CSC Armbian for RK322x TV box boards

faxe2110 · August 22, 2022

Hallo,

today i was getting my Mxqpro 4K 5G with RK3229 from Aliexpress, the same like @armbianorange2hero.

I tried to boot the Multitool from the SD Card after i flashed it to the SD Card with Etcher but nothing is happen. Also tried a second SD Card but still no booting from SD.

It just go to the installed GUI.

Is it necessary that there is a img. in the image map or should the Multitool also boot without an added img??

What am i missing?

Best

jock · August 23, 2022

16 hours ago, faxe2110 said:

Is it necessary that there is a img. in the image map or should the Multitool also boot without an added img??

The multitool should boot in every case, don't know the reason why it does not boot 🤷‍♂️

fabiobassa · August 23, 2022

@faxe2110

Without a uart log very difficult debug why doesnt boot

Vittorio Mori · August 23, 2022

Just to let you know, and maybe give you some inspiration:

playing with OpenWRT on this device (see my post), I've discovered that now there's support for LXC containers.

So I installed a Debian-bullseye minimal rootfs as a LXC container in the device and now I run a pi-hole in it.

So I get the router part via OpenWRT and the adblocker + a very fast and reliable dns/dhcp w/pihole together in the same device.

Indeed very cool, with a $9 device, also quite fast.

I'm amazed.

faxe2110 · August 24, 2022

Hey,

well i found the issue.

Inside the Box is NOT a RK3229 but a AMLogic S805 on a m201C_AP Board.

After i knew that, it was more a "easy" to run Armbian on that device.

Right now i´m running Debian Buster on a 128GB SD and it seems to running well.

But is there a way to get it on the intern flash?? I think this will not be the right place for asking that in this post. So if anyone has a link inside the Forum it will be amazing.

I will also search by my own.

@Vittorio Mori nice i will take a look at it thanks for the hint.

Edited August 24, 2022 by faxe2110

RaptorSDS · August 24, 2022

Please for S805 use this thread

ninh · August 24, 2022

I got error when booting multitool from sdcard:

<\0>DDR Version 2.06 20170316<\r><\n>
In<\r><\n>
1A1A292B   0<\r><\n>
1A1A2A2B   3<\r><\n>
LPDDR2<\r><\n>
2A2B2A2B   F<\r><\n>
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB<\r><\n>
mach:14<\r><\n>
OUT<\r><\n>
Boot1 Release Time: 2017-06-12, version: 2.40<\r><\n>
ChipType = 0xa, 1377<\r><\n>
SdmmcInit=2 0<\r><\n>
BootCapSize=1000<\r><\n>
UserCapSize=3696MB<\r><\n>
FwPar??????*<\0><\0><\0>?<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?<\0><\0><\0><\0>?<\0>??<\0> <\0>0<16>)!p?>DOH<\0>xf?<18>:???'O?<\r>.D<\0><1> <18>???X ?<26>_>4n<19>?"AJ???6u<6>?<\0>z<4><\0><6> ?<\0><16> ??h?<16><1><6>?l??)R<1><16><21><\b>V`????2PC X<\0>?X(<25>@<\0> @*<18><20> K(<11>?$"b?????#?<19><15><\0><\0><\f><2>D<\0>a<24><18>LP<\b>B<\0><17><26>?<6>&?<4><\b> ?<31>;??8Ji<27>??7<11>0L?<2><1><2>??)<5>?<20>??(<\0><1>?<\0><9> M?<1>@?? ??X<25> ?<19>T<\b>F<4><\0>2<1><\0>h0<\0>E<16><\0>?d ?@?2_H<2>EWCR?<2> b<2><\0>?A???I?<16><5>(<4>?<25>?<27>Qt!p2<4><18>?<16><4>ARZ<\0><1>?.<\b>$C?P?@<\0>?2???<2><15><\0>?7?C??<\0><4><\0><\b><19>???<\b>?<\0>?=<2>?<9><\0>!S  <6><\f>D?BA@R<\0>@?H<9> <\0><\0><26><1>??<\f>?\<16><\f>G8Q5<16>?@b??<\b><2>?<3>!<1>=5R<4>3?<6><\0>$?#!?<24>0z#!B ?N<2>??@?B<\r> ?4<16>?Iw?<1>?L??<3><15>0:??<2><2>?N<\0>?5??k?<\b><2>h????<\f>j<6><\b>??????@??:<\0>?.<\0>?@PX?<\b>?|p,<2><14><6>????W????<4>?9<\0>??F????B <7>??e?<4>9<20>?<\0><16>??b<\b><20><16><4>r?<\n><1>tT)?<4>?<5><2><21>@<17>?0<1><16>?<\0><16><20>???<17><4> <\0>e3?X<1>???<2>?`??b??X??F??]<20>?<1>E?H<14><\f><3>?,sCNXK:?1???cp"??I@<1><11>??<16>?<1>??<5>?HA<19><28>i??<16>??<11>???'n<\b>??!<3>h??T$2?m?.?<18><2>F???P?K?Pp<\0><1??d(>?<25>?<9>  ?-F.<4>?<\b>??<\n>?<24>s<18> <14>@<\0>??H?<4>p?Qi??Y_<24>R?7?<\0><16>??<1><24>H???<\0><19><1>P<1><20>?M?evI5???<\r> ??t?K?<22>??<\n>?c??<\0>??<\0>???!??(??<4><6>!?<\b>%:<\0><\0>???<20>?0??lD<4><26>?B0(?M?K <\0>sb???|?<\f><26>s<22>?<17>R@?B?$?<18>l?GL1?y!<\f>?<2>(<2>??<\b>(?<\0><\n>?B b?<\f><\0><\f> <2>d??? W?UE<20><1><17><\0>??<20>Jh??<16>!? ?V<\0><\b>i<17>??<\b>??<16>9<25><22>I??X"!4#??<14>?U<\0><16>?<4>@X???K??B??<16>??<25><11>]R!<\0>??<\b><1> Th<\0>Y??B M?z?%?<4>+<\b>??I?T<4>??W?<\r>F???????K?G?\?&h?B*9?@N3C?'.<18><4><4>??<\n>9?QK<2>??<2><4>*B_?h?<21>w<14><\0>??<1>H=hXC<18>-v0Q?<7> m.?L<1>?<17>L#6H??<14>3)?W?a?HI?R<\b>BI??S?X`<\b><\b>?<27>?<9>?g<\n>?<\0>`<3><5>L<21>FL?<16>?X?<17><\b>?,<11>!?<2><\0>??<22><26><\0>Y ?@T??<24><\0>?L???6%?B??#~o?`<4>F???`"(Q?#?MSb)!?X<29>(<21><28>!)<3>?H<5>???jO?<20><3>$??10?/??U;H???A\<17>@q<\n>?<16><23>f`$<\0>?<\n><\b>T?@l<\f>?P<\f>??X<21>`???c?X<18> #@??<\b><17>f<\0>I<16>'?<19><4><19>E??<\f>@a??<\f><\0>P!'?<2> ??XHC???HD=(<\b><1>?h<2><\0>?`<\0>?H?<30><16>b?L<\b>&R?w?<3>?<16>@ <19>2]J?%IjV??<\r>?E:<9>1F??<6><19>d`<\0>0??<28>?<24>~?<31>???<2><2>k#<9>M??<9>?$?<24>@?<\0>??<\n><2>?P?!b<20>?4l<30><\0>?L<18>?<5>?z<11>GJ?I???G?B<\f>?<28>Z<\0><\0>dH<\b>2@g????<20><1><5>`?@?<1>Q<6>?<18>@"<20>?%<29>?<\0><9>`<\0><2>!<9>t<2>h<1><24>??<1>(C?<4>A<\b><\0><4>iH<1>?<15>E<4>H<3>K???<4>?`c?FD??d?<\0>?(g<\0><1>N?<\n>? ?<9><24>??<6>?<\0> ??$?<24>#?<\b>?P?`D!!?(?<5>6`?<\0>[Wd ?<\f><\0>,?B(?<]??<6>`<1><19><\b>?<26><9>?, <17><\f><\0>??<31>:?@?Q<5>?<4>E<\f>??<\n>??<4>??<4><11>M?<\0>(dP?"<24>?&B3$?D<\0><\f>?#"<\n><\b><4>?<9>0<\0><24>$<4>?<17> <\r><16>?A2?,<26>?<\0><1> P+?<\0>?????P*<9>(<17>I@<20>HM?<26>$&???B<18>??<\0>B`?b??? <\b>0r??@<4>?<18><1>?8YDH?`\?9<20>x?6<1>L<\b><1>???<4>$ <5>? <\r><2>??P<7>?<16><9>i`?A<\0>%<1>z??~R<29>???`1?|<28>??<24><4><4>?0#<6>???<1><\b><\b><\b><20>@<17>@<\0>`<17>%<18>B??P??P<\b><\0><\0>`1<2>? ?"?<18>@`<\b>*?<3>H)`<\0>H??$G<\0>T<3><\b><\0>L <16><24>Sf<\b>?<\0><4><\0>"?<\0><4><16>A<\0>b6<16><\0>?<4><\0><24><\f>?<\0><\0>!@L<6><\0><\0>@@?<2>"1<\0><19>(<4>? ?<22>#<18>?@?<6>J????<22>?? <4><15>?DP?L<18>?<28>?<3>?@?<18><18>?<19><20><\0>*.g??<24>QK? 8?<6><18>vMjy,?<\f>?@Y?B?????1?<16>a?*<24><1>I<\0><\0>?<11>B?<3><\0>?"Q?q??<2>??xH<\0><20>5Pc<\0><16><\0>W?7?&<\r>9?9I<1>?<\b><\b>1<16>?<1><30><\0><17><\b>C?<25><\r><1><2><\f>`<6>w ?<\0>?<5>:?,?6??<1><\0><20>?<24>&?<3><\r>?H??F???<\b>??q?pu?J???W??<2>??r?<\n>4?^$?Z?D?B?<\0>&O<1><9><16>?<\r><20>?f`<7><19>???<<14>??<4>07<14><\0>??<4><\0>X(<2>E????<21><16><\0>f?<30>Q,~<\0>?<\b><16>H@+?@@<2><\0><\0>*? <7><1><\0> BP<\0>@A<\0>!<4><\0><\0>??<18>@<\0><2>!?$<4><20><\0>?<\0>P/?,?<1>??V?k<1>V?P%?<6>T??%?<9>@U@<2>`+<1>><\n> <\0><\0><16><\0>`<\0><1>P?<\r><\0><17>@??@<1><\0>B<4><3>?<1>Q<4><\b><\n>?<6><2>?@c<\0><\0>0<\0>?PHH<20>-I<4>?<2>?H?<4><26><\0><\0>@P<\f>H<1>S<4>0<\b>? AB<17><14><\0>@! <\n>?`?<\0><18>?<16>?<9>?<\0><3>P <4><\0>?<\0>@<9><\0><\0><24><\0>??@<4><\0><4><1><\0><\f><4>B?<\0> <17><3><\0><\0>?<2><\0>?@<6>@<\0><16>l<2>?@<\0><\0><\0> <\0><\0><14><4><\0>? <4><\0><1>?<\0><\f><\0><\n><24>X<16>??<\0>??<\b>??<\0>!<\0>8`!<17>??<2><\0>?<\0><\n><\b><\n><\0>?&<\0><\0><\0> <2><17><\b>b? ??<2><\0><24><\0><\0><\0><\0>H ?<\0><\0><\0><\0><\0><\0><18><\0><\0><16><\0>  <\0><\0><\b><4><\0> P<\0><2>&@<\0>?<\0><\0>? <\0> <\0><2>M?<9>?<16>?(<16>?<\0>0<\0><\0>?<\0> <\0>@?<\0><\0> <4>!<1>F<\0>8<6><\0>??<\0><\0><3><\0> <\b><\0><2>?<2>`<1><\0><\0><\0><24><\0><\0><\0><\0><\0><\0><\0>@<1><\0>?<\0><\0>!<\0>H?@??<\0>@?Ax?<11>??<\0>2 ?B<\0>?<\0><6>?!<25><3><\0>?P<4>0??<4><5> <\0>3<29><1><6><\0><1>"<\0><\0><\b>?R0@<\0>?!<20> ?A<\0>(<20>P<18><2>P@?<1>?<\0><3><4>?<\0><\0>?iE<\f>`<9>-@<\0><\0><\0><\b>@b<1><\0><\b><1>@A?<16>x<\0><16><3>?<\0>?<2><20><4><\0>@<\0><5><2>?F<\0>?$x<\0><1>?<16><2>C$<2>@<4><\b><22>?j<\0><18>?P??8<4><\b>??J?<1><9>R$<2>?P<3><2><16><\n><\b><\b><\b>(<24>?<16>J?<\0>0<\0>?| <\n>PU?<\0>`???<\0><\0><\0><24>?<\0>?<2><\0> ?<2><\0>A<24><\b><4>`?<2>?Q?<16><16><\0>,?<16><16>X<\0>%<18><\0><16><\0><16><\0><\0>?<\0><\0>?<\0><\0><\0><\0>h<6><1>`<1><\0><\0><\0> ? X?<2><\0><1><\b><\0>?<\0><4><\0><\0><\0><20><\0>?@@? <4>@ <24>@J<\b><5><\0>I<\n><17>@?<\0><\0><\0><18><\0>P?@$ <\n>?(<\0>J<6><\0><2><\0><\0>?<\0><17><\0><\0><\0><\0><17>?<\0><\0>EU<19>d<4><\0><\0><1><\0><2><17>)<\0>??j? <18>?<2>H<6>T<21><6><\0> A<\0><\0>@<\0><\0><16><18><\0><4><\f><6><20><\0>?<\0><\0><16><1><\0>@<\0><\0><24><\0><\0> <\0><\0><\0> <\0><\0>?<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?<\0><\0><\0><1><\0>?????}?o??????{o??{[o??{?[k???o???o??{oo?{o??m{??{o{?{??????????????_??]????_???????}???W??]y?????????{???m?????????????m???{{???{{[??[m{{?om??????????7??????m?k???????os?{o?{{?{o?k?om??{n????_???????k?????W?????{?{o????????{?[?????[?{??{?????k???]W????^???u{??????????[?_???<\0><22><\0><1><\0><\0><6><\0><\0>@<\0><2>F<2><2>?<2><\0><4><14><4><\0>`<\0><\0> <\0><\0><\0><6><\0><\0>?<\0><\b>?<\0><\b>??<\0><\0>$<\0> <\0><\0><\0><\b><5><\0>0<\0>0<4><\n><\0><2><\0><\0> @<\0>?<\0> <\0><2><\b><\0><\0><5><2><\0><\0><\0><\0><1><\0><\0><\b><\0><\0>?<\0><\0><\0><4><\0><\0><\0><\0><\0>`<16><\0><\0> <\0><\0><4>H<\0><\b><4><\b>?<\0><\0><\0><2><4><17>M<5><\0><16>??<\0><6><5><2><\0><21>5<4><18><18>??@<1>???!?<1>H?1<27>??O<\0><\0><\0><\0>????<\b>I<\0> 4?<18>????b?3?8?,4@<\0>?<\0>????f?<\f>?b<18><16><1><26>?P!<15>?1"$<7>???P?0r1<18><22>A?O<24>?f?<20>1`?T<\b>?a<\0>Z<1>????b<\0><4><4><16><16>?<\0><4>?|`<14><6>A?&<16><\0>H?<3>H0<2>t?@<17>`?<6>0<4>*R<\0> <6>L<9>???( K?Z<4>?? <6>H@??<18>??H?"?<16><4>8?<4><\0><\b>??<\f>P?c<4>?0?<26>?<\f>," <\0>C`??<\0><16><\0>?<16><\0><6>B<2><2><\0>?/<2>?<26><25>?<9><14>p?j??<18>?<\r><18>A?<2>?B6??<16>"<\b><\b><6> <\0>A@<2> DP????<20>J%Ag@<16>"<16>5D<5>R??<\0>@<18>4<2>??<2>?" DB?<\0>% ??<\n><2>?<4>?<28><4><\0>?-<\0>P??<\0><3>?<\b><2>0??P<\0><\b>P<\0>?D? THBJ0CK<\0>?<16><5>???<24><\0>LL<\0><4>PT<\f>?<\0><16><\0><4>@?<2><\n>?d<\0>?@<\0>#D??KP@?0<\0>@<\b>PR-?!<28>(<16>0<4>?<28>?<\b><18><9> <17>?<\0>L`?<\n> %?<\0>%<2>?c<22>?b@<\b><16>??H<24>S<\b>?<21>A<\0><6>$<\0>&@<\0>???BI!?<4>?@BL<\0>@@ ?T<6>a`:<4>?D<\r>?<20>?<\0>V<\0>90p"Y<2> ?<27>?<\0>?R?<1><2>q<1><1>?? <\r>?<\0>?A<16>"? 0?<16>Q<19>?"E??<7><\0><16><1><20><\n><4>Q<4>Q!<19>?<4><4>?<\0>@??????P<16><5>?<\b><\0>?<2><\n><18>?2?<24><2>?<\0>"?B@<3>?<\0>?<\0>r)2)??<\r>l<4> <6>B:?IA$D)A<2>R@?<7>e?<5><5>?B?<4><\0>??<3>X<\0>?<\n><\0>C??h<16>?<\0><2>?8??S<16>??<\n>?<\b><4>@<14>???<5>?#<3><16>#<16><4>A? <4><\b>$b<7><28><18><16><\0>???$<\0>?<20>@?<2><\0><21>"j?E<17>?<1><16>0?@!??<18><6><2><\b>"<26><\b>?<9><\0><16>?<4>?8?A<18>(<1>#&<16>???<\b>?A?<2><4>?<9>A<2>??<1>*<16>?1V?0<7><20>,<\b><5>hQ<7><\f>n<\b>?E<\n>p<\b><28>08<\0>\??H<\0><\0><22>??H<16>?B?<26><1><2><16><\0>((<\f><4> SBF?k8<20>??0F?<\0><2> <\0><2> <16><18>0?<3>?<6><25>a<16><17>?,!h?@0?<18><4>F<26><21>?<30>?<\0>??<9>?8P<\0>$<3>????<9><\0>? ?<24>0H<25><\r><4>??<16><17>!<\0>.?<1>?'@<\b><1><24> L??<\b>C?%<9>B<16>?a <25>,?<1>1<9><16>`<24><\0>?*<\0><1><2><7><\f><\b>-???<\0><17>eP<\0>&? ?<1><\0><20><16>"?@<5>(<\0>P<16>C(<\0>?<1>@?<4>?<\0> <\0><21>0?<24><\b><11>.?&?0q2?<\0>(<\0>?<5>  <2> <\n>$<\0><\0>?<\0>H<2><1><\0><\b><\f><\f><19>(<\r> <\b><26><\0><1><2><16>`<\0>??3???<28><3>P?<3><\0><2>?<17><\b><5>!Q $?<\0>`l<16><4>?<\0>B?<\0><1>"D<2>?<\0>@<4>C<4>??<18>!? <\0>?)@<\f>TF??B?K??<\0>?@+,<\0>P<\f>?<\0><\f>A8<14>??<5>????<15>??<4>@V$?'@<4><18>@<7><16><24>l<16> ???<\0><18>!<\0><3>?dL?<2>@1<\0>??<1>??<\b><\0>`?<2><\0>A<\0><\0><\b>?@<2><1><2>?<16><15>?<\0><\f>`<2><4><\n><\0><4><27><\0><2><4> <\f><25><\0><\b><6>D ?<\0>?<24><\0>$<6>s<\0><3>A<\b>"<1><\0>&<24>0<\0>@<17><2>'??$?<2>@<16><\n>?<1>@<26>A<1><17>G"#??<5><6>F?@BTe??<24><\n>??)<4>?<5>?<20>?$<\b>?h<4> B?<3><\n>`<23><\b><\0>R<7><\b><\b>?<2>?<1>@<20>"<\0><\f><16>?<4>fF*$@!<2>?<2>1{<\b>????`???%"PdD<6>?<\b><\0><16><\0>?<4>X  $ +)?<5>?<\f>?<17>P??`4? ?<4>2<1>D"<2>?@??B<22>??Gf?D?<9>?<3>??(<18>f%?k???<\b>????<1>aP:?<19>?<\0>????`?x#?<15>;jN,<\0><\0><4>?<\0><17><\f>?<\0><4><\0>?<\0>`?<\0>0<7>9?f?g?^"?O<5>?<14>??????<17>X<\0><\0><4><\0><\0><\0><\0><\0>@<20>?<\0>?<30><\0><\n>?<5><7><\r>??GG<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>@<\0><24>?<\0><\b><1>?<\0><\0><16><4><\0><\0>F<\0><\0><\0><3><\0><\0><16><\0><\0><\0>p?x?I$???#?<16>?P??<24>?5<??<\0><\0>9?b<4>?^?<\0><\0>??r<1>??LJF?<4>6=<\0>????.?<1>0<\0><\0><\b>?#2?#<22>??h?(?I*??ju?2N<5>MT?(<20><6><26>A??<7>??<28><21><\b><6><\0><2> <\0><\b>?D??<\0><\0><\0><\0><\0><\0><\0>?<\0><\0><\0><4><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?<\0>C??2???<23>??2??d<11>?<\0>?<?<\0>H&pR<1><\0>E<6><\n>?<\b>&<16>#??<9><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><16><\0><\0>P?<\0>?<6><\0>(z?<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?h<4>??,??8?<\0>0??4<\0><6>w?<\0>?XA?<\b>^?@M?<\b>?!? 4<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?

