Richard_Balogh Posted October 5, 2022 Posted October 5, 2022 Hi! ill try install homeassistant on orange pi zero 512MB, but i have a problem. i have download Armbian_22.08_Jammy_rolling_Sid server_Kernel_5.19.y_359M_Sep.24,2022 https://redirect.armbian.com/region/EU/orangepizero/Sid_edge and installed armbian like https://www.albertogonzalez.net/how-to-install-armbian-debian-on-an-orange-pi-zero i dont know is it correct or not, i think Kernel_5.19 is better than 5.15? / _ \| _ \(_) |__ /___ _ __ ___ | | | | |_) | | / // _ \ '__/ _ \ | |_| | __/| | / /| __/ | | (_) | \___/|_| |_| /____\___|_| \___/ Welcome to Armbian 22.08.2 Sid with Linux 5.19.10-sunxi No end-user support: unsupported (sid) userspace! System load: 2% Up time: 9 min Memory usage: 15% of 490M IP: 192.168.3.30 CPU temp: 58°C Usage of /: 10% of 15G i used PUTTY, my Orange pi zero has an ip address 192.16..3.30 and i try to install Home assistant like https://www.albertogonzalez.net/how-to-install-home-assistant-on-an-orange-pi-zero/ python3 installed OK Python 3.10.7 I can not add "hass" user because after install i have it automatic added as a first user hass. (I dont know maybe i need someting like this? -G dialout) I get error: hass@orangepizero:~$ sudo mkdir /srv/homeassistant ... Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Collecting h11<0.13,>=0.11 Using cached h11-0.12.0-py3-none-any.whl (54 kB) Collecting anyio==3.* Using cached anyio-3.6.1-py3-none-any.whl (80 kB) Building wheels for collected packages: cryptography Building wheel for cryptography (pyproject.toml) ... error error: subprocess-exited-with-error × Building wheel for cryptography (pyproject.toml) did not run successfully. │ exit code: 1 ╰─> [192 lines of output] =============================DEBUG ASSISTANCE============================= error: can't find Rust compiler If you are using an outdated pip version, it is possible a prebuilt wheel is available for this package but pip is not able to install from it. Installing from the wheel would avoid the need for a Rust compiler. To update pip, run: pip install --upgrade pip and then retry package installation. If you did intend to build this package from source, try installing a Rust compiler from your system package manager and ensure it is on the PATH during installation. Alternatively, rustup (available at https://rustup.rs) is the recommended way to download and update the Rust compiler toolchain. This package requires Rust >=1.41.0. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cryptography Failed to build cryptography ERROR: Could not build wheels for cryptography, which is required to install pyproject.toml-based projects (homeassistant) hass@orangepizero:~$ python3 -m pip install ERROR: You must give at least one requirement to install (see "pip help install") i need your help. Thx! 0 Quote
Werner Posted October 5, 2022 Posted October 5, 2022 I suggest to to try with both supported kernel (current branch) and supported userspace (Bullseye) rather than experimental stuff. 3 hours ago, Richard_Balogh said: No end-user support: unsupported (sid) userspace! 0 Quote
Richard_Balogh Posted October 9, 2022 Author Posted October 9, 2022 (edited) i have changed to Armbian_22.08_Jammy_Kernel_5.15.y_296Mb_Sep.24,2022 but the problem is same. To update pip, run: pip install --upgrade pip Successfully installed pip-22.2.2 To install Rust curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh Quote (homeassistant) hass@orangepizero:/root$ curl https://sh.rustup.rs -sSf | sh -sSf | sh info: downloading installer Welcome to Rust! This will download and install the official compiler for the Rust programming language, and its package manager, Cargo. Rustup metadata and toolchains will be installed into the Rustup home directory, located at: /home/hass/.rustup This can be modified with the RUSTUP_HOME environment variable. The Cargo home directory is located at: /home/hass/.cargo This can be modified with the CARGO_HOME environment variable. The cargo, rustc, rustup and other commands will be added to Cargo's bin directory, located at: /home/hass/.cargo/bin This path will then be added to your PATH environment variable by modifying the profile files located at: /home/hass/.profile /home/hass/.bashrc /home/hass/.zshenv You can uninstall at any time