-
Posts
69 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Maker39
-
-
11.12.2022 в 11:27, jock сказал:
I suggest to you to run armbian on sdcard and do some tests with rk322x-config.
You need to try the various combinations from the eMMC section
* don't set any options
https://paste.armbian.com/nuquzizino
* emmc-pins alone
https://paste.armbian.com/ravorodada
* emmc-pins + emmc-ddr-ph45
https://paste.armbian.com/didajaqeko
* emmc-pins + emmc-ddr-ph180
https://paste.armbian.com/yiqutaxaqi
* emmc-pins + emmc-hs200
only "Install/update bootloader on SD/eMMC" option available -
2 часа назад, jock сказал:
apt update && apt upgrade
Wow !!! it's magic !
I have WiFi
-
@jockled-con6 is selected
armbianmonitor -u uploaded to http://ix.io/4ilG
Tests with rk322x-config i can do it later
-
-
@jockI try many images, last loaded Armbian 23.02.0-trunk Kinetic with Linux 6.0.11-rk322x
dmesg after armbian-install
[ 239.317263] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 2343750Hz, actual 2343750HZ div = 0)
[ 239.392916] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 239.396109] I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[ 239.413523] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write
[ 245.431404] ext3: Unknown parameter 'compress-force'
[ 245.446842] ext4: Unknown parameter 'compress-force'
[ 245.479972] /dev/mmcblk2p1: Can't open blockdev
[ 245.515559] /dev/mmcblk2p1: Can't open blockdev -
I have another board , marking MXQPRO_V72,
SOC RK3228A,
eMMC H9TQ65A8GTMC,
WiFi ESP8089
Boot well from SD card (Multitool and Armbian image written to the card). But when writing an image to eMMC using MULTITOOL, it does not boot.
Also Armbian-config and Armbian-install are not executed due to lack of space.
Also WiFi ESP8089 is not seen in the system booted from SD card.
What could I have done wrong?
-
-
thanks, jock
From armbian-config i did it :
source_install
headers_install
Now i have in /usr/src
linux-headers-5.10.60-rk322x
linux-source-5.10.60-rk322x
But how to proceed further to get the required kernel module I did not find in GOOGLE
my skill in linux is <=1
-
Hello Jock !
I need to connect i2c-tiny-usb. As far as I understand, this requires an appropriate kernel module.
modprobe i2c-tiny-usb responds :
modprobe: FATAL: Module i2c-tiny-usb not found in directory /lib/modules/4.4.194
Do I need to rebuild the firmware myself with the necessary modules or is there some one already compiled?
-
@zero48, With people like @jock and @fabiobassa , this board couldn't win this fight
Congratulations on your success
I was rooting for you, but nothing could help
-
12 минут назад, jock сказал:
I don't understand what's wrong with your setup, but did you decompress the multitool (that's its name), as suggested by @fabiobassa before burning on the sdcard? If you are burning the .xz archive as is it will certainly never work!
Rufus does a great job with img.xz files. Checked more than once.
-
I would do like this:
1. through Rufus completely format SD by disabling "Quick format"
2. Write Multitool.img.xz .
After that, in Win, the card should be seen as 2GB FAT32 with some files, such as:
/backups
/bsp
/extlinux
/images
kernel.img
LICENSE
rk322x-box.dtb
3. Insert "Multitool" SD on box and PowerON.
Should be boot and repartition FAT32 for whole space.
p.s. Is there Android 10 in your box? Maybe there the bootloader somehow works differently?
-
1 час назад, zero48 сказал:
Once I flash the imagetool with balena I cant read it anymore, I have tried with 2 other SD (16B and 4GB) cards and even an USB (16GB) .
In another hands I think the boot process of the box is affected.
The only thing I get is this when I press the Hidden button https://drive.google.com/file/d/1Skrgy_xKlxgWpjPLNhPxhz-ZASmFdeli/view?usp=sharing
I got 4 units from a friend all same model , same behavior.
I do thanks you guys for the support , I'll get it eventually.
Any SD formating tool for windows besides the WIN10 format tool ?
Zero48
Try Rufus https://rufus.ie/
I always keep "Rufus", "Win32 Disk Imager" and "HP USB Disk Storage Format Tool" handy for recording images.
And you no need press "magic button" for boot with Multitool .
-
to @rna
I repeated all the previous steps for myself.
I am working in WinXP.
1. Recorded 2 MMC cards via Win32 disk imager and Rufus-usb-2-12.
2. I inserted the card into the slot of the TV box and applied power without touching RESET.
Both cards took turns loading Armbian without any problems.
Maybe you still have a different board?
For example eMMC but not NAND like mine?
-
hi
I boot from MMC card without any problem.
-
As I already wrote, I have a box with a faulty sv6051.
There is also a similar board with rtl8703bs (these boards have two slots for wifi).
I got two rtl8723cs chips (according to scant information from the Internet rtl8703bs and
rtl8723cs pin to pin compatible).
Since Armbian uses the 8723cs driver for rtl8703bs, I hoped that i simply replace thechip and there will be happiness. But that did not happen.
