Search the Community

Have anyone succeeded in installing qmake on OrangePi PC?

I am a relatively new Linux user and I currently have a orange pi PC. There are some games not in the official repository I would like to compile. When I do so could I add them to the repository here?

Hi Is docker supposed to run on OrangePi PC with Armbian 5.11? How about DM Thin below? BR Anders anders@orangepi1:~/bin$ sudo systemctl -l status docker â— docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled) Active: failed (Result: exit-code) since Fri 2016-06-03 17:48:47 CEST; 14min ago Docs: https://docs.docker.com Process: 571 ExecStart=/usr/bin/docker daemon -H fd:// (code=exited, status=1/FAILURE) Main PID: 571 (code=exited, status=1/FAILURE) Jun 03 17:48:44 orangepi1 systemd[1]: Starting Docker Application Container Engine... Jun 03 17:48:46 orangepi1 docker[571]: time="2016-06-03T17:48:46.226560211+02:00" level=info msg="New containerd process, pid: 692\n" Jun 03 17:48:47 orangepi1 docker[571]: time="2016-06-03T17:48:47.264771762+02:00" level=warning msg="Your Linux kernel version 3.4.112-sun8i can be unstable running docker. Please upgrade your kernel to 3.10.0." Jun 03 17:48:47 orangepi1 docker[571]: time="2016-06-03T17:48:47.386711582+02:00" level=fatal msg="Error starting daemon: error initializing graphdriver: devicemapper: Error running deviceCreate (CreatePool) dm_task_run failed" Jun 03 17:48:47 orangepi1 systemd[1]: docker.service: main process exited, code=exited, status=1/FAILURE Jun 03 17:48:47 orangepi1 docker[571]: time="2016-06-03T17:48:47+02:00" level=info msg="stopping containerd after receiving terminated" Jun 03 17:48:47 orangepi1 systemd[1]: Failed to start Docker Application Container Engine. Jun 03 17:48:47 orangepi1 systemd[1]: Unit docker.service entered failed state. anders@orangepi1:~/bin$ ./check-config.sh info: reading kernel config from /proc/config.gz ... Generally Necessary: - cgroup hierarchy: properly mounted [/sys/fs/cgroup] - CONFIG_NAMESPACES: enabled - CONFIG_NET_NS: enabled - CONFIG_PID_NS: enabled - CONFIG_IPC_NS: enabled - CONFIG_UTS_NS: enabled - CONFIG_DEVPTS_MULTIPLE_INSTANCES: enabled - CONFIG_CGROUPS: enabled - CONFIG_CGROUP_CPUACCT: enabled - CONFIG_CGROUP_DEVICE: enabled - CONFIG_CGROUP_FREEZER: enabled - CONFIG_CGROUP_SCHED: enabled - CONFIG_CPUSETS: enabled - CONFIG_MEMCG: missing - CONFIG_KEYS: enabled - CONFIG_MACVLAN: enabled (as module) - CONFIG_VETH: enabled (as module) - CONFIG_BRIDGE: enabled (as module) - CONFIG_BRIDGE_NETFILTER: enabled - CONFIG_NF_NAT_IPV4: missing - CONFIG_IP_NF_FILTER: enabled (as module) - CONFIG_IP_NF_TARGET_MASQUERADE: enabled (as module) - CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled (as module) - CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled (as module) - CONFIG_NF_NAT: enabled (as module) - CONFIG_NF_NAT_NEEDED: enabled - CONFIG_POSIX_MQUEUE: enabled Optional Features: - CONFIG_USER_NS: enabled - CONFIG_SECCOMP: missing - CONFIG_CGROUP_PIDS: missing - CONFIG_MEMCG_SWAP: missing - CONFIG_MEMCG_SWAP_ENABLED: missing - CONFIG_MEMCG_KMEM: missing - CONFIG_RESOURCE_COUNTERS: enabled - CONFIG_BLK_CGROUP: enabled - CONFIG_BLK_DEV_THROTTLING: missing - CONFIG_IOSCHED_CFQ: enabled - CONFIG_CFQ_GROUP_IOSCHED: missing - CONFIG_CGROUP_PERF: enabled - CONFIG_CGROUP_HUGETLB: missing - CONFIG_NET_CLS_CGROUP: missing - CONFIG_NETPRIO_CGROUP: missing - CONFIG_CFS_BANDWIDTH: missing - CONFIG_FAIR_GROUP_SCHED: enabled - CONFIG_RT_GROUP_SCHED: enabled - CONFIG_EXT3_FS: missing - CONFIG_EXT3_FS_XATTR: missing - CONFIG_EXT3_FS_POSIX_ACL: missing - CONFIG_EXT3_FS_SECURITY: missing (enable these ext3 configs if you are using ext3 as backing filesystem) - CONFIG_EXT4_FS: enabled - CONFIG_EXT4_FS_POSIX_ACL: enabled - CONFIG_EXT4_FS_SECURITY: enabled - Network Drivers: - "overlay": - CONFIG_VXLAN: missing - Storage Drivers: - "aufs": - CONFIG_AUFS_FS: missing - "btrfs": - CONFIG_BTRFS_FS: enabled - "devicemapper": - CONFIG_BLK_DEV_DM: enabled - CONFIG_DM_THIN_PROVISIONING: missing - "overlay": - CONFIG_OVERLAY_FS: missing - "zfs": - /dev/zfs: missing - zfs command: missing - zpool command: missing Limits: - /proc/sys/kernel/keys/root_maxkeys: 1000000 anders@orangepi1:~/bin$ uname -a Linux orangepi1 3.4.112-sun8i #8 SMP PREEMPT Tue May 31 19:00:17 CEST 2016 armv7l GNU/Linux anders@orangepi1:~/bin$ uname -a Linux orangepi1 3.4.112-sun8i #8 SMP PREEMPT Tue May 31 19:00:17 CEST 2016 armv7l GNU/Linux anders@orangepi1:~/bin$ dpkg -l | grep orange ii linux-jessie-root-orangepih3 5.11 armhf Root file system tweaks for orangepih3 ii linux-u-boot-orangepih3-default 5.11 armhf Uboot loader 2016.05 anders@orangepi1:~/bin$ dpkg -l | grep docker rc docker 1.5-1 armhf System tray for KDE3/GNOME2 docklet applications iF docker-hypriot 1.11.1-1 armhf Docker: the open-source application container engine