with rustup self uninstall and these changes will be reverted. Current installation options: default host triple: armv7-unknown-linux-gnueabihf default toolchain: stable (default) profile: default modify PATH variable: yes 1) Proceed with installation (default) 2) Customize installation 3) Cancel installation >1 info: profile set to 'default' info: setting default host triple to armv7-unknown-linux-gnueabihf warning: Updating existing toolchain, profile choice will be ignored info: syncing channel updates for 'stable-armv7-unknown-linux-gnueabihf' info: default toolchain set to 'stable-armv7-unknown-linux-gnueabihf' stable-armv7-unknown-linux-gnueabihf unchanged - rustc 1.64.0 (a55dd71d5 2022-09-19) Rust is installed now. Great! To get started you need Cargo's bin directory ($HOME/.cargo/bin) in your PATH environment variable. This has not been done automatically. To configure your current shell, run: source "$HOME/.cargo/env" (homeassistant) hass@orangepizero:/root$ rustc –version bash: rustc: command not found (homeassistant) hass@orangepizero:/root$ cargo –version bash: cargo: command not found ... Python: 3.10.6 platform: Linux-5.15.69-sunxi-armv7l-with-glibc2.35 pip: n/a setuptools: 65.4.1 setuptools_rust: 1.5.2 rustc: n/a =============================DEBUG ASSISTANCE============================= error: can't find Rust compiler If you are using an outdated pip version, it is possible a prebuilt wheel is available for this package but pip is not able to install from it. Installing from the wheel would avoid the need for a Rust compiler. To update pip, run: pip install --upgrade pip and then retry package installation. If you did intend to build this package from source, try installing a Rust compiler from your system package manager and ensure it is on the PATH during installation. Alternatively, rustup (available at https://rustup.rs) is the recommended way to download and update the Rust compiler toolchain. This package requires Rust >=1.48.0. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cryptography Failed to build cryptography ERROR: Could not build wheels for cryptography, which is required to install pyproject.toml-based projects Edited October 10, 2022 by Richard_Balogh 0 Quote
Richard_Balogh Posted October 10, 2022 Author Posted October 10, 2022 i have changed to Armbian_22.08_Jammy_Kernel_5.15.y_296Mb_Sep.24,2022 but the problem is same. To update pip, run: pip install --upgrade pip Successfully installed pip-22.2.2 To install Rust curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh (homeassistant) hass@orangepizero:/root$ curl https://sh.rustup.rs -sSf | sh -sSf | sh info: downloading installer Welcome to Rust! This will download and install the official compiler for the Rust programming language, and its package manager, Cargo. Rustup metadata and toolchains will be installed into the Rustup home directory, located at: /home/hass/.rustup This can be modified with the RUSTUP_HOME environment variable. The Cargo home directory is located at: /home/hass/.cargo This can be modified with the CARGO_HOME environment variable. The cargo, rustc, rustup and other commands will be added to Cargo's bin directory, located at: /home/hass/.cargo/bin This path will then be added to your PATH environment variable by modifying the profile files located at: /home/hass/.profile /home/hass/.bashrc /home/hass/.zshenv You can uninstall at any time with rustup self uninstall and these changes will be reverted. Current installation options: default host triple: armv7-unknown-linux-gnueabihf default toolchain: stable (default) profile: default modify PATH variable: yes 1) Proceed with installation (default) 2) Customize installation 3) Cancel installation >1 info: profile set to 'default' info: setting default host triple to armv7-unknown-linux-gnueabihf warning: Updating existing toolchain, profile choice will be ignored info: syncing channel updates for 'stable-armv7-unknown-linux-gnueabihf' info: default toolchain set to 'stable-armv7-unknown-linux-gnueabihf' stable-armv7-unknown-linux-gnueabihf unchanged - rustc 1.64.0 (a55dd71d5 2022-09-19) Rust is installed now. Great! To get started you need Cargo's bin directory ($HOME/.cargo/bin) in your PATH environment variable. This has not been done automatically. To configure your current