Seth · August 25, 2022

hello again.

i downloaded the current 5.15.61 sid build on github for rk322x and tried it on my box which has rtl8723cs chip. the chip is detected by rk322x-config but no wireless interface is shown when i do ip link. looking at dmesg i get

dmesg grep rtl8723cs output

[    9.848405] RTL871X: rtl8723cs v4.3.22.9_16440.20151221_BTCOEX20151214-0700
[    9.848426] RTL871X: rtl8723cs BT-Coex version = BTCOEX20151214-0700
[    9.848950] rtl8723cs: probe of mmc1:0001:1 failed with error -110

dmesg cfg80211

[    2.404787] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.451272] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.462651] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid

i have scishion v88 mini which has NAND so i used multitool to install jumpstart nand and it booted to the sd card. went through all the config just fine except for the wireless. i also attached the complete dmesg log. anyways, i am going to try out 5.15.25 bullseye build from this thread to see if it is going to work. it did work fine with the legacy build though.

edit

same error with 5.15.25 build.

dmesg.log

Edited August 25, 2022 by Seth

ninh · August 27, 2022

I'm having a weird board.

Chip label is RK3228A, with 8GB eMMC from SKhynix. Multitool doesn't booting up.

In maskrom mode, chip shows as RK3128 and flash 4gb from samsung.

Bus 003 Device 052: ID 2207:310c Fuzhou Rockchip Electronics Company RK3126/RK3128 in Mask ROM mode

Flash Info:
        Manufacturer: SAMSUNG, value=00
        Flash Size: 3696 MB
        Block Size: 512 KB
        Page Size: 2 KB
        ECC Bits: 0
        Access Time: 40
        Flash CS: Flash<0>

After erase eMMC using rkdeveloptool, I can still enter maskrom mode but I can't do anything else.

sudo ./rkdeveloptool rci
Read Chip Info failed!

jock · August 28, 2022

On 8/27/2022 at 4:43 AM, ninh said:

Chip label is RK3228A, with 8GB eMMC from SKhynix. Multitool doesn't booting up.

Looking at the USB vendor and device IDs, your chip is not a rk3228a but an rk3128.

You may say "But the chip is labelled rk3228a!": there have been past evidences that labels on the chip have been manipulated; I remember a case of a user were the chip was an rk3228a but the label was "Amlogic S905W".

rk3128 in different unsupported chip.

Basement · August 28, 2022

I have been reading this forum, googling, and tinkering for a week or so and I am still having trouble with RAM. Android shows 2GB but in armbian I can only see 1GB. I have used the compiler found here, made sure HIGHMEM was enabled in kernel options, but I still only have 1GB. I feel like it is something obvious that I am overlooking, but can someone help me out?

RaptorSDS · August 28, 2022

vor 1 Stunde schrieb Basement:

Android shows 2GB

where did android shows this ? , the normal view under settings is easy to manipulate , also some tools like cpu-z sometimes show wrong numbers .

Basement · August 30, 2022

Hi RaptorSDS. Thanks for the quick reply. I had used several apps, ran "free" in a terminal, and all showed 2GB. In all of those cases it was shown that a little over 1GB was in use, maybe 1200 or so. I think what you are suggesting is that what is being shown in android is a lie, and I expect you are correct. Can you suggest a more reliable way to check this in linux and/or android?

Edited August 30, 2022 by Basement
removed a sentence where I realized I was wrong

jock · August 30, 2022

@Seth Your issue is due to the low pin strength used for GPIO, in some earlier tests I found that lower pin strength for wifi increased overall stability so it is set that way by default, but probably the stability issues were caused by something else.

I should set them back to default values. Anyway you should tell what is the real board in your scishion v88 box, as far as I remember, there were some chiptrip mx4vr or something like that into...

fukowaka · August 30, 2022

Hello there! I succesfully burn @jock Armbian_22.02.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal on emmc chip. Boots OK but im stuck on emmc optimization options after running rk322x-config command.

The memory chip is a samsung KMVUS000LA-B304 8gb. The processor is rk3229 (I think... its under a heatsink...)

This tv box is selled here in Argentina as Noga tv box.

Im really excited with this project. Thanks to all people involved!

Im posting some pictures, maybe can help someone else.

pd: how important are emmc optimization options? can i go on without configuring this? thk again

Seth · August 31, 2022

9 hours ago, jock said:

@Seth Your issue is due to the low pin strength used for GPIO, in some earlier tests I found that lower pin strength for wifi increased overall stability so it is set that way by default, but probably the stability issues were caused by something else.

I should set them back to default values. Anyway you should tell what is the real board in your scishion v88 box, as far as I remember, there were some chiptrip mx4vr or something like that into...

hi @jock thanks again, i can finally do some tests on my scishion since my h96-max box is doing all the heavy lifting on my network and printer now and it's running smoothly. my board has an id MX4M-V11. i tried the led-conf1(mx4vm) and it did not detect wifi either, it works fine with the legacy build i tested about 2 hours ago. i will eventually go full on hardware mod on this and probably transplant an EMMC chip on this board if there is an unpopulated place for it underneath the NAND.

Edited August 31, 2022 by Seth
add pic.

Seth · August 31, 2022

@fukowaka

hello, congrats for successful install. emmc optimization is only really to squeeze more performance out of the hardware if it supports it. since our tv boxes are literally frankenstein's monters and are put together from probably used parts or even re-labeled chips, i tend to stick with the the defaults and get it working first to see if it would fit my use case. the default speed of the emmc is already way faster than an sd card i wouldn't worry about it and go with the defaults.

Seth · August 31, 2022

this arrived about 5 minutes ago, "out of the box and into the fire pit". board id is MXQ_8058201_v1.3. seems i got an emcp. it came in with the wifi sdio shield removed, i'm guessing they changed the inductor on the lower left of the pic and didn't bother putting the emi shield back on. it's a broadcom 4336 chip

the uart is very accessible. will edit later for further findings.

https://photos.app.goo.gl/48jMUW5LP239yZdbA

Edited August 31, 2022 by Seth
added photos.

jock · August 31, 2022

@fukowaka glad to hear your board works fine. I suggest you to use a mainline kernel if you don't have a NAND, the kernel is way more up to date.

Legacy kernel builds are very old and I just keep them for people with NAND boards.

The eMMC tuning options (which obviously applies only to boards with eMMC/eMCP and not NAND) can give a consistent boost to eMMC throughput, but your mileage may vary.

orojasp · August 31, 2022

Hi Pals,

This is my first post here. My approach on armbian has been a little bit complicated but always read this thread.

I have a tv box with an r3228a on it. I'm not totally sure because I didn't perform an test using hexdump as described before, but is one of things I have to do.

In the next posts I'm going to tell you what test I've done and which others I'm failing, but this first one is mainly to thanks you for all this information and hard work you put freely to public use.

Just trying to run armbian on this box I've learnt a lot! There are many hours of fun and mainly learning (I'm a terrible linux user) to try to give a new use to this little box.

see you! Thanks again!!

Eliel Prado · August 31, 2022

Hi @jock,

I'm having some issues with my Rockchip 3229 TV box. It has 3GB of DDR3 ram, 4GB of NAND memory.

All images I tested including Multitool, LibreElec, Armbian crash after a few seconds. It freezes between 30 and 60 seconds. Sometimes after the system finishes booting, sometimes at boot (if the boot process takes longer, like on first boot).
It doesn't matter if I'm using an image that uses a minimal interface or with a graphical environment, it turns on the led flashes and after locking the led it stops and remains on, and usually generates some noise in the debug port.
I'll leave the boot debug logs, it's not a power source problem because I tested it with 3 others, and I also tested it on another tv box of the same model, and it had the same behavior.

Link to board photos: Google Photos

Link to the vídeo: Youtube

Spoiler

DDR Version V1.10 20190926
15:54:12.210 -> In
15:54:12.210 -> ID:0xFFF
15:54:12.210 -> 660MHz
15:54:12.210 -> DDR3
15:54:12.210 -> Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
15:54:12.257 -> mach:2
15:54:12.257 -> OUT
15:54:12.304 -> Boot1 Release Time: May 13 2019 17:02:59, version: 2.56
15:54:12.304 -> ChipType = 0xc, 268
15:54:12.304 -> No.1 FLASH ID:2c 88 4 4b a9 0
15:54:12.304 -> ECC:60
15:54:12.304 -> FTL version: 5.0.56 20190508
15:54:12.677 -> mmc0:cmd5,20
15:54:12.819 -> SdmmcInit=0 0
15:54:12.819 -> BootCapSize=0
15:54:12.819 -> UserCapSize=60906MB
15:54:12.819 -> FwPartOffset=2000 , 0
15:54:12.819 -> StorageInit ok = 542562
15:54:12.863 -> SecureMode = 0
15:54:12.863 -> SecureInit ret = 0, SecureMode = 0
15:54:12.863 -> atags_set_bootdev: ret:(0)
15:54:12.911 -> GPT 0x63337df8 signature is wrong
15:54:12.911 -> recovery gpt...
15:54:12.911 -> GPT 0x63337df8 signature is wrong
15:54:12.911 -> recovery gpt fail!
15:54:12.911 -> tag:LOADER error,addr:0x2000
15:54:12.911 -> hdr 633377e0 + 0x0:0x00000000,0x00000000,0x00000000,0x00000000,
15:54:12.958 -> LOADER Check OK! 0x61000000, 670116
15:54:12.958 -> tag:TOS error,addr:0x4000
15:54:12.958 -> hdr 633377e0 + 0x0:0x44414f4c,0x20205245,0x00000000,0x00000000,
15:54:13.052 -> TOS Check OK! 0x68400000, 743047
15:54:13.052 -> Enter Trust OS
15:54:13.052 -> INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日星期五 03:32:22 UTC arm)
15:54:13.052 ->
15:54:13.052 ->
INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0
15:54:13.052 ->
15:54:13.052 ->
INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000
15:54:13.052 ->
15:54:13.052 ->
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
15:54:13.099 ->

15:54:13.240 ->
15:54:13.240 -> U-Boot 2020.10-armbian+ (Mar 12 2021 - 13:38:05 +0000)
15:54:13.240 ->
15:54:13.240 -> Model: Generic Rockchip rk322x TV Box board
15:54:13.240 -> DRAM: 1010 MiB
15:54:13.381 -> MMC:   dwmmc@30000000: 1, dwmmc@30020000: 0
15:54:13.428 -> Loading Environment from EXT4... Card did not respond to voltage select!
15:54:13.474 -> In:    serial@11030000
15:54:13.474 -> Out:   serial@11030000
15:54:13.474 -> Err:   serial@11030000
15:54:13.474 -> Model: Generic Rockchip rk322x TV Box board
15:54:13.474 -> Net:   eth0: ethernet@30200000
15:54:13.615 -> starting USB...
15:54:13.615 -> Bus usb@30040000: USB DWC2
15:54:14.889 -> Bus usb@30080000: USB EHCI 1.00
15:54:14.936 -> Bus usb@300c0000: USB EHCI 1.00
15:54:14.936 -> Bus usb@30100000: USB EHCI 1.00
15:54:14.983 -> scanning bus usb@30040000 for devices... 1 USB Device(s) found
15:54:16.106 -> scanning bus usb@30080000 for devices... 1 USB Device(s) found
15:54:17.231 -> scanning bus usb@300c0000 for devices... 1 USB Device(s) found
15:54:18.369 -> scanning bus usb@30100000 for devices... 1 USB Device(s) found
15:54:18.511 ->        scanning usb for storage devices... 0 Storage Device(s) found
15:54:18.558 -> Hit any key to stop autoboot: 0
15:54:18.558 -> switch to partitions #0, OK
15:54:18.558 -> mmc1 is current device
15:54:18.605 -> Scanning mmc 1:1...
15:54:18.605 -> Found /extlinux/extlinux.conf

15:54:18.605 -> 175 bytes read in 8 ms (20.5 KiB/s)
15:54:18.605 -> 1:      Multitool
15:54:18.605 -> Retrieving file: /kernel.img
15:54:18.983 -> 8719272 bytes read in 384 ms (21.7 MiB/s)
15:54:18.983 -> append: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0
15:54:19.030 -> Retrieving file: /rk322x-box.dtb
15:54:19.030 -> 46636 bytes read in 8 ms (5.6 MiB/s)
15:54:19.030 -> ## Flattened Device Tree blob at 61f00000
15:54:19.030 ->    Booting using the fdt blob at 0x61f00000
15:54:19.078 -> EHCI failed to shut down host controller.
15:54:19.125 -> EHCI failed to shut down host controller.
15:54:19.172 ->    Loading Device Tree to 683f1000, end 683ff62b ... OK
15:54:19.172 ->
15:54:19.172 -> Starting kernel ...
15:54:19.172 ->
15:54:21.561 -> [    0.000000] Booting Linux on physical CPU 0xf00
15:54:21.561 -> [    0.000000] Initializing cgroup subsys cpuset
15:54:21.561 -> [    0.000000] Initializing cgroup subsys cpu
15:54:21.561 -> [    0.000000] Initializing cgroup subsys cpuacct
15:54:21.561 -> [    0.000000] Linux version 4.4.194-rk322x (root@armbianbuild) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #47 SMP Thu Apr 9 17:37:46 UTC 2020
15:54:21.561 -> [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
15:54:21.561 -> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
15:54:21.608 -> [    0.000000] Machine model: Generic RK322x TV Box board
15:54:21.608 -> [    0.000000] cma: Reserved 128 MiB at 0x98000000
15:54:21.608 -> [    0.000000] Memory policy: Data cache writealloc
15:54:21.608 -> [    0.000000] psci: probing for conduit method from DT.
15:54:21.608 -> [    0.000000] psci: PSCIv65535.65535 detected in firmware.
15:54:21.608 -> [    0.000000] psci: Using standard PSCI v0.2 function IDs
15:54:21.608 -> [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
15:54:21.608 -> [    0.000000] PERCPU: Embedded 14 pages/cpu @e7659000 s24856 r8192 d24296 u57344
15:54:21.654 -> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256256
15:54:21.654 -> [    0.000000] Kernel command line: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0
15:54:21.654 -> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
15:54:21.654 -> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
15:54:21.654 -> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
15:54:21.654 -> [    0.000000] Memory: 871700K/1034240K available (12820K kernel code, 875K rwdata, 3224K rodata, 796K init, 1219K bss, 31468K reserved, 131072K cma-reserved, 0K highmem)
15:54:21.702 -> [    0.000000] Virtual kernel memory layout:
15:54:21.702 -> [    0.000000]     vector : 0xffff0000 - 0xffff1000   (   4 kB)
15:54:21.702 -> [    0.000000]     fixmap : 0xffc00000 - 0xfff00000   (3072 kB)
15:54:21.702 -> [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
15:54:21.702 -> [    0.000000]     lowmem : 0xb0000000 - 0xf0000000   (1024 MB)
15:54:21.702 -> [    0.000000]     pkmap   : 0xafe00000 - 0xb0000000   (   2 MB)
15:54:21.702 -> [    0.000000]     modules : 0xaf000000 - 0xafe00000   ( 14 MB)
15:54:21.749 -> [    0.000000]       .text : 0xb0008000 - 0xb0c8d53c   (12822 kB)
15:54:21.749 -> [    0.000000]       .init : 0xb10a1000 - 0xb1168000   ( 796 kB)
15:54:21.749 -> [    0.000000]       .data : 0xb1168000 - 0xb1242e94   ( 876 kB)
15:54:21.749 -> [    0.000000]        .bss : 0xb1244000 - 0xb1374ee4   (1220 kB)
15:54:21.749 -> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
15:54:21.749 -> [    0.000000] Hierarchical RCU implementation.
15:54:21.749 -> [    0.000000] Build-time adjustment of leaf fanout to 32.
15:54:21.749 -> [    0.000000] NR_IRQS:16 nr_irqs:16 16
15:54:21.796 -> [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
15:54:21.796 -> [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
15:54:21.796 -> [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
15:54:21.796 -> [    0.000023] Switching to timer-based delay loop, resolution 41ns
15:54:21.796 -> [    0.001661] Console: colour dummy device 80x30
15:54:21.796 -> [    0.001692] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
15:54:21.796 -> [    0.001712] pid_max: default: 32768 minimum: 301
15:54:21.841 -> [    0.001844] Security Framework initialized
15:54:21.841 -> [    0.001858] Yama: becoming mindful.
15:54:21.841 -> [    0.001936] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
15:54:21.841 -> [    0.001952] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
15:54:21.841 -> [    0.002837] Initializing cgroup subsys io
15:54:21.841 -> [    0.002874] Initializing cgroup subsys memory

