research How to enable I2s on orange pi one on new armbian kernel or build my own that include i2s

[barry2212 0]

Hi,after search around the internet i found out that is nearly impossible to enable I2s interface with new armbian kernel so searching a little bit more i found another solution that i have to rebuilt another armbian kernel by my own to enable but i don't know how.

 

So I'm writing this to ask every pro member in this forum to show me the way or guide me to make the i2s interface success.

 

Thanks all for reading this.

P/s sorry for my bad English

[Hijax 45]

As no details are provided I will suggest to:

 

1) verify i2c-tools package is installed

dpkg -l i2c-tools

2) After successful installation (if needed) check if i2c bus is detectable

i2cdetect -l

3) If working, play around with other i2c commands, like i2cset or i2cget

[guidol 271]

12 minutes ago, Hijax said:

As no details are provided I will suggest to:

1) verify i2c-tools package is installed

2) After successful installation (if needed) check if i2c bus is detectable

3) If working, play around with other i2c commands, like i2cset or i2cget

 

 he is searching how to enable I2S for Sound

like at 

 

and not I2C for devices like temperature-sensor

[Hijax 45]

20 hours ago, guidol said:

he is searching how to enable I2S for Sound

My fault