Hi! I'm using a mosfet to control a fan based on temperature on my opipc, but now it just turns on and off. I'd like to control the rpm with pwm, but I cannot use any of the pins with wiringop :S I read on an other forum that the h3 has only one pwm, but which one is the pwm pin, and how could I use it? Thanks in advance!

Hello, I'm new to SBC and have to fire my newly received Orange Pi PC. Should a Vanilla kernel download be soon available, or is it adviced to go to the legacy one? I would be happy to know, in order to start my project on a base that would not need to big modifications for the coming monthes. Best regards, JMF

I've noticed that Armbian builds are taking a really long time to power up on Orange Pi PC and Orange Pi One. Is there some way I can see what's going on in the bootloader that's causing these long delays? Also, if I run apt-get dist-upgrade and take the latest kernel, it never boots after that point. I think something's wrong with the boot sector (or whatever it is) that is written/updated on the SDCard. The Orange Pi power LEDs don't light up until the bootloader successfully finds an OS on the SDCard. All of the builds over at orangepi.org work just fine but the Armbian ones aren't working right. I'm using a diverse collection of very high-quality SDCards from different manufacturers. Any thoughts? Thanks in advance.

I'm buying WiFi Dongle RTL8188 and want create WiFi AdHoc (WEP) connect PC<->OrangePi PC HowTo settings on Armbian? i'm install sudo apt install network-manager-gnome after try connect to wifi adhoc (WEP) from network-manager (nm-applet), show error: (32) Not authorized to control networking My settings: userous@orangepipc:~$ groups userous dialout sudo audio video plugdev netdev cat /etc/network/interfaces auto lo iface lo inet loopback

Running apt-get dist-upgrade tries to install the new Allwinner H3 kernel but it takes the Orange Pi PC a really, really long time to extract and install it. The heartbeat LED flashed really fast and after 30 minutes I elected to stop it. Has anyone succeeded doing apt-get dist-upgrade today to get the new kernel on the Orange Pi PC or Orange Pi One, and, if so, how long did it take? The packages are: linux-firmware-image-sun8i linux-headers-sun8i linux-image-sun8i linux-jessie-root-orangepih3 linux-u-boot-orangepih3-default Thanks in advance for any information or advice.

