X11 does not start (debian 11)

[tipine9824]

Hello.

Can't run x11 on Debian 11.
I am using Nano Pi AIR (Allwiner h3). Since the board is not officially supported, I built the image on debian 11 myself.

root@nanopiair:/# uname -a
Linux nanopiair 5.15.44-sunxi #trunk SMP Wed Jun 8 08:41:04 UTC 2022 armv7l GNU/Linux

The LCD is connected via SPI, chip is ili9486. Device tree file has been created, I can see the loading process and the console on the screen.

 

I'm trying to start the X-server by "startx" from ssh session, but for some reason it ends immediately after the start.
I tried using fbdev or fbturbo as driver. I also tried to remove the config with the driver in general (section "Device").
Here is the X server log when starting without explicitly specifying a driver:

https://pastebin.com/zMXaQngf

The only error is: [403138.174] (EE) modeset(0): glamor initialization failed

 

I try to use fbturbo driver. 

root@nanopiair:# cat /etc/X11/xorg.conf.d/50-fbturbo.conf 
Section "Device"
        Identifier      "Allwinner A10/A13 FBDEV"
        Driver          "fbturbo"
        Option          "fbdev" "/dev/fb0"
        Option          "SwapbuffersWait" "true"
EndSection

 

I get Xorg.log with errors "FBTURBO(0): FBIOPUTCMAP: Invalid argument". Full log - https://pastebin.com/UfgT1K8U

 

I try to use fbdev driver:

root@nanopiair:/etc/X11/xorg.conf.d# cat /etc/X11/xorg.conf.d/50-fbdev.conf 
Section "Device"
        Identifier      "Allwinner A10/A13 FBDEV"
        Driver          "fbdev"
        Option          "fbdev" "/dev/fb0"
#        Option          "SwapbuffersWait" "true"
EndSection

 

I get Xorg.log with errors "FBDEV(0): FBIOPUTCMAP: Invalid argument". Full log - https://pastebin.com/EqDCEGLf

 

Why X server terminating after start? 

 

I have a second such board, it also has armbian, but on debian 10 and everything works fine without Xorg config.

[Werner]

Moved to proper section

[tipine9824]

I'm assuming the issue is not platform specific but configuration specific.

6 минут назад, Werner сказал:

Moved to proper section

 

[Werner]

We will know once it is solved

 

[jal_frezie]

I have the same problem with a rock64 running the latest Ubuntu XFCE

[Igor]

On 10/31/2022 at 2:01 PM, jal_frezie said:

I have the same problem with a rock64 running the latest Ubuntu XFCE

Which image exactly did you try from here https://www.armbian.com/rock64/ ?