fabiobassa Posted August 23, 2022 Posted August 23, 2022 @faxe2110 Without a uart log very difficult debug why doesnt boot 0 Quote
Vittorio Mori Posted August 23, 2022 Posted August 23, 2022 Just to let you know, and maybe give you some inspiration: playing with OpenWRT on this device (see my post), I've discovered that now there's support for LXC containers. So I installed a Debian-bullseye minimal rootfs as a LXC container in the device and now I run a pi-hole in it. So I get the router part via OpenWRT and the adblocker + a very fast and reliable dns/dhcp w/pihole together in the same device. Indeed very cool, with a $9 device, also quite fast. I'm amazed. 0 Quote
faxe2110 Posted August 24, 2022 Posted August 24, 2022 (edited) Hey, well i found the issue. Inside the Box is NOT a RK3229 but a AMLogic S805 on a m201C_AP Board. After i knew that, it was more a "easy" to run Armbian on that device. Right now i´m running Debian Buster on a 128GB SD and it seems to running well. But is there a way to get it on the intern flash?? I think this will not be the right place for asking that in this post. So if anyone has a link inside the Forum it will be amazing. I will also search by my own. @Vittorio Mori nice i will take a look at it thanks for the hint. Edited August 24, 2022 by faxe2110 0 Quote
ninh Posted August 24, 2022 Posted August 24, 2022 I got error when booting multitool from sdcard: <\0>DDR Version 2.06 20170316<\r><\n> In<\r><\n> 1A1A292B 0<\r><\n> 1A1A2A2B 3<\r><\n> LPDDR2<\r><\n> 2A2B2A2B F<\r><\n> Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB<\r><\n> mach:14<\r><\n> OUT<\r><\n> Boot1 Release Time: 2017-06-12, version: 2.40<\r><\n> ChipType = 0xa, 1377<\r><\n> SdmmcInit=2 0<\r><\n> BootCapSize=1000<\r><\n> UserCapSize=3696MB<\r><\n> FwPar??????*<\0><\0><\0>?<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?<\0><\0><\0><\0>?<\0>??<\0> <\0>0<16>)!p?>DOH<\0>xf?<18>:???'O?<\r>.D<\0><1> <18>???X ?<26>_>4n<19>?"AJ???6u<6>?<\0>z<4><\0><6> ?<\0><16> ??h?<16><1><6>?l??)R<1><16><21><\b>V`????2PC X<\0>?X(<25>@<\0> @*<18><20> K(<11>?$"b?????#?<19><15><\0><\0><\f><2>D<\0>a<24><18>LP<\b>B<\0><17><26>?<6>&?<4><\b> ?<31>;??8Ji<27>??7<11>0L?<2><1><2>??)<5>?<20>??(<\0><1>?<\0><9> M?<1>@?? ??X<25> ?<19>T<\b>F<4><\0>2<1><\0>h0<\0>E<16><\0>?d ?@?2_H<2>EWCR?<2> b<2><\0>?A???I?<16><5>(<4>?<25>?<27>Qt!p2<4><18>?<16><4>ARZ<\0><1>?.<\b>$C?P?@<\0>?2???<2><15><\0>?7?C??<\0><4><\0><\b><19>???<\b>?<\0>?=<2>?<9><\0>!S <6><\f>D?BA@R<\0>@?H<9> <\0><\0><26><1>??<\f>?\<16><\f>G8Q5<16>?@b??<\b><2>?<3>!<1>=5R<4>3?<6><\0>$?#!?<24>0z#!B ?N<2>??@?B<\r> ?4<16>?Iw?<1>?L??<3><15>0:??<2><2>?N<\0>?5??k?<\b><2>h????<\f>j<6><\b>??????@??:<\0>?.<\0>?@PX?<\b>?|p,<2><14><6>????W????<4>?9<\0>??F????B <7>??e?<4>9<20>?<\0><16>??b<\b><20><16><4>r?<\n><1>tT)?<4>?<5><2><21>@<17>?0<1><16>?<\0><16><20>???<17><4> <\0>e3?X<1>???<2>?`??b??X??F??]<20>?<1>E?H<14><\f><3>?,sCNXK:?1???cp"??I@<1><11>??<16>?<1>??<5>?HA<19><28>i??<16>??<11>???'n<\b>??!<3>h??T$2?m?.?<18><2>F???P?K?Pp<\0><1??d(>?<25>?<9> ?-F.<4>?<\b>??<\n>?<24>s<18> <14>@<\0>??H?<4>p?Qi??Y_<24>R?7?<\0><16>??<1><24>H???<\0><19><1>P<1><20>?M?evI5???<\r> ??t?K?<22>??<\n>?c??<\0>??<\0>???!??(??<4><6>!?<\b>%:<\0><\0>???<20>?0??lD<4><26>?B0(?M?K <\0>sb???|?<\f><26>s<22>?<17>R@?B?$?<18>l?GL1?y!<\f>?<2>(<2>??<\b>(?<\0><\n>?B b?<\f><\0><\f> <2>d??? W?UE<20><1><17><\0>??<20>Jh??<16>!? ?V<\0><\b>i<17>??<\b>??<16>9<25><22>I??X"!4#??<14>?U<\0><16>?<4>@X???K??B??<16>??<25><11>]R!<\0>??<\b><1> Th<\0>Y??B M?z?%?<4>+<\b>??I?T<4>??W?<\r>F???????K?G?\?&h?B*9?@N3C?'.<18><4><4>??<\n>9?QK<2>??<2><4>*B_?h?<21>w<14><\0>??<1>H=hXC<18>-v0Q?<7> m.?L<1>?<17>L#6H??<14>3)?W?a?HI?R<\b>BI??S?X`<\b><\b>?<27>?<9>?g<\n>?<\0>`<3><5>L<21>FL?<16>?X?<17><\b>?,<11>!?<2><\0>??<22><26><\0>Y ?@T??<24><\0>?L???6%?B??#~o?`<4>F???`"(Q?#?MSb)!?X<29>(<21><28>!)<3>?H<5>???jO?<20><3>$??10?/??U;H???A\<17>@q<\n>?<16><23>f`$<\0>?<\n><\b>T?@l<\f>?P<\f>??X<21>`???c?X<18> #@??<\b><17>f<\0>I<16>'?<19><4><19>E??<\f>@a??<\f><\0>P!'?<2> ??XHC???HD=(<\b><1>?h<2><\0>?`<\0>?H?<30><16>b?L<\b>&R?w?<3>?<16>@ <19>2]J?%IjV??<\r>?E:<9>1F??<6><19>d`<\0>0??<28>?<24>~?<31>???<2><2>k#<9>M??<9>?$?<24>@?<\0>??<\n><2>?P?!b<20>?4l<30><\0>?L<18>?<5>?z<11>GJ?I???G?B<\f>?<28>Z<\0><\0>dH<\b>2@g????<20><1><5>`?@?<1>Q<6>?<18>@"<20>?%<29>?<\0><9>`<\0><2>!<9>t<2>h<1><24>??<1>(C?<4>A<\b><\0><4>iH<1>?<15>E<4>H<3>K???<4>?`c?FD??d?<\0>?(g<\0><1>N?<\n>? ?<9><24>??<6>?<\0> ??$?<24>#?<\b>?P?`D!!?(?<5>6`?<\0>[Wd ?<\f><\0>,?B(?<]??<6>`<1><19><\b>?<26><9>?, <17><\f><\0>??<31>:?@?Q<5>?<4>E<\f>??<\n>??<4>??<4><11>M?<\0>(dP?"<24>?&B3$?D<\0><\f>?#"<\n><\b><4>?<9>0<\0><24>$<4>?<17> <\r><16>?A2?,<26>?<\0><1> P+?<\0>?????P*<9>(<17>I@<20>HM?<26>$&???B<18>??<\0>B`?b??? <\b>0r??@<4>?<18><1>?8YDH?`\?9<20>x?6<1>L<\b><1>???<4>$ <5>? <\r><2>??P<7>?<16><9>i`?A<\0>%<1>z??~R<29>???`1?|<28>??<24><4><4>?0#<6>???<1><\b><\b><\b><20>@<17>@<\0>`<17>%<18>B??P??P<\b><\0><\0>`1<2>? ?"?<18>@`<\b>*?<3>H)`<\0>H??$G<\0>T<3><\b><\0>L <16><24>Sf<\b>?<\0><4><\0>"?<\0><4><16>A<\0>b6<16><\0>?<4><\0><24><\f>?<\0><\0>!@L<6><\0><\0>@@?<2>"1<\0><19>(<4>? ?<22>#<18>?@?<6>J????<22>?? <4><15>?DP?L<18>?<28>?<3>?@?<18><18>?<19><20><\0>*.g??<24>QK? 8?<6><18>vMjy,?<\f>?@Y?B?????1?<16>a?*<24><1>I<\0><\0>?<11>B?<3><\0>?"Q?q??<2>??xH<\0><20>5Pc<\0><16><\0>W?7?&<\r>9?9I<1>?<\b><\b>1<16>?<1><30><\0><17><\b>C?<25><\r><1><2><\f>`<6>w ?<\0>?<5>:?,?6??<1><\0><20>?<24>&?<3><\r>?H??F???<\b>??q?pu?J???W??<2>??r?<\n>4?^$?Z?D?B?<\0>&O<1><9><16>?<\r><20>?f`<7><19>???<<14>??<4>07<14><\0>??<4><\0>X(<2>E????<21><16><\0>f?<30>Q,~<\0>?<\b><16>H@+?@@<2><\0><\0>*? <7><1><\0> BP<\0>@A<\0>!<4><\0><\0>??<18>@<\0><2>!?$<4><20><\0>?<\0>P/?,?<1>??V?k<1>V?P%?<6>T??%?<9>@U@<2>`+<1>><\n> <\0><\0><16><\0>`<\0><1>P?<\r><\0><17>@??@<1><\0>B<4><3>?<1>Q<4><\b><\n>?<6><2>?@c<\0><\0>0<\0>?PHH<20>-I<4>?<2>?H?<4><26><\0><\0>@P<\f>H<1>S<4>0<\b>? AB<17><14><\0>@! <\n>?`?<\0><18>?<16>?<9>?<\0><3>P <4><\0>?<\0>@<9><\0><\0><24><\0>??@<4><\0><4><1><\0><\f><4>B?<\0> <17><3><\0><\0>?<2><\0>?@<6>@<\0><16>l<2>?@<\0><\0><\0> <\0><\0><14><4><\0>? <4><\0><1>?<\0><\f><\0><\n><24>X<16>??<\0>??<\b>??<\0>!<\0>8`!<17>??<2><\0>?<\0><\n><\b><\n><\0>?&<\0><\0><\0> <2><17><\b>b? ??<2><\0><24><\0><\0><\0><\0>H ?<\0><\0><\0><\0><\0><\0><18><\0><\0><16><\0> <\0><\0><\b><4><\0> P<\0><2>&@<\0>?<\0><\0>? <\0> <\0><2>M?<9>?<16>?(<16>?<\0>0<\0><\0>?<\0> <\0>@?<\0><\0> <4>!<1>F<\0>8<6><\0>??<\0><\0><3><\0> <\b><\0><2>?<2>`<1><\0><\0><\0><24><\0><\0><\0><\0><\0><\0><\0>@<1><\0>?<\0><\0>!<\0>H?@??<\0>@?Ax?<11>??<\0>2 ?B<\0>?<\0><6>?!<25><3><\0>?P<4>0??<4><5> <\0>3<29><1><6><\0><1>"<\0><\0><\b>?R0@<\0>?!<20> ?A<\0>(<20>P<18><2>P@?<1>?<\0><3><4>?<\0><\0>?iE<\f>`<9>-@<\0><\0><\0><\b>@b<1><\0><\b><1>@A?<16>x<\0><16><3>?<\0>?<2><20><4><\0>@<\0><5><2>?F<\0>?$x<\0><1>?<16><2>C$<2>@<4><\b><22>?j<\0><18>?P??8<4><\b>??J?<1><9>R$<2>?P<3><2><16><\n><\b><\b><\b>(<24>?<16>J?<\0>0<\0>?| <\n>PU?<\0>`???<\0><\0><\0><24>?<\0>?<2><\0> ?<2><\0>A<24><\b><4>`?<2>?Q?<16><16><\0>,?<16><16>X<\0>%<18><\0><16><\0><16><\0><\0>?<\0><\0>?<\0><\0><\0><\0>h<6><1>`<1><\0><\0><\0> ? X?<2><\0><1><\b><\0>?<\0><4><\0><\0><\0><20><\0>?@@? <4>@ <24>@J<\b><5><\0>I<\n><17>@?<\0><\0><\0><18><\0>P?@$ <\n>?(<\0>J<6><\0><2><\0><\0>?<\0><17><\0><\0><\0><\0><17>?<\0><\0>EU<19>d<4><\0><\0><1><\0><2><17>)<\0>??j? <18>?<2>H<6>T<21><6><\0> A<\0><\0>@<\0><\0><16><18><\0><4><\f><6><20><\0>?<\0><\0><16><1><\0>@<\0><\0><24><\0><\0> <\0><\0><\0> <\0><\0>?<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?<\0><\0><\0><1><\0>?????}?o??????{o??{[o??{?[k???o???o??{oo?{o??m{??{o{?{??????????????_??]????_???????}???W??]y?????????{???m?????????????m???{{???{{[??[m{{?om??????????7??????m?k???????os?{o?{{?{o?k?om??{n????_???????k?????W?????{?{o????????{?[?????[?{??{?????k???]W????^???u{??????????[?_???<\0><22><\0><1><\0><\0><6><\0><\0>@<\0><2>F<2><2>?<2><\0><4><14><4><\0>`<\0><\0> <\0><\0><\0><6><\0><\0>?<\0><\b>?<\0><\b>??<\0><\0>$<\0> <\0><\0><\0><\b><5><\0>0<\0>0<4><\n><\0><2><\0><\0> @<\0>?<\0> <\0><2><\b><\0><\0><5><2><\0><\0><\0><\0><1><\0><\0><\b><\0><\0>?<\0><\0><\0><4><\0><\0><\0><\0><\0>`<16><\0><\0> <\0><\0><4>H<\0><\b><4><\b>?<\0><\0><\0><2><4><17>M<5><\0><16>??<\0><6><5><2><\0><21>5<4><18><18>??@<1>???!?<1>H?1<27>??O<\0><\0><\0><\0>????<\b>I<\0> 4?<18>????b?3?8?,4@<\0>?<\0>????f?<\f>?b<18><16><1><26>?P!<15>?1"$<7>???P?0r1<18><22>A?O<24>?f?<20>1`?T<\b>?a<\0>Z<1>????b<\0><4><4><16><16>?<\0><4>?|`<14><6>A?&<16><\0>H?<3>H0<2>t?@<17>`?<6>0<4>*R<\0> <6>L<9>???( K?Z<4>?? <6>H@??<18>??H?"?<16><4>8?<4><\0><\b>??<\f>P?c<4>?0?<26>?<\f>," <\0>C`??<\0><16><\0>?<16><\0><6>B<2><2><\0>?/<2>?<26><25>?<9><14>p?j??<18>?<\r><18>A?<2>?B6??<16>"<\b><\b><6> <\0>A@<2> DP????<20>J%Ag@<16>"<16>5D<5>R??<\0>@<18>4<2>??<2>?" DB?<\0>% ??<\n><2>?<4>?<28><4><\0>?-<\0>P??<\0><3>?<\b><2>0??P<\0><\b>P<\0>?D? THBJ0CK<\0>?<16><5>???<24><\0>LL<\0><4>PT<\f>?<\0><16><\0><4>@?<2><\n>?d<\0>?@<\0>#D??KP@?0<\0>@<\b>PR-?!<28>(<16>0<4>?<28>?<\b><18><9> <17>?<\0>L`?<\n> %?<\0>%<2>?c<22>?b@<\b><16>??H<24>S<\b>?<21>A<\0><6>$<\0>&@<\0>???BI!?<4>?@BL<\0>@@ ?T<6>a`:<4>?D<\r>?<20>?<\0>V<\0>90p"Y<2> ?<27>?<\0>?R?<1><2>q<1><1>?? <\r>?<\0>?A<16>"? 0?<16>Q<19>?"E??<7><\0><16><1><20><\n><4>Q<4>Q!<19>?<4><4>?<\0>@??????P<16><5>?<\b><\0>?<2><\n><18>?2?<24><2>?<\0>"?B@<3>?<\0>?<\0>r)2)??<\r>l<4> <6>B:?IA$D)A<2>R@?<7>e?<5><5>?B?<4><\0>??<3>X<\0>?<\n><\0>C??h<16>?<\0><2>?8??S<16>??<\n>?<\b><4>@<14>???<5>?#<3><16>#<16><4>A? <4><\b>$b<7><28><18><16><\0>???$<\0>?<20>@?<2><\0><21>"j?E<17>?<1><16>0?@!??<18><6><2><\b>"<26><\b>?<9><\0><16>?<4>?8?A<18>(<1>#&<16>???<\b>?A?<2><4>?<9>A<2>??<1>*<16>?1V?0<7><20>,<\b><5>hQ<7><\f>n<\b>?E<\n>p<\b><28>08<\0>\??H<\0><\0><22>??H<16>?B?<26><1><2><16><\0>((<\f><4> SBF?k8<20>??0F?<\0><2> <\0><2> <16><18>0?<3>?<6><25>a<16><17>?,!h?@0?<18><4>F<26><21>?<30>?<\0>??<9>?8P<\0>$<3>????<9><\0>? ?<24>0H<25><\r><4>??<16><17>!<\0>.?<1>?'@<\b><1><24> L??<\b>C?%<9>B<16>?a <25>,?<1>1<9><16>`<24><\0>?*<\0><1><2><7><\f><\b>-???<\0><17>eP<\0>&? ?<1><\0><20><16>"?@<5>(<\0>P<16>C(<\0>?<1>@?<4>?<\0> <\0><21>0?<24><\b><11>.?&?0q2?<\0>(<\0>?<5> <2> <\n>$<\0><\0>?<\0>H<2><1><\0><\b><\f><\f><19>(<\r> <\b><26><\0><1><2><16>`<\0>??3???<28><3>P?<3><\0><2>?<17><\b><5>!Q $?<\0>`l<16><4>?<\0>B?<\0><1>"D<2>?<\0>@<4>C<4>??<18>!? <\0>?)@<\f>TF??B?K??<\0>?@+,<\0>P<\f>?<\0><\f>A8<14>??<5>????<15>??<4>@V$?'@<4><18>@<7><16><24>l<16> ???<\0><18>!<\0><3>?dL?<2>@1<\0>??<1>??<\b><\0>`?<2><\0>A<\0><\0><\b>?@<2><1><2>?<16><15>?<\0><\f>`<2><4><\n><\0><4><27><\0><2><4> <\f><25><\0><\b><6>D ?<\0>?<24><\0>$<6>s<\0><3>A<\b>"<1><\0>&<24>0<\0>@<17><2>'??$?<2>@<16><\n>?<1>@<26>A<1><17>G"#??<5><6>F?@BTe??<24><\n>??)<4>?<5>?<20>?$<\b>?h<4> B?<3><\n>`<23><\b><\0>R<7><\b><\b>?<2>?<1>@<20>"<\0><\f><16>?<4>fF*$@!<2>?<2>1{<\b>????`???%"PdD<6>?<\b><\0><16><\0>?<4>X $ +)?<5>?<\f>?<17>P??`4? ?<4>2<1>D"<2>?@??B<22>??Gf?D?<9>?<3>??(<18>f%?k???<\b>????<1>aP:?<19>?<\0>????`?x#?<15>;jN,<\0><\0><4>?<\0><17><\f>?<\0><4><\0>?<\0>`?<\0>0<7>9?f?g?^"?O<5>?<14>??????<17>X<\0><\0><4><\0><\0><\0><\0><\0>@<20>?<\0>?<30><\0><\n>?<5><7><\r>??GG<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>@<\0><24>?<\0><\b><1>?<\0><\0><16><4><\0><\0>F<\0><\0><\0><3><\0><\0><16><\0><\0><\0>p?x?I$???#?<16>?P??<24>?5<??<\0><\0>9?b<4>?^?<\0><\0>??r<1>??LJF?<4>6=<\0>????.?<1>0<\0><\0><\b>?#2?#<22>??h?(?I*??ju?2N<5>MT?(<20><6><26>A??<7>??<28><21><\b><6><\0><2> <\0><\b>?D??<\0><\0><\0><\0><\0><\0><\0>?<\0><\0><\0><4><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?<\0>C??2???<23>??2??d<11>?<\0>?<?<\0>H&pR<1><\0>E<6><\n>?<\b>&<16>#??<9><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><16><\0><\0>P?<\0>?<6><\0>(z?<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>?h<4>??,??8?<\0>0??4<\0><6>w?<\0>?XA?<\b>^?@M?<\b>?!? 4<\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0><\0>? 0 Quote