The chip is not initialized and is not visible to the system.
After modprobe 8723cs in dmesg[246133.282423] ======================================================= [246133.282450] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [246133.282467] ======================================================= [246133.282487] Realtek 8723CS SDIO WiFi driver (Powered by Rockchip,Ver v5.2.1.7_25082.20171108_COEX20170626-1a00_wifi_hal) init. [246133.282513] [WLAN_RFKILL]: rockchip_wifi_power: 1 [246133.282533] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Successful initialized [246133.282548] mmc1:mmc host rescan start! [246133.282561] RTW: module init start [246133.282576] RTW: rtl8723cs v5.2.1.7_25082.20171108_COEX20170626-1a00_wifi_hal [246133.282594] RTW: build time: Apr 26 2020 14:01:30 [246133.282623] RTW: rtl8723cs BT-Coex version = COEX20170626-1a00 [246133.282800] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [246133.282830] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
I rechecked the soldering and the environment (everything is as on the working board with
8703bs)
It may be that for the 8723cs to work in Armbian, some other manipulations are needed atthe level firmware or drivers?
-
Congratulations on moving to CSC status.
What do you think, can I already delete old images with the LE bootloader?
You did a great thing with such a large "zoo" of devices on rk322x that I think these firmwares have already lost relevance.
-
What about the transfer of Armbian from SD to NAND?
Is it possible?
Is it worth it?
Or is it worth removing NAND and soldering eMMC?
-
On 4/20/2020 at 11:25 AM, Ernest Kusa said:
OK, I compiled new image for Sunvell R69
Armbian_20.05.0-trunk_Sunvell-r69_buster_current_5.4.33_minimal
- Installation/flashing to internal emmc via armbian-config works fine- 2 x USB works
- Analog audio device is detected but I can't get any sound, maybe my unit is broken or I'm doing something wrong (feedback needed)- Working IR, WiFi and ethernet
- Default password (root/1234)https://mega.nz/file/4ugAhKjb#NIt6KIv2tsPFzVVGwLcykFSdQp0MgCXgdCzxcj0PUxA
Great job!
Thanks to you I finally have a working image for my MXq-4k ,
PCB silkscreen : MXQ-S-V3.0-20180126 ZN
Hw: Allwinner H3, 1G DDR3, 8G NAND, XR819
XR819 work
All 4 USB enable from armbian-config
cpufreq is working.
Because i have NAND system transfer to eMMC does not work ...
-
-
ssv6051 blacklicsted on /etc/modprobe.d/blacklist-rk322x-box.conf for rk322x-box remove and reboot
-
59 minutes ago, Alex83 said:
I got the same message:
root@rk322x-box:~# cat "/sys/bus/mmc/devices/mmc1:0001/mmc1:0001:1/modalias" cat: '/sys/bus/mmc/devices/mmc1:0001/mmc1:0001:1/modalias': No such file or directory
I got this after WIFI chip fully dead (confirmed by loading factory Android).
IMHO this may indicate that the system does not see the sdio device.
What kind of WIFI module do you have on board ?
-
I think me out of game
When trying to copy a 2GB file via WIFI, at first the speed dropped to 20Kb/s and the box with ssv6051 drop out connect.
No firmware now helps. Armbian starts but ssv6051 is no longer available.
root@rk322x-box:~# cat "/sys/bus/mmc/devices/mmc1:0001/mmc1:0001:1/modalias" cat: '/sys/bus/mmc/devices/mmc1:0001/mmc1:0001:1/modalias': No such file or directory
I'll try later to flash the factory android, but it seems to me it will not help
-
Wifi rtl8703bs
root@rk322x-box:~# cat "/sys/bus/mmc/devices/mmc1:0001/mmc1:0001:1/modalias"
sdio:c07v024CdB703
ps Here's another, it may come in handyrtl8189etv
sdio:c07v024Cd8179
ssv6051sdio:c07v3030d3030
CSC Armbian for RK322x TV box boards
in Rockchip CPU Boxes
Posted
No
dmesg after armbian-install
[ 103.467966] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3)
[ 103.528295] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 103.532463] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 103.532582] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write
dmesg after armbian config/... boot from eMMC-system on eMMC
[ 81.469807] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3)
[ 81.530225] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 81.534394] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 81.534484] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write
[ 81.842872] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0
[ 81.842943] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write
[ 81.843012] Buffer I/O error on dev mmcblk2, logical block 1, lost async page write
[ 81.843031] Buffer I/O error on dev mmcblk2, logical block 2, lost async page write
[ 81.843230] blk_update_request: I/O error, dev mmcblk2, sector 15269864 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0
[ 81.843250] Buffer I/O error on dev mmcblk2, logical block 1908733, lost async page write
[ 81.843278] Buffer I/O error on dev mmcblk2, logical block 1908734, lost async page write
[ 81.843293] Buffer I/O error on dev mmcblk2, logical block 1908735, lost async page write
[ 81.858078] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[ 81.858149] Buffer I/O error on dev mmcblk2, logical block 0,