tasks that the TV box will solve.

or install all the necessary systems (Win Debian Ubuntu etc) together and select the desired system when you turn on your PC. This is much better than using virtual versions. By the way, if you already have Win10 installed, you can install Debian and Ubuntu on your PC.

The performance of RK3399 is very good and if you do not play Windows games, it is able to replace the average home PC with Linux. Even without the addition of HW support for full-screen video, (in SW mode) the rk3399 works seamlessly with the 1080 desktop in all modes and without brakes. Conclusion about the unsuitability rk3399 Linux - sheer stupidity or intentional deception. But it is important to understand that to get all the performance of this powerful processor, it and the whole system needs a good cooling system and a good medium (the device from which the system starts). Only in this case rk3399 will be able to show all his abilities. For example , you can take a shitty SD card and then yell that the system is slow compared to the Android system that is run from eMMC. Or use a bad cooling system. The main disadvantage rk3399 , it is a heat at work, but with the release of rk3588 is significantly change.

1. Part of the memory is reserved for device maintenance. The available 3.5 GB is the normal value for systems with 4 GB. To change the service memory reserves, you need to change the DTS. Details been discussed several times in this thread and in the subject of the old kernel (5.44). 2. Now all g12 (s905x2\s922) operate at the same frequency 1.2. They do not change at work. 3. Work on the addition of all functions is underway. The exact timing no one knows. You do not have /dev/mmcblk1 devices. Check what devices you have and change the value in the script "install.sh" in the real name of your eMMC. Maybe your eMMC is "/dev/mmcblk2" or "/dev/mmcblk0" . It is not needed and has not been used for a long time. All include in the script "install.sh"

The core does not yet have temperature and frequency control functions. For S905X2 I have enough radiator size 30*30*10mm (with the free passage of air).

The new version of the image 5.89_20190621 for S905X2 and S922 with kernel 5.2. This version can be used on all s9xxx, but on s905\s912 sound will not work.

New Image for N2 + u-boot-2019

The new version of 5.89. Pay attention to the Odroid N2 in these images there is a new u-boot-2019. When running from SD card in u-boot "mmc" switch mode, the "boot.ini" script will no longer work. All settings are made only through the standard file "extlinux.conf". Current file "boot.ini" is used only when the system is started using a modified u-boot in SPI.

Can now add an Armbian image Assembly for TX6. https://forum.libreelec.tv/thread/17636-tanix-tx6/?postID=121128#post121128

For S905X without HW support, the browser can play full screen YouTube video with 720p desktop resolution. This information is in this topic (description of system startup and installation in eMMC). For use with video, you can use Armbian with the optional HW acceleration script. Information about this version of there is in this topic previously (version of DEV with mali). I don't have that kind of equipment. I don't know if it will work or not with Armbian and Libreelec. I'm not dev Coreelec have no idea how well it works or not. I have not tested such modes of operation.

Kernel 5 is discussed in another topic.

Placing the radiator from the bottom, the stupidest decision.

Kernel 3.14 is deprecated and is no longer supported. Therefore, there will be no more changes or new images with this kernel.

New image Armbian 5.88 and LibreELEC for Khadas EDGE

Each variant of the system has its own set of commands that do this. If you're into Gentoo, try asking in this thread. https://forums.gentoo.org/viewtopic-t-1055606.html

In the repository Disсo until the worker LIGHTDM, so you have to use the NODM.