Seth Posted August 25, 2022 Posted August 25, 2022 (edited) hello again. i downloaded the current 5.15.61 sid build on github for rk322x and tried it on my box which has rtl8723cs chip. the chip is detected by rk322x-config but no wireless interface is shown when i do ip link. looking at dmesg i get dmesg grep rtl8723cs output [ 9.848405] RTL871X: rtl8723cs v4.3.22.9_16440.20151221_BTCOEX20151214-0700 [ 9.848426] RTL871X: rtl8723cs BT-Coex version = BTCOEX20151214-0700 [ 9.848950] rtl8723cs: probe of mmc1:0001:1 failed with error -110 dmesg cfg80211 [ 2.404787] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.451272] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.462651] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid i have scishion v88 mini which has NAND so i used multitool to install jumpstart nand and it booted to the sd card. went through all the config just fine except for the wireless. i also attached the complete dmesg log. anyways, i am going to try out 5.15.25 bullseye build from this thread to see if it is going to work. it did work fine with the legacy build though. edit same error with 5.15.25 build. dmesg.log Edited August 25, 2022 by Seth 0 Quote
ninh Posted August 27, 2022 Posted August 27, 2022 I'm having a weird board. Chip label is RK3228A, with 8GB eMMC from SKhynix. Multitool doesn't booting up. In maskrom mode, chip shows as RK3128 and flash 4gb from samsung. Bus 003 Device 052: ID 2207:310c Fuzhou Rockchip Electronics Company RK3126/RK3128 in Mask ROM mode Flash Info: Manufacturer: SAMSUNG, value=00 Flash Size: 3696 MB Block Size: 512 KB Page Size: 2 KB ECC Bits: 0 Access Time: 40 Flash CS: Flash<0> After erase eMMC using rkdeveloptool, I can still enter maskrom mode but I can't do anything else. sudo ./rkdeveloptool rci Read Chip Info failed! 0 Quote
jock Posted August 28, 2022 Author Posted August 28, 2022 On 8/27/2022 at 4:43 AM, ninh said: Chip label is RK3228A, with 8GB eMMC from SKhynix. Multitool doesn't booting up. Looking at the USB vendor and device IDs, your chip is not a rk3228a but an rk3128. You may say "But the chip is labelled rk3228a!": there have been past evidences that labels on the chip have been manipulated; I remember a case of a user were the chip was an rk3228a but the label was "Amlogic S905W". rk3128 in different unsupported chip. 0 Quote
Basement Posted August 28, 2022 Posted August 28, 2022 I have been reading this forum, googling, and tinkering for a week or so and I am still having trouble with RAM. Android shows 2GB but in armbian I can only see 1GB. I have used the compiler found here, made sure HIGHMEM was enabled in kernel options, but I still only have 1GB. I feel like it is something obvious that I am overlooking, but can someone help me out? 0 Quote
RaptorSDS Posted August 28, 2022 Posted August 28, 2022 vor 1 Stunde schrieb Basement: Android shows 2GB where did android shows this ? , the normal view under settings is easy to manipulate , also some tools like cpu-z sometimes show wrong numbers . 1 Quote
Basement Posted August 30, 2022 Posted August 30, 2022 (edited) Hi RaptorSDS. Thanks for the quick reply. I had used several apps, ran "free" in a terminal, and all showed 2GB. In all of those cases it was shown that a little over 1GB was in use, maybe 1200 or so. I think what you are suggesting is that what is being shown in android is a lie, and I expect you are correct. Can you suggest a more reliable way to check this in linux and/or android? Edited August 30, 2022 by Basement removed a sentence where I realized I was wrong 0 Quote
jock Posted August 30, 2022 Author Posted August 30, 2022 @Seth Your issue is due to the low pin strength used for GPIO, in some earlier tests I found that lower pin strength for wifi increased overall stability so it is set that way by default, but probably the stability issues were caused by something else. I should set them back to default values. Anyway you should tell what is the real board in your scishion v88 box, as far as I remember, there were some chiptrip mx4vr or something like that into... 1 Quote
fukowaka Posted August 30, 2022 Posted August 30, 2022 Hello there! I succesfully burn @jock Armbian_22.02.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal on emmc chip. Boots OK but im stuck on emmc optimization options after running rk322x-config command. The memory chip is a samsung KMVUS000LA-B304 8gb. The processor is rk3229 (I think... its under a heatsink...) This tv box is selled here in Argentina as Noga tv box. Im really excited with this project. Thanks to all people involved! Im posting some pictures, maybe can help someone else. pd: how important are emmc optimization options? can i go on without configuring this? thk again 0 Quote
Seth Posted August 31, 2022 Posted August 31, 2022 (edited) 9 hours ago, jock said: @Seth Your issue is due to the low pin strength used for GPIO, in some earlier tests I found that lower pin strength for wifi increased overall stability so it is set that way by default, but probably the stability issues were caused by something else. I should set them back to default values. Anyway you should tell what is the real board in your scishion v88 box, as far as I remember, there were some chiptrip mx4vr or something like that into... hi @jock thanks again, i can finally do some tests on my scishion since my h96-max box is doing all the heavy lifting on my network and printer now and it's running smoothly. my board has an id MX4M-V11. i tried the led-conf1(mx4vm) and it did not detect wifi either, it works fine with the legacy build i tested about 2 hours ago. i will eventually go full on hardware mod on this and probably transplant an EMMC chip on this board if there is an unpopulated place for it underneath the NAND. Edited August 31, 2022 by Seth add pic. 0 Quote
Seth Posted August 31, 2022 Posted August 31, 2022 @fukowaka hello, congrats for successful install. emmc optimization is only really to squeeze more performance out of the hardware if it supports it. since our tv boxes are literally frankenstein's monters and are put together from probably used parts or even re-labeled chips, i tend to stick with the the defaults and get it working first to see if it would fit my use case. the default speed of the emmc is already way faster than an sd card i wouldn't worry about it and go with the defaults. 1 Quote
Seth Posted August 31, 2022 Posted August 31, 2022 (edited) this arrived about 5 minutes ago, "out of the box and into the fire pit". board id is MXQ_8058201_v1.3. seems i got an emcp. it came in with the wifi sdio shield removed, i'm guessing they changed the inductor on the lower left of the pic and didn't bother putting the emi shield back on. it's a broadcom 4336 chip the uart is very accessible. will edit later for further findings. https://photos.app.goo.gl/48jMUW5LP239yZdbA Edited August 31, 2022 by Seth added photos. 0 Quote
jock Posted August 31, 2022 Author Posted August 31, 2022 @fukowaka glad to hear your board works fine. I suggest you to use a mainline kernel if you don't have a NAND, the kernel is way more up to date. Legacy kernel builds are very old and I just keep them for people with NAND boards. The eMMC tuning options (which obviously applies only to boards with eMMC/eMCP and not NAND) can give a consistent boost to eMMC throughput, but your mileage may vary. 1 Quote
orojasp Posted August 31, 2022 Posted August 31, 2022 Hi Pals, This is my first post here. My approach on armbian has been a little bit complicated but always read this thread. I have a tv box with an r3228a on it. I'm not totally sure because I didn't perform an test using hexdump as described before, but is one of things I have to do. In the next posts I'm going to tell you what test I've done and which others I'm failing, but this first one is mainly to thanks you for all this information and hard work you put freely to public use. Just trying to run armbian on this box I've learnt a lot! There are many hours of fun and mainly learning (I'm a terrible linux user) to try to give a new use to this little box. see you! Thanks again!! 3 Quote
Eliel Prado Posted August 31, 2022 Posted August 31, 2022 Hi @jock, I'm having some issues with my Rockchip 3229 TV box. It has 3GB of DDR3 ram, 4GB of NAND memory. All images I tested including Multitool, LibreElec, Armbian crash after a few seconds. It freezes between 30 and 60 seconds. Sometimes after the system finishes booting, sometimes at boot (if the boot process takes longer, like on first boot). It doesn't matter if I'm using an image that uses a minimal interface or with a graphical environment, it turns on the led flashes and after locking the led it stops and remains on, and usually generates some noise in the debug port. I'll leave the boot debug logs, it's not a power source problem because I tested it with 3 others, and I also tested it on another tv box of the same model, and it had the same behavior. Link to board photos: Google Photos Link to the vídeo: Youtube Spoiler DDR Version V1.10 20190926 15:54:12.210 -> In 15:54:12.210 -> ID:0xFFF 15:54:12.210 -> 660MHz 15:54:12.210 -> DDR3 15:54:12.210 -> Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB 15:54:12.257 -> mach:2 15:54:12.257 -> OUT 15:54:12.304 -> Boot1 Release Time: May 13 2019 17:02:59, version: 2.56 15:54:12.304 -> ChipType = 0xc, 268 15:54:12.304 -> No.1 FLASH ID:2c 88 4 4b a9 0 15:54:12.304 -> ECC:60 15:54:12.304 -> FTL version: 5.0.56 20190508 15:54:12.677 -> mmc0:cmd5,20 15:54:12.819 -> SdmmcInit=0 0 15:54:12.819 -> BootCapSize=0 15:54:12.819 -> UserCapSize=60906MB 15:54:12.819 -> FwPartOffset=2000 , 0 15:54:12.819 -> StorageInit ok = 542562 15:54:12.863 -> SecureMode = 0 15:54:12.863 -> SecureInit ret = 0, SecureMode = 0 15:54:12.863 -> atags_set_bootdev: ret:(0) 15:54:12.911 -> GPT 0x63337df8 signature is wrong 15:54:12.911 -> recovery gpt... 15:54:12.911 -> GPT 0x63337df8 signature is wrong 15:54:12.911 -> recovery gpt fail! 15:54:12.911 -> tag:LOADER error,addr:0x2000 15:54:12.911 -> hdr 633377e0 + 0x0:0x00000000,0x00000000,0x00000000,0x00000000, 15:54:12.958 -> LOADER Check OK! 0x61000000, 670116 15:54:12.958 -> tag:TOS error,addr:0x4000 15:54:12.958 -> hdr 633377e0 + 0x0:0x44414f4c,0x20205245,0x00000000,0x00000000, 15:54:13.052 -> TOS Check OK! 0x68400000, 743047 15:54:13.052 -> Enter Trust OS 15:54:13.052 -> INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日 星期五 03:32:22 UTC arm) 15:54:13.052 -> 15:54:13.052 -> INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0 15:54:13.052 -> 15:54:13.052 -> INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000 15:54:13.052 -> 15:54:13.052 -> INF [0x0] TEE-CORE:init_teecore:83: teecore inits done 15:54:13.099 -> 15:54:13.240 -> 15:54:13.240 -> U-Boot 2020.10-armbian+ (Mar 12 2021 - 13:38:05 +0000) 15:54:13.240 -> 15:54:13.240 -> Model: Generic Rockchip rk322x TV Box board 15:54:13.240 -> DRAM: 1010 MiB 15:54:13.381 -> MMC: dwmmc@30000000: 1, dwmmc@30020000: 0 15:54:13.428 -> Loading Environment from EXT4... Card did not respond to voltage select! 15:54:13.474 -> In: serial@11030000 15:54:13.474 -> Out: serial@11030000 15:54:13.474 -> Err: serial@11030000 15:54:13.474 -> Model: Generic Rockchip rk322x TV Box board 15:54:13.474 -> Net: eth0: ethernet@30200000 15:54:13.615 -> starting USB... 15:54:13.615 -> Bus usb@30040000: USB DWC2 15:54:14.889 -> Bus usb@30080000: USB EHCI 1.00 15:54:14.936 -> Bus usb@300c0000: USB EHCI 1.00 15:54:14.936 -> Bus usb@30100000: USB EHCI 1.00 15:54:14.983 -> scanning bus usb@30040000 for devices... 1 USB Device(s) found 15:54:16.106 -> scanning bus usb@30080000 for devices... 1 USB Device(s) found 15:54:17.231 -> scanning bus usb@300c0000 for devices... 1 USB Device(s) found 15:54:18.369 -> scanning bus usb@30100000 for devices... 1 USB Device(s) found 15:54:18.511 -> scanning usb for storage devices... 0 Storage Device(s) found 15:54:18.558 -> Hit any key to stop autoboot: 0 15:54:18.558 -> switch to partitions #0, OK 15:54:18.558 -> mmc1 is current device 15:54:18.605 -> Scanning mmc 1:1... 