15:54:21.841 -> [    0.002915] Initializing cgroup subsys devices
15:54:21.841 -> [    0.002935] Initializing cgroup subsys freezer
15:54:21.841 -> [    0.002952] Initializing cgroup subsys net_cls
15:54:21.886 -> [    0.002968] Initializing cgroup subsys perf_event
15:54:21.886 -> [    0.002986] Initializing cgroup subsys net_prio
15:54:21.886 -> [    0.003014] Initializing cgroup subsys pids
15:54:21.886 -> [    0.003081] CPU: Testing write buffer coherency: ok
15:54:21.886 -> [    0.003128] ftrace: allocating 41720 entries in 123 pages
15:54:21.886 -> [    0.082051] /cpus/cpu@f00 missing clock-frequency property
15:54:21.886 -> [    0.082083] /cpus/cpu@f01 missing clock-frequency property
15:54:21.886 -> [    0.082101] /cpus/cpu@f02 missing clock-frequency property
15:54:21.886 -> [    0.082121] /cpus/cpu@f03 missing clock-frequency property
15:54:21.930 -> [    0.082133] CPU0: update cpu_capacity 430
15:54:21.930 -> [    0.082144] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
15:54:21.930 -> [    0.082224] Setting up static identity map for 0x60008280 - 0x600082d8
15:54:21.930 -> [    0.085025] CPU1: update cpu_capacity 430
15:54:21.930 -> [    0.085034] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
15:54:21.930 -> [    0.086130] CPU2: update cpu_capacity 430
15:54:21.930 -> [    0.086138] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
15:54:21.930 -> [    0.087156] CPU3: update cpu_capacity 430
15:54:21.930 -> [    0.087165] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
15:54:21.976 -> [    0.087299] Brought up 4 CPUs
15:54:21.976 -> [    0.087338] SMP: Total of 4 processors activated (192.00 BogoMIPS).
15:54:21.976 -> [    0.087345] CPU: All CPU(s) started in SVC mode.
15:54:21.976 -> [    0.088816] devtmpfs: initialized
15:54:21.976 -> [    0.106168] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
15:54:21.976 -> [    0.106689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
15:54:21.976 -> [    0.106725] futex hash table entries: 1024 (order: 4, 65536 bytes)
15:54:21.976 -> [    0.112706] xor: measuring software checksum speed
15:54:22.023 -> [    0.150047]    arm4regs : 1011.000 MB/sec
15:54:22.023 -> [    0.190152]    8regs     :   705.000 MB/sec
15:54:22.023 -> [    0.230252]    32regs    :   684.000 MB/sec
15:54:22.023 -> [    0.270356]    neon      : 1018.000 MB/sec
15:54:22.023 -> [    0.270366] xor: using function: neon (1018.000 MB/sec)
15:54:22.023 -> [    0.270402] pinctrl core: initialized pinctrl subsystem
15:54:22.023 -> [    0.271933] NET: Registered protocol family 16
15:54:22.023 -> [    0.274073] DMA: preallocated 2048 KiB pool for atomic coherent allocations
15:54:22.023 -> [    0.286512] cpuidle: using governor ladder
15:54:22.070 -> [    0.298524] cpuidle: using governor menu
15:54:22.070 -> [    0.320945] console [pstore-1] enabled
15:54:22.070 -> [    0.320956] pstore: Registered ramoops as persistent store backend
15:54:22.070 -> [    0.320968] ramoops: attached 0xf0000@0x62e00000, ecc: 0/0
15:54:22.070 -> [    0.323874] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
15:54:22.070 -> [    0.323894] hw-breakpoint: maximum watchpoint size is 8 bytes.
15:54:22.070 -> [    0.419374] raid6: int32x1 gen()   133 MB/s
15:54:22.070 -> [    0.487463] raid6: int32x1 xor()   131 MB/s
15:54:22.070 -> [    0.555691] raid6: int32x2 gen()   166 MB/s
15:54:22.070 -> [    0.623986] raid6: int32x2 xor()   137 MB/s
15:54:22.117 -> [    0.692112] raid6: int32x4 gen()   163 MB/s
15:54:22.117 -> [    0.760216] raid6: int32x4 xor()   136 MB/s
15:54:22.117 -> [    0.828519] raid6: int32x8 gen()   166 MB/s
15:54:22.117 -> [    0.896773] raid6: int32x8 xor()   113 MB/s
15:54:22.117 -> [    0.964915] raid6: neonx1   gen()   382 MB/s
15:54:22.117 -> [    1.033044] raid6: neonx1   xor()   290 MB/s
15:54:22.117 -> [    1.101249] raid6: neonx2   gen()   519 MB/s
15:54:22.117 -> [    1.169406] raid6: neonx2   xor()   376 MB/s
15:54:22.117 -> [    1.237608] raid6: neonx4   gen()   581 MB/s
15:54:22.117 -> [    1.305844] raid6: neonx4   xor()   400 MB/s
15:54:22.117 -> [    1.374113] raid6: neonx8   gen()   560 MB/s
15:54:22.164 -> [    1.442294] raid6: neonx8   xor()   391 MB/s
15:54:22.164 -> [    1.442307] raid6: using algorithm neonx4 gen() 581 MB/s
15:54:22.164 -> [    1.442316] raid6: .... xor() 400 MB/s, rmw enabled
15:54:22.164 -> [    1.442327] raid6: using intx1 recovery algorithm
15:54:22.164 -> [    1.443273] rockchip-pm rockchip-suspend: not set wakeup-config
15:54:22.164 -> [    1.443296] rockchip-pm rockchip-suspend: not set pwm-regulator-config
15:54:22.164 -> [    1.446679] iommu: Adding device 20020000.vpu-service to group 0
15:54:22.164 -> [    1.446782] iommu: Adding device 20030000.rkvdec to group 1
15:54:22.164 -> [    1.446874] iommu: Adding device 20050000.vop to group 2
15:54:22.211 -> [    1.446963] iommu: Adding device 20070000.iep to group 3
15:54:22.211 -> [    1.447489] rk_iommu 20020800.iommu: can't get sclk
15:54:22.211 -> [    1.448049] rk_iommu 20030480.iommu: can't get sclk

15:54:22.211 -> [    1.448285] rk_iommu 20053f00.iommu: can't get sclk
15:54:22.211 -> [    1.448427] rk_iommu 20070800.iommu: can't get aclk
15:54:22.211 -> [    1.448446] rk_iommu 20070800.iommu: can't get hclk
15:54:22.211 -> [    1.448462] rk_iommu 20070800.iommu: can't get sclk
15:54:22.211 -> [    1.449202] SCSI subsystem initialized
15:54:22.211 -> [    1.449598] usbcore: registered new interface driver usbfs
15:54:22.258 -> [    1.449696] usbcore: registered new interface driver hub
15:54:22.258 -> [    1.449812] usbcore: registered new device driver usb
15:54:22.258 -> [    1.450025] media: Linux media interface: v0.10
15:54:22.258 -> [    1.450105] Linux video capture interface: v2.00
15:54:22.258 -> [    1.450368] pps_core: LinuxPPS API ver. 1 registered
15:54:22.258 -> [    1.450384] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
15:54:22.258 -> [    1.450425] PTP clock support registered
15:54:22.258 -> [    1.452266] Advanced Linux Sound Architecture Driver Initialized.
15:54:22.258 -> [    1.453330] Bluetooth: Core ver 2.21
15:54:22.258 -> [    1.453396] NET: Registered protocol family 31
15:54:22.305 -> [    1.453409] Bluetooth: HCI device and connection manager initialized
15:54:22.305 -> [    1.453430] Bluetooth: HCI socket layer initialized
15:54:22.305 -> [    1.453447] Bluetooth: L2CAP socket layer initialized
15:54:22.305 -> [    1.453499] Bluetooth: SCO socket layer initialized
15:54:22.305 -> [    1.454254] NetLabel: Initializing
15:54:22.305 -> [    1.454274] NetLabel: domain hash size = 128
15:54:22.305 -> [    1.454283] NetLabel: protocols = UNLABELED CIPSOv4
15:54:22.305 -> [    1.454410] NetLabel: unlabeled traffic allowed by default
15:54:22.305 -> [    1.455411] clocksource: Switched to clocksource arch_sys_counter
15:54:22.351 -> [    1.550151] NET: Registered protocol family 2
15:54:22.351 -> [    1.551000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
15:54:22.351 -> [    1.551115] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
15:54:22.351 -> [    1.551551] TCP: Hash tables configured (established 8192 bind 8192)
15:54:22.351 -> [    1.551657] UDP hash table entries: 512 (order: 2, 24576 bytes)
15:54:22.351 -> [    1.551727] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
15:54:22.351 -> [    1.552081] NET: Registered protocol family 1
15:54:22.396 -> [    1.552706] RPC: Registered named UNIX socket transport module.
15:54:22.396 -> [    1.552727] RPC: Registered udp transport module.
15:54:22.396 -> [    1.552737] RPC: Registered tcp transport module.
15:54:22.396 -> [    1.552748] RPC: Registered tcp NFSv4.1 backchannel transport module.
15:54:22.396 -> [    1.553596] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
15:54:22.396 -> [    1.556542] Initialise system trusted keyring
15:54:22.396 -> [    1.570656] VFS: Disk quotas dquot_6.6.0
15:54:22.396 -> [    1.570966] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
15:54:22.443 -> [    1.573763] squashfs: version 4.0 (2009/01/31) Phillip Lougher
15:54:22.443 -> [    1.577302] NFS: Registering the id_resolver key type
15:54:22.443 -> [    1.577376] Key type id_resolver registered
15:54:22.443 -> [    1.577388] Key type id_legacy registered
15:54:22.443 -> [    1.577419] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
15:54:22.443 -> [    1.577512] ntfs: driver 2.1.32 [Flags: R/W].
15:54:22.443 -> [    1.578434] JFS: nTxBlock = 7834, nTxLock = 62673
15:54:22.443 -> [    1.587341] SGI XFS with security attributes, no debug enabled
15:54:22.443 -> [    1.596093] NET: Registered protocol family 38
15:54:22.443 -> [    1.596149] Key type asymmetric registered
15:54:22.490 -> [    1.596171] Asymmetric key parser 'x509' registered
15:54:22.490 -> [    1.596563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
15:54:22.490 -> [    1.596827] io scheduler noop registered
15:54:22.490 -> [    1.596856] io scheduler deadline registered
15:54:22.490 -> [    1.596934] io scheduler cfq registered (default)
15:54:22.490 -> [    1.600041] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator
15:54:22.490 -> [    1.604964] rk-vcodec 20020000.vpu-service: no regulator for vcodec
15:54:22.490 -> [    1.605405] rk-vcodec 20020000.vpu-service: probe device
15:54:22.537 -> [    1.605823] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled
15:54:22.537 -> [    1.607041] rk-vcodec 20020000.vpu-service: could not find power_model node
15:54:22.537 -> [    1.607066] rk-vcodec 20020000.vpu-service: init success
15:54:22.537 -> [    1.607381] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry
15:54:22.537 -> [    1.611670] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330
15:54:22.537 -> [    1.611697] dma-pl330 110f0000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
15:54:22.537 -> [    1.612754] rockchip-system-monitor rockchip-system-monitor: system monitor probe

15:54:22.537 -> [    1.614995] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
15:54:22.585 -> [    1.615870] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 30, base_baud = 1500000) is a 16550A
15:54:22.585 -> [    2.647633] console [ttyS2] enabled
15:54:22.585 -> [    2.652894] [drm] Initialized drm 1.1.0 20060810
15:54:22.585 -> [    2.660008] [drm] Rockchip DRM driver version: v1.0.1
15:54:22.585 -> [    2.665339] rockchip-drm display-subsystem: devfreq is not set
15:54:22.585 -> [    2.671976] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xb0d111b0)
15:54:22.632 -> [    2.679736] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports
15:54:22.632 -> [    2.686400] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver
15:54:22.632 -> [    2.694253] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy)
15:54:22.632 -> [    2.705204] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xb0d09708)
15:54:22.632 -> [    2.712680] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
15:54:22.632 -> [    2.719317] [drm] No driver support for vblank timestamp query.
15:54:22.632 -> [    2.725367] rockchip-drm display-subsystem: failed to parse display resources
15:54:23.385 -> [    3.355239] rockchip-vop 20050000.vop: [drm:vop_crtc_enable] Update mode to 1440x900p60, type: 11
15:54:23.385 -> [    3.356074] dwhdmi-rockchip 200a0000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
15:54:23.385 -> [    3.356082] dwhdmi-rockchip 200a0000.hdmi:     colorspace: RGB
15:54:23.385 -> [    3.356090] dwhdmi-rockchip 200a0000.hdmi:     scan mode: Underscan
15:54:23.385 -> [    3.356096] dwhdmi-rockchip 200a0000.hdmi:     colorimetry: No Data
15:54:23.432 -> [    3.356103] dwhdmi-rockchip 200a0000.hdmi:     picture aspect: No Data
15:54:23.432 -> [    3.356110] dwhdmi-rockchip 200a0000.hdmi:     active aspect: Same as Picture
15:54:23.432 -> [    3.356116] dwhdmi-rockchip 200a0000.hdmi:     itc: IT Content
15:54:23.432 -> [    3.356123] dwhdmi-rockchip 200a0000.hdmi:     extended colorimetry: xvYCC 601
15:54:23.432 -> [    3.356129] dwhdmi-rockchip 200a0000.hdmi:     quantization range: Full
15:54:23.432 -> [    3.356136] dwhdmi-rockchip 200a0000.hdmi:     nups: Unknown Non-uniform Scaling
15:54:23.479 -> [    3.356142] dwhdmi-rockchip 200a0000.hdmi:     video code: 0
15:54:23.479 -> [    3.356148] dwhdmi-rockchip 200a0000.hdmi:     ycc quantization range: Full
15:54:23.479 -> [    3.356155] dwhdmi-rockchip 200a0000.hdmi:     hdmi content type: Graphics
15:54:23.479 -> [    3.356161] dwhdmi-rockchip 200a0000.hdmi:     pixel repeat: 0
15:54:23.479 -> [    3.356169] dwhdmi-rockchip 200a0000.hdmi:     bar top 0, bottom 0, left 0, right 0
15:54:23.479 -> [    3.414763] Console: switching to colour frame buffer device 180x56
15:54:23.479 -> [    3.565970] rockchip-drm display-subsystem: fb0: frame buffer device
15:54:23.526 -> [    3.594167] brd: module loaded
15:54:23.526 -> [    3.608474] loop: module loaded
15:54:23.526 -> [    3.611724] lkdtm: No crash points registered, enable through debugfs
15:54:23.574 -> [    3.620886] libphy: Fixed MDIO Bus: probed
15:54:23.574 -> [    3.625091] tun: Universal TUN/TAP device driver, 1.6
15:54:23.574 -> [    3.630182] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
15:54:23.574 -> [    3.636753] CAN device driver interface
15:54:23.574 -> [    3.642049] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output).
15:54:23.574 -> [    3.649236] rk_gmac-dwmac 30200000.ethernet: TX delay(0x30).
15:54:23.574 -> [    3.654922] rk_gmac-dwmac 30200000.ethernet: RX delay(0x10).
15:54:23.574 -> [    3.660656] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes).
15:54:23.574 -> [    3.667108] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed
15:54:23.621 -> [    3.679169] rk_gmac-dwmac 30200000.ethernet: init for RMII
15:54:23.668 -> [    3.719534] stmmac - user ID: 0x10, Synopsys ID: 0x35
15:54:23.668 -> [    3.724636] Ring mode enabled
15:54:23.668 -> [    3.727719] DMA HW capability register supported
15:54:23.668 -> [    3.732266] Normal descriptors
15:54:23.668 -> [    3.735612] RX Checksum Offload Engine supported (type 2)
15:54:23.668 -> [    3.741119] TX Checksum insertion supported
15:54:23.668 -> [    3.745405] Wake-Up On Lan supported
15:54:23.668 -> [    3.749193] rk_gmac-dwmac 30200000.ethernet: rk_get_eth_addr: mac address: fa:03:39:88:c3:e7
15:54:23.668 -> [    3.757665] eth%d: device MAC address fa:03:39:88:c3:e7
15:54:23.716 -> [    3.762932] Enable RX Mitigation via HW Watchdog Timer
15:54:23.716 -> [    3.785132] libphy: stmmac: probed
15:54:23.716 -> [    3.788618] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active
15:54:23.716 -> [    3.795253] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
15:54:23.716 -> [    3.801119] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
15:54:23.716 -> [    3.806989] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
15:54:23.762 -> [    3.812845] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
15:54:23.762 -> [    3.818698] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
15:54:23.762 -> [    3.824560] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
15:54:23.762 -> [    3.830412] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)

