Ngo Thang Posted January 1, 2023 Posted January 1, 2023 I have an X96 Air (version with chip wifi RTL8822CS). I installed Amrbian (via flash to SD Card) and run some months, next I install Armbian from SD Card to eMMC and run next some months. But in a day, it bricked, nothing in screen. And I have to flash stock rom (X96AIR_Q100_20210126-1140.img) via USB Burning Tool. Then my X96 is survive again, I can use it as a TVBox. But I try to plug SD Card with many images/versions of Armbian and with/without press reset, it can not boot from SD Card, it still boots to Android TVBox GUI. I try to flash Amrbian to USB stick, try each of three usb ports, it's still impossible boot to Armbian. So how I have to do now ?
SteeMan Posted January 15, 2023 Posted January 15, 2023 You say you have tried many versions, can you be more specific? There are only the versions linked in the FAQ post instructions: https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus If you are trying other builds then you may need to reinstall the original android firmware before trying the armbian community builds as mentioned in the instructions.
Recommended Posts