15:54:18.605 -> Found /extlinux/extlinux.conf 15:54:18.605 -> 175 bytes read in 8 ms (20.5 KiB/s) 15:54:18.605 -> 1: Multitool 15:54:18.605 -> Retrieving file: /kernel.img 15:54:18.983 -> 8719272 bytes read in 384 ms (21.7 MiB/s) 15:54:18.983 -> append: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0 15:54:19.030 -> Retrieving file: /rk322x-box.dtb 15:54:19.030 -> 46636 bytes read in 8 ms (5.6 MiB/s) 15:54:19.030 -> ## Flattened Device Tree blob at 61f00000 15:54:19.030 -> Booting using the fdt blob at 0x61f00000 15:54:19.078 -> EHCI failed to shut down host controller. 15:54:19.125 -> EHCI failed to shut down host controller. 15:54:19.172 -> Loading Device Tree to 683f1000, end 683ff62b ... OK 15:54:19.172 -> 15:54:19.172 -> Starting kernel ... 15:54:19.172 -> 15:54:21.561 -> [ 0.000000] Booting Linux on physical CPU 0xf00 15:54:21.561 -> [ 0.000000] Initializing cgroup subsys cpuset 15:54:21.561 -> [ 0.000000] Initializing cgroup subsys cpu 15:54:21.561 -> [ 0.000000] Initializing cgroup subsys cpuacct 15:54:21.561 -> [ 0.000000] Linux version 4.4.194-rk322x (root@armbianbuild) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #47 SMP Thu Apr 9 17:37:46 UTC 2020 15:54:21.561 -> [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d 15:54:21.561 -> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 15:54:21.608 -> [ 0.000000] Machine model: Generic RK322x TV Box board 15:54:21.608 -> [ 0.000000] cma: Reserved 128 MiB at 0x98000000 15:54:21.608 -> [ 0.000000] Memory policy: Data cache writealloc 15:54:21.608 -> [ 0.000000] psci: probing for conduit method from DT. 15:54:21.608 -> [ 0.000000] psci: PSCIv65535.65535 detected in firmware. 15:54:21.608 -> [ 0.000000] psci: Using standard PSCI v0.2 function IDs 15:54:21.608 -> [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. 15:54:21.608 -> [ 0.000000] PERCPU: Embedded 14 pages/cpu @e7659000 s24856 r8192 d24296 u57344 15:54:21.654 -> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256256 15:54:21.654 -> [ 0.000000] Kernel command line: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0 15:54:21.654 -> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) 15:54:21.654 -> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 15:54:21.654 -> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 15:54:21.654 -> [ 0.000000] Memory: 871700K/1034240K available (12820K kernel code, 875K rwdata, 3224K rodata, 796K init, 1219K bss, 31468K reserved, 131072K cma-reserved, 0K highmem) 15:54:21.702 -> [ 0.000000] Virtual kernel memory layout: 15:54:21.702 -> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) 15:54:21.702 -> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) 15:54:21.702 -> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) 15:54:21.702 -> [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) 15:54:21.702 -> [ 0.000000] pkmap : 0xafe00000 - 0xb0000000 ( 2 MB) 15:54:21.702 -> [ 0.000000] modules : 0xaf000000 - 0xafe00000 ( 14 MB) 15:54:21.749 -> [ 0.000000] .text : 0xb0008000 - 0xb0c8d53c (12822 kB) 15:54:21.749 -> [ 0.000000] .init : 0xb10a1000 - 0xb1168000 ( 796 kB) 15:54:21.749 -> [ 0.000000] .data : 0xb1168000 - 0xb1242e94 ( 876 kB) 15:54:21.749 -> [ 0.000000] .bss : 0xb1244000 - 0xb1374ee4 (1220 kB) 15:54:21.749 -> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 15:54:21.749 -> [ 0.000000] Hierarchical RCU implementation. 15:54:21.749 -> [ 0.000000] Build-time adjustment of leaf fanout to 32. 15:54:21.749 -> [ 0.000000] NR_IRQS:16 nr_irqs:16 16 15:54:21.796 -> [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). 15:54:21.796 -> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 15:54:21.796 -> [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 15:54:21.796 -> [ 0.000023] Switching to timer-based delay loop, resolution 41ns 15:54:21.796 -> [ 0.001661] Console: colour dummy device 80x30 15:54:21.796 -> [ 0.001692] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) 15:54:21.796 -> [ 0.001712] pid_max: default: 32768 minimum: 301 15:54:21.841 -> [ 0.001844] Security Framework initialized 15:54:21.841 -> [ 0.001858] Yama: becoming mindful. 15:54:21.841 -> [ 0.001936] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) 15:54:21.841 -> [ 0.001952] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) 15:54:21.841 -> [ 0.002837] Initializing cgroup subsys io 15:54:21.841 -> [ 0.002874] Initializing cgroup subsys memory 15:54:21.841 -> [ 0.002915] Initializing cgroup subsys devices 15:54:21.841 -> [ 0.002935] Initializing cgroup subsys freezer 15:54:21.841 -> [ 0.002952] Initializing cgroup subsys net_cls 15:54:21.886 -> [ 0.002968] Initializing cgroup subsys perf_event 15:54:21.886 -> [ 0.002986] Initializing cgroup subsys net_prio 15:54:21.886 -> [ 0.003014] Initializing cgroup subsys pids 15:54:21.886 -> [ 0.003081] CPU: Testing write buffer coherency: ok 15:54:21.886 -> [ 0.003128] ftrace: allocating 41720 entries in 123 pages 15:54:21.886 -> [ 0.082051] /cpus/cpu@f00 missing clock-frequency property 15:54:21.886 -> [ 0.082083] /cpus/cpu@f01 missing clock-frequency property 15:54:21.886 -> [ 0.082101] /cpus/cpu@f02 missing clock-frequency property 15:54:21.886 -> [ 0.082121] /cpus/cpu@f03 missing clock-frequency property 15:54:21.930 -> [ 0.082133] CPU0: update cpu_capacity 430 15:54:21.930 -> [ 0.082144] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 15:54:21.930 -> [ 0.082224] Setting up static identity map for 0x60008280 - 0x600082d8 15:54:21.930 -> [ 0.085025] CPU1: update cpu_capacity 430 15:54:21.930 -> [ 0.085034] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 15:54:21.930 -> [ 0.086130] CPU2: update cpu_capacity 430 15:54:21.930 -> [ 0.086138] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 15:54:21.930 -> [ 0.087156] CPU3: update cpu_capacity 430 15:54:21.930 -> [ 0.087165] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 15:54:21.976 -> [ 0.087299] Brought up 4 CPUs 15:54:21.976 -> [ 0.087338] SMP: Total of 4 processors activated (192.00 BogoMIPS). 15:54:21.976 -> [ 0.087345] CPU: All CPU(s) started in SVC mode. 15:54:21.976 -> [ 0.088816] devtmpfs: initialized 15:54:21.976 -> [ 0.106168] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 15:54:21.976 -> [ 0.106689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 15:54:21.976 -> [ 0.106725] futex hash table entries: 1024 (order: 4, 65536 bytes) 15:54:21.976 -> [ 0.112706] xor: measuring software checksum speed 15:54:22.023 -> [ 0.150047] arm4regs : 1011.000 MB/sec 15:54:22.023 -> [ 0.190152] 8regs : 705.000 MB/sec 15:54:22.023 -> [ 0.230252] 32regs : 684.000 MB/sec 15:54:22.023 -> [ 0.270356] neon : 1018.000 MB/sec 15:54:22.023 -> [ 0.270366] xor: using function: neon (1018.000 MB/sec) 15:54:22.023 -> [ 0.270402] pinctrl core: initialized pinctrl subsystem 15:54:22.023 -> [ 0.271933] NET: Registered protocol family 16 15:54:22.023 -> [ 0.274073] DMA: preallocated 2048 KiB pool for atomic coherent allocations 15:54:22.023 -> [ 0.286512] cpuidle: using governor ladder 15:54:22.070 -> [ 0.298524] cpuidle: using governor menu 15:54:22.070 -> [ 0.320945] console [pstore-1] enabled 15:54:22.070 -> [ 0.320956] pstore: Registered ramoops as persistent store backend 15:54:22.070 -> [ 0.320968] ramoops: attached 0xf0000@0x62e00000, ecc: 0/0 15:54:22.070 -> [ 0.323874] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. 15:54:22.070 -> [ 0.323894] hw-breakpoint: maximum watchpoint size is 8 bytes. 15:54:22.070 -> [ 0.419374] raid6: int32x1 gen() 133 MB/s 15:54:22.070 -> [ 0.487463] raid6: int32x1 xor() 131 MB/s 15:54:22.070 -> [ 0.555691] raid6: int32x2 gen() 166 MB/s 15:54:22.070 -> [ 0.623986] raid6: int32x2 xor() 137 MB/s 15:54:22.117 -> [ 0.692112] raid6: int32x4 gen() 163 MB/s 15:54:22.117 -> [ 0.760216] raid6: int32x4 xor() 136 MB/s 15:54:22.117 -> [ 0.828519] raid6: int32x8 gen() 166 MB/s 15:54:22.117 -> [ 0.896773] raid6: int32x8 xor() 113 MB/s 15:54:22.117 -> [ 0.964915] raid6: neonx1 gen() 382 MB/s 15:54:22.117 -> [ 1.033044] raid6: neonx1 xor() 290 MB/s 15:54:22.117 -> [ 1.101249] raid6: neonx2 gen() 519 MB/s 15:54:22.117 -> [ 1.169406] raid6: neonx2 xor() 376 MB/s 15:54:22.117 -> [ 1.237608] raid6: neonx4 gen() 581 MB/s 15:54:22.117 -> [ 1.305844] raid6: neonx4 xor() 400 MB/s 15:54:22.117 -> [ 1.374113] raid6: neonx8 gen() 560 MB/s 15:54:22.164 -> [ 1.442294] raid6: neonx8 xor() 391 MB/s 15:54:22.164 -> [ 1.442307] raid6: using algorithm neonx4 gen() 581 MB/s 15:54:22.164 -> [ 1.442316] raid6: .... xor() 400 MB/s, rmw enabled 15:54:22.164 -> [ 1.442327] raid6: using intx1 recovery algorithm 15:54:22.164 -> [ 1.443273] rockchip-pm rockchip-suspend: not set wakeup-config 15:54:22.164 -> [ 1.443296] rockchip-pm rockchip-suspend: not set pwm-regulator-config 15:54:22.164 -> [ 1.446679] iommu: Adding device 20020000.vpu-service to group 0 15:54:22.164 -> [ 1.446782] iommu: Adding device 20030000.rkvdec to group 1 15:54:22.164 -> [ 1.446874] iommu: Adding device 20050000.vop to group 2 15:54:22.211 -> [ 1.446963] iommu: Adding device 20070000.iep to group 3 15:54:22.211 -> [ 1.447489] rk_iommu 20020800.iommu: can't get sclk 15:54:22.211 -> [ 1.448049] rk_iommu 20030480.iommu: can't get sclk 15:54:22.211 -> [ 1.448285] rk_iommu 20053f00.iommu: can't get sclk 15:54:22.211 -> [ 1.448427] rk_iommu 20070800.iommu: can't get aclk 15:54:22.211 -> [ 1.448446] rk_iommu 20070800.iommu: can't get hclk 15:54:22.211 -> [ 1.448462] rk_iommu 20070800.iommu: can't get sclk 15:54:22.211 -> [ 1.449202] SCSI subsystem initialized 15:54:22.211 -> [ 1.449598] usbcore: registered new interface driver usbfs 15:54:22.258 -> [ 1.449696] usbcore: registered new interface driver hub 15:54:22.258 -> [ 1.449812] usbcore: registered new device driver usb 15:54:22.258 -> [ 1.450025] media: Linux media interface: v0.10 15:54:22.258 -> [ 1.450105] Linux video capture interface: v2.00 15:54:22.258 -> [ 1.450368] pps_core: LinuxPPS API ver. 1 registered 15:54:22.258 -> [ 1.450384] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 15:54:22.258 -> [ 1.450425] PTP clock support registered 15:54:22.258 -> [ 1.452266] Advanced Linux Sound Architecture Driver Initialized. 15:54:22.258 -> [ 1.453330] Bluetooth: Core ver 2.21 15:54:22.258 -> [ 1.453396] NET: Registered protocol family 31 15:54:22.305 -> [ 1.453409] Bluetooth: HCI device and connection manager initialized 15:54:22.305 -> [ 1.453430] Bluetooth: HCI socket layer initialized 15:54:22.305 -> [ 1.453447] Bluetooth: L2CAP socket layer initialized 15:54:22.305 -> [ 1.453499] Bluetooth: SCO socket layer initialized 15:54:22.305 -> [ 1.454254] NetLabel: Initializing 15:54:22.305 -> [ 1.454274] NetLabel: domain hash size = 128 15:54:22.305 -> [ 1.454283] NetLabel: protocols = UNLABELED CIPSOv4 15:54:22.305 -> [ 1.454410] NetLabel: unlabeled traffic allowed by default 15:54:22.305 -> [ 1.455411] clocksource: Switched to clocksource arch_sys_counter 15:54:22.351 -> [ 1.550151] NET: Registered protocol family 2 15:54:22.351 -> [ 1.551000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) 15:54:22.351 -> [ 1.551115] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) 15:54:22.351 -> [ 1.551551] TCP: Hash tables configured (established 8192 bind 8192) 15:54:22.351 -> [ 1.551657] UDP hash table entries: 512 (order: 2, 24576 bytes) 15:54:22.351 -> [ 1.551727] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) 15:54:22.351 -> [ 1.552081] NET: Registered protocol family 1 15:54:22.396 -> [ 1.552706] RPC: Registered named UNIX socket transport module. 15:54:22.396 -> [ 1.552727] RPC: Registered udp transport module. 15:54:22.396 -> [ 1.552737] RPC: Registered tcp transport module. 15:54:22.396 -> [ 1.552748] RPC: Registered tcp NFSv4.1 backchannel transport module. 15:54:22.396 -> [ 1.553596] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available 15:54:22.396 -> [ 1.556542] Initialise system trusted keyring 15:54:22.396 -> [ 1.570656] VFS: Disk quotas dquot_6.6.0 15:54:22.396 -> [ 1.570966] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 15:54:22.443 -> [ 1.573763] squashfs: version 4.0 (2009/01/31) Phillip Lougher 15:54:22.443 -> [ 1.577302] NFS: Registering the id_resolver key type 15:54:22.443 -> [ 1.577376] Key type id_resolver registered 15:54:22.443 -> [ 1.577388] Key type id_legacy registered 15:54:22.443 -> [ 1.577419] nfs4filelayout_init: NFSv4 File Layout Driver Registering... 