tdwhelios Posted December 5, 2020 Share Posted December 5, 2020 (edited) Hello, I received my Helios NAS last week, I installed armbian on eMMC with no issues. But I have a issue with my ssd and hdd. When I plug in my 5 HDD + my SSD, I only see 4 HDD ... But when I remove my SSD I can see the 5 HDDs ... So my question is stupid but it's "normal" ? I have a doubt, there is not a limitation with the GPT? Edited December 5, 2020 by tdwhelios Link to comment Share on other sites More sharing options...
Werner Posted December 5, 2020 Share Posted December 5, 2020 I think one port is shared which is mentioned somewhere at their wiki. 1 Link to comment Share on other sites More sharing options...
barnumbirr Posted December 5, 2020 Share Posted December 5, 2020 From the wiki: Quote The M.2 SATA bus is shared with SATA Port 1, therefore if you install an M.2 SATA SSD card, SATA Port 1 (J3) will automatically get disabled. Source: https://wiki.kobol.io/helios64/sata/#sata-controller-diagram 5 Link to comment Share on other sites More sharing options...
tdwhelios Posted December 6, 2020 Author Share Posted December 6, 2020 arf, thank you, this will teach me to read wikis too quickly ..., or not ... 1 Link to comment Share on other sites More sharing options...
Recommended Posts