We try to set up lirc on opi pc, but only receive works fine, any idea how to set it up to work in both modes - transmit and receive?

if anyone is interested https://github.com/igorpecovnik/lib/issues/311

Goodmorning, I've upgraded my Orange Pi-PC to 5.11 Upgrading process OK then rebooted. Now PI continue rebooting (leds turn on as usual but after a while they turn off) and i'm not able to access it. Have you any advice? is there a way to reset it? thanks in advance

Hi, I am developing application that will show graphics in console mode using frame buffer access in system with Orange Pi PC board. Several Debian images I tried until now from Orange Pi downloads always set up 32bpp frame buffer. Calling 'fbset -depth 16' causes screen corruption. Changing script.bin setting (fb0_format = 5) did no change. Any suggestion?

Hi. My board is Orangepi-PC Allwinner H3. I had wifi-dongle-usb problem.. so i used armbian.. I was download Image here http://www.armbian.com/orange-pi-one. I confirm wifi dongle is working! But Uart3 in not working.. I need uart3 for Bluetooth module.. I can't find ttyS3 in /dev/.. so i used source at https://github.com/igorpecovnik/lib I built two image.. -> Armbian_5.11_Orangepipc_Debian_jessie_4.6.0_desktop -> Armbian_5.11_Orangepipc_Debian_jessie_4.6.0 but both not working... I can see green led but i can't connect ssh... and cant' show console by monitor.. How can i do? Please help. Thanks.

opi pc arm 5.10 ALSA no output from speakers but output only available through hdmi. when installed pulse audio able get and change audio hdmi to analog but when switched to HDMI playback hangs and freezes. Any solution?

My cursor in console (not desktop environment) disappeared after apt upgrade from a clean install. Device : orange pi pc Version: ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i I also changed led triggers red one to mmc0 and green to timer. I run apt list>aptlist.txt and attach result to post. it changed a lot i install further packages. aptlist.txt

I try to use acl but I failed to remount file system with acl if seams kernel compiled with disabled acl for ext filesystem. my fstab config: # UNCONFIGURED FSTAB FOR BASE SYSTEM tmpfs /tmp tmpfs nodev,nosuid,size=256M 0 0 /dev/mmcblk0p1 / ext4 acl,defaults,noatime,nodiratime,data=writeback,commit=600,errors=remount-ro 0 0 /var/swap none swap sw 0 0 and my check for acl in kernel config: root@orangepipc:~# cat /boot/config-3.4.112-sun8i | grep _ACL # CONFIG_EXT4_FS_POSIX_ACL is not set CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_FS_POSIX_ACL=y CONFIG_GENERIC_ACL=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_NFS_V3_ACL=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3_ACL=y CONFIG_NFS_ACL_SUPPORT=y It seams the analog audio out put dos't work too, I can't test it with speaker-test. It would be a great favor to recompile kernel with acl for ext4 and guide me about audio out put.

Verify kernel 4.6 with dev on test construction Armbian where the CPU is not recognized correctly. root@orangepipc:~# lscpu Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0 Off-line CPU(s) list: 1-3 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 1 Model name: ARMv7 Processor rev 5 (v7l) [ 0.001455] CPU: Testing write buffer coherency: ok [ 0.001769] /cpus/cpu@0 missing clock-frequency property [ 0.001784] /cpus/cpu@1 missing clock-frequency property [ 0.001794] /cpus/cpu@2 missing clock-frequency property [ 0.001805] /cpus/cpu@3 missing clock-frequency property [ 0.001815] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001867] Setting up static identity map for 0x40100000 - 0x40100058 [ 0.003909] Brought up 1 CPUs [ 0.003924] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.003931] CPU: All CPU(s) started in SVC mode. This is what Armbian modification which managed to do? Or it should be reported somewhere? My best regards.

Hi guys, I received 5pcs of Orange Pi PC recently. I prepared system for all of them based on 3.4.xxx kernel Jessie sever image. Every board with only wifi connection I cannot reach on network. I have started investigating problem and these Realtek dongles are showing up like 2 devices wlan0 wlan1. Wpa supplicant driver crashed during boot and there is some strange message in startup log about usb. I am at work now so I cannot post it but on development version I tested this morning is that wifi dongle working and successfully connected to network. Sent from my Redmi Note 2 using Tapatalk

Thanks for the hard work on Armbian. I finally got the EmulationStation GUI to run under OpenGL ES @ ~88fps on OrangePI PC. The trick was mostly building SDL2 from source and not installing it with apt-get per the instructions. Really want to avoid anything "mesa". IIRC, I configured SDL2 with a similar command before making: ./configure --host=arm-linux-gnueabihf --disable-video-opengl Then building EmulationStation from source using: cmake -DGLSystem=OpenGL\ ES . make make install FWIW I did symlink some shared objects into /usr/lib/ (like libMali.so) Next is sorting out libretro stuff.