15:54:23.762 -> [    3.836264] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
15:54:23.762 -> [    3.842127] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
15:54:23.762 -> [    3.847981] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
15:54:23.762 -> [    3.853919] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
15:54:23.807 -> [    3.859867] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
15:54:23.807 -> [    3.865806] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
15:54:23.807 -> [    3.871745] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
15:54:23.807 -> [    3.877692] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
15:54:23.807 -> [    3.883630] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
15:54:23.807 -> [    3.889566] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
15:54:23.807 -> [    3.895515] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
15:54:23.807 -> [    3.901454] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
15:54:23.852 -> [    3.907425] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
15:54:23.852 -> [    3.913370] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
15:54:23.852 -> [    3.919313] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
15:54:23.852 -> [    3.925266] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
15:54:23.852 -> [    3.931209] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
15:54:23.852 -> [    3.937154] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
15:54:23.852 -> [    3.943104] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
15:54:23.897 -> [    3.949048] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
15:54:23.897 -> [    3.954988] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
15:54:23.897 -> [    3.960959] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
15:54:23.897 -> [    3.966904] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
15:54:23.897 -> [    3.972845] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
15:54:23.897 -> [    3.980394] PPP generic driver version 2.4.2
15:54:23.897 -> [    3.985213] Atmel at76x USB Wireless LAN Driver 0.17 loading
15:54:23.897 -> [    3.991078] usbcore: registered new interface driver at76c50x-usb
15:54:23.943 -> [    3.997405] usbcore: registered new interface driver rtl8187
15:54:23.943 -> [    4.003273] usbcore: registered new interface driver rndis_wlan
15:54:23.943 -> [    4.009350] usbcore: registered new interface driver zd1201
15:54:23.943 -> [    4.015357] usbcore: registered new interface driver rt2800usb
15:54:23.943 -> [    4.021408] Rockchip WiFi SYS interface (V1.00) ...
15:54:23.943 -> [    4.026476] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
15:54:23.943 -> [    4.033987] usbcore: registered new interface driver pegasus
15:54:23.990 -> [    4.039779] usbcore: registered new interface driver rtl8150
15:54:23.990 -> [    4.045549] usbcore: registered new interface driver r8152
15:54:23.990 -> [    4.051159] usbcore: registered new interface driver asix
15:54:23.990 -> [    4.056679] usbcore: registered new interface driver ax88179_178a
15:54:23.990 -> [    4.062881] usbcore: registered new interface driver cdc_ether
15:54:23.990 -> [    4.068819] usbcore: registered new interface driver dm9601
15:54:23.990 -> [    4.074512] usbcore: registered new interface driver smsc75xx
15:54:23.990 -> [    4.080383] usbcore: registered new interface driver smsc95xx
15:54:23.990 -> [    4.086224] usbcore: registered new interface driver net1080
15:54:24.038 -> [    4.092033] usbcore: registered new interface driver rndis_host
15:54:24.038 -> [    4.098078] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
15:54:24.038 -> [    4.105652] usbcore: registered new interface driver cdc_ncm
15:54:24.038 -> [    4.111448] usbcore: registered new interface driver cdc_mbim
15:54:24.038 -> [    4.117708] 30040000.usb supply vusb_d not found, using dummy regulator
15:54:24.038 -> [    4.124448] 30040000.usb supply vusb_a not found, using dummy regulator
15:54:24.085 -> [    4.144265] dwc2 30040000.usb: DWC OTG Controller
15:54:24.085 -> [    4.149086] dwc2 30040000.usb: new USB bus registered, assigned bus number 1
15:54:24.085 -> [    4.156213] dwc2 30040000.usb: irq 49, io mem 0x30040000
15:54:24.085 -> [    4.161877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
15:54:24.085 -> [    4.168705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.085 -> [    4.175949] usb usb1: Product: DWC OTG Controller
15:54:24.131 -> [    4.180675] usb usb1: Manufacturer: Linux 4.4.194-rk322x dwc2_hsotg
15:54:24.131 -> [    4.186960] usb usb1: SerialNumber: 30040000.usb
15:54:24.131 -> [    4.192632] hub 1-0:1.0: USB hub found
15:54:24.131 -> [    4.196543] hub 1-0:1.0: 1 port detected
15:54:24.131 -> [    4.202057] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
15:54:24.131 -> [    4.208701] ehci-platform: EHCI generic platform driver
15:54:24.131 -> [    4.216542] ehci-platform 30080000.usb: EHCI Host Controller
15:54:24.131 -> [    4.222633] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2
15:54:24.176 -> [    4.230796] ehci-platform 30080000.usb: irq 50, io mem 0x30080000

15:54:24.176 -> [    4.247475] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00
15:54:24.176 -> [    4.253979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
15:54:24.176 -> [    4.260812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.176 -> [    4.268059] usb usb2: Product: EHCI Host Controller
15:54:24.223 -> [    4.272958] usb usb2: Manufacturer: Linux 4.4.194-rk322x ehci_hcd
15:54:24.223 -> [    4.279071] usb usb2: SerialNumber: 30080000.usb
15:54:24.223 -> [    4.284631] hub 2-0:1.0: USB hub found
15:54:24.223 -> [    4.288535] hub 2-0:1.0: 1 port detected
15:54:24.223 -> [    4.295514] ehci-platform 300c0000.usb: EHCI Host Controller
15:54:24.223 -> [    4.301803] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3
15:54:24.223 -> [    4.309953] ehci-platform 300c0000.usb: irq 52, io mem 0x300c0000
15:54:24.270 -> [    4.327473] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00
15:54:24.270 -> [    4.334009] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
15:54:24.270 -> [    4.340845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.270 -> [    4.348091] usb usb3: Product: EHCI Host Controller
15:54:24.270 -> [    4.352990] usb usb3: Manufacturer: Linux 4.4.194-rk322x ehci_hcd
15:54:24.270 -> [    4.359099] usb usb3: SerialNumber: 300c0000.usb
15:54:24.270 -> [    4.364667] hub 3-0:1.0: USB hub found
15:54:24.317 -> [    4.368566] hub 3-0:1.0: 1 port detected
15:54:24.317 -> [    4.375522] ehci-platform 30100000.usb: EHCI Host Controller
15:54:24.317 -> [    4.381593] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4
15:54:24.317 -> [    4.389775] ehci-platform 30100000.usb: irq 54, io mem 0x30100000
15:54:24.317 -> [    4.407473] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00
15:54:24.364 -> [    4.413964] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
15:54:24.364 -> [    4.420793] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.364 -> [    4.428037] usb usb4: Product: EHCI Host Controller
15:54:24.364 -> [    4.432937] usb usb4: Manufacturer: Linux 4.4.194-rk322x ehci_hcd
15:54:24.364 -> [    4.439049] usb usb4: SerialNumber: 30100000.usb
15:54:24.364 -> [    4.444648] hub 4-0:1.0: USB hub found
15:54:24.364 -> [    4.448556] hub 4-0:1.0: 1 port detected
15:54:24.364 -> [    4.453345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
15:54:24.412 -> [    4.459661] ohci-platform: OHCI generic platform driver
15:54:24.412 -> [    4.465326] ohci-platform 300a0000.usb: Generic Platform OHCI controller
15:54:24.412 -> [    4.473490] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5
15:54:24.412 -> [    4.481653] ohci-platform 300a0000.usb: irq 51, io mem 0x300a0000
15:54:24.457 -> [    4.547780] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
15:54:24.504 -> [    4.554630] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.504 -> [    4.561886] usb usb5: Product: Generic Platform OHCI controller
15:54:24.504 -> [    4.567837] usb usb5: Manufacturer: Linux 4.4.194-rk322x ohci_hcd
15:54:24.504 -> [    4.573951] usb usb5: SerialNumber: 300a0000.usb
15:54:24.504 -> [    4.579774] hub 5-0:1.0: USB hub found
15:54:24.504 -> [    4.583675] hub 5-0:1.0: 1 port detected
15:54:24.504 -> [    4.588511] ohci-platform 300e0000.usb: Generic Platform OHCI controller
15:54:24.504 -> [    4.595642] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6
15:54:24.550 -> [    4.603823] ohci-platform 300e0000.usb: irq 53, io mem 0x300e0000
15:54:24.598 -> [    4.667719] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
15:54:24.598 -> [    4.674553] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.598 -> [    4.681815] usb usb6: Product: Generic Platform OHCI controller
15:54:24.598 -> [    4.687764] usb usb6: Manufacturer: Linux 4.4.194-rk322x ohci_hcd
15:54:24.645 -> [    4.693875] usb usb6: SerialNumber: 300e0000.usb
15:54:24.645 -> [    4.699959] hub 6-0:1.0: USB hub found
15:54:24.645 -> [    4.703866] hub 6-0:1.0: 1 port detected
15:54:24.645 -> [    4.708697] ohci-platform 30120000.usb: Generic Platform OHCI controller
15:54:24.645 -> [    4.715826] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7
15:54:24.645 -> [    4.723931] ohci-platform 30120000.usb: irq 55, io mem 0x30120000
15:54:24.740 -> [    4.787706] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
15:54:24.740 -> [    4.794534] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
15:54:24.740 -> [    4.801780] usb usb7: Product: Generic Platform OHCI controller
15:54:24.740 -> [    4.807740] usb usb7: Manufacturer: Linux 4.4.194-rk322x ohci_hcd
15:54:24.740 -> [    4.813861] usb usb7: SerialNumber: 30120000.usb
15:54:24.740 -> [    4.819837] hub 7-0:1.0: USB hub found
15:54:24.740 -> [    4.823738] hub 7-0:1.0: 1 port detected
15:54:24.740 -> [    4.828674] usbcore: registered new interface driver cdc_acm
15:54:24.740 -> [    4.834387] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

15:54:24.787 -> [    4.842570] usbcore: registered new interface driver cdc_wdm
15:54:24.787 -> [    4.848575] usbcore: registered new interface driver usb-storage
15:54:24.787 -> [    4.854797] usbcore: registered new interface driver usbserial
15:54:24.787 -> [    4.860738] usbcore: registered new interface driver usbserial_generic
15:54:24.787 -> [    4.867343] usbserial: USB Serial support registered for generic
15:54:24.787 -> [    4.873462] usbcore: registered new interface driver keyspan
15:54:24.787 -> [    4.879197] usbserial: USB Serial support registered for Keyspan - (without firmware)
15:54:24.835 -> [    4.887096] usbserial: USB Serial support registered for Keyspan 1 port adapter
15:54:24.835 -> [    4.894467] usbserial: USB Serial support registered for Keyspan 2 port adapter
15:54:24.835 -> [    4.901839] usbserial: USB Serial support registered for Keyspan 4 port adapter
15:54:24.835 -> [    4.909261] usbcore: registered new interface driver option
15:54:24.835 -> [    4.914904] usbserial: USB Serial support registered for GSM modem (1-port)
15:54:24.835 -> [    4.922639] usbcore: registered new interface driver oti6858
15:54:24.835 -> [    4.928563] usbserial: USB Serial support registered for oti6858
15:54:24.882 -> [    4.934711] usbcore: registered new interface driver qcserial
15:54:24.882 -> [    4.940540] usbserial: USB Serial support registered for Qualcomm USB modem
15:54:24.882 -> [    4.947688] usbcore: registered new interface driver sierra
15:54:24.882 -> [    4.953337] usbserial: USB Serial support registered for Sierra USB modem
15:54:24.882 -> [    4.961115] usbcore: registered new interface driver iforce
15:54:24.882 -> [    4.966890] usbcore: registered new interface driver xpad
15:54:24.882 -> [    4.972577] usbcore: registered new interface driver usbtouchscreen
15:54:24.929 -> [    4.980051] i2c /dev entries driver
15:54:24.929 -> [    4.986418] usbcore: registered new interface driver uvcvideo
15:54:24.929 -> [    4.992224] USB Video Class driver (1.1.1)
15:54:24.929 -> [    4.998214] Boot mode: normal
15:54:24.929 -> [    5.002548] rockchip-thermal 11150000.tsadc: tsadc is probed successfully!
15:54:24.929 -> [    5.011073] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
15:54:24.929 -> [    5.020067] Bluetooth: Virtual HCI driver ver 1.5
15:54:24.975 -> [    5.025176] Bluetooth: HCI UART driver ver 2.3
15:54:24.975 -> [    5.029684] Bluetooth: HCI UART protocol H4 registered
15:54:24.975 -> [    5.034859] Bluetooth: HCI UART protocol LL registered
15:54:24.975 -> [    5.040037] Bluetooth: HCI UART protocol ATH3K registered
15:54:24.975 -> [    5.045468] Bluetooth: HCI UART protocol Three-wire (H5) registered
15:54:24.975 -> [    5.052002] Bluetooth: HCI UART protocol BCM registered
15:54:24.975 -> [    5.057417] usbcore: registered new interface driver bfusb
15:54:24.975 -> [    5.063162] usbcore: registered new interface driver btusb
15:54:24.975 -> [    5.068699] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
15:54:25.022 -> [    5.075006] cpu cpu0: leakage=3
15:54:25.022 -> [    5.078254] cpu cpu0: leakage-volt-sel=0
15:54:25.022 -> [    5.082388] cpu cpu0: Failed to get pvtm
15:54:25.022 -> [    5.087872] cpu cpu0: avs=0
15:54:25.022 -> [    5.090745] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0
15:54:25.022 -> [    5.097811] cpu cpu0: failed to read out thermal zone (-22)
15:54:25.022 -> [    5.104064] cpu cpu0: failed to find power_model node
15:54:25.022 -> [    5.109858] Synopsys Designware Multimedia Card Interface Driver
15:54:25.022 -> [    5.116582] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode.
15:54:25.068 -> [    5.123973] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller.
15:54:25.068 -> [    5.130838] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a
15:54:25.068 -> [    5.136700] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo
15:54:25.068 -> [    5.146604] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found
15:54:25.068 -> [    5.152830] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found
15:54:25.068 -> [    5.159236] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO
15:54:25.115 -> [    5.177338] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
15:54:25.115 -> [    5.199524] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized
15:54:25.115 -> [    5.205870] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available
15:54:25.163 -> [    5.215254] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode.
15:54:25.163 -> [    5.222646] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller.
15:54:25.163 -> [    5.229525] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a
15:54:25.163 -> [    5.231442] usb 7-1: new low-speed USB device number 2 using ohci-platform
15:54:25.163 -> [    5.242370] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo
15:54:25.163 -> [    5.252250] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found
15:54:25.209 -> [    5.258489] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found
15:54:25.209 -> [    5.277728] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 400000Hz, actual 244140HZ div = 2)
15:54:25.209 -> [    5.299658] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized

15:54:25.257 -> [    5.305913] dwmmc_rockchip 30020000.dwmmc: IDMAC supports 32-bit address mode.
15:54:25.257 -> [    5.313423] dwmmc_rockchip 30020000.dwmmc: Using internal DMA controller.
15:54:25.257 -> [    5.320299] dwmmc_rockchip 30020000.dwmmc: Version ID is 270a
15:54:25.257 -> [    5.326208] dwmmc_rockchip 30020000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo
15:54:25.257 -> [    5.336088] dwmmc_rockchip 30020000.dwmmc: 'clock-freq-min-max' property was deprecated.
15:54:25.257 -> [    5.344342] dwmmc_rockchip 30020000.dwmmc: No vmmc regulator found
15:54:25.257 -> [    5.350576] dwmmc_rockchip 30020000.dwmmc: No vqmmc regulator found
15:54:25.305 -> [    5.367605] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
15:54:25.305 -> [    5.377477] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
15:54:25.305 -> [    5.377516] mmc0: new high speed SDXC card at address aaaa
15:54:25.305 -> [    5.378384] mmcblk0: mmc0:aaaa SC64G 59.5 GiB
15:54:25.305 -> [    5.382535] mmcblk0: p1 p2
15:54:25.305 -> [    5.391332] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 300000Hz, actual 244140HZ div = 2)
15:54:25.352 -> [    5.421456] dwmmc_rockchip 30020000.dwmmc: 1 slots initialized
15:54:25.352 -> [    5.428506] ledtrig-cpu: registered to indicate activity on CPUs
15:54:25.352 -> [    5.434808] hidraw: raw HID events driver (C) Jiri Kosina
15:54:25.352 -> [    5.440525] usb 7-1: New USB device found, idVendor=1c4f, idProduct=0002
15:54:25.397 -> [    5.443504] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 200000Hz, actual 162760HZ div = 3)
15:54:25.397 -> [    5.454203] usbcore: registered new interface driver usbhid
15:54:25.397 -> [    5.454207] usbhid: USB HID core driver
15:54:25.397 -> [    5.454717] ashmem: initialized
15:54:25.397 -> [    5.457326] rknandbase v1.2 2018-05-08
15:54:25.397 -> [    5.457679] rknand 30030000.nandc: rknand_probe clk rate = 150000000
15:54:25.397 -> [    5.457920] No.1 FLASH ID:2c 88 4 4b a9 0
15:54:25.397 -> [    5.457966] No.1 FLASH ID:2c 88 4 4b a9 0
15:54:25.397 -> [    5.458544] ECC:60
15:54:25.397 -> [    5.458563] FTL version: 5.0.57 20190828
15:54:25.442 -> [    5.493364] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
15:54:25.442 -> [    5.500522] usb 7-1: Product: USB Keyboard
15:54:25.442 -> [    5.501116] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 100000Hz, actual 97656HZ div = 5)
15:54:25.442 -> [    5.513784] usb 7-1: Manufacturer: SIGMACHIP
15:54:25.442 -> [    5.526284] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.0/0003:1C4F:0002.0001/input/input0
15:54:25.490 -> [    5.572366] ftl_init 0
15:54:25.490 -> [    5.577013] secureBootEn check error
15:54:25.490 -> [    5.584913] vendor storage 524b5644,2,2
15:54:25.537 -> [    5.592030] vendor storage 524b5644,3,3
15:54:25.537 -> [    5.592469] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input0
15:54:25.537 -> [    5.599531] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.1/0003:1C4F:0002.0002/input/input1
15:54:25.537 -> [    5.622990] rknand vendor storage init ok !
15:54:25.537 -> [    5.628217] usbcore: registered new interface driver snd-usb-audio
15:54:25.584 -> [    5.634562] usbcore: registered new interface driver snd-ua101
15:54:25.584 -> [    5.640541] usbcore: registered new interface driver snd-usb-caiaq
15:54:25.584 -> [    5.646851] usbcore: registered new interface driver snd-usb-6fire
15:54:25.584 -> [    5.653170] usbcore: registered new interface driver snd-usb-hiface
15:54:25.584 -> [    5.655932] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input1
15:54:25.584 -> [    5.671729] usbcore: registered new interface driver snd-bcd2000
15:54:25.584 -> [    5.677853] usbcore: registered new interface driver snd_usb_pod
15:54:25.632 -> [    5.683960] usbcore: registered new interface driver snd_usb_podhd
15:54:25.632 -> [    5.690232] usbcore: registered new interface driver snd_usb_toneport
15:54:25.632 -> [    5.696760] usbcore: registered new interface driver snd_usb_variax
15:54:25.632 -> [    5.707256] u32 classifier
15:54:25.632 -> [    5.710021]     input device check on
15:54:25.632 -> [    5.713700]     Actions configured
15:54:25.632 -> [    5.717128] Netfilter messages via NETLINK v0.30.
15:54:25.632 -> [    5.721873] nfnl_acct: registering with nfnetlink.
15:54:25.680 -> [    5.726765] nf_conntrack version 0.5.0 (15668 buckets, 62672 max)
15:54:25.680 -> [    5.733618] Initializing XFRM netlink socket
15:54:25.680 -> [    5.738794] NET: Registered protocol family 10
15:54:25.680 -> [    5.744496] ip6_tables: (C) 2000-2006 Netfilter Core Team
15:54:25.680 -> [    5.750305] sit: IPv6 over IPv4 tunneling driver
15:54:25.680 -> [    5.755738] NET: Registered protocol family 17
15:54:25.680 -> [    5.760250] NET: Registered protocol family 15
15:54:25.680 -> [    5.764775] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
15:54:25.727 -> [    5.777415] Bridge firewalling registered