15:54:22.443 -> [ 1.577512] ntfs: driver 2.1.32 [Flags: R/W]. 15:54:22.443 -> [ 1.578434] JFS: nTxBlock = 7834, nTxLock = 62673 15:54:22.443 -> [ 1.587341] SGI XFS with security attributes, no debug enabled 15:54:22.443 -> [ 1.596093] NET: Registered protocol family 38 15:54:22.443 -> [ 1.596149] Key type asymmetric registered 15:54:22.490 -> [ 1.596171] Asymmetric key parser 'x509' registered 15:54:22.490 -> [ 1.596563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) 15:54:22.490 -> [ 1.596827] io scheduler noop registered 15:54:22.490 -> [ 1.596856] io scheduler deadline registered 15:54:22.490 -> [ 1.596934] io scheduler cfq registered (default) 15:54:22.490 -> [ 1.600041] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator 15:54:22.490 -> [ 1.604964] rk-vcodec 20020000.vpu-service: no regulator for vcodec 15:54:22.490 -> [ 1.605405] rk-vcodec 20020000.vpu-service: probe device 15:54:22.537 -> [ 1.605823] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled 15:54:22.537 -> [ 1.607041] rk-vcodec 20020000.vpu-service: could not find power_model node 15:54:22.537 -> [ 1.607066] rk-vcodec 20020000.vpu-service: init success 15:54:22.537 -> [ 1.607381] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry 15:54:22.537 -> [ 1.611670] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330 15:54:22.537 -> [ 1.611697] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 15:54:22.537 -> [ 1.612754] rockchip-system-monitor rockchip-system-monitor: system monitor probe 15:54:22.537 -> [ 1.614995] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 15:54:22.585 -> [ 1.615870] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 30, base_baud = 1500000) is a 16550A 15:54:22.585 -> [ 2.647633] console [ttyS2] enabled 15:54:22.585 -> [ 2.652894] [drm] Initialized drm 1.1.0 20060810 15:54:22.585 -> [ 2.660008] [drm] Rockchip DRM driver version: v1.0.1 15:54:22.585 -> [ 2.665339] rockchip-drm display-subsystem: devfreq is not set 15:54:22.585 -> [ 2.671976] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xb0d111b0) 15:54:22.632 -> [ 2.679736] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports 15:54:22.632 -> [ 2.686400] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver 15:54:22.632 -> [ 2.694253] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy) 15:54:22.632 -> [ 2.705204] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xb0d09708) 15:54:22.632 -> [ 2.712680] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 15:54:22.632 -> [ 2.719317] [drm] No driver support for vblank timestamp query. 15:54:22.632 -> [ 2.725367] rockchip-drm display-subsystem: failed to parse display resources 15:54:23.385 -> [ 3.355239] rockchip-vop 20050000.vop: [drm:vop_crtc_enable] Update mode to 1440x900p60, type: 11 15:54:23.385 -> [ 3.356074] dwhdmi-rockchip 200a0000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 15:54:23.385 -> [ 3.356082] dwhdmi-rockchip 200a0000.hdmi: colorspace: RGB 15:54:23.385 -> [ 3.356090] dwhdmi-rockchip 200a0000.hdmi: scan mode: Underscan 15:54:23.385 -> [ 3.356096] dwhdmi-rockchip 200a0000.hdmi: colorimetry: No Data 15:54:23.432 -> [ 3.356103] dwhdmi-rockchip 200a0000.hdmi: picture aspect: No Data 15:54:23.432 -> [ 3.356110] dwhdmi-rockchip 200a0000.hdmi: active aspect: Same as Picture 15:54:23.432 -> [ 3.356116] dwhdmi-rockchip 200a0000.hdmi: itc: IT Content 15:54:23.432 -> [ 3.356123] dwhdmi-rockchip 200a0000.hdmi: extended colorimetry: xvYCC 601 15:54:23.432 -> [ 3.356129] dwhdmi-rockchip 200a0000.hdmi: quantization range: Full 15:54:23.432 -> [ 3.356136] dwhdmi-rockchip 200a0000.hdmi: nups: Unknown Non-uniform Scaling 15:54:23.479 -> [ 3.356142] dwhdmi-rockchip 200a0000.hdmi: video code: 0 15:54:23.479 -> [ 3.356148] dwhdmi-rockchip 200a0000.hdmi: ycc quantization range: Full 15:54:23.479 -> [ 3.356155] dwhdmi-rockchip 200a0000.hdmi: hdmi content type: Graphics 15:54:23.479 -> [ 3.356161] dwhdmi-rockchip 200a0000.hdmi: pixel repeat: 0 15:54:23.479 -> [ 3.356169] dwhdmi-rockchip 200a0000.hdmi: bar top 0, bottom 0, left 0, right 0 15:54:23.479 -> [ 3.414763] Console: switching to colour frame buffer device 180x56 15:54:23.479 -> [ 3.565970] rockchip-drm display-subsystem: fb0: frame buffer device 15:54:23.526 -> [ 3.594167] brd: module loaded 15:54:23.526 -> [ 3.608474] loop: module loaded 15:54:23.526 -> [ 3.611724] lkdtm: No crash points registered, enable through debugfs 15:54:23.574 -> [ 3.620886] libphy: Fixed MDIO Bus: probed 15:54:23.574 -> [ 3.625091] tun: Universal TUN/TAP device driver, 1.6 15:54:23.574 -> [ 3.630182] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 15:54:23.574 -> [ 3.636753] CAN device driver interface 15:54:23.574 -> [ 3.642049] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output). 15:54:23.574 -> [ 3.649236] rk_gmac-dwmac 30200000.ethernet: TX delay(0x30). 15:54:23.574 -> [ 3.654922] rk_gmac-dwmac 30200000.ethernet: RX delay(0x10). 15:54:23.574 -> [ 3.660656] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes). 15:54:23.574 -> [ 3.667108] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed 15:54:23.621 -> [ 3.679169] rk_gmac-dwmac 30200000.ethernet: init for RMII 15:54:23.668 -> [ 3.719534] stmmac - user ID: 0x10, Synopsys ID: 0x35 15:54:23.668 -> [ 3.724636] Ring mode enabled 15:54:23.668 -> [ 3.727719] DMA HW capability register supported 15:54:23.668 -> [ 3.732266] Normal descriptors 15:54:23.668 -> [ 3.735612] RX Checksum Offload Engine supported (type 2) 15:54:23.668 -> [ 3.741119] TX Checksum insertion supported 15:54:23.668 -> [ 3.745405] Wake-Up On Lan supported 15:54:23.668 -> [ 3.749193] rk_gmac-dwmac 30200000.ethernet: rk_get_eth_addr: mac address: fa:03:39:88:c3:e7 15:54:23.668 -> [ 3.757665] eth%d: device MAC address fa:03:39:88:c3:e7 15:54:23.716 -> [ 3.762932] Enable RX Mitigation via HW Watchdog Timer 15:54:23.716 -> [ 3.785132] libphy: stmmac: probed 15:54:23.716 -> [ 3.788618] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active 15:54:23.716 -> [ 3.795253] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) 15:54:23.716 -> [ 3.801119] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) 15:54:23.716 -> [ 3.806989] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) 15:54:23.762 -> [ 3.812845] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) 15:54:23.762 -> [ 3.818698] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) 15:54:23.762 -> [ 3.824560] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) 15:54:23.762 -> [ 3.830412] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) 15:54:23.762 -> [ 3.836264] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) 15:54:23.762 -> [ 3.842127] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) 15:54:23.762 -> [ 3.847981] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) 15:54:23.762 -> [ 3.853919] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) 15:54:23.807 -> [ 3.859867] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) 15:54:23.807 -> [ 3.865806] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) 15:54:23.807 -> [ 3.871745] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) 15:54:23.807 -> [ 3.877692] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) 15:54:23.807 -> [ 3.883630] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) 15:54:23.807 -> [ 3.889566] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) 15:54:23.807 -> [ 3.895515] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) 15:54:23.807 -> [ 3.901454] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) 15:54:23.852 -> [ 3.907425] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) 15:54:23.852 -> [ 3.913370] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) 15:54:23.852 -> [ 3.919313] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) 15:54:23.852 -> [ 3.925266] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) 15:54:23.852 -> [ 3.931209] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) 15:54:23.852 -> [ 3.937154] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) 15:54:23.852 -> [ 3.943104] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) 15:54:23.897 -> [ 3.949048] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) 15:54:23.897 -> [ 3.954988] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) 15:54:23.897 -> [ 3.960959] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) 15:54:23.897 -> [ 3.966904] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) 15:54:23.897 -> [ 3.972845] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) 15:54:23.897 -> [ 3.980394] PPP generic driver version 2.4.2 15:54:23.897 -> [ 3.985213] Atmel at76x USB Wireless LAN Driver 0.17 loading 15:54:23.897 -> [ 3.991078] usbcore: registered new interface driver at76c50x-usb 15:54:23.943 -> [ 3.997405] usbcore: registered new interface driver rtl8187 15:54:23.943 -> [ 4.003273] usbcore: registered new interface driver rndis_wlan 15:54:23.943 -> [ 4.009350] usbcore: registered new interface driver zd1201 15:54:23.943 -> [ 4.015357] usbcore: registered new interface driver rt2800usb 15:54:23.943 -> [ 4.021408] Rockchip WiFi SYS interface (V1.00) ... 15:54:23.943 -> [ 4.026476] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver 15:54:23.943 -> [ 4.033987] usbcore: registered new interface driver pegasus 15:54:23.990 -> [ 4.039779] usbcore: registered new interface driver rtl8150 15:54:23.990 -> [ 4.045549] usbcore: registered new interface driver r8152 15:54:23.990 -> [ 4.051159] usbcore: registered new interface driver asix 15:54:23.990 -> [ 4.056679] usbcore: registered new interface driver ax88179_178a 15:54:23.990 -> [ 4.062881] usbcore: registered new interface driver cdc_ether 15:54:23.990 -> [ 4.068819] usbcore: registered new interface driver dm9601 15:54:23.990 -> [ 4.074512] usbcore: registered new interface driver smsc75xx 15:54:23.990 -> [ 4.080383] usbcore: registered new interface driver smsc95xx 15:54:23.990 -> [ 4.086224] usbcore: registered new interface driver net1080 15:54:24.038 -> [ 4.092033] usbcore: registered new interface driver rndis_host 15:54:24.038 -> [ 4.098078] usbcore: registered new interface driver MOSCHIP usb-ethernet driver 15:54:24.038 -> [ 4.105652] usbcore: registered new interface driver cdc_ncm 15:54:24.038 -> [ 4.111448] usbcore: registered new interface driver cdc_mbim 15:54:24.038 -> [ 4.117708] 30040000.usb supply vusb_d not found, using dummy regulator 15:54:24.038 -> [ 4.124448] 30040000.usb supply vusb_a not found, using dummy regulator 15:54:24.085 -> [ 4.144265] dwc2 30040000.usb: DWC OTG Controller 15:54:24.085 -> [ 4.149086] dwc2 30040000.usb: new USB bus registered, assigned bus number 1 15:54:24.085 -> [ 4.156213] dwc2 30040000.usb: irq 49, io mem 0x30040000 15:54:24.085 -> [ 4.161877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 15:54:24.085 -> [ 4.168705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.085 -> [ 4.175949] usb usb1: Product: DWC OTG Controller 15:54:24.131 -> [ 4.180675] usb usb1: Manufacturer: Linux 4.4.194-rk322x dwc2_hsotg 15:54:24.131 -> [ 4.186960] usb usb1: SerialNumber: 30040000.usb 15:54:24.131 -> [ 4.192632] hub 1-0:1.0: USB hub found 15:54:24.131 -> [ 4.196543] hub 1-0:1.0: 1 port detected 15:54:24.131 -> [ 4.202057] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 15:54:24.131 -> [ 4.208701] ehci-platform: EHCI generic platform driver 15:54:24.131 -> [ 4.216542] ehci-platform 30080000.usb: EHCI Host Controller 15:54:24.131 -> [ 4.222633] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2 15:54:24.176 -> [ 4.230796] ehci-platform 30080000.usb: irq 50, io mem 0x30080000 15:54:24.176 -> [ 