shell, run: source "$HOME/.cargo/env" (homeassistant) hass@orangepizero:/root$ rustc –version bash: rustc: command not found (homeassistant) hass@orangepizero:/root$ cargo –version bash: cargo: command not found ... Python: 3.10.6 platform: Linux-5.15.69-sunxi-armv7l-with-glibc2.35 pip: n/a setuptools: 65.4.1 setuptools_rust: 1.5.2 rustc: n/a =============================DEBUG ASSISTANCE============================= error: can't find Rust compiler If you are using an outdated pip version, it is possible a prebuilt wheel is available for this package but pip is not able to install from it. Installing from the wheel would avoid the need for a Rust compiler. To update pip, run: pip install --upgrade pip and then retry package installation. If you did intend to build this package from source, try installing a Rust compiler from your system package manager and ensure it is on the PATH during installation. Alternatively, rustup (available at https://rustup.rs) is the recommended way to download and update the Rust compiler toolchain. This package requires Rust >=1.48.0. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cryptography Failed to build cryptography ERROR: Could not build wheels for cryptography, which is required to install pyproject.toml-based projects 0 Quote
h4ckr4 Posted June 30, 2023 Posted June 30, 2023 I have exactly the same problem... No way to install cryptography package... Any help ? Thank you. 0 Quote
王 維 Posted January 20 Posted January 20 (edited) On 6/30/2023 at 9:04 AM, h4ckr4 said: No way to install cryptography package... Upon meditating over broken builds for quite some time, here is how to build HA on an SBC with a very limited amount of RAM: Force Python build system to utilise unlimited user-supplied $TEMPDIR, rather than system-managed which is too small and zram-based It's unfair, but the builder is expected to RTFM installation notes for all the dependencies. That's right, OS-packaged rustc cannot be used, and it has to be a rustup I am stuck with `NumPy` installation. Whatever I do, the build OOMs by exhausting small swap file with 4x instances of cc1 compiler, running in parallel. My take is even if I manage to build HA, the deployment wouldn't be sustainable because of inability to upgrade it frequently TODO: explore containerised deployment EDIT: NumPy wanted a long list of dependencies. The install script has updated. Interestingly enough, with exception for `cryptography`, none of the failing dependencies are declared if I query `python -m pip show homeassistant`. Nested dependencies have to be learned the hard way. Opinionated Install Spoiler sudo useradd -rm homeassistant -G dialout,i2c -d /srv/homeassistant sudo usermod -aG homeassistant pi sudo ln -sr /usr/bin/python3 /usr/bin/python sudo apt remove rustc sudo apt update; sudo apt install -y libssl-dev libffi-dev python3-venv python3-dev pkg-config cmake ninja-build build-essential # Pillow==10.1.0 dependencies sudo apt install -y python3-setuptools libtiff5-dev libjpeg62-turbo-dev libopenjp2-7-dev zlib1g-dev libfreetype6-dev liblcms2-dev libwebp-dev tcl8.6-dev tk8.6-dev python3-tk libharfbuzz-dev libfribidi-dev libxcb1-dev # PyTurboJPEG==1.7.1 dependencies sudo apt install -y libturbojpeg0 libopenblas0 libopenblas-dev # numpy==1.26.0 dependencies sudo apt install -y ffmpeg libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libswresample-dev libavfilter-dev sudo su - homeassistant python -m venv .; source bin/activate; python3 -m pip install --upgrade pip wheel setuptools curl https://sh.rustup.rs -sSf | sh source ~/.cargo/env cargo --version rustc --version cmake --version ninja --version python --version pip --version python -m pip show cryptography which {pip,pip3,pip3.11} export TMPDIR=$HOME/tmp_dir mkdir -p $TMPDIR cat << 'EOF' >> ~/.bashrc # Essential: it has to be an absolute path . "$HOME/bin/activate" export TMPDIR=$HOME/tmp_dir mkdir -p $TMPDIR #rm -rf $TMPDIR/* EOF pip install cryptography pip install Pillow==10.1.0 pip install numpy==1.26.0 pip install PyTurboJPEG==1.7.1 pip install homeassistant Edited January 21 by wang.wei 王維 successful installation 0 Quote
Igor Posted January 21 Posted January 21 10 hours ago, wang.wei 王維 said: TODO: explore containerised deployment 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.