15:54:25.727 -> [    5.781445] can: controller area network core (rev 20120528 abi 9)
15:54:25.727 -> [    5.787700] NET: Registered protocol family 29
15:54:25.727 -> [    5.792170] can: raw protocol (rev 20120528)
15:54:25.727 -> [    5.796457] can: broadcast manager protocol (rev 20120528 t)
15:54:25.727 -> [    5.802137] can: netlink gateway (rev 20130117) max_hops=1
15:54:25.727 -> [    5.808039] Bluetooth: RFCOMM TTY layer initialized
15:54:25.727 -> [    5.813043] Bluetooth: RFCOMM socket layer initialized
15:54:25.727 -> [    5.818229] Bluetooth: RFCOMM ver 1.11
15:54:25.727 -> [    5.822014] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
15:54:25.773 -> [    5.827956] Bluetooth: HIDP socket layer initialized
15:54:25.773 -> [    5.832995] 8021q: 802.1Q VLAN Support v1.8
15:54:25.773 -> [    5.837227] lib80211: common routines for IEEE802.11 drivers
15:54:25.773 -> [    5.842966] [WLAN_RFKILL]: Enter rfkill_wlan_init
15:54:25.773 -> [    5.847981] [BT_RFKILL]: Enter rfkill_rk_init
15:54:25.773 -> [    5.852588] Key type dns_resolver registered
15:54:25.773 -> [    5.857178] flash vendor_init_thread!
15:54:25.773 -> [    5.857249] Error: Driver 'sc031gs' is already registered, aborting...
15:54:25.773 -> [    5.857673] Registering SWP/SWPB emulation handler
15:54:25.819 -> [    5.858613] registered taskstats version 1
15:54:25.819 -> [    5.858629] Loading compiled-in X.509 certificates
15:54:25.819 -> [    5.861160] Btrfs loaded
15:54:25.819 -> [    5.862138] rga2: Driver loaded successfully ver:4.01
15:54:25.819 -> [    5.862304] rga2: Module initialized.
15:54:25.819 -> [    5.862326] pvtm list NULL
15:54:25.819 -> [    5.863306] rk-vcodec 20030000.rkvdec: leakage=3
15:54:25.819 -> [    5.863321] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0
15:54:25.819 -> [    5.863469] rk-vcodec 20030000.rkvdec: Failed to get pvtm
15:54:25.819 -> [    5.863818] rk-vcodec 20030000.rkvdec: avs=0
15:54:25.866 -> [    5.864055] rk-vcodec 20030000.rkvdec: probe device
15:54:25.866 -> [    5.864458] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled
15:54:25.866 -> [    5.865614] rk-vcodec 20030000.rkvdec: init success
15:54:25.866 -> [    5.867328] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok
15:54:25.866 -> [    5.869870] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok
15:54:25.866 -> [    5.871716] hctosys: unable to open rtc device (rtc0)
15:54:25.866 -> [    5.883618] ALSA device list:
15:54:25.866 -> [    5.883625]   #0: DW-I2S-HDMI
15:54:25.866 -> [    5.883628]   #1: SPDIF
15:54:25.866 -> [    5.959428] flash vendor storage:20170308 ret = -1
15:54:25.913 -> [    5.964473] ttyS2 - failed to request DMA, use interrupt mode
15:54:25.913 -> [    5.976316] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored
15:54:25.913 -> [    5.983841] squashfs: SQUASHFS error: unable to read xattr id index table
15:54:25.913 -> [    5.994391] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
15:54:25.913 -> [    6.005547] devtmpfs: mounted
15:54:25.961 -> [    6.009446] Freeing unused kernel memory: 796K
15:54:25.961 -> [    6.013918] This architecture does not have kernel memory protection.
15:54:27.089 -> [    7.153468] random: dropbear: uninitialized urandom read (32 bytes read, 38 bits of entropy available)
15:54:27.137 ->

15:54:27.137 -> Debian GNU/Linux 10 multitool ttyS2
15:54:27.137 ->
15:54:27.137 -> multitool login: root (automatic login)
15:54:27.137 ->

15:54:27.325 -> sh: 1: cannot create /run/motd.dynamic.new: Read-only file system
15:54:27.325 ->
15:54:27.325 -> The programs included with the Debian GNU/Linux system are free software;
15:54:27.325 -> the exact distribution terms for each program are described in the
15:54:27.325 -> individual files in /usr/share/doc/*/copyright.
15:54:27.325 ->
15:54:27.325 -> Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
15:54:27.325 -> permitted by applicable law.
15:54:27.325 -> -bash: cannot set terminal process group (-1): Inappropriate ioctl for device
15:54:27.325 -> -bash: no job control in this shell
15:54:27.419 -> root@multitool:~# [ 8.879474] vendor storage:20190527 ret = -1

15:54:32.437 -> [ 12.530244] random: nonblocking pool is initialized
15:55:13.078 -> [/^``DW0Dսշнջb

*** I Started it again ***

DDR Version V1.10 20190926
16:06:27.813 -> In
16:06:27.813 -> ID:0xFFF
16:06:27.813 -> 660MHz
16:06:27.813 -> DDR3
16:06:27.813 -> Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
16:06:27.813 -> mach:2
16:06:27.813 -> OUT
16:06:27.859 -> Boot1 Release Time: May 13 2019 17:02:59, version: 2.56
16:06:27.859 -> ChipType = 0xc, 268
16:06:27.859 -> No.1 FLASH ID:2c 88 4 4b a9 0
16:06:27.859 -> ECC:60
16:06:27.859 -> FTL version: 5.0.56 20190508
16:06:28.281 -> mmc0:cmd5,20
16:06:28.422 -> SdmmcInit=0 0
16:06:28.422 -> BootCapSize=0
16:06:28.422 -> UserCapSize=60906MB
16:06:28.422 -> FwPartOffset=2000 , 0
16:06:28.422 -> StorageInit ok = 544626
16:06:28.468 -> SecureMode = 0
16:06:28.468 -> SecureInit ret = 0, SecureMode = 0
16:06:28.468 -> atags_set_bootdev: ret:(0)
16:06:28.468 -> GPT 0x63337df8 signature is wrong
16:06:28.468 -> recovery gpt...
16:06:28.468 -> GPT 0x63337df8 signature is wrong
16:06:28.468 -> recovery gpt fail!
16:06:28.468 -> tag:LOADER error,addr:0x2000
16:06:28.468 -> hdr 633377e0 + 0x0:0x00000000,0x00000000,0x00000000,0x00000000,
16:06:28.516 -> LOADER Check OK! 0x61000000, 672172
16:06:28.562 -> tag:TOS error,addr:0x4000
16:06:28.562 -> hdr 633377e0 + 0x0:0x44414f4c,0x20205245,0x00000000,0x00000000,
16:06:28.609 -> TOS Check OK! 0x68400000, 745103
16:06:28.609 -> Enter Trust OS
16:06:28.609 -> INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日星期五 03:32:22 UTC arm)
16:06:28.657 ->
16:06:28.657 ->
INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0
16:06:28.657 ->
16:06:28.657 ->
INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000
16:06:28.657 ->
16:06:28.657 ->
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
16:06:28.657 ->

16:06:28.799 ->
16:06:28.799 -> U-Boot 2020.10-armbian+ (Mar 12 2021 - 13:38:05 +0000)
16:06:28.799 ->
16:06:28.799 -> Model: Generic Rockchip rk322x TV Box board
16:06:28.799 -> DRAM: 1010 MiB
16:06:28.988 -> MMC:   dwmmc@30000000: 1, dwmmc@30020000: 0
16:06:28.988 -> Loading Environment from EXT4... Card did not respond to voltage select!
16:06:29.034 -> In:    serial@11030000
16:06:29.034 -> Out:   serial@11030000
16:06:29.034 -> Err:   serial@11030000
16:06:29.034 -> Model: Generic Rockchip rk322x TV Box board
16:06:29.034 -> Net:   eth0: ethernet@30200000
16:06:29.223 -> starting USB...
16:06:29.223 -> Bus usb@30040000: USB DWC2
16:06:30.485 -> Bus usb@30080000: USB EHCI 1.00
16:06:30.485 -> Bus usb@300c0000: USB EHCI 1.00
16:06:30.533 -> Bus usb@30100000: USB EHCI 1.00
16:06:30.533 -> scanning bus usb@30040000 for devices... 1 USB Device(s) found
16:06:31.705 -> scanning bus usb@30080000 for devices... 1 USB Device(s) found
16:06:32.824 -> scanning bus usb@300c0000 for devices... 1 USB Device(s) found

16:06:33.958 -> scanning bus usb@30100000 for devices... 1 USB Device(s) found
16:06:34.099 ->        scanning usb for storage devices... 0 Storage Device(s) found
16:06:34.147 -> Hit any key to stop autoboot: 0
16:06:34.147 -> switch to partitions #0, OK
16:06:34.147 -> mmc1 is current device
16:06:34.147 -> Scanning mmc 1:1...
16:06:34.195 -> Found /extlinux/extlinux.conf
16:06:34.195 -> Retrieving file: /extlinux/extlinux.conf
16:06:34.195 -> 175 bytes read in 8 ms (20.5 KiB/s)
16:06:34.195 -> 1:      Multitool
16:06:34.195 -> Retrieving file: /kernel.img
16:06:34.573 -> 8719272 bytes read in 384 ms (21.7 MiB/s)
16:06:34.573 -> append: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0
16:06:34.620 -> Retrieving file: /rk322x-box.dtb
16:06:34.620 -> 46636 bytes read in 8 ms (5.6 MiB/s)
16:06:34.620 -> ## Flattened Device Tree blob at 61f00000
16:06:34.620 ->    Booting using the fdt blob at 0x61f00000
16:06:34.668 -> EHCI failed to shut down host controller.
16:06:34.714 -> EHCI failed to shut down host controller.
16:06:34.714 ->    Loading Device Tree to 683f1000, end 683ff62b ... OK
16:06:34.761 ->
16:06:34.761 -> Starting kernel ...
16:06:34.761 ->
16:06:37.122 -> [    0.000000] Booting Linux on physical CPU 0xf00
16:06:37.122 -> [    0.000000] Initializing cgroup subsys cpuset
16:06:37.122 -> [    0.000000] Initializing cgroup subsys cpu
16:06:37.122 -> [    0.000000] Initializing cgroup subsys cpuacct
16:06:37.122 -> [    0.000000] Linux version 4.4.194-rk322x (root@armbianbuild) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #47 SMP Thu Apr 9 17:37:46 UTC 2020
16:06:37.169 -> [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
16:06:37.169 -> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
16:06:37.169 -> [    0.000000] Machine model: Generic RK322x TV Box board
16:06:37.169 -> [    0.000000] cma: Reserved 128 MiB at 0x98000000
16:06:37.169 -> [    0.000000] Memory policy: Data cache writealloc
16:06:37.169 -> [    0.000000] psci: probing for conduit method from DT.
16:06:37.215 -> [    0.000000] psci: PSCIv65535.65535 detected in firmware.
16:06:37.215 -> [    0.000000] psci: Using standard PSCI v0.2 function IDs
16:06:37.215 -> [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
16:06:37.215 -> [    0.000000] PERCPU: Embedded 14 pages/cpu @e7659000 s24856 r8192 d24296 u57344
16:06:37.215 -> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256256
16:06:37.215 -> [    0.000000] Kernel command line: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0
16:06:37.215 -> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
16:06:37.260 -> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
16:06:37.260 -> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
16:06:37.260 -> [    0.000000] Memory: 871700K/1034240K available (12820K kernel code, 875K rwdata, 3224K rodata, 796K init, 1219K bss, 31468K reserved, 131072K cma-reserved, 0K highmem)
16:06:37.260 -> [    0.000000] Virtual kernel memory layout:
16:06:37.260 -> [    0.000000]     vector : 0xffff0000 - 0xffff1000   (   4 kB)
16:06:37.260 -> [    0.000000]     fixmap : 0xffc00000 - 0xfff00000   (3072 kB)
16:06:37.307 -> [    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
16:06:37.307 -> [    0.000000]     lowmem : 0xb0000000 - 0xf0000000   (1024 MB)
16:06:37.307 -> [    0.000000]     pkmap   : 0xafe00000 - 0xb0000000   (   2 MB)
16:06:37.307 -> [    0.000000]     modules : 0xaf000000 - 0xafe00000   ( 14 MB)
16:06:37.307 -> [    0.000000]       .text : 0xb0008000 - 0xb0c8d53c   (12822 kB)
16:06:37.307 -> [    0.000000]       .init : 0xb10a1000 - 0xb1168000   ( 796 kB)
16:06:37.307 -> [    0.000000]       .data : 0xb1168000 - 0xb1242e94   ( 876 kB)
16:06:37.307 -> [    0.000000]        .bss : 0xb1244000 - 0xb1374ee4   (1220 kB)
16:06:37.355 -> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
16:06:37.355 -> [    0.000000] Hierarchical RCU implementation.
16:06:37.355 -> [    0.000000] Build-time adjustment of leaf fanout to 32.
16:06:37.355 -> [    0.000000] NR_IRQS:16 nr_irqs:16 16
16:06:37.355 -> [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
16:06:37.355 -> [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
16:06:37.355 -> [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
16:06:37.403 -> [    0.000022] Switching to timer-based delay loop, resolution 41ns
16:06:37.403 -> [    0.001661] Console: colour dummy device 80x30
16:06:37.403 -> [    0.001693] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)

16:06:37.403 -> [    0.001712] pid_max: default: 32768 minimum: 301
16:06:37.403 -> [    0.001841] Security Framework initialized
16:06:37.403 -> [    0.001855] Yama: becoming mindful.
16:06:37.403 -> [    0.001932] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
16:06:37.403 -> [    0.001948] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
16:06:37.403 -> [    0.002832] Initializing cgroup subsys io
16:06:37.451 -> [    0.002865] Initializing cgroup subsys memory
16:06:37.451 -> [    0.002907] Initializing cgroup subsys devices
16:06:37.451 -> [    0.002926] Initializing cgroup subsys freezer
16:06:37.451 -> [    0.002944] Initializing cgroup subsys net_cls
16:06:37.451 -> [    0.002961] Initializing cgroup subsys perf_event
16:06:37.451 -> [    0.002978] Initializing cgroup subsys net_prio
16:06:37.451 -> [    0.003007] Initializing cgroup subsys pids
16:06:37.451 -> [    0.003074] CPU: Testing write buffer coherency: ok
16:06:37.451 -> [    0.003121] ftrace: allocating 41720 entries in 123 pages
16:06:37.451 -> [    0.082101] /cpus/cpu@f00 missing clock-frequency property
16:06:37.498 -> [    0.082132] /cpus/cpu@f01 missing clock-frequency property
16:06:37.498 -> [    0.082150] /cpus/cpu@f02 missing clock-frequency property
16:06:37.498 -> [    0.082170] /cpus/cpu@f03 missing clock-frequency property
16:06:37.498 -> [    0.082181] CPU0: update cpu_capacity 430
16:06:37.498 -> [    0.082193] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
16:06:37.498 -> [    0.082272] Setting up static identity map for 0x60008280 - 0x600082d8
16:06:37.498 -> [    0.085059] CPU1: update cpu_capacity 430
16:06:37.498 -> [    0.085067] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
16:06:37.498 -> [    0.086155] CPU2: update cpu_capacity 430
16:06:37.546 -> [    0.086164] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
16:06:37.546 -> [    0.087184] CPU3: update cpu_capacity 430
16:06:37.546 -> [    0.087192] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
16:06:37.546 -> [    0.087321] Brought up 4 CPUs
16:06:37.546 -> [    0.087359] SMP: Total of 4 processors activated (192.00 BogoMIPS).
16:06:37.546 -> [    0.087368] CPU: All CPU(s) started in SVC mode.
16:06:37.546 -> [    0.088840] devtmpfs: initialized
16:06:37.546 -> [    0.106172] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
16:06:37.546 -> [    0.106692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
16:06:37.593 -> [    0.106727] futex hash table entries: 1024 (order: 4, 65536 bytes)
16:06:37.593 -> [    0.112695] xor: measuring software checksum speed
16:06:37.593 -> [    0.150075]    arm4regs : 1011.000 MB/sec
16:06:37.593 -> [    0.190179]    8regs     :   705.000 MB/sec
16:06:37.593 -> [    0.230285]    32regs    :   684.000 MB/sec
16:06:37.593 -> [    0.270388]    neon      : 1018.000 MB/sec
16:06:37.593 -> [    0.270399] xor: using function: neon (1018.000 MB/sec)
16:06:37.593 -> [    0.270436] pinctrl core: initialized pinctrl subsystem
16:06:37.593 -> [    0.271974] NET: Registered protocol family 16
16:06:37.593 -> [    0.274111] DMA: preallocated 2048 KiB pool for atomic coherent allocations
16:06:37.640 -> [    0.286544] cpuidle: using governor ladder
16:06:37.640 -> [    0.298559] cpuidle: using governor menu
16:06:37.640 -> [    0.320732] console [pstore-1] enabled
16:06:37.640 -> [    0.320744] pstore: Registered ramoops as persistent store backend
16:06:37.640 -> [    0.320756] ramoops: attached 0xf0000@0x62e00000, ecc: 0/0
16:06:37.640 -> [    0.323628] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
16:06:37.640 -> [    0.323649] hw-breakpoint: maximum watchpoint size is 8 bytes.
16:06:37.640 -> [    0.419398] raid6: int32x1 gen()   133 MB/s
16:06:37.688 -> [    0.487522] raid6: int32x1 xor()   131 MB/s
16:06:37.688 -> [    0.555722] raid6: int32x2 gen()   166 MB/s
16:06:37.688 -> [    0.623779] raid6: int32x2 xor()   136 MB/s
16:06:37.688 -> [    0.692138] raid6: int32x4 gen()   163 MB/s
16:06:37.688 -> [    0.760374] raid6: int32x4 xor()   137 MB/s
16:06:37.688 -> [    0.828531] raid6: int32x8 gen()   166 MB/s
16:06:37.688 -> [    0.896788] raid6: int32x8 xor()   113 MB/s
16:06:37.688 -> [    0.964932] raid6: neonx1   gen()   382 MB/s
16:06:37.688 -> [    1.033062] raid6: neonx1   xor()   290 MB/s
16:06:37.688 -> [    1.101271] raid6: neonx2   gen()   519 MB/s
16:06:37.688 -> [    1.169427] raid6: neonx2   xor()   376 MB/s