4.247475] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00 15:54:24.176 -> [ 4.253979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 15:54:24.176 -> [ 4.260812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.176 -> [ 4.268059] usb usb2: Product: EHCI Host Controller 15:54:24.223 -> [ 4.272958] usb usb2: Manufacturer: Linux 4.4.194-rk322x ehci_hcd 15:54:24.223 -> [ 4.279071] usb usb2: SerialNumber: 30080000.usb 15:54:24.223 -> [ 4.284631] hub 2-0:1.0: USB hub found 15:54:24.223 -> [ 4.288535] hub 2-0:1.0: 1 port detected 15:54:24.223 -> [ 4.295514] ehci-platform 300c0000.usb: EHCI Host Controller 15:54:24.223 -> [ 4.301803] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3 15:54:24.223 -> [ 4.309953] ehci-platform 300c0000.usb: irq 52, io mem 0x300c0000 15:54:24.270 -> [ 4.327473] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00 15:54:24.270 -> [ 4.334009] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 15:54:24.270 -> [ 4.340845] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.270 -> [ 4.348091] usb usb3: Product: EHCI Host Controller 15:54:24.270 -> [ 4.352990] usb usb3: Manufacturer: Linux 4.4.194-rk322x ehci_hcd 15:54:24.270 -> [ 4.359099] usb usb3: SerialNumber: 300c0000.usb 15:54:24.270 -> [ 4.364667] hub 3-0:1.0: USB hub found 15:54:24.317 -> [ 4.368566] hub 3-0:1.0: 1 port detected 15:54:24.317 -> [ 4.375522] ehci-platform 30100000.usb: EHCI Host Controller 15:54:24.317 -> [ 4.381593] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4 15:54:24.317 -> [ 4.389775] ehci-platform 30100000.usb: irq 54, io mem 0x30100000 15:54:24.317 -> [ 4.407473] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00 15:54:24.364 -> [ 4.413964] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 15:54:24.364 -> [ 4.420793] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.364 -> [ 4.428037] usb usb4: Product: EHCI Host Controller 15:54:24.364 -> [ 4.432937] usb usb4: Manufacturer: Linux 4.4.194-rk322x ehci_hcd 15:54:24.364 -> [ 4.439049] usb usb4: SerialNumber: 30100000.usb 15:54:24.364 -> [ 4.444648] hub 4-0:1.0: USB hub found 15:54:24.364 -> [ 4.448556] hub 4-0:1.0: 1 port detected 15:54:24.364 -> [ 4.453345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 15:54:24.412 -> [ 4.459661] ohci-platform: OHCI generic platform driver 15:54:24.412 -> [ 4.465326] ohci-platform 300a0000.usb: Generic Platform OHCI controller 15:54:24.412 -> [ 4.473490] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5 15:54:24.412 -> [ 4.481653] ohci-platform 300a0000.usb: irq 51, io mem 0x300a0000 15:54:24.457 -> [ 4.547780] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 15:54:24.504 -> [ 4.554630] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.504 -> [ 4.561886] usb usb5: Product: Generic Platform OHCI controller 15:54:24.504 -> [ 4.567837] usb usb5: Manufacturer: Linux 4.4.194-rk322x ohci_hcd 15:54:24.504 -> [ 4.573951] usb usb5: SerialNumber: 300a0000.usb 15:54:24.504 -> [ 4.579774] hub 5-0:1.0: USB hub found 15:54:24.504 -> [ 4.583675] hub 5-0:1.0: 1 port detected 15:54:24.504 -> [ 4.588511] ohci-platform 300e0000.usb: Generic Platform OHCI controller 15:54:24.504 -> [ 4.595642] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6 15:54:24.550 -> [ 4.603823] ohci-platform 300e0000.usb: irq 53, io mem 0x300e0000 15:54:24.598 -> [ 4.667719] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 15:54:24.598 -> [ 4.674553] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.598 -> [ 4.681815] usb usb6: Product: Generic Platform OHCI controller 15:54:24.598 -> [ 4.687764] usb usb6: Manufacturer: Linux 4.4.194-rk322x ohci_hcd 15:54:24.645 -> [ 4.693875] usb usb6: SerialNumber: 300e0000.usb 15:54:24.645 -> [ 4.699959] hub 6-0:1.0: USB hub found 15:54:24.645 -> [ 4.703866] hub 6-0:1.0: 1 port detected 15:54:24.645 -> [ 4.708697] ohci-platform 30120000.usb: Generic Platform OHCI controller 15:54:24.645 -> [ 4.715826] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7 15:54:24.645 -> [ 4.723931] ohci-platform 30120000.usb: irq 55, io mem 0x30120000 15:54:24.740 -> [ 4.787706] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 15:54:24.740 -> [ 4.794534] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 15:54:24.740 -> [ 4.801780] usb usb7: Product: Generic Platform OHCI controller 15:54:24.740 -> [ 4.807740] usb usb7: Manufacturer: Linux 4.4.194-rk322x ohci_hcd 15:54:24.740 -> [ 4.813861] usb usb7: SerialNumber: 30120000.usb 15:54:24.740 -> [ 4.819837] hub 7-0:1.0: USB hub found 15:54:24.740 -> [ 4.823738] hub 7-0:1.0: 1 port detected 15:54:24.740 -> [ 4.828674] usbcore: registered new interface driver cdc_acm 15:54:24.740 -> [ 4.834387] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 15:54:24.787 -> [ 4.842570] usbcore: registered new interface driver cdc_wdm 15:54:24.787 -> [ 4.848575] usbcore: registered new interface driver usb-storage 15:54:24.787 -> [ 4.854797] usbcore: registered new interface driver usbserial 15:54:24.787 -> [ 4.860738] usbcore: registered new interface driver usbserial_generic 15:54:24.787 -> [ 4.867343] usbserial: USB Serial support registered for generic 15:54:24.787 -> [ 4.873462] usbcore: registered new interface driver keyspan 15:54:24.787 -> [ 4.879197] usbserial: USB Serial support registered for Keyspan - (without firmware) 15:54:24.835 -> [ 4.887096] usbserial: USB Serial support registered for Keyspan 1 port adapter 15:54:24.835 -> [ 4.894467] usbserial: USB Serial support registered for Keyspan 2 port adapter 15:54:24.835 -> [ 4.901839] usbserial: USB Serial support registered for Keyspan 4 port adapter 15:54:24.835 -> [ 4.909261] usbcore: registered new interface driver option 15:54:24.835 -> [ 4.914904] usbserial: USB Serial support registered for GSM modem (1-port) 15:54:24.835 -> [ 4.922639] usbcore: registered new interface driver oti6858 15:54:24.835 -> [ 4.928563] usbserial: USB Serial support registered for oti6858 15:54:24.882 -> [ 4.934711] usbcore: registered new interface driver qcserial 15:54:24.882 -> [ 4.940540] usbserial: USB Serial support registered for Qualcomm USB modem 15:54:24.882 -> [ 4.947688] usbcore: registered new interface driver sierra 15:54:24.882 -> [ 4.953337] usbserial: USB Serial support registered for Sierra USB modem 15:54:24.882 -> [ 4.961115] usbcore: registered new interface driver iforce 15:54:24.882 -> [ 4.966890] usbcore: registered new interface driver xpad 15:54:24.882 -> [ 4.972577] usbcore: registered new interface driver usbtouchscreen 15:54:24.929 -> [ 4.980051] i2c /dev entries driver 15:54:24.929 -> [ 4.986418] usbcore: registered new interface driver uvcvideo 15:54:24.929 -> [ 4.992224] USB Video Class driver (1.1.1) 15:54:24.929 -> [ 4.998214] Boot mode: normal 15:54:24.929 -> [ 5.002548] rockchip-thermal 11150000.tsadc: tsadc is probed successfully! 15:54:24.929 -> [ 5.011073] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com 15:54:24.929 -> [ 5.020067] Bluetooth: Virtual HCI driver ver 1.5 15:54:24.975 -> [ 5.025176] Bluetooth: HCI UART driver ver 2.3 15:54:24.975 -> [ 5.029684] Bluetooth: HCI UART protocol H4 registered 15:54:24.975 -> [ 5.034859] Bluetooth: HCI UART protocol LL registered 15:54:24.975 -> [ 5.040037] Bluetooth: HCI UART protocol ATH3K registered 15:54:24.975 -> [ 5.045468] Bluetooth: HCI UART protocol Three-wire (H5) registered 15:54:24.975 -> [ 5.052002] Bluetooth: HCI UART protocol BCM registered 15:54:24.975 -> [ 5.057417] usbcore: registered new interface driver bfusb 15:54:24.975 -> [ 5.063162] usbcore: registered new interface driver btusb 15:54:24.975 -> [ 5.068699] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 15:54:25.022 -> [ 5.075006] cpu cpu0: leakage=3 15:54:25.022 -> [ 5.078254] cpu cpu0: leakage-volt-sel=0 15:54:25.022 -> [ 5.082388] cpu cpu0: Failed to get pvtm 15:54:25.022 -> [ 5.087872] cpu cpu0: avs=0 15:54:25.022 -> [ 5.090745] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 15:54:25.022 -> [ 5.097811] cpu cpu0: failed to read out thermal zone (-22) 15:54:25.022 -> [ 5.104064] cpu cpu0: failed to find power_model node 15:54:25.022 -> [ 5.109858] Synopsys Designware Multimedia Card Interface Driver 15:54:25.022 -> [ 5.116582] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode. 15:54:25.068 -> [ 5.123973] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller. 15:54:25.068 -> [ 5.130838] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a 15:54:25.068 -> [ 5.136700] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo 15:54:25.068 -> [ 5.146604] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found 15:54:25.068 -> [ 5.152830] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found 15:54:25.068 -> [ 5.159236] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO 15:54:25.115 -> [ 5.177338] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 15:54:25.115 -> [ 5.199524] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized 15:54:25.115 -> [ 5.205870] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available 15:54:25.163 -> [ 5.215254] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode. 15:54:25.163 -> [ 5.222646] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller. 15:54:25.163 -> [ 5.229525] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a 15:54:25.163 -> [ 5.231442] usb 7-1: new low-speed USB device number 2 using ohci-platform 15:54:25.163 -> [ 5.242370] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo 15:54:25.163 -> [ 5.252250] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found 15:54:25.209 -> [ 5.258489] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found 15:54:25.209 -> [ 5.277728] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 400000Hz, actual 244140HZ div = 2) 15:54:25.209 -> [ 5.299658] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized 15:54:25.257 -> [ 5.305913] dwmmc_rockchip 30020000.dwmmc: IDMAC supports 32-bit address mode. 15:54:25.257 -> [ 5.313423] dwmmc_rockchip 30020000.dwmmc: Using internal DMA controller. 15:54:25.257 -> [ 5.320299] dwmmc_rockchip 30020000.dwmmc: Version ID is 270a 15:54:25.257 -> [ 5.326208] dwmmc_rockchip 30020000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo 15:54:25.257 -> [ 5.336088] dwmmc_rockchip 30020000.dwmmc: 'clock-freq-min-max' property was deprecated. 15:54:25.257 -> [ 5.344342] dwmmc_rockchip 30020000.dwmmc: No vmmc regulator found 15:54:25.257 -> [ 5.350576] dwmmc_rockchip 30020000.dwmmc: No vqmmc regulator found 15:54:25.305 -> [ 5.367605] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) 15:54:25.305 -> [ 5.377477] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 15:54:25.305 -> [ 5.377516] mmc0: new high speed SDXC card at address aaaa 15:54:25.305 -> [ 5.378384] mmcblk0: mmc0:aaaa SC64G 59.5 GiB 15:54:25.305 -> [ 5.382535] mmcblk0: p1 p2 15:54:25.305 -> [ 5.391332] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 300000Hz, actual 244140HZ div = 2) 15:54:25.352 -> [ 5.421456] dwmmc_rockchip 30020000.dwmmc: 1 slots initialized 15:54:25.352 -> [ 5.428506] ledtrig-cpu: registered to indicate activity on CPUs 15:54:25.352 -> [ 5.434808] hidraw: raw HID events driver (C) Jiri Kosina 15:54:25.352 -> [ 5.440525] usb 7-1: New USB device found, idVendor=1c4f, idProduct=0002 15:54:25.397 -> [ 5.443504] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 200000Hz, actual 162760HZ div = 3) 15:54:25.397 -> [ 5.454203] usbcore: registered new interface driver usbhid 15:54:25.397 -> [ 5.454207] usbhid: USB HID core driver 15:54:25.397 -> [ 5.454717] ashmem: initialized 15:54:25.397 -> [ 5.457326] rknandbase v1.2 2018-05-08 15:54:25.397 -> [ 5.457679] rknand 30030000.nandc: rknand_probe clk rate = 150000000 15:54:25.397 -> [ 5.457920] No.1 FLASH ID:2c 88 4 4b a9 0 15:54:25.397 -> [ 5.457966] No.1 FLASH ID:2c 88 4 4b a9 0 15:54:25.397 -> [ 5.458544] ECC:60 15:54:25.397 -> [ 5.458563] FTL version: 5.0.57 20190828 15:54:25.442 -> [ 5.493364] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 15:54:25.442 -> [ 5.500522] usb 7-1: Product: USB Keyboard 15:54:25.442 -> [ 5.501116] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 100000Hz, actual 97656HZ div = 5) 15:54:25.442 -> [ 5.513784] usb 7-1: Manufacturer: SIGMACHIP 15:54:25.442 -> [ 5.526284] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.0/0003:1C4F:0002.0001/input/input0 15:54:25.490 -> [ 5.572366] ftl_init 0 15:54:25.490 -> [ 5.577013] secureBootEn check error 15:54:25.490 -> [ 5.584913] vendor storage 524b5644,2,2 15:54:25.537 -> [ 5.592030] vendor storage 524b5644,3,3 15:54:25.537 -> [ 5.592469] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input0 15:54:25.537 -> [ 5.599531] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.1/0003:1C4F:0002.0002/input/input1 15:54:25.537 -> [ 5.622990] rknand vendor storage init ok ! 15:54:25.537 -> [ 5.628217] usbcore: registered new interface driver snd-usb-audio 15:54:25.584 -> [ 5.634562] usbcore: registered new interface driver snd-ua101 15:54:25.584 -> [ 5.640541] usbcore: registered new interface driver snd-usb-caiaq 15:54:25.584 -> [ 5.646851] usbcore: registered new interface driver snd-usb-6fire 15:54:25.584 -> [ 5.653170] usbcore: registered new interface driver snd-usb-hiface 15:54:25.584 -> [ 5.655932] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input1 15:54:25.584 -> [ 5.671729] usbcore: registered new interface driver snd-bcd2000 15:54:25.584 -> [ 5.677853] usbcore: registered new interface driver snd_usb_pod 15:54:25.632 -> [ 5.683960] usbcore: registered new interface driver snd_usb_podhd 15:54:25.632 -> [ 5.690232] usbcore: registered new interface driver snd_usb_toneport 15:54:25.632 -> [ 5.696760] usbcore: registered new interface driver snd_usb_variax 15:54:25.632 -> [ 5.707256] u32 classifier 15:54:25.632 -> [ 5.710021] input device check on 15:54:25.632 -> [ 5.713700] Actions configured 15:54:25.632 -> [ 5.717128] Netfilter messages via NETLINK v0.30. 15:54:25.632 -> [ 5.721873] nfnl_acct: registering with nfnetlink. 15:54:25.680 -> [ 5.726765] nf_conntrack version 0.5.0 (15668 buckets, 62672 max) 15:54:25.680 -> [ 5.733618] Initializing XFRM netlink socket 15:54:25.680 -> [ 5.738794] NET: Registered protocol family 10 15:54:25.680 -> [ 5.744496] ip6_tables: (C) 2000-2006 Netfilter Core Team 15:54:25.680 -> [ 5.750305] sit: IPv6 over IPv4 tunneling driver 15:54:25.680 -> [ 5.755738] NET: Registered protocol family 17 15:54:25.680 -> [ 5.760250] NET: Registered protocol family 15 15:54:25.680 -> [ 5.764775] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 15:54:25.727 -> [ 5.777415] Bridge firewalling registered 15:54:25.727 -> [ 5.781445] can: controller area network core (rev 20120528 abi 9) 15:54:25.727 -> [ 5.787700] NET: Registered protocol family 29 15:54:25.727 -> [ 5.792170] can: raw protocol (rev 20120528) 15:54:25.727 -> [ 5.796457] can: broadcast manager protocol (rev 20120528 t) 15:54:25.727 -> [ 5.802137] can: netlink gateway (rev 20130117) max_hops=1 15:54:25.727 -> [ 5.808039] Bluetooth: RFCOMM TTY layer initialized 15:54:25.727 -> [ 5.813043] Bluetooth: RFCOMM socket layer initialized 15:54:25.727 -> [ 5.818229] Bluetooth: RFCOMM ver 1.11 15:54:25.727 -> [ 5.822014] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 15:54:25.773 -> [ 5.827956] Bluetooth: HIDP socket layer initialized 15:54:25.773 -> [ 5.832995] 8021q: 802.1Q VLAN Support v1.8 15:54:25.773 -> [ 5.837227] lib80211: common routines for IEEE802.11 drivers 15:54:25.773 -> [ 5.842966] [WLAN_RFKILL]: Enter rfkill_wlan_init 15:54:25.773 -> [ 5.847981] [BT_RFKILL]: Enter rfkill_rk_init 15:54:25.773 -> [ 5.852588] Key type dns_resolver registered 15:54:25.773 -> [ 5.857178] flash vendor_init_thread! 15:54:25.773 -> [ 5.857249] Error: Driver 'sc031gs' is already registered, aborting... 15:54:25.773 -> [ 5.857673] Registering SWP/SWPB emulation handler 15:54:25.819 -> [ 5.858613] registered taskstats version 1 15:54:25.819 -> [ 5.858629] Loading compiled-in X.509 certificates 15:54:25.819 -> [ 5.861160] Btrfs loaded 15:54:25.819 -> [ 5.862138] rga2: Driver loaded successfully ver:4.01 15:54:25.819 -> [ 5.862304] rga2: Module initialized. 15:54:25.819 -> [ 5.862326] pvtm list NULL 15:54:25.819 -> [ 5.863306] rk-vcodec 20030000.rkvdec: leakage=3 15:54:25.819 -> [ 5.863321] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0 15:54:25.819 -> [ 5.863469] rk-vcodec 20030000.rkvdec: Failed to get pvtm 15:54:25.819 -> [ 5.863818] rk-vcodec 20030000.rkvdec: avs=0 15:54:25.866 -> [ 5.864055] rk-vcodec 20030000.rkvdec: probe device 15:54:25.866 -> [ 5.864458] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled 15:54:25.866 -> [ 5.865614] rk-vcodec 20030000.rkvdec: init success 15:54:25.866 -> [ 5.867328] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok 15:54:25.866 -> [ 5.869870] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok 15:54:25.866 -> [ 5.871716] hctosys: unable to open rtc device (rtc0) 15:54:25.866 -> [ 5.883618] ALSA device list: 15:54:25.866 -> [ 5.883625] #0: DW-I2S-HDMI 15:54:25.866 -> [ 5.883628] #1: SPDIF 15:54:25.866 -> [ 5.959428] flash vendor storage:20170308 ret = -1 15:54:25.913 -> [ 5.964473] ttyS2 - failed to request DMA, use interrupt mode 15:54:25.913 -> [ 5.976316] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored 15:54:25.913 -> [ 5.983841] squashfs: SQUASHFS error: unable to read xattr id index table 15:54:25.913 -> [ 5.994391] VFS: Mounted root (squashfs filesystem) readonly on device 179:2. 15:54:25.913 -> [ 6.005547] devtmpfs: mounted 15:54:25.961 -> [ 6.009446] Freeing unused kernel memory: 796K 15:54:25.961 -> [ 6.013918] This architecture does not have kernel memory protection. 15:54:27.089 -> [ 7.153468] random: dropbear: uninitialized urandom read (32 bytes read, 38 bits of entropy available) 15:54:27.137 -> 15:54:27.137 -> Debian GNU/Linux 10 multitool ttyS2 15:54:27.137 -> 15:54:27.137 -> multitool login: root (automatic login) 15:54:27.137 -> 15:54:27.325 -> sh: 1: cannot create /run/motd.dynamic.new: Read-only file system 15:54:27.325 -> 15:54:27.325 -> The programs included with the Debian GNU/Linux system are free software; 15:54:27.325 -> the exact distribution terms for each program are described in the 15:54:27.325 -> individual files in /usr/share/doc/*/copyright. 15:54:27.325 -> 15:54:27.325 -> Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent 15:54:27.325 -> permitted by applicable law. 15:54:27.325 -> -bash: cannot set terminal process group (-1): Inappropriate ioctl for device 15:54:27.325 -> -bash: no job control in this shell 15:54:27.419 -> root@multitool:~# [ 8.879474] vendor storage:20190527 ret = -1 15:54:32.437 -> [ 12.530244] random: nonblocking pool is initialized 15:55:13.078 -> [/^``DW0Dսշнջb *** I Started it again *** DDR Version V1.10 20190926 16:06:27.813 -> In 16:06:27.813 -> ID:0xFFF 16:06:27.813 -> 660MHz 16:06:27.813 -> DDR3 16:06:27.813 -> Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB 16:06:27.813 -> mach:2 16:06:27.813 -> OUT 16:06:27.859 -> Boot1 Release Time: May 13 2019 17:02:59, version: 2.56 16:06:27.859 -> ChipType = 0xc, 268 16:06:27.859 -> No.1 FLASH ID:2c 88 4 4b a9 0 16:06:27.859 -> ECC:60 16:06:27.859 -> FTL version: 5.0.56 20190508 16:06:28.281 -> mmc0:cmd5,20 16:06:28.422 -> SdmmcInit=0 0 16:06:28.422 -> BootCapSize=0 16:06:28.422 -> UserCapSize=60906MB 16:06:28.422 -> FwPartOffset=2000 , 0 16:06:28.422 -> StorageInit ok = 544626 16:06:28.468 -> SecureMode = 0 16:06:28.468 -> SecureInit ret = 0, SecureMode = 0 16:06:28.468 -> atags_set_bootdev: ret:(0) 16:06:28.468 -> GPT 0x63337df8 signature is wrong 16:06:28.468 -> recovery gpt... 16:06:28.468 -> GPT 0x63337df8 signature is wrong 16:06:28.468 -> recovery gpt fail! 16:06:28.468 -> tag:LOADER error,addr:0x2000 16:06:28.468 -> hdr 633377e0 + 0x0:0x00000000,0x00000000,0x00000000,0x00000000, 16:06:28.516 -> LOADER Check OK! 0x61000000, 672172 16:06:28.562 -> tag:TOS error,addr:0x4000 16:06:28.562 -> hdr 633377e0 + 0x0:0x44414f4c,0x20205245,0x00000000,0x00000000, 16:06:28.609 -> TOS Check OK! 0x68400000, 745103 16:06:28.609 -> Enter Trust OS 16:06:28.609 -> INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日 星期五 03:32:22 UTC arm) 16:06:28.657 -> 16:06:28.657 -> INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0 16:06:28.657 -> 16:06:28.657 -> INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000 16:06:28.657 -> 16:06:28.657 -> INF [0x0] TEE-CORE:init_teecore:83: teecore inits done 16:06:28.657 -> 16:06:28.799 -> 16:06:28.799 -> U-Boot 2020.10-armbian+ (Mar 12 2021 - 13:38:05 +0000) 16:06:28.799 -> 16:06:28.799 -> Model: Generic Rockchip rk322x TV Box board 16:06:28.799 -> DRAM: 1010 MiB 16:06:28.988 -> MMC: dwmmc@30000000: 1, dwmmc@30020000: 0 16:06:28.988 -> Loading Environment from EXT4... Card did not respond to voltage select! 16:06:29.034 -> In: serial@11030000 16:06:29.034 -> Out: serial@11030000 16:06:29.034 -> Err: serial@11030000 16:06:29.034 -> Model: Generic Rockchip rk322x TV Box board 16:06:29.034 -> Net: eth0: ethernet@30200000 16:06:29.223 -> starting USB... 16:06:29.223 -> Bus usb@30040000: USB DWC2 16:06:30.485 -> Bus usb@30080000: USB EHCI 1.00 16:06:30.485 -> Bus usb@300c0000: USB EHCI 1.00 16:06:30.533 -> Bus usb@30100000: USB EHCI 1.00 16:06:30.533 -> scanning bus usb@30040000 for devices... 1 USB Device(s) found 16:06:31.705 -> scanning bus usb@30080000 for devices... 1 USB Device(s) found 16:06:32.824 -> scanning bus usb@300c0000 for devices... 1 USB Device(s) found 16:06:33.958 -> scanning bus usb@30100000 for devices... 1 USB Device(s) found 16:06:34.099 -> scanning usb for storage devices... 0 Storage Device(s) found 16:06:34.147 -> Hit any key to stop autoboot: 0 16:06:34.147 -> switch to partitions #0, OK 16:06:34.147 -> mmc1 is current device 16:06:34.147 -> Scanning mmc 1:1... 16:06:34.195 -> Found /extlinux/extlinux.conf 16:06:34.195 -> Retrieving file: /extlinux/extlinux.conf 16:06:34.195 -> 175 bytes read in 8 ms (20.5 KiB/s) 16:06:34.195 -> 1: Multitool 16:06:34.195 -> Retrieving file: /kernel.img 16:06:34.573 -> 8719272 bytes read in 384 ms (21.7 MiB/s) 16:06:34.573 -> append: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0 16:06:34.620 -> Retrieving file: /rk322x-box.dtb 16:06:34.620 -> 46636 bytes read in 8 ms (5.6 MiB/s) 16:06:34.620 -> ## Flattened Device Tree blob at 61f00000 16:06:34.620 -> Booting using the fdt blob at 0x61f00000 16:06:34.668 -> EHCI failed to shut down host controller. 16:06:34.714 -> EHCI failed to shut down host controller. 16:06:34.714 -> Loading Device Tree to 683f1000, end 683ff62b ... OK 16:06:34.761 -> 16:06:34.761 -> Starting kernel ... 16:06:34.761 -> 16:06:37.122 -> [ 0.000000] Booting Linux on physical CPU 0xf00 16:06:37.122 -> [ 0.000000] Initializing cgroup subsys cpuset 16:06:37.122 -> [ 0.000000] Initializing cgroup subsys cpu 16:06:37.122 -> [ 0.000000] Initializing cgroup subsys cpuacct 16:06:37.122 -> [ 0.000000] Linux version 4.4.194-rk322x (root@armbianbuild) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #47 SMP Thu Apr 9 17:37:46 UTC 2020 16:06:37.169 -> [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d 16:06:37.169 -> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 16:06:37.169 -> [ 0.000000] Machine model: Generic RK322x TV Box board 16:06:37.169 -> [ 0.000000] cma: Reserved 128 MiB at 0x98000000 16:06:37.169 -> [ 0.000000] Memory policy: Data cache writealloc 16:06:37.169 -> [ 0.000000] psci: probing for conduit method from DT. 16:06:37.215 -> [ 0.000000] psci: PSCIv65535.65535 detected in firmware. 16:06:37.215 -> [ 0.000000] psci: Using standard PSCI v0.2 function IDs 16:06:37.215 -> [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. 16:06:37.215 -> [ 0.000000] PERCPU: Embedded 14 pages/cpu @e7659000 s24856 r8192 d24296 u57344 16:06:37.215 -> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256256 16:06:37.215 -> [ 0.000000] Kernel command line: boot=PARTUUID=00628e24-01 root=PARTUUID=00628e24-02 rootwait console=ttyS2,115200 verbose=1 consoleblank=0 16:06:37.215 -> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) 16:06:37.260 -> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 16:06:37.260 -> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 16:06:37.260 -> [ 0.000000] Memory: 871700K/1034240K available (12820K kernel code, 875K rwdata, 3224K rodata, 796K init, 1219K bss, 31468K reserved, 131072K cma-reserved, 0K highmem) 16:06:37.260 -> [ 0.000000] Virtual kernel memory layout: 16:06:37.260 -> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) 16:06:37.260 -> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) 16:06:37.307 -> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) 16:06:37.307 -> [ 0.000000] lowmem : 0xb0000000 - 0xf0000000 (1024 MB) 16:06:37.307 -> [ 0.000000] pkmap : 0xafe00000 - 0xb0000000 ( 2 MB) 16:06:37.307 -> [ 0.000000] modules : 0xaf000000 - 0xafe00000 ( 14 MB) 16:06:37.307 -> [ 0.000000] .text : 0xb0008000 - 0xb0c8d53c (12822 kB) 16:06:37.307 -> [ 0.000000] .init : 0xb10a1000 - 0xb1168000 ( 796 kB) 16:06:37.307 -> [ 0.000000] .data : 0xb1168000 - 0xb1242e94 ( 876 kB) 16:06:37.307 -> [ 0.000000] .bss : 0xb1244000 - 0xb1374ee4 (1220 kB) 16:06:37.355 -> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 16:06:37.355 -> [ 0.000000] Hierarchical RCU implementation. 16:06:37.355 -> [ 0.000000] Build-time adjustment of leaf fanout to 32. 16:06:37.355 -> [ 0.000000] NR_IRQS:16 nr_irqs:16 16 16:06:37.355 -> [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). 16:06:37.355 -> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 16:06:37.355 -> [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 16:06:37.403 -> [ 0.000022] Switching to timer-based delay loop, resolution 41ns 16:06:37.403 -> [ 0.001661] Console: colour dummy device 80x30 16:06:37.403 -> [ 0.001693] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) 16:06:37.403 -> [ 0.001712] pid_max: default: 32768 minimum: 301 16:06:37.403 -> [ 0.001841] Security Framework initialized 16:06:37.403 -> [ 0.001855] Yama: becoming mindful. 16:06:37.403 -> [ 0.001932] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) 16:06:37.403 -> [ 0.001948] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) 16:06:37.403 -> [ 0.002832] Initializing cgroup subsys io 16:06:37.451 -> [ 0.002865] Initializing cgroup subsys memory 16:06:37.451 -> [ 0.002907] Initializing cgroup subsys devices 16:06:37.451 -> [ 0.002926] Initializing cgroup subsys freezer 16:06:37.451 -> [ 0.002944] Initializing cgroup subsys net_cls 16:06:37.451 -> [ 0.002961] Initializing cgroup subsys perf_event 16:06:37.451 -> [ 0.002978] Initializing cgroup subsys net_prio 16:06:37.451 -> [ 0.003007] Initializing cgroup subsys pids 16:06:37.451 -> [ 0.003074] CPU: Testing write buffer coherency: ok 16:06:37.451 -> [ 0.003121] ftrace: allocating 41720 entries in 123 pages 16:06:37.451 -> [ 0.082101] /cpus/cpu@f00 missing clock-frequency property 16:06:37.498 -> [ 0.082132] /cpus/cpu@f01 missing clock-frequency property 16:06:37.498 -> [ 0.082150] /cpus/cpu@f02 missing clock-frequency property 16:06:37.498 -> [ 0.082170] /cpus/cpu@f03 missing clock-frequency property 16:06:37.498 -> [ 0.082181] CPU0: update cpu_capacity 430 16:06:37.498 -> [ 0.082193] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 16:06:37.498 -> [ 0.082272] Setting up static identity map for 0x60008280 - 0x600082d8 16:06:37.498 -> [ 0.085059] CPU1: update cpu_capacity 430 16:06:37.498 -> [ 0.085067] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 16:06:37.498 -> [ 0.086155] CPU2: update cpu_capacity 430 16:06:37.546 -> [ 0.086164] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 16:06:37.546 -> [ 0.087184] CPU3: update cpu_capacity 430 16:06:37.546 -> [ 0.087192] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 16:06:37.546 -> [ 0.087321] Brought up 4 CPUs 16:06:37.546 -> [ 0.087359] SMP: Total of 4 processors activated (192.00 BogoMIPS). 16:06:37.546 -> [ 0.087368] CPU: All CPU(s) started in SVC mode. 16:06:37.546 -> [ 0.088840] devtmpfs: initialized 16:06:37.546 -> [ 0.106172] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 16:06:37.546 -> [ 0.106692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 16:06:37.593 -> [ 0.106727] futex hash table entries: 1024 (order: 4, 65536 bytes) 16:06:37.593 -> [ 0.112695] xor: measuring software checksum speed 16:06:37.593 -> [ 0.150075] arm4regs : 1011.000 MB/sec 16:06:37.593 -> [ 0.190179] 8regs : 705.000 MB/sec 16:06:37.593 -> [ 0.230285] 32regs : 684.000 MB/sec 16:06:37.593 -> [ 0.270388] neon : 1018.000 MB/sec 16:06:37.593 -> [ 0.270399] xor: using function: neon (1018.000 MB/sec) 16:06:37.593 -> [ 0.270436] pinctrl core: initialized pinctrl subsystem 16:06:37.593 -> [ 0.271974] NET: Registered protocol family 16 16:06:37.593 -> [ 0.274111] DMA: preallocated 2048 KiB pool for atomic coherent allocations 16:06:37.640 -> [ 0.286544] cpuidle: using governor ladder 16:06:37.640 -> [ 0.298559] cpuidle: using governor menu 16:06:37.640 -> [ 0.320732] console [pstore-1] enabled 16:06:37.640 -> [ 0.320744] pstore: Registered ramoops as persistent store backend 16:06:37.640 -> [ 0.320756] ramoops: attached 0xf0000@0x62e00000, ecc: 0/0 16:06:37.640 -> [ 0.323628] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. 16:06:37.640 -> [ 0.323649] hw-breakpoint: maximum watchpoint size is 8 bytes. 16:06:37.640 -> [ 0.419398] raid6: int32x1 gen() 133 MB/s 16:06:37.688 -> [ 0.487522] raid6: int32x1 xor() 131 MB/s 16:06:37.688 -> [ 0.555722] raid6: int32x2 gen() 166 MB/s 16:06:37.688 -> [ 0.623779] raid6: int32x2 xor() 136 MB/s 16:06:37.688 -> [ 0.692138] raid6: int32x4 gen() 163 MB/s 16:06:37.688 -> [ 0.760374] raid6: int32x4 xor() 137 MB/s 16:06:37.688 -> [ 0.828531] raid6: int32x8 gen() 166 MB/s 16:06:37.688 -> [ 0.896788] raid6: int32x8 xor() 113 MB/s 16:06:37.688 -> [ 0.964932] raid6: neonx1 gen() 382 MB/s 16:06:37.688 -> [ 1.033062] raid6: neonx1 xor() 290 MB/s 16:06:37.688 -> [ 1.101271] raid6: neonx2 gen() 519 MB/s 16:06:37.688 -> [ 1.169427] raid6: neonx2 xor() 376 MB/s 16:06:37.688 -> [ 1.237629] raid6: neonx4 gen() 581 MB/s 16:06:37.736 -> [ 1.305853] raid6: neonx4 xor() 400 MB/s 16:06:37.736 -> [ 1.374131] raid6: neonx8 gen() 560 MB/s 16:06:37.736 -> [ 1.442310] raid6: neonx8 xor() 391 MB/s 16:06:37.736 -> [ 1.442324] raid6: using algorithm neonx4 gen() 581 MB/s 16:06:37.736 -> [ 1.442333] raid6: .... xor() 400 MB/s, rmw enabled 16:06:37.736 -> [ 1.442344] raid6: using intx1 recovery algorithm 16:06:37.736 -> [ 1.443285] rockchip-pm rockchip-suspend: not set wakeup-config 16:06:37.736 -> [ 1.443307] rockchip-pm rockchip-suspend: not set pwm-regulator-config 16:06:37.736 -> [ 1.446698] iommu: Adding device 20020000.vpu-service to group 0 16:06:37.783 -> [ 1.446802] iommu: Adding device 20030000.rkvdec to group 1 16:06:37.783 -> [ 1.446894] iommu: Adding device 20050000.vop to group 2 16:06:37.783 -> [ 1.446984] iommu: Adding device 20070000.iep to group 3 16:06:37.783 -> [ 1.447521] rk_iommu 20020800.iommu: can't get sclk 16:06:37.783 -> [ 1.448089] rk_iommu 20030480.iommu: can't get sclk 16:06:37.783 -> [ 1.448326] rk_iommu 20053f00.iommu: can't get sclk 16:06:37.783 -> [ 1.448469] rk_iommu 20070800.iommu: can't get aclk 16:06:37.783 -> [ 1.448488] rk_iommu 20070800.iommu: can't get hclk 16:06:37.783 -> [ 1.448504] rk_iommu 20070800.iommu: can't get sclk 16:06:37.783 -> [ 1.449253] SCSI subsystem initialized 16:06:37.831 -> [ 1.449646] usbcore: registered new interface driver usbfs 16:06:37.831 -> [ 1.449744] usbcore: registered new interface driver hub 16:06:37.831 -> [ 1.449865] usbcore: registered new device driver usb 16:06:37.831 -> [ 1.450080] media: Linux media interface: v0.10 16:06:37.831 -> [ 1.450158] Linux video capture interface: v2.00 16:06:37.831 -> [ 1.450421] pps_core: LinuxPPS API ver. 1 registered 16:06:37.831 -> [ 1.450438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 16:06:37.831 -> [ 1.450478] PTP clock support registered 16:06:37.878 -> [ 1.452357] Advanced Linux Sound Architecture Driver Initialized. 16:06:37.878 -> [ 1.453422] Bluetooth: Core ver 2.21 16:06:37.878 -> [ 1.453489] NET: Registered protocol family 31 16:06:37.878 -> [ 1.453503] Bluetooth: HCI device and connection manager initialized 16:06:37.878 -> [ 1.453524] Bluetooth: HCI socket layer initialized 16:06:37.878 -> [ 1.453541] Bluetooth: L2CAP socket layer initialized 16:06:37.878 -> [ 1.453596] Bluetooth: SCO socket layer initialized 16:06:37.878 -> [ 1.454403] NetLabel: Initializing 16:06:37.878 -> [ 1.454425] NetLabel: domain hash size = 128 16:06:37.878 -> [ 1.454434] NetLabel: protocols = UNLABELED CIPSOv4 16:06:37.926 -> [ 1.454509] NetLabel: unlabeled traffic allowed by default 16:06:37.926 -> [ 1.455514] clocksource: Switched to clocksource arch_sys_counter 16:06:37.926 -> [ 1.550300] NET: Registered protocol family 2 16:06:37.926 -> [ 1.551141] TCP established hash table entries: 8192 (order: 3, 32768 bytes) 16:06:37.926 -> [ 1.551255] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) 16:06:37.926 -> [ 1.551689] TCP: Hash tables configured (established 8192 bind 8192) 16:06:37.926 -> [ 1.551796] UDP hash table entries: 512 (order: 2, 24576 bytes) 16:06:37.926 -> [ 1.551866] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) 16:06:37.926 -> [ 1.552214] NET: Registered protocol family 1 16:06:37.974 -> [ 1.552868] RPC: Registered named UNIX socket transport module. 16:06:37.974 -> [ 1.552891] RPC: Registered udp transport module. 16:06:37.974 -> [ 1.552902] RPC: Registered tcp transport module. 16:06:37.974 -> [ 1.552912] RPC: Registered tcp NFSv4.1 backchannel transport module. 16:06:37.974 -> [ 1.553763] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available 16:06:37.974 -> [ 1.556699] Initialise system trusted keyring 16:06:37.974 -> [ 1.570808] VFS: Disk quotas dquot_6.6.0 16:06:37.974 -> [ 1.571121] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 16:06:38.021 -> [ 1.573919] squashfs: version 4.0 (2009/01/31) Phillip Lougher 16:06:38.021 -> [ 1.577452] NFS: Registering the id_resolver key type 16:06:38.021 -> [ 1.577523] Key type id_resolver registered 16:06:38.021 -> [ 1.577535] Key type id_legacy registered 16:06:38.021 -> [ 1.577567] nfs4filelayout_init: NFSv4 File Layout Driver Registering... 16:06:38.021 -> [ 1.577658] ntfs: driver 2.1.32 [Flags: R/W]. 16:06:38.021 -> [ 1.578577] JFS: nTxBlock = 7834, nTxLock = 62673 16:06:38.021 -> [ 1.587480] SGI XFS with security attributes, no debug enabled 16:06:38.021 -> [ 1.596263] NET: Registered protocol family 38 16:06:38.069 -> [ 1.596319] Key type asymmetric registered 16:06:38.069 -> [ 1.596340] Asymmetric key parser 'x509' registered 16:06:38.069 -> [ 1.596727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) 16:06:38.069 -> [ 1.596984] io scheduler noop registered 16:06:38.069 -> [ 1.597016] io scheduler deadline registered 16:06:38.069 -> [ 1.597094] io scheduler cfq registered (default) 16:06:38.069 -> [ 1.600190] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator 16:06:38.069 -> [ 1.605091] rk-vcodec 20020000.vpu-service: no regulator for vcodec 16:06:38.069 -> [ 1.605525] rk-vcodec 20020000.vpu-service: probe device 16:06:38.069 -> [ 1.605947] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled 16:06:38.114 -> [ 1.607113] rk-vcodec 20020000.vpu-service: could not find power_model node 16:06:38.114 -> [ 1.607138] rk-vcodec 20020000.vpu-service: init success 16:06:38.114 -> [ 1.607452] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry 16:06:38.114 -> [ 1.611726] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330 16:06:38.114 -> [ 1.611753] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 16:06:38.114 -> [ 1.612813] rockchip-system-monitor rockchip-system-monitor: system monitor probe 16:06:38.160 -> [ 1.615050] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 16:06:38.160 -> [ 1.615912] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 30, base_baud = 1500000) is a 16550A 16:06:38.160 -> [ 2.647681] console [ttyS2] enabled 16:06:38.160 -> [ 2.652951] [drm] Initialized drm 1.1.0 20060810 16:06:38.160 -> [ 2.660064] [drm] Rockchip DRM driver version: v1.0.1 16:06:38.160 -> [ 2.665392] rockchip-drm display-subsystem: devfreq is not set 16:06:38.160 -> [ 2.672028] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xb0d111b0) 16:06:38.205 -> [ 2.679791] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports 16:06:38.205 -> [ 2.686455] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver 16:06:38.205 -> [ 2.694310] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy) 16:06:38.205 -> [ 2.705252] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xb0d09708) 16:06:38.205 -> [ 2.712728] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 16:06:38.252 -> [ 2.719365] [drm] No driver support for vblank timestamp query. 