Hi all, I upgraded my jessie 5.05 desktop version for Orange Pi PC via "apt-get upgrade" to 5.10 without any issues. Now I noticed that the green status LED blinks twice every ~0.5s after first reboot. Can anyone figure out the meaning of this?? Thanks in advance.

Anyone using any of those cheap bluetooth dongles? I have been trying to get it working but when connecting it freezes the OPi PC (the heartbeat led stops blinkng). The dongle is fine as it works on other Linux and Windows computers. This is the lsusb output: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 14b2:3c22 Ralink Technology, Corp. Conceptronic C54RU v3 802.11bg Wireless Adapter [Ralink RT2571W] Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It seems that no matter what usb port I use it's detected as usb 1.1 device, so maybe this is why it fails? As it freezes the board there is not any relevant log saved.: 694, stack limit = 0xee1c42f8) Today after pairing a device, I received the "sunxi oops" attached as output on bluetoothctl, it didn't froze the board as the led was still blinking but it was unresponsive and lost the network connection. Any idea what's producing this? I think it could be the btusb driver because on 3.4 kernel it had some CSR dongles blacklisted. sunxioops.txt

TKaiser. If you install the Desktop version of Armbian 5.10 then the following list of codecs (containing h.265 with 8 bit but not 10 bit!) is available for HW accelerated decoding: http://linux-sunxi.o...ed_codec_matrix Is 8 Bit versus 10 Bit a limitation. Can the Orange Pi PC with Armbian 1.10 decode all HEVC 8 or 10 bit encoding to 8 bit decoding, or can it ONLY do 8bit encoded to 8 bit decoding? Seasalt

Hi, ALL! Have anybody success story with an Armbian and Kodi? With Armbains 5.05...5.10 I installed (apt-get update ; apt-get install kodi) kodi 15.2 from this repository: Quote as described here and allways (in all Armbian releases) has a problems with a sound: sound level very low ans high level noise starting even no video - beginning while kodi GUI started (permanent noise in menus). Film sound also exists while film started playing, but sound level near noise level and very low both (btw, kodi volume regulator not working, only mute mode working in kodi). I watched AC3, MP3, AAC sound coded films - effects are the same: noise with low volume soundtrack. All sound codecs are exists. Interesting fact: "from_the_box" aplications sound are OK (but they are uncomfortable), problem with a Kody only. If exists working howto about Armbian and Kodi - please share it.

hi all, My Orange Pi PC here: uname -a Linux orangepipc 3.4.112-sun8i #30 SMP PREEMPT Sat Apr 30 19:49:10 CEST 2016 armv7l GNU/Linux and dmeg like this [ 1.017014] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.017964] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.018158] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.018174] [DAUDIO0] driver not init,just return. [ 1.021480] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok and I check status of ALSA lib # systemctl status alsa-state.service ◠alsa-state.service - Manage Sound Card State (restore and store) Loaded: loaded (/lib/systemd/system/alsa-state.service; static) Active: active (running) since Sun 2016-05-08 23:09:42 ICT; 11h ago Main PID: 453 (alsactl) CGroup: /system.slice/alsa-state.service └─453 /usr/sbin/alsactl -E HOME=/var/run/alsa -s -n 19 -c rdaemon May 08 23:09:42 orangepipc alsactl[453]: alsactl 1.0.28 daemon started May 08 23:09:42 orangepipc systemd[1]: Started Manage Sound Card State (restore and store). May 08 23:09:42 orangepipc alsactl[453]: /usr/sbin/alsactl: set_controls:1482snd_ctl_open error: Invalid argument May 08 23:09:42 orangepipc alsactl[453]: /usr/sbin/alsactl: set_controls:1482snd_ctl_open error: Invalid argument May 08 23:09:42 orangepipc alsactl[453]: /usr/sbin/alsactl: set_controls:1482snd_ctl_open error: Invalid argument May 08 23:09:42 orangepipc alsactl[453]: /usr/sbin/alsactl: set_controls:1482snd_ctl_open error: Invalid argument May 08 23:09:42 orangepipc alsactl[453]: /usr/sbin/alsactl: set_controls:1482snd_ctl_open error: Invalid argument May 08 23:09:42 orangepipc alsactl[453]: /usr/sbin/alsactl: set_controls:1482snd_ctl_open error: Invalid argument That why I can not list devices: arecord -l **** List of CAPTURE Hardware Devices **** arecord: device_list:277: control open (0): Invalid argument arecord: device_list:277: control open (1): Invalid argument arecord: device_list:277: control open (2): Invalid argument How can I fix this? Thank

