Jump to content

Switching sunxi current to 5.4.y


Igor

Recommended Posts

Kernel 5.3.y has just been labelled as EOL which was anyway expected to happen soon and most of our "current" kernels are already at 5.4.y ... Is sunxi/sunx64 ready for this upgrade? 

Don't care about 5.5.y at this moment which means DEV branch can remain as is or if someone out of the regulars take it further.

Link to comment
Share on other sites

  • Igor changed the title to Switching sunxi current to 5.4.y

Few findings - also with other 5.4.y kernels:

- Orangepi3 = broken network
- Opi Lite crashing wifi

- Teres A64 = doesn't boot / no hdmi ?
- Tinkerboard 5.4.y = no HDMI

Link to comment
Share on other sites

1 hour ago, Igor said:

Few findings - also with other 5.4.y kernels:

- Orangepi3 = broken network
- Opi Lite crashing wifi

- Teres A64 = doesn't boot / no hdmi ?
- Tinkerboard 5.4.y = no HDMI

Thanks Igor for the info. i thought i broke my board when the Ethernet stop working after flashing a new image.

Link to comment
Share on other sites

3 hours ago, Igor said:

- Orangepi3 = broken network
- Opi Lite crashing wifi

Isn't those problems related to NetworkManager ?

On my board, since I'm using almost every time "old school" /etc/network/interface, I've disabled NetworkManager and I don't have any network issues and boards are up since more than 3 weeks ...

Link to comment
Share on other sites

2 minutes ago, martinayotte said:

Isn't those problems related to NetworkManager ?


At least for Opi3 I don't think so:

[   17.213687] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.222692] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.386257] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.395289] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.428555] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.437574] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.466272] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.475285] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   17.504444] dwmac-sun8i 5020000.ethernet eth0: no phy at addr -1
[   17.513515] dwmac-sun8i 5020000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines