TonyMac32 Posted September 23, 2020 Share Posted September 23, 2020 I've been (trying) to move the Tinker and MiQi u-boots to 2020.07, however if I use any of the following: A MiQi, A Tinker S an image for a Tinker S an image for a Tinker on a Tinker S I get stuck in the initramfs busybox with it telling me the filesystem is toast. The only 2020.07 combo I've gotten to boot is the Tinker with the non-eMMC supporting u-boot. As for clues, I haven't found any, the u-boot source code is of course very well organized for debugging purposes :lol:. If anyone has an idea about what could be going on with this let me know, I'm shelving the effort to think about other stuff. 0 Quote Link to comment Share on other sites More sharing options...
balbes150 Posted September 23, 2020 Share Posted September 23, 2020 Hmm, strange, I'm currently using u-boot-2020.10-rc4 (similar to 2020.07) on rk3288 and don't see any problems starting u-boot and the system. Can you try running my image and show the UART log ? I have observed a similar problem with starting the system on rk3399 (rocky 4b) from the SD card due to the kernel configuration features. 0 Quote Link to comment Share on other sites More sharing options...
ning Posted June 17, 2022 Share Posted June 17, 2022 I got a sencond hand tinker board. and plan to falsh mainline u-boot. find Quote Flashing -------- 1. Package the image with U-Boot TPL/SPL ----------------------------------------- SD Card ^^^^^^^ All Rockchip platforms (except rk3128 which doesn't use SPL) are now supporting a single boot image using binman and pad_cat. To write an image that boots from a SD card (assumed to be /dev/sda): .. code-block:: bash sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 sync eMMC ^^^^ due to tinker board don't have emmc, thus SDcard boot. so can I use this instruction directly. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.