I use mpv in Armbian 5.10 on a OPiPC, HDMI attach to my audio and TV . I checked the audio devices at first: mpv --audio-device=help List of detected audio devices: 'auto' (Autoselect device) 'pulse/alsa_output.platform-audiocodec.analog-stereo' (audiocodec Analog Stereo) 'pulse/alsa_output.platform-sndhdmi.analog-stereo' (sndhdmi Analog Stereo) 'alsa/default' (Playback/recording through the PulseAudio sound server) 'alsa/plughw:CARD=audiocodec,DEV=0' (audiocodec, /Hardware device with all software conversions) 'alsa/plughw:CARD=sndhdmiraw,DEV=0' (sndhdmi, /Hardware device with all software conversions) 'oss' (Default (oss)) 'jack' (Default (jack)) 'openal/audiocodec Analog Stereo' (audiocodec Analog Stereo) 'openal/sndhdmi Analog Stereo' (sndhdmi Analog Stereo) and then play some movie with a AC3 soundtrack and another movie with dts-hd soundtrack by this: mpv --fs --audio-device='alsa/plughw:CARD=sndhdmi,DEV=0' IMAX\ -\ Bears.2001.1080p.BluRay.x264-HDmonSK.mkv Playing: IMAX - Bears.2001.1080p.BluRay.x264-HDmonSK.mkv (+) Video --vid=1 (*) 'x264' (h264) (+) Audio --aid=1 --alang=eng (*) 'AC3 5.1' (ac3) Audio --aid=2 --alang=cze 'AC3 2.0' (ac3) [VDPAU SUNXI] VE version 0x1680 opened [VDPAU SUNXI] OSD disabled! ALSA lib pcm_hw.c:1667:(_snd_pcm_hw_open) Invalid value for card [ao/alsa] Playback open error: No such device [ao] Failed to initialize audio driver 'alsa' [ao] This audio driver/device was forced with the --audio-device option. [ao] Try unsetting it. Could not open/initialize audio device -> no sound. Audio: no audio Using hardware decoding (vdpau). VO: [vdpau] 1920x1080 vdpau [VDPAU SUNXI] Presentation time not supported V: 00:00:05 / 00:39:14 (0%) Cache: 10s+73MB or this: mpv --fs IMAX\ -\ Bears.2001.1080p.BluRay.x264-HDmonSK.mkv ao 'alsa/plughw:CARD=sndhdmiraw,DEV=0' --audio-spdif=ac3 Playing: IMAX - Bears.2001.1080p.BluRay.x264-HDmonSK.mkv (+) Video --vid=1 (*) 'x264' (h264) (+) Audio --aid=1 --alang=eng (*) 'AC3 5.1' (ac3) Audio --aid=2 --alang=cze 'AC3 2.0' (ac3) [VDPAU SUNXI] VE version 0x1680 opened [VDPAU SUNXI] OSD disabled! ALSA lib conf.c:4705:(snd_config_expand) Unknown parameters AES0=6,AES1=130,AES2=0,AES3=2 ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default:AES0=6,AES1=130,AES2=0,AES3=2 ALSA lib conf.c:4705:(snd_config_expand) Unknown parameters AES0=6,AES1=130,AES2=0,AES3=2 ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM iec958:AES0=6,AES1=130,AES2=0,AES3=2 [ao/alsa] Playback open error: Invalid argument [ao/oss] Can't open audio device /dev/dsp: No such file or directory Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started [ao/jack] cannot open server [ao/openal] Can't find appropriate sample format. AL lib: (WW) FreeContext: (0xb8308ab8) Deleting 2 Source(s) AL lib: (WW) FreeDevice: (0xb82ef1e0) Deleting 256 Buffer(s) [ao] Failed to initialize audio driver 'openal' AO: [pulse] 48000Hz stereo 2ch float Using hardware decoding (vdpau). VO: [vdpau] 1920x1080 vdpau [VDPAU SUNXI] Presentation time not supported Failed audio resync. AV: 00:00:04 / 00:39:14 (0%) A-V: 0.000 Cache: 10s+73MB no any sounds.