16:06:37.688 -> [    1.237629] raid6: neonx4   gen()   581 MB/s
16:06:37.736 -> [    1.305853] raid6: neonx4   xor()   400 MB/s
16:06:37.736 -> [    1.374131] raid6: neonx8   gen()   560 MB/s
16:06:37.736 -> [    1.442310] raid6: neonx8   xor()   391 MB/s
16:06:37.736 -> [    1.442324] raid6: using algorithm neonx4 gen() 581 MB/s
16:06:37.736 -> [    1.442333] raid6: .... xor() 400 MB/s, rmw enabled
16:06:37.736 -> [    1.442344] raid6: using intx1 recovery algorithm
16:06:37.736 -> [    1.443285] rockchip-pm rockchip-suspend: not set wakeup-config
16:06:37.736 -> [    1.443307] rockchip-pm rockchip-suspend: not set pwm-regulator-config
16:06:37.736 -> [    1.446698] iommu: Adding device 20020000.vpu-service to group 0
16:06:37.783 -> [    1.446802] iommu: Adding device 20030000.rkvdec to group 1
16:06:37.783 -> [    1.446894] iommu: Adding device 20050000.vop to group 2
16:06:37.783 -> [    1.446984] iommu: Adding device 20070000.iep to group 3
16:06:37.783 -> [    1.447521] rk_iommu 20020800.iommu: can't get sclk
16:06:37.783 -> [    1.448089] rk_iommu 20030480.iommu: can't get sclk
16:06:37.783 -> [    1.448326] rk_iommu 20053f00.iommu: can't get sclk
16:06:37.783 -> [    1.448469] rk_iommu 20070800.iommu: can't get aclk
16:06:37.783 -> [    1.448488] rk_iommu 20070800.iommu: can't get hclk
16:06:37.783 -> [    1.448504] rk_iommu 20070800.iommu: can't get sclk
16:06:37.783 -> [    1.449253] SCSI subsystem initialized
16:06:37.831 -> [    1.449646] usbcore: registered new interface driver usbfs
16:06:37.831 -> [    1.449744] usbcore: registered new interface driver hub
16:06:37.831 -> [    1.449865] usbcore: registered new device driver usb
16:06:37.831 -> [    1.450080] media: Linux media interface: v0.10
16:06:37.831 -> [    1.450158] Linux video capture interface: v2.00
16:06:37.831 -> [    1.450421] pps_core: LinuxPPS API ver. 1 registered
16:06:37.831 -> [    1.450438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
16:06:37.831 -> [    1.450478] PTP clock support registered
16:06:37.878 -> [    1.452357] Advanced Linux Sound Architecture Driver Initialized.
16:06:37.878 -> [    1.453422] Bluetooth: Core ver 2.21
16:06:37.878 -> [    1.453489] NET: Registered protocol family 31
16:06:37.878 -> [    1.453503] Bluetooth: HCI device and connection manager initialized
16:06:37.878 -> [    1.453524] Bluetooth: HCI socket layer initialized
16:06:37.878 -> [    1.453541] Bluetooth: L2CAP socket layer initialized
16:06:37.878 -> [    1.453596] Bluetooth: SCO socket layer initialized
16:06:37.878 -> [    1.454403] NetLabel: Initializing
16:06:37.878 -> [    1.454425] NetLabel: domain hash size = 128
16:06:37.878 -> [    1.454434] NetLabel: protocols = UNLABELED CIPSOv4
16:06:37.926 -> [    1.454509] NetLabel: unlabeled traffic allowed by default
16:06:37.926 -> [    1.455514] clocksource: Switched to clocksource arch_sys_counter
16:06:37.926 -> [    1.550300] NET: Registered protocol family 2
16:06:37.926 -> [    1.551141] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
16:06:37.926 -> [    1.551255] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
16:06:37.926 -> [    1.551689] TCP: Hash tables configured (established 8192 bind 8192)
16:06:37.926 -> [    1.551796] UDP hash table entries: 512 (order: 2, 24576 bytes)
16:06:37.926 -> [    1.551866] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
16:06:37.926 -> [    1.552214] NET: Registered protocol family 1
16:06:37.974 -> [    1.552868] RPC: Registered named UNIX socket transport module.
16:06:37.974 -> [    1.552891] RPC: Registered udp transport module.
16:06:37.974 -> [    1.552902] RPC: Registered tcp transport module.
16:06:37.974 -> [    1.552912] RPC: Registered tcp NFSv4.1 backchannel transport module.
16:06:37.974 -> [    1.553763] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
16:06:37.974 -> [    1.556699] Initialise system trusted keyring
16:06:37.974 -> [    1.570808] VFS: Disk quotas dquot_6.6.0
16:06:37.974 -> [    1.571121] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
16:06:38.021 -> [    1.573919] squashfs: version 4.0 (2009/01/31) Phillip Lougher
16:06:38.021 -> [    1.577452] NFS: Registering the id_resolver key type
16:06:38.021 -> [    1.577523] Key type id_resolver registered
16:06:38.021 -> [    1.577535] Key type id_legacy registered
16:06:38.021 -> [    1.577567] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
16:06:38.021 -> [    1.577658] ntfs: driver 2.1.32 [Flags: R/W].
16:06:38.021 -> [    1.578577] JFS: nTxBlock = 7834, nTxLock = 62673
16:06:38.021 -> [    1.587480] SGI XFS with security attributes, no debug enabled
16:06:38.021 -> [    1.596263] NET: Registered protocol family 38
16:06:38.069 -> [    1.596319] Key type asymmetric registered

16:06:38.069 -> [    1.596340] Asymmetric key parser 'x509' registered
16:06:38.069 -> [    1.596727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
16:06:38.069 -> [    1.596984] io scheduler noop registered
16:06:38.069 -> [    1.597016] io scheduler deadline registered
16:06:38.069 -> [    1.597094] io scheduler cfq registered (default)
16:06:38.069 -> [    1.600190] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator
16:06:38.069 -> [    1.605091] rk-vcodec 20020000.vpu-service: no regulator for vcodec
16:06:38.069 -> [    1.605525] rk-vcodec 20020000.vpu-service: probe device
16:06:38.069 -> [    1.605947] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled
16:06:38.114 -> [    1.607113] rk-vcodec 20020000.vpu-service: could not find power_model node
16:06:38.114 -> [    1.607138] rk-vcodec 20020000.vpu-service: init success
16:06:38.114 -> [    1.607452] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry
16:06:38.114 -> [    1.611726] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330
16:06:38.114 -> [    1.611753] dma-pl330 110f0000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
16:06:38.114 -> [    1.612813] rockchip-system-monitor rockchip-system-monitor: system monitor probe
16:06:38.160 -> [    1.615050] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
16:06:38.160 -> [    1.615912] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 30, base_baud = 1500000) is a 16550A
16:06:38.160 -> [    2.647681] console [ttyS2] enabled
16:06:38.160 -> [    2.652951] [drm] Initialized drm 1.1.0 20060810
16:06:38.160 -> [    2.660064] [drm] Rockchip DRM driver version: v1.0.1
16:06:38.160 -> [    2.665392] rockchip-drm display-subsystem: devfreq is not set
16:06:38.160 -> [    2.672028] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xb0d111b0)
16:06:38.205 -> [    2.679791] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports
16:06:38.205 -> [    2.686455] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver
16:06:38.205 -> [    2.694310] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy)
16:06:38.205 -> [    2.705252] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xb0d09708)
16:06:38.205 -> [    2.712728] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
16:06:38.252 -> [    2.719365] [drm] No driver support for vblank timestamp query.
16:06:38.252 -> [    2.725418] rockchip-drm display-subsystem: failed to parse display resources
16:06:38.962 -> [    3.354904] rockchip-vop 20050000.vop: [drm:vop_crtc_enable] Update mode to 1440x900p60, type: 11
16:06:38.962 -> [    3.355743] dwhdmi-rockchip 200a0000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
16:06:38.962 -> [    3.355751] dwhdmi-rockchip 200a0000.hdmi:     colorspace: RGB
16:06:38.962 -> [    3.355759] dwhdmi-rockchip 200a0000.hdmi:     scan mode: Underscan
16:06:39.010 -> [    3.355765] dwhdmi-rockchip 200a0000.hdmi:     colorimetry: No Data
16:06:39.010 -> [    3.355771] dwhdmi-rockchip 200a0000.hdmi:     picture aspect: No Data
16:06:39.010 -> [    3.355778] dwhdmi-rockchip 200a0000.hdmi:     active aspect: Same as Picture
16:06:39.010 -> [    3.355784] dwhdmi-rockchip 200a0000.hdmi:     itc: IT Content
16:06:39.010 -> [    3.355791] dwhdmi-rockchip 200a0000.hdmi:     extended colorimetry: xvYCC 601
16:06:39.010 -> [    3.355797] dwhdmi-rockchip 200a0000.hdmi:     quantization range: Full
16:06:39.010 -> [    3.355804] dwhdmi-rockchip 200a0000.hdmi:     nups: Unknown Non-uniform Scaling
16:06:39.058 -> [    3.355810] dwhdmi-rockchip 200a0000.hdmi:     video code: 0
16:06:39.058 -> [    3.355817] dwhdmi-rockchip 200a0000.hdmi:     ycc quantization range: Full
16:06:39.058 -> [    3.355823] dwhdmi-rockchip 200a0000.hdmi:     hdmi content type: Graphics
16:06:39.058 -> [    3.355829] dwhdmi-rockchip 200a0000.hdmi:     pixel repeat: 0
16:06:39.058 -> [    3.355837] dwhdmi-rockchip 200a0000.hdmi:     bar top 0, bottom 0, left 0, right 0
16:06:39.058 -> [    3.414549] Console: switching to colour frame buffer device 180x56
16:06:39.058 -> [    3.565769] rockchip-drm display-subsystem: fb0: frame buffer device
16:06:39.105 -> [    3.590258] brd: module loaded
16:06:39.105 -> [    3.604588] loop: module loaded
16:06:39.105 -> [    3.607874] lkdtm: No crash points registered, enable through debugfs
16:06:39.105 -> [    3.617016] libphy: Fixed MDIO Bus: probed
16:06:39.152 -> [    3.621192] tun: Universal TUN/TAP device driver, 1.6
16:06:39.152 -> [    3.626307] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
16:06:39.152 -> [    3.632881] CAN device driver interface
16:06:39.152 -> [    3.638176] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output).
16:06:39.152 -> [    3.645386] rk_gmac-dwmac 30200000.ethernet: TX delay(0x30).
16:06:39.152 -> [    3.651071] rk_gmac-dwmac 30200000.ethernet: RX delay(0x10).
16:06:39.152 -> [    3.656794] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes).
16:06:39.152 -> [    3.663244] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed
16:06:39.200 -> [    3.675292] rk_gmac-dwmac 30200000.ethernet: init for RMII
16:06:39.248 -> [    3.715637] stmmac - user ID: 0x10, Synopsys ID: 0x35
16:06:39.248 -> [    3.720724] Ring mode enabled
16:06:39.248 -> [    3.723817] DMA HW capability register supported
16:06:39.248 -> [    3.728365] Normal descriptors
16:06:39.248 -> [    3.731713] RX Checksum Offload Engine supported (type 2)
16:06:39.248 -> [    3.737212] TX Checksum insertion supported
16:06:39.248 -> [    3.741507] Wake-Up On Lan supported
16:06:39.248 -> [    3.745298] rk_gmac-dwmac 30200000.ethernet: rk_get_eth_addr: mac address: fa:03:39:88:c3:e7
16:06:39.248 -> [    3.753759] eth%d: device MAC address fa:03:39:88:c3:e7
16:06:39.248 -> [    3.759037] Enable RX Mitigation via HW Watchdog Timer
16:06:39.296 -> [    3.781196] libphy: stmmac: probed

16:06:39.296 -> [    3.784685] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active
16:06:39.296 -> [    3.791318] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
16:06:39.296 -> [    3.797184] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
16:06:39.296 -> [    3.803040] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
16:06:39.344 -> [    3.808908] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
16:06:39.344 -> [    3.814760] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
16:06:39.344 -> [    3.820611] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
16:06:39.344 -> [    3.826474] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
16:06:39.344 -> [    3.832326] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
16:06:39.344 -> [    3.838179] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
16:06:39.344 -> [    3.844043] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
16:06:39.344 -> [    3.850000] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
16:06:39.344 -> [    3.855945] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
16:06:39.391 -> [    3.861890] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
16:06:39.391 -> [    3.867835] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
16:06:39.391 -> [    3.873789] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
16:06:39.391 -> [    3.879731] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
16:06:39.391 -> [    3.885671] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
16:06:39.391 -> [    3.891624] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
16:06:39.391 -> [    3.897566] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
16:06:39.436 -> [    3.903519] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
16:06:39.436 -> [    3.909470] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
16:06:39.436 -> [    3.915414] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
16:06:39.436 -> [    3.921355] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
16:06:39.436 -> [    3.927304] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
16:06:39.436 -> [    3.933247] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
16:06:39.436 -> [    3.939187] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
16:06:39.436 -> [    3.945138] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
16:06:39.481 -> [    3.951079] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
16:06:39.481 -> [    3.957037] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
16:06:39.481 -> [    3.962979] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
16:06:39.481 -> [    3.968920] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
16:06:39.481 -> [    3.976464] PPP generic driver version 2.4.2
16:06:39.481 -> [    3.981280] Atmel at76x USB Wireless LAN Driver 0.17 loading
16:06:39.481 -> [    3.987154] usbcore: registered new interface driver at76c50x-usb
16:06:39.526 -> [    3.993471] usbcore: registered new interface driver rtl8187
16:06:39.526 -> [    3.999337] usbcore: registered new interface driver rndis_wlan
16:06:39.526 -> [    4.005406] usbcore: registered new interface driver zd1201
16:06:39.526 -> [    4.011412] usbcore: registered new interface driver rt2800usb
16:06:39.526 -> [    4.017464] Rockchip WiFi SYS interface (V1.00) ...
16:06:39.526 -> [    4.022538] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
16:06:39.526 -> [    4.030050] usbcore: registered new interface driver pegasus
16:06:39.526 -> [    4.035840] usbcore: registered new interface driver rtl8150
16:06:39.570 -> [    4.041607] usbcore: registered new interface driver r8152
16:06:39.570 -> [    4.047218] usbcore: registered new interface driver asix
16:06:39.570 -> [    4.052738] usbcore: registered new interface driver ax88179_178a
16:06:39.570 -> [    4.058932] usbcore: registered new interface driver cdc_ether
16:06:39.570 -> [    4.064868] usbcore: registered new interface driver dm9601
16:06:39.570 -> [    4.070567] usbcore: registered new interface driver smsc75xx
16:06:39.570 -> [    4.076434] usbcore: registered new interface driver smsc95xx
16:06:39.570 -> [    4.082276] usbcore: registered new interface driver net1080
16:06:39.616 -> [    4.088079] usbcore: registered new interface driver rndis_host
16:06:39.616 -> [    4.094123] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
16:06:39.616 -> [    4.101687] usbcore: registered new interface driver cdc_ncm
16:06:39.616 -> [    4.107454] usbcore: registered new interface driver cdc_mbim
16:06:39.616 -> [    4.113736] 30040000.usb supply vusb_d not found, using dummy regulator
16:06:39.616 -> [    4.120490] 30040000.usb supply vusb_a not found, using dummy regulator
16:06:39.661 -> [    4.140303] dwc2 30040000.usb: DWC OTG Controller
16:06:39.661 -> [    4.145125] dwc2 30040000.usb: new USB bus registered, assigned bus number 1
16:06:39.661 -> [    4.152253] dwc2 30040000.usb: irq 49, io mem 0x30040000
16:06:39.661 -> [    4.157901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
16:06:39.661 -> [    4.164729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
16:06:39.661 -> [    4.171973] usb usb1: Product: DWC OTG Controller
16:06:39.706 -> [    4.176700] usb usb1: Manufacturer: Linux 4.4.194-rk322x dwc2_hsotg
16:06:39.706 -> [    4.182984] usb usb1: SerialNumber: 30040000.usb

16:06:39.706 -> [    4.188651] hub 1-0:1.0: USB hub found
16:06:39.706 -> [    4.192567] hub 1-0:1.0: 1 port detected
16:06:39.706 -> [    4.198099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
16:06:39.706 -> [    4.204760] ehci-platform: EHCI generic platform driver
16:06:39.706 -> [    4.212584] ehci-platform 30080000.usb: EHCI Host Controller
16:06:39.752 -> [    4.218686] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2
16:06:39.752 -> [    4.226839] ehci-platform 30080000.usb: irq 50, io mem 0x30080000
16:06:39.752 -> [    4.243570] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00
16:06:39.752 -> [    4.250073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
16:06:39.752 -> [    4.256907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
16:06:39.799 -> [    4.264153] usb usb2: Product: EHCI Host Controller
16:06:39.799 -> [    4.269052] usb usb2: Manufacturer: Linux 4.4.194-rk322x ehci_hcd
16:06:39.799 -> [    4.275160] usb usb2: SerialNumber: 30080000.usb
16:06:39.799 -> [    4.280712] hub 2-0:1.0: USB hub found
16:06:39.799 -> [    4.284616] hub 2-0:1.0: 1 port detected
16:06:39.799 -> [    4.291614] ehci-platform 300c0000.usb: EHCI Host Controller
16:06:39.799 -> [    4.297899] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3
16:06:39.799 -> [    4.306058] ehci-platform 300c0000.usb: irq 52, io mem 0x300c0000
16:06:39.846 -> [    4.323578] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00
16:06:39.846 -> [    4.330078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
16:06:39.846 -> [    4.336910] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
16:06:39.846 -> [    4.344156] usb usb3: Product: EHCI Host Controller
16:06:39.846 -> [    4.349055] usb usb3: Manufacturer: Linux 4.4.194-rk322x ehci_hcd
16:06:39.846 -> [    4.355166] usb usb3: SerialNumber: 300c0000.usb
16:06:39.846 -> [    4.360760] hub 3-0:1.0: USB hub found
16:06:39.893 -> [    4.364665] hub 3-0:1.0: 1 port detected
16:06:39.893 -> [    4.371633] ehci-platform 30100000.usb: EHCI Host Controller
16:06:39.893 -> [    4.377704] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4
16:06:39.893 -> [    4.385882] ehci-platform 30100000.usb: irq 54, io mem 0x30100000
16:06:39.893 -> [    4.403576] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00
16:06:39.940 -> [    4.410065] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
16:06:39.940 -> [    4.416896] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
16:06:39.940 -> [    4.424141] usb usb4: Product: EHCI Host Controller
16:06:39.940 -> [    4.429043] usb usb4: Manufacturer: Linux 4.4.194-rk322x ehci_hcd
16:06:39.940 -> [    4.435154] usb usb4: SerialNumber: 30100000.usb
16:06:39.940 -> [    4.440752] hub 4-0:1.0: USB hub found
16:06:39.940 -> [    4.444653] hub 4-0:1.0: 1 port detected
16:06:39.940 -> [    4.449430] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
16:06:39.986 -> [    4.455749] ohci-platform: OHCI generic platform driver
16:06:39.986 -> [    4.461434] ohci-platform 300a0000.usb: Generic Platform OHCI controller
16:06:39.986 -> [    4.469586] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5
16:06:39.986 -> [    4.477751] ohci-platform 300a0000.usb: irq 51, io mem 0x300a0000
16:06:40.034 -> [    4.543880] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
16:06:40.081 -> [    4.550733] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
16:06:40.081 -> [    4.557983] usb usb5: Product: Generic Platform OHCI controller
16:06:40.081 -> [    4.563934] usb usb5: Manufacturer: Linux 4.4.194-rk322x ohci_hcd
16:06:40.081 -> [    4.570050] usb usb5: SerialNumber: 300a0000.usb
16:06:40.081 -> [    4.575890] hub 5-0:1.0: USB hub found
16:06:40.081 -> [    4.579792] hub 5-0:1.0: 1 port detected
16:06:40.081 -> [    4.584625] ohci-platform 300e0000.usb: Generic Platform OHCI controller
16:06:40.081 -> [    4.591755] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6
16:06:40.127 -> [    4.599889] ohci-platform 300e0000.usb: irq 53, io mem 0x300e0000
16:06:40.173 -> [    4.663844] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
16:06:40.173 -> [    4.670682] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
16:06:40.173 -> [    4.677943] usb usb6: Product: Generic Platform OHCI controller
16:06:40.173 -> [    4.683891] usb usb6: Manufacturer: Linux 4.4.194-rk322x ohci_hcd
16:06:40.220 -> [    4.690008] usb usb6: SerialNumber: 300e0000.usb
16:06:40.220 -> [    4.696079] hub 6-0:1.0: USB hub found
16:06:40.220 -> [    4.699985] hub 6-0:1.0: 1 port detected
16:06:40.220 -> [    4.704817] ohci-platform 30120000.usb: Generic Platform OHCI controller
16:06:40.220 -> [    4.711937] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7
16:06:40.220 -> [    4.720044] ohci-platform 30120000.usb: irq 55, io mem 0x30120000
16:06:40.314 -> [    4.783817] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
16:06:40.314 -> [    4.790650] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

16:06:40.314 -> [    4.797895] usb usb7: Product: Generic Platform OHCI controller
16:06:40.314 -> [    4.803852] usb usb7: Manufacturer: Linux 4.4.194-rk322x ohci_hcd
16:06:40.314 -> [    4.809966] usb usb7: SerialNumber: 30120000.usb
16:06:40.314 -> [    4.815937] hub 7-0:1.0: USB hub found
16:06:40.314 -> [    4.819849] hub 7-0:1.0: 1 port detected
16:06:40.314 -> [    4.824764] usbcore: registered new interface driver cdc_acm
16:06:40.362 -> [    4.830473] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
16:06:40.362 -> [    4.838674] usbcore: registered new interface driver cdc_wdm
16:06:40.362 -> [    4.844653] usbcore: registered new interface driver usb-storage
16:06:40.362 -> [    4.850871] usbcore: registered new interface driver usbserial
16:06:40.362 -> [    4.856820] usbcore: registered new interface driver usbserial_generic
16:06:40.362 -> [    4.863430] usbserial: USB Serial support registered for generic
16:06:40.362 -> [    4.869557] usbcore: registered new interface driver keyspan
16:06:40.362 -> [    4.875301] usbserial: USB Serial support registered for Keyspan - (without firmware)
16:06:40.410 -> [    4.883202] usbserial: USB Serial support registered for Keyspan 1 port adapter
16:06:40.410 -> [    4.890577] usbserial: USB Serial support registered for Keyspan 2 port adapter
16:06:40.410 -> [    4.897950] usbserial: USB Serial support registered for Keyspan 4 port adapter
16:06:40.410 -> [    4.905377] usbcore: registered new interface driver option
16:06:40.410 -> [    4.911017] usbserial: USB Serial support registered for GSM modem (1-port)
16:06:40.410 -> [    4.918683] usbcore: registered new interface driver oti6858
16:06:40.456 -> [    4.924608] usbserial: USB Serial support registered for oti6858
16:06:40.456 -> [    4.930759] usbcore: registered new interface driver qcserial
16:06:40.456 -> [    4.936587] usbserial: USB Serial support registered for Qualcomm USB modem
16:06:40.456 -> [    4.943734] usbcore: registered new interface driver sierra
16:06:40.456 -> [    4.949381] usbserial: USB Serial support registered for Sierra USB modem
16:06:40.456 -> [    4.957145] usbcore: registered new interface driver iforce
16:06:40.456 -> [    4.962922] usbcore: registered new interface driver xpad
16:06:40.456 -> [    4.968601] usbcore: registered new interface driver usbtouchscreen
16:06:40.503 -> [    4.976072] i2c /dev entries driver
16:06:40.503 -> [    4.982387] usbcore: registered new interface driver uvcvideo
16:06:40.503 -> [    4.988196] USB Video Class driver (1.1.1)
16:06:40.503 -> [    4.994170] Boot mode: normal
16:06:40.503 -> [    4.998418] rockchip-thermal 11150000.tsadc: tsadc is probed successfully!
16:06:40.503 -> [    5.006973] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
16:06:40.503 -> [    5.016012] Bluetooth: Virtual HCI driver ver 1.5
16:06:40.550 -> [    5.021138] Bluetooth: HCI UART driver ver 2.3
16:06:40.550 -> [    5.025661] Bluetooth: HCI UART protocol H4 registered
16:06:40.550 -> [    5.030835] Bluetooth: HCI UART protocol LL registered
16:06:40.550 -> [    5.035999] Bluetooth: HCI UART protocol ATH3K registered
16:06:40.550 -> [    5.041426] Bluetooth: HCI UART protocol Three-wire (H5) registered
16:06:40.550 -> [    5.048008] Bluetooth: HCI UART protocol BCM registered
16:06:40.550 -> [    5.053436] usbcore: registered new interface driver bfusb
16:06:40.550 -> [    5.059113] usbcore: registered new interface driver btusb
16:06:40.597 -> [    5.064639] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
16:06:40.597 -> [    5.070941] cpu cpu0: leakage=3
16:06:40.597 -> [    5.074164] cpu cpu0: leakage-volt-sel=0
16:06:40.597 -> [    5.078336] cpu cpu0: Failed to get pvtm
16:06:40.597 -> [    5.083805] cpu cpu0: avs=0
16:06:40.597 -> [    5.086672] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0
16:06:40.597 -> [    5.093680] cpu cpu0: failed to read out thermal zone (-22)
16:06:40.597 -> [    5.099946] cpu cpu0: failed to find power_model node
16:06:40.597 -> [    5.105720] Synopsys Designware Multimedia Card Interface Driver
16:06:40.645 -> [    5.112440] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode.
16:06:40.645 -> [    5.119825] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller.
16:06:40.645 -> [    5.126643] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a
16:06:40.645 -> [    5.132534] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo
16:06:40.645 -> [    5.142434] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found
16:06:40.645 -> [    5.148666] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found
16:06:40.645 -> [    5.155073] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO
16:06:40.692 -> [    5.173170] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
16:06:40.692 -> [    5.195327] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized
16:06:40.692 -> [    5.201693] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available
16:06:40.740 -> [    5.211136] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode.
16:06:40.740 -> [    5.218770] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller.

16:06:40.740 -> [    5.225638] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a
16:06:40.740 -> [    5.227527] usb 7-1: new low-speed USB device number 2 using ohci-platform
16:06:40.740 -> [    5.238498] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo
16:06:40.740 -> [    5.248380] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found
16:06:40.786 -> [    5.254617] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found
16:06:40.786 -> [    5.273894] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 400000Hz, actual 244140HZ div = 2)
16:06:40.786 -> [    5.295833] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized
16:06:40.834 -> [    5.302049] dwmmc_rockchip 30020000.dwmmc: IDMAC supports 32-bit address mode.
16:06:40.834 -> [    5.309524] dwmmc_rockchip 30020000.dwmmc: Using internal DMA controller.
16:06:40.834 -> [    5.316420] dwmmc_rockchip 30020000.dwmmc: Version ID is 270a
16:06:40.834 -> [    5.322334] dwmmc_rockchip 30020000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo
16:06:40.834 -> [    5.332214] dwmmc_rockchip 30020000.dwmmc: 'clock-freq-min-max' property was deprecated.
16:06:40.834 -> [    5.340461] dwmmc_rockchip 30020000.dwmmc: No vmmc regulator found
16:06:40.834 -> [    5.346704] dwmmc_rockchip 30020000.dwmmc: No vqmmc regulator found
16:06:40.882 -> [    5.363737] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
16:06:40.882 -> [    5.373612] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
16:06:40.882 -> [    5.373649] mmc0: new high speed SDXC card at address aaaa
16:06:40.882 -> [    5.374518] mmcblk0: mmc0:aaaa SC64G 59.5 GiB
16:06:40.882 -> [    5.378617] mmcblk0: p1 p2
16:06:40.930 -> [    5.387451] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 300000Hz, actual 244140HZ div = 2)
16:06:40.930 -> [    5.417589] dwmmc_rockchip 30020000.dwmmc: 1 slots initialized
16:06:40.930 -> [    5.424639] ledtrig-cpu: registered to indicate activity on CPUs
16:06:40.930 -> [    5.430877] hidraw: raw HID events driver (C) Jiri Kosina
16:06:40.930 -> [    5.437033] usbcore: registered new interface driver usbhid
16:06:40.930 -> [    5.437618] usb 7-1: New USB device found, idVendor=1c4f, idProduct=0002
16:06:40.976 -> [    5.437626] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
16:06:40.976 -> [    5.437632] usb 7-1: Product: USB Keyboard
16:06:40.976 -> [    5.437637] usb 7-1: Manufacturer: SIGMACHIP
16:06:40.976 -> [    5.439641] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 200000Hz, actual 162760HZ div = 3)
16:06:40.976 -> [    5.449907] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.0/0003:1C4F:0002.0001/input/input0
16:06:40.976 -> [    5.485523] usbhid: USB HID core driver
16:06:41.024 -> [    5.489941] ashmem: initialized
16:06:41.024 -> [    5.495055] rknandbase v1.2 2018-05-08
16:06:41.024 -> [    5.497145] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 100000Hz, actual 97656HZ div = 5)
16:06:41.024 -> [    5.504523] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input0
16:06:41.024 -> [    5.510542] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.1/0003:1C4F:0002.0002/input/input1
16:06:41.024 -> [    5.532029] rknand 30030000.nandc: rknand_probe clk rate = 150000000
16:06:41.071 -> [    5.538796] No.1 FLASH ID:2c 88 4 4b a9 0
16:06:41.071 -> [    5.542975] No.1 FLASH ID:2c 88 4 4b a9 0
16:06:41.071 -> [    5.547618] ECC:60
16:06:41.071 -> [    5.549647] FTL version: 5.0.57 20190828
16:06:41.071 -> [    5.564128] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input1
16:06:41.165 -> [    5.670527] ftl_init 0
16:06:41.165 -> [    5.675335] secureBootEn check error
16:06:41.212 -> [    5.683281] vendor storage 524b5644,2,2
16:06:41.212 -> [    5.690415] vendor storage 524b5644,3,3
16:06:41.212 -> [    5.697784] rknand vendor storage init ok !
16:06:41.212 -> [    5.702970] usbcore: registered new interface driver snd-usb-audio
16:06:41.212 -> [    5.709318] usbcore: registered new interface driver snd-ua101
16:06:41.212 -> [    5.715307] usbcore: registered new interface driver snd-usb-caiaq
16:06:41.212 -> [    5.721625] usbcore: registered new interface driver snd-usb-6fire
16:06:41.260 -> [    5.727939] usbcore: registered new interface driver snd-usb-hiface
16:06:41.260 -> [    5.734308] usbcore: registered new interface driver snd-bcd2000
16:06:41.260 -> [    5.740431] usbcore: registered new interface driver snd_usb_pod
16:06:41.260 -> [    5.746540] usbcore: registered new interface driver snd_usb_podhd
16:06:41.260 -> [    5.752834] usbcore: registered new interface driver snd_usb_toneport
16:06:41.260 -> [    5.759376] usbcore: registered new interface driver snd_usb_variax
16:06:41.260 -> [    5.770440] u32 classifier
16:06:41.260 -> [    5.773213]     input device check on
16:06:41.305 -> [    5.776896]     Actions configured
16:06:41.305 -> [    5.780336] Netfilter messages via NETLINK v0.30.
16:06:41.305 -> [    5.785081] nfnl_acct: registering with nfnetlink.
16:06:41.305 -> [    5.789975] nf_conntrack version 0.5.0 (15668 buckets, 62672 max)
16:06:41.305 -> [    5.796948] Initializing XFRM netlink socket

16:06:41.305 -> [    5.802262] NET: Registered protocol family 10
16:06:41.305 -> [    5.808150] ip6_tables: (C) 2000-2006 Netfilter Core Team
16:06:41.305 -> [    5.814172] sit: IPv6 over IPv4 tunneling driver
16:06:41.353 -> [    5.819626] NET: Registered protocol family 17
16:06:41.353 -> [    5.824133] NET: Registered protocol family 15
16:06:41.353 -> [    5.828658] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
16:06:41.353 -> [    5.841313] Bridge firewalling registered
16:06:41.353 -> [    5.845344] can: controller area network core (rev 20120528 abi 9)
16:06:41.353 -> [    5.851652] NET: Registered protocol family 29
16:06:41.353 -> [    5.856127] can: raw protocol (rev 20120528)
16:06:41.353 -> [    5.860422] can: broadcast manager protocol (rev 20120528 t)
16:06:41.400 -> [    5.866104] can: netlink gateway (rev 20130117) max_hops=1
16:06:41.400 -> [    5.872002] Bluetooth: RFCOMM TTY layer initialized
16:06:41.400 -> [    5.876947] Bluetooth: RFCOMM socket layer initialized
16:06:41.400 -> [    5.882128] Bluetooth: RFCOMM ver 1.11
16:06:41.400 -> [    5.885910] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
16:06:41.400 -> [    5.891911] Bluetooth: HIDP socket layer initialized
16:06:41.400 -> [    5.896953] 8021q: 802.1Q VLAN Support v1.8
16:06:41.400 -> [    5.901186] lib80211: common routines for IEEE802.11 drivers
16:06:41.400 -> [    5.906920] [WLAN_RFKILL]: Enter rfkill_wlan_init
16:06:41.400 -> [    5.911886] [BT_RFKILL]: Enter rfkill_rk_init
16:06:41.447 -> [    5.916492] Key type dns_resolver registered
16:06:41.447 -> [    5.921171] Error: Driver 'sc031gs' is already registered, aborting...
16:06:41.447 -> [    5.927784] flash vendor_init_thread!
16:06:41.447 -> [    5.928208] Registering SWP/SWPB emulation handler
16:06:41.447 -> [    5.936308] flash vendor storage:20170308 ret = -1
16:06:41.447 -> [    5.941862] registered taskstats version 1
16:06:41.447 -> [    5.946015] Loading compiled-in X.509 certificates
16:06:41.447 -> [    5.953271] Btrfs loaded
16:06:41.447 -> [    5.956793] rga2: Driver loaded successfully ver:4.01
16:06:41.447 -> [    5.962088] rga2: Module initialized.
16:06:41.495 -> [    5.965824] pvtm list NULL
16:06:41.495 -> [    5.969641] rk-vcodec 20030000.rkvdec: leakage=3
16:06:41.495 -> [    5.974374] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0
16:06:41.495 -> [    5.979976] rk-vcodec 20030000.rkvdec: Failed to get pvtm
16:06:41.495 -> [    5.985801] rk-vcodec 20030000.rkvdec: avs=0
16:06:41.495 -> [    5.990389] rk-vcodec 20030000.rkvdec: probe device
16:06:41.495 -> [    5.995783] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled
16:06:41.495 -> [    6.003605] rk-vcodec 20030000.rkvdec: init success
16:06:41.543 -> [    6.010574] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok
16:06:41.543 -> [    6.020693] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok
16:06:41.543 -> [    6.030270] hctosys: unable to open rtc device (rtc0)
16:06:41.543 -> [    6.048961] ALSA device list:
16:06:41.543 -> [    6.052018]   #0: DW-I2S-HDMI
16:06:41.543 -> [    6.054986]   #1: SPDIF
16:06:41.590 -> [    6.057783] ttyS2 - failed to request DMA, use interrupt mode
16:06:41.590 -> [    6.070069] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored
16:06:41.590 -> [    6.077595] squashfs: SQUASHFS error: unable to read xattr id index table
16:06:41.590 -> [    6.088333] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
16:06:41.590 -> [    6.099737] devtmpfs: mounted
16:06:41.638 -> [    6.103721] Freeing unused kernel memory: 796K
16:06:41.638 -> [    6.108207] This architecture does not have kernel memory protection.
16:06:42.849 -> [    7.320732] random: dropbear: uninitialized urandom read (32 bytes read, 38 bits of entropy available)
16:06:42.849 ->

16:06:42.849 -> Debian GNU/Linux 10 multitool ttyS2
16:06:42.897 ->
16:06:42.897 -> multitool login: root (automatic login)
16:06:42.897 ->

16:06:43.040 -> sh: 1: cannot create /run/motd.dynamic.new: Read-only file system
16:06:43.040 ->
16:06:43.040 -> The programs included with the Debian GNU/Linux system are free software;
16:06:43.040 -> the exact distribution terms for each program are described in the

16:06:43.040 -> individual files in /usr/share/doc/*/copyright.
16:06:43.040 ->
16:06:43.040 -> Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
16:06:43.085 -> permitted by applicable law.
16:06:43.085 -> -bash: cannot set terminal process group (-1): Inappropriate ioctl for device
16:06:43.085 -> -bash: no job control in this shell
16:06:43.132 -> root@multitool:~# [ 8.943583] vendor storage:20190527 ret = -1
16:06:49.853 -> [ 14.355689] random: nonblocking pool is initialized
16:07:28.637 -> [+Z\\@S,@ѹѳй

fukowaka · August 31, 2022

Hello people! Reporting me here. Yesterday i succesfully boots legacy version of @jock images. He told me try to boot current versions from the mainline.
Tried...

rk322x-box jammy current cli 286.66 Mb kernel 5.15.63

rk322x-box jammy current xfce 723.94 Mb kernel 5.15.63

rk322x-box sid current cli 341.22 Mb kernel 5.15.63

rk322x-box sid current xfce 627.60 Mb kernel 5.15.63

Also tried Armbian_22.05.0-trunk_Rk322x-box_bullseye_current_5.15.25_minimal.img made by @jock

One by one burned into the emmc. Starts booting like for 5 seconds then reboots. Last i can read is "tty2" then reboots again, endlesly
Anyone know what could be happening? What can i do?

Im with rk3229 1gb ram, 8 gb samsung emmc model KMVUS000LA B304. Wifi chip model: SV6051P

thanks again

fukowaka · August 31, 2022

@Eliel Prado what kernel are you trying to boot? You should try some legacy kernel, just to see if works.

https://users.armbian.com/jock/rk322x/armbian/stable/ the first one works for me.

Also you can check this tutorial from a brazilian dude with nand memory.

Eliel Prado · September 1, 2022

@fukowaka I tried these images: Photo

But none does not crash. Even the multitool, I couldn't do a backup because it would take more than 30~60 seconds to do that. Any image I try, none works for more than a minute.

I'm Brazilian and I followed this video tutorial, I even tried to compile an image, but so far nothing.

I'm booting from the SD card, because the way things are, it wouldn't be possible to install on NAND through the multitool.

There doesn't seem to be any hints in these debug lines.

Spoiler

DDR Version V1.10 20190926
20:47:10.294 -> In
20:47:10.294 -> ID:0xFFF
20:47:10.294 -> 660MHz
20:47:10.294 -> DDR3
20:47:10.294 -> Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
20:47:10.294 -> mach:2
20:47:10.294 -> OUT
20:47:10.341 -> Boot1 Release Time: May 13 2019 17:02:59, version: 2.56
20:47:10.341 -> ChipType = 0xc, 268
20:47:10.341 -> No.1 FLASH ID:2c 88 4 4b a9 0
20:47:10.341 -> ECC:60
20:47:10.341 -> FTL version: 5.0.56 20190508
20:47:10.756 -> mmc0:cmd5,20
20:47:10.897 -> SdmmcInit=0 0
20:47:10.897 -> BootCapSize=0
20:47:10.897 -> UserCapSize=60906MB
20:47:10.897 -> FwPartOffset=2000 , 0
20:47:10.897 -> StorageInit ok = 542667
20:47:10.944 -> SecureMode = 0
20:47:10.944 -> SecureInit ret = 0, SecureMode = 0
20:47:10.944 -> atags_set_bootdev: ret:(0)
20:47:10.944 -> GPT 0x63337df8 signature is wrong
20:47:10.944 -> recovery gpt...
20:47:10.944 -> GPT 0x63337df8 signature is wrong
20:47:10.944 -> recovery gpt fail!
20:47:10.944 -> tag:LOADER error,addr:0x2000
20:47:10.944 -> hdr 633377e0 + 0x0:0x00000000,0x00000000,0x00000000,0x00000000,
20:47:10.944 -> tag:LOADER error,addr:0x4000
20:47:10.992 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x91,0x05,0x00,0x00,0x9e,0x1e,0x0e,0x60,0x9e,0x1e,0x0e,0x60,
20:47:10.992 ->
20:47:10.992 -> tag:LOADER error,addr:0x2800
20:47:10.992 -> hdr 633377e0 + 0x0:0x000081ed,0x000005ed,0x600e1e9a,0x600e1e9a,
20:47:10.992 -> tag:LOADER error,addr:0x4800
20:47:10.992 -> hdr 633377e0 + 0x0:0xed,0x81,0x00,0x00,0xac,0x36,0x00,0x00,0x9e,0x1e,0x0e,0x60,0x9e,0x1e,0x0e,0x60,
20:47:10.992 ->
20:47:10.992 -> tag:LOADER error,addr:0x3000
20:47:10.992 -> hdr 633377e0 + 0x0:0x000081a4,0x0000096e,0x600e1e9b,0x600e1e9b,
20:47:10.992 -> tag:LOADER error,addr:0x5000
20:47:10.992 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x1c,0x00,0x00,0x00,0x9e,0x1e,0x0e,0x60,0x9e,0x1e,0x0e,0x60,
20:47:11.039 ->
20:47:11.039 -> tag:LOADER error,addr:0x3800
20:47:11.039 -> hdr 633377e0 + 0x0:0x000081a4,0x000045bc,0x600e1e9c,0x600e1e9c,
20:47:11.039 -> tag:LOADER error,addr:0x5800
20:47:11.039 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0xd3,0x03,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.039 ->
20:47:11.039 -> tag:LOADER error,addr:0x4000
20:47:11.039 -> hdr 633377e0 + 0x0:0x000081a4,0x00000591,0x600e1e9e,0x600e1e9e,
20:47:11.039 -> tag:LOADER error,addr:0x6000
20:47:11.039 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x49,0x00,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.039 ->
20:47:11.039 -> tag:LOADER error,addr:0x4800
20:47:11.039 -> hdr 633377e0 + 0x0:0x000081ed,0x000036ac,0x600e1e9e,0x600e1e9e,
20:47:11.085 -> tag:LOADER error,addr:0x6800
20:47:11.085 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x8d,0x01,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.085 ->
20:47:11.085 -> tag:LOADER error,addr:0x5000
20:47:11.085 -> hdr 633377e0 + 0x0:0x0000a1ff,0x0000001c,0x600e1e9e,0x600e1e9e,
20:47:11.085 -> tag:LOADER error,addr:0x7000

20:47:11.085 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x08,0x07,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.085 ->
20:47:11.085 -> tag:LOADER error,addr:0x5800
20:47:11.085 -> hdr 633377e0 + 0x0:0x000081a4,0x000003d3,0x600e1ea1,0x600e1ea1,
20:47:11.085 -> tag:LOADER error,addr:0x7800
20:47:11.130 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x12,0x00,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60,
20:47:11.130 ->
20:47:11.130 -> tag:TOS    error,addr:0x4000
20:47:11.130 -> hdr 633377e0 + 0x0:0x000081a4,0x00000591,0x600e1e9e,0x600e1e9e,
20:47:11.130 -> tag:TOS    error,addr:0x6000
20:47:11.130 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x49,0x00,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.130 ->
20:47:11.130 -> tag:TOS    error,addr:0x4800
20:47:11.130 -> hdr 633377e0 + 0x0:0x000081ed,0x000036ac,0x600e1e9e,0x600e1e9e,
20:47:11.130 -> tag:TOS    error,addr:0x6800
20:47:11.130 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x8d,0x01,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.175 ->
20:47:11.175 -> tag:TOS    error,addr:0x5000
20:47:11.175 -> hdr 633377e0 + 0x0:0x0000a1ff,0x0000001c,0x600e1e9e,0x600e1e9e,
20:47:11.175 -> tag:TOS    error,addr:0x7000
20:47:11.175 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x08,0x07,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60,
20:47:11.175 ->
20:47:11.175 -> tag:TOS    error,addr:0x5800
20:47:11.175 -> hdr 633377e0 + 0x0:0x000081a4,0x000003d3,0x600e1ea1,0x600e1ea1,
20:47:11.175 -> tag:TOS    error,addr:0x7800
20:47:11.175 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x12,0x00,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60,
20:47:11.175 ->
20:47:11.175 -> tag:TOS    error,addr:0x6000
20:47:11.220 -> hdr 633377e0 + 0x0:0x0000a1ff,0x00000049,0x600e1ea1,0x600e1ea1,
20:47:11.220 -> tag:TOS    error,addr:0x8000
20:47:11.220 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x73,0x03,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60,
20:47:11.220 ->
20:47:11.220 -> tag:TOS    error,addr:0x6800
20:47:11.220 -> hdr 633377e0 + 0x0:0x000081a4,0x0000018d,0x600e1ea1,0x600e1ea1,
20:47:11.220 -> tag:TOS    error,addr:0x8800
20:47:11.220 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x1e,0x00,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60,
20:47:11.220 ->
20:47:11.220 -> tag:TOS    error,addr:0x7000
20:47:11.220 -> hdr 633377e0 + 0x0:0x000081a4,0x00000708,0x600e1ea1,0x600e1ea1,
20:47:11.265 -> tag:TOS    error,addr:0x9000
20:47:11.265 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0xcd,0x3a,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60,
20:47:11.265 ->
20:47:11.265 -> tag:TOS    error,addr:0x7800
20:47:11.265 -> hdr 633377e0 + 0x0:0x0000a1ff,0x00000012,0x600e1ea2,0x600e1ea2,
20:47:11.265 -> tag:TOS    error,addr:0x9800
20:47:11.265 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x08,0x1e,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60,
20:47:11.265 ->
20:47:11.310 -> SecureMode = 0
20:47:11.310 -> SecureInit ret = 0, SecureMode = 0
20:47:11.310 -> atags_set_bootdev: ret:(0)
20:47:11.310 -> GPT 0x63337df8 signature is wrong
20:47:11.310 -> recovery gpt...
20:47:11.310 -> GPT 0x63337df8 signature is wrong
20:47:11.355 -> recovery gpt fail!
20:47:11.355 -> LOADER Check OK! 0x61000000, 1021927
20:47:11.402 -> TOS    Check OK! 0x68400000, 1068982

20:47:11.402 -> Enter Trust OS
20:47:11.448 -> INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日星期五 03:32:22 UTC arm)
20:47:11.448 ->
20:47:11.448 ->
INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0
20:47:11.448 ->
20:47:11.448 ->
INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000
20:47:11.448 ->
20:47:11.448 ->
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
20:47:11.448 ->

20:47:11.635 ->
20:47:11.635 -> U-Boot 2020.10-armbian+ (Mar 12 2021 - 13:38:05 +0000)
20:47:11.635 ->
20:47:11.635 -> Model: Generic Rockchip rk322x TV Box board
20:47:11.635 -> DRAM: 1010 MiB
20:47:11.775 -> MMC:   dwmmc@30000000: 1, dwmmc@30020000: 0
20:47:11.822 -> Loading Environment from EXT4... Card did not respond to voltage select!
20:47:11.822 -> In:    serial@11030000
20:47:11.822 -> Out:   serial@11030000
20:47:11.868 -> Err:   serial@11030000
20:47:11.868 -> Model: Generic Rockchip rk322x TV Box board
20:47:11.868 -> Net:   eth0: ethernet@30200000
20:47:12.008 -> starting USB...
20:47:12.008 -> Bus usb@30040000: USB DWC2
20:47:13.273 -> Bus usb@30080000: USB EHCI 1.00
20:47:13.320 -> Bus usb@300c0000: USB EHCI 1.00
20:47:13.320 -> Bus usb@30100000: USB EHCI 1.00
20:47:13.366 -> scanning bus usb@30040000 for devices... 1 USB Device(s) found
20:47:14.482 -> scanning bus usb@30080000 for devices... 1 USB Device(s) found
20:47:15.652 -> scanning bus usb@300c0000 for devices... 1 USB Device(s) found
20:47:16.775 -> scanning bus usb@30100000 for devices... 1 USB Device(s) found
20:47:17.937 ->        scanning usb for storage devices... 0 Storage Device(s) found
20:47:17.937 -> Hit any key to stop autoboot: 0
20:47:17.984 -> switch to partitions #0, OK
20:47:17.984 -> mmc1 is current device
20:47:17.984 -> Scanning mmc 1:1...
20:47:17.984 -> Found U-Boot script /boot/boot.scr
20:47:18.031 -> 2909 bytes read in 6 ms (472.7 KiB/s)
20:47:18.031 -> ## Executing script at 60000000
20:47:18.031 -> Boot script loaded from mmc 1
20:47:18.031 -> 165 bytes read in 5 ms (32.2 KiB/s)
20:47:18.358 -> 7246089 bytes read in 324 ms (21.3 MiB/s)
20:47:18.771 -> 8771432 bytes read in 388 ms (21.6 MiB/s)
20:47:18.771 -> 49812 bytes read in 10 ms (4.8 MiB/s)
20:47:18.816 -> 232 bytes read in 7 ms (32.2 KiB/s)
20:47:18.816 -> Applying kernel provided DT fixup script (rk322x-fixup.scr)
20:47:18.816 -> ## Executing script at 600f0000
20:47:18.816 -> ## Loading init Ramdisk from Legacy Image at 64000000 ...
20:47:18.816 ->    Image Name:   uInitrd
20:47:18.816 ->    Image Type:   ARM Linux RAMDisk Image (gzip compressed)
20:47:18.816 ->    Data Size:    7246025 Bytes = 6.9 MiB
20:47:18.816 ->    Load Address: 00000000
20:47:18.816 ->    Entry Point: 00000000

20:47:18.816 ->    Verifying Checksum ... OK
20:47:19.005 -> ## Flattened Device Tree blob at 61f00000
20:47:19.005 ->    Booting using the fdt blob at 0x61f00000
20:47:19.052 -> EHCI failed to shut down host controller.
20:47:19.100 -> EHCI failed to shut down host controller.
20:47:19.146 ->    Loading Ramdisk to 67d16000, end 683ff0c9 ... OK
20:47:19.379 ->    Loading Device Tree to 67ca1000, end 67d15fff ... OK
20:47:19.427 ->
20:47:19.427 -> Starting kernel ...
20:47:19.427 ->
20:47:28.425 -> [    8.233086] mali-utgard 20001000.gpu: Failed to get pvtm
20:47:28.560 -> [    8.348879] devfreq 20001000.gpu: Couldn't update frequency transition information.
20:48:06.446 ->

20:48:06.446 -> rk322x-box login: root (automatic login)
20:48:06.446 ->

20:48:07.469 ->       [0;1;34;94m_[0m    [0;1;34;94m_____[0;34m____[0m [0;34m____[0m            [0;37m_[0m
20:48:07.469 -> [0;1;34;94m_[0m [0;1;34;94m__|[0m [0;1;34;94m|[0m [0;34m_|___[0m [0;34m/___[0m [0;34m\|__[0;37m_[0m [0;37m\__[0m [0;37m__[0m    [0;37m|[0m [0;37m|[0;1;30;90m__[0m   [0;1;30;90m_____[0m [0;1;30;90m__[0m
20:48:07.469 -> [0;34m|[0m [0;34m'__|[0m [0;34m|/[0m [0;34m/[0m [0;34m|_[0m [0;34m\[0m [0;37m__)[0m [0;37m|[0m [0;37m__)[0m [0;37m\[0m [0;37m\/[0m [0;1;30;90m/____|[0m [0;1;30;90m'_[0m [0;1;30;90m\[0m [0;1;30;90m/[0m [0;1;30;90m_[0m [0;1;34;94m\[0m [0;1;34;94m\/[0m [0;1;34;94m/[0m
20:48:07.516 -> [0;34m|[0m [0;34m|[0m [0;34m|[0m   [0;37m<[0m [0;37m___)[0m [0;37m/[0m [0;37m__/[0m [0;37m/[0m [0;1;30;90m__/[0m [0;1;30;90m>[0m [0;1;30;90m<_____|[0m [0;1;30;90m|[0;1;34;94m_)[0m [0;1;34;94m|[0m [0;1;34;94m(_)[0m [0;1;34;94m>[0m [0;1;34;94m<[0m
20:48:07.516 -> [0;37m|_|[0m [0;37m|_|\_\____/[0;1;30;90m_____|_____/_/\_[0;1;34;94m\[0m    [0;1;34;94m|_.__/[0m [0;1;34;94m\___[0;34m/_/\_\[0m
20:48:07.561 ->
20:48:07.561 -> Welcome to [0;91mArmbian 20.11.6 Focal[0m with [0;91mLinux 4.4.194-rk322x[0m
20:48:07.561 ->
20:48:07.561 -> [0;91mNo end-user support: [0mcommunity creations
20:48:07.561 ->
20:48:07.561 -> System load: [0;92m 43%[0m             Up time:       [92m0 min[0m
20:48:07.561 -> Memory usage: [0;92m 16%[0m of 994M     IP:            [92m[0m
20:48:07.561 -> CPU temp:     [0;91m 70°C[0m            Usage of /:   [0;92m 4%[0m of 58G
20:48:07.608 ->
20:48:07.608 -> Last login: Mon Jan 25 01:24:08 UTC 2021 on tty1
20:48:11.445 -> [9hjjNa:N⸮⸮⸮⸮⸮⸮⸮⸮l⸮⸮⸮⸮@NfN⸮⸮

Edited September 1, 2022 by SteeMan
moved log to spoiler

jock · September 1, 2022

13 hours ago, Eliel Prado said:

I'm having some issues with my Rockchip 3229 TV box. It has 3GB of DDR3 ram, 4GB of NAND memory.

This makes me think you have some fake specs: rk322x cannot address more than 2GB of RAM and 4GB NANDs are pretty uncommon - never seen any rk322x with that amount of flash memory.

Looking at the log dump I see 1Gb of RAM for your board.

Anyway I don't understand why you are such an old image from 2020...

fukowaka · September 1, 2022

i dont know how to extract the log from de emmc so i film the boot process. Any idea?

Eliel Prado · September 1, 2022

@jock In fact I tested it on over 15 images. I started from the current ones, going to the older ones. This was just one of the boot logs I took. I'll try to see if it really has 3 gb of ram, at least on Android it said that. But I confirmed that the datasheet would only go up to 2gb.

fukowaka · September 2, 2022

i went back to 4.4 kernel. desktop version perfermance is similar to rpi3b+. Boots and shutown faster.
ethernet, wifi, web browsing... so far so good.

Edited September 3, 2022 by fukowaka

Neil Wolfkid · September 4, 2022

Hello! I'm new at this "linux-on-esoteric-arm-devices" thing (I literally just made an account) and I tried to install this version of armbian provided on this post onto a cheap "MXQ Pro 4K 5G" TV Box (weird name, i know) .
Everything works phenomenal, but it seems like there's zero hardware acceleration (glxinfo says i'm using llvmpipe as my gpu driver and everything GUI is unendingly sluggish), I also tried to use apt-get upgrade but it didnt update the kernel at all, probably because NAND devices are only supported by the legacy kernel, And yes, I DID use the rk322x-config thingy and no possible configuration gave me working GPU accel.

My device has a NAND chip, 952 MB of ram or close and 7G of "disk??" space.

dmesg: https://pastebin.com/xRmrye6r

(Also, forgot to mention that my One by Wacom drawing tablet doesnt work on it either...)

Edited September 4, 2022 by Neil Wolfkid

jock · September 4, 2022

@Neil WolfkidHello!

You're a bit out of luck: if you want to use the legacy kernel builds you need to install the multimedia framework, which is unmaintained anymore and probably won't work on latest ubuntu versions (it was conceived for Focal).

Mainline kernel builds instead have out-of-the-box support for 3D acceleration via Lima driver, and also hardware video decoding is supported in hardware (but in this case you may need specially crafted software - in few words: it does not work yet out of the box). In case you use mainline builds, you lose access to internal NAND: an experimental driver was brought up, but it happened it was not working as it was meant to.

Sign In

CSC Armbian for RK322x TV box boards

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation

Important Information