16:06:38.252 -> [ 2.725418] rockchip-drm display-subsystem: failed to parse display resources 16:06:38.962 -> [ 3.354904] rockchip-vop 20050000.vop: [drm:vop_crtc_enable] Update mode to 1440x900p60, type: 11 16:06:38.962 -> [ 3.355743] dwhdmi-rockchip 200a0000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 16:06:38.962 -> [ 3.355751] dwhdmi-rockchip 200a0000.hdmi: colorspace: RGB 16:06:38.962 -> [ 3.355759] dwhdmi-rockchip 200a0000.hdmi: scan mode: Underscan 16:06:39.010 -> [ 3.355765] dwhdmi-rockchip 200a0000.hdmi: colorimetry: No Data 16:06:39.010 -> [ 3.355771] dwhdmi-rockchip 200a0000.hdmi: picture aspect: No Data 16:06:39.010 -> [ 3.355778] dwhdmi-rockchip 200a0000.hdmi: active aspect: Same as Picture 16:06:39.010 -> [ 3.355784] dwhdmi-rockchip 200a0000.hdmi: itc: IT Content 16:06:39.010 -> [ 3.355791] dwhdmi-rockchip 200a0000.hdmi: extended colorimetry: xvYCC 601 16:06:39.010 -> [ 3.355797] dwhdmi-rockchip 200a0000.hdmi: quantization range: Full 16:06:39.010 -> [ 3.355804] dwhdmi-rockchip 200a0000.hdmi: nups: Unknown Non-uniform Scaling 16:06:39.058 -> [ 3.355810] dwhdmi-rockchip 200a0000.hdmi: video code: 0 16:06:39.058 -> [ 3.355817] dwhdmi-rockchip 200a0000.hdmi: ycc quantization range: Full 16:06:39.058 -> [ 3.355823] dwhdmi-rockchip 200a0000.hdmi: hdmi content type: Graphics 16:06:39.058 -> [ 3.355829] dwhdmi-rockchip 200a0000.hdmi: pixel repeat: 0 16:06:39.058 -> [ 3.355837] dwhdmi-rockchip 200a0000.hdmi: bar top 0, bottom 0, left 0, right 0 16:06:39.058 -> [ 3.414549] Console: switching to colour frame buffer device 180x56 16:06:39.058 -> [ 3.565769] rockchip-drm display-subsystem: fb0: frame buffer device 16:06:39.105 -> [ 3.590258] brd: module loaded 16:06:39.105 -> [ 3.604588] loop: module loaded 16:06:39.105 -> [ 3.607874] lkdtm: No crash points registered, enable through debugfs 16:06:39.105 -> [ 3.617016] libphy: Fixed MDIO Bus: probed 16:06:39.152 -> [ 3.621192] tun: Universal TUN/TAP device driver, 1.6 16:06:39.152 -> [ 3.626307] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 16:06:39.152 -> [ 3.632881] CAN device driver interface 16:06:39.152 -> [ 3.638176] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output). 16:06:39.152 -> [ 3.645386] rk_gmac-dwmac 30200000.ethernet: TX delay(0x30). 16:06:39.152 -> [ 3.651071] rk_gmac-dwmac 30200000.ethernet: RX delay(0x10). 16:06:39.152 -> [ 3.656794] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes). 16:06:39.152 -> [ 3.663244] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed 16:06:39.200 -> [ 3.675292] rk_gmac-dwmac 30200000.ethernet: init for RMII 16:06:39.248 -> [ 3.715637] stmmac - user ID: 0x10, Synopsys ID: 0x35 16:06:39.248 -> [ 3.720724] Ring mode enabled 16:06:39.248 -> [ 3.723817] DMA HW capability register supported 16:06:39.248 -> [ 3.728365] Normal descriptors 16:06:39.248 -> [ 3.731713] RX Checksum Offload Engine supported (type 2) 16:06:39.248 -> [ 3.737212] TX Checksum insertion supported 16:06:39.248 -> [ 3.741507] Wake-Up On Lan supported 16:06:39.248 -> [ 3.745298] rk_gmac-dwmac 30200000.ethernet: rk_get_eth_addr: mac address: fa:03:39:88:c3:e7 16:06:39.248 -> [ 3.753759] eth%d: device MAC address fa:03:39:88:c3:e7 16:06:39.248 -> [ 3.759037] Enable RX Mitigation via HW Watchdog Timer 16:06:39.296 -> [ 3.781196] libphy: stmmac: probed 16:06:39.296 -> [ 3.784685] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active 16:06:39.296 -> [ 3.791318] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) 16:06:39.296 -> [ 3.797184] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) 16:06:39.296 -> [ 3.803040] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) 16:06:39.344 -> [ 3.808908] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) 16:06:39.344 -> [ 3.814760] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) 16:06:39.344 -> [ 3.820611] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) 16:06:39.344 -> [ 3.826474] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) 16:06:39.344 -> [ 3.832326] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) 16:06:39.344 -> [ 3.838179] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) 16:06:39.344 -> [ 3.844043] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) 16:06:39.344 -> [ 3.850000] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) 16:06:39.344 -> [ 3.855945] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) 16:06:39.391 -> [ 3.861890] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) 16:06:39.391 -> [ 3.867835] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) 16:06:39.391 -> [ 3.873789] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) 16:06:39.391 -> [ 3.879731] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) 16:06:39.391 -> [ 3.885671] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) 16:06:39.391 -> [ 3.891624] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) 16:06:39.391 -> [ 3.897566] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) 16:06:39.436 -> [ 3.903519] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) 16:06:39.436 -> [ 3.909470] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) 16:06:39.436 -> [ 3.915414] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) 16:06:39.436 -> [ 3.921355] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) 16:06:39.436 -> [ 3.927304] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) 16:06:39.436 -> [ 3.933247] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) 16:06:39.436 -> [ 3.939187] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) 16:06:39.436 -> [ 3.945138] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) 16:06:39.481 -> [ 3.951079] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) 16:06:39.481 -> [ 3.957037] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) 16:06:39.481 -> [ 3.962979] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) 16:06:39.481 -> [ 3.968920] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) 16:06:39.481 -> [ 3.976464] PPP generic driver version 2.4.2 16:06:39.481 -> [ 3.981280] Atmel at76x USB Wireless LAN Driver 0.17 loading 16:06:39.481 -> [ 3.987154] usbcore: registered new interface driver at76c50x-usb 16:06:39.526 -> [ 3.993471] usbcore: registered new interface driver rtl8187 16:06:39.526 -> [ 3.999337] usbcore: registered new interface driver rndis_wlan 16:06:39.526 -> [ 4.005406] usbcore: registered new interface driver zd1201 16:06:39.526 -> [ 4.011412] usbcore: registered new interface driver rt2800usb 16:06:39.526 -> [ 4.017464] Rockchip WiFi SYS interface (V1.00) ... 16:06:39.526 -> [ 4.022538] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver 16:06:39.526 -> [ 4.030050] usbcore: registered new interface driver pegasus 16:06:39.526 -> [ 4.035840] usbcore: registered new interface driver rtl8150 16:06:39.570 -> [ 4.041607] usbcore: registered new interface driver r8152 16:06:39.570 -> [ 4.047218] usbcore: registered new interface driver asix 16:06:39.570 -> [ 4.052738] usbcore: registered new interface driver ax88179_178a 16:06:39.570 -> [ 4.058932] usbcore: registered new interface driver cdc_ether 16:06:39.570 -> [ 4.064868] usbcore: registered new interface driver dm9601 16:06:39.570 -> [ 4.070567] usbcore: registered new interface driver smsc75xx 16:06:39.570 -> [ 4.076434] usbcore: registered new interface driver smsc95xx 16:06:39.570 -> [ 4.082276] usbcore: registered new interface driver net1080 16:06:39.616 -> [ 4.088079] usbcore: registered new interface driver rndis_host 16:06:39.616 -> [ 4.094123] usbcore: registered new interface driver MOSCHIP usb-ethernet driver 16:06:39.616 -> [ 4.101687] usbcore: registered new interface driver cdc_ncm 16:06:39.616 -> [ 4.107454] usbcore: registered new interface driver cdc_mbim 16:06:39.616 -> [ 4.113736] 30040000.usb supply vusb_d not found, using dummy regulator 16:06:39.616 -> [ 4.120490] 30040000.usb supply vusb_a not found, using dummy regulator 16:06:39.661 -> [ 4.140303] dwc2 30040000.usb: DWC OTG Controller 16:06:39.661 -> [ 4.145125] dwc2 30040000.usb: new USB bus registered, assigned bus number 1 16:06:39.661 -> [ 4.152253] dwc2 30040000.usb: irq 49, io mem 0x30040000 16:06:39.661 -> [ 4.157901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 16:06:39.661 -> [ 4.164729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:39.661 -> [ 4.171973] usb usb1: Product: DWC OTG Controller 16:06:39.706 -> [ 4.176700] usb usb1: Manufacturer: Linux 4.4.194-rk322x dwc2_hsotg 16:06:39.706 -> [ 4.182984] usb usb1: SerialNumber: 30040000.usb 16:06:39.706 -> [ 4.188651] hub 1-0:1.0: USB hub found 16:06:39.706 -> [ 4.192567] hub 1-0:1.0: 1 port detected 16:06:39.706 -> [ 4.198099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 16:06:39.706 -> [ 4.204760] ehci-platform: EHCI generic platform driver 16:06:39.706 -> [ 4.212584] ehci-platform 30080000.usb: EHCI Host Controller 16:06:39.752 -> [ 4.218686] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2 16:06:39.752 -> [ 4.226839] ehci-platform 30080000.usb: irq 50, io mem 0x30080000 16:06:39.752 -> [ 4.243570] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00 16:06:39.752 -> [ 4.250073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 16:06:39.752 -> [ 4.256907] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:39.799 -> [ 4.264153] usb usb2: Product: EHCI Host Controller 16:06:39.799 -> [ 4.269052] usb usb2: Manufacturer: Linux 4.4.194-rk322x ehci_hcd 16:06:39.799 -> [ 4.275160] usb usb2: SerialNumber: 30080000.usb 16:06:39.799 -> [ 4.280712] hub 2-0:1.0: USB hub found 16:06:39.799 -> [ 4.284616] hub 2-0:1.0: 1 port detected 16:06:39.799 -> [ 4.291614] ehci-platform 300c0000.usb: EHCI Host Controller 16:06:39.799 -> [ 4.297899] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3 16:06:39.799 -> [ 4.306058] ehci-platform 300c0000.usb: irq 52, io mem 0x300c0000 16:06:39.846 -> [ 4.323578] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00 16:06:39.846 -> [ 4.330078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 16:06:39.846 -> [ 4.336910] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:39.846 -> [ 4.344156] usb usb3: Product: EHCI Host Controller 16:06:39.846 -> [ 4.349055] usb usb3: Manufacturer: Linux 4.4.194-rk322x ehci_hcd 16:06:39.846 -> [ 4.355166] usb usb3: SerialNumber: 300c0000.usb 16:06:39.846 -> [ 4.360760] hub 3-0:1.0: USB hub found 16:06:39.893 -> [ 4.364665] hub 3-0:1.0: 1 port detected 16:06:39.893 -> [ 4.371633] ehci-platform 30100000.usb: EHCI Host Controller 16:06:39.893 -> [ 4.377704] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4 16:06:39.893 -> [ 4.385882] ehci-platform 30100000.usb: irq 54, io mem 0x30100000 16:06:39.893 -> [ 4.403576] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00 16:06:39.940 -> [ 4.410065] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 16:06:39.940 -> [ 4.416896] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:39.940 -> [ 4.424141] usb usb4: Product: EHCI Host Controller 16:06:39.940 -> [ 4.429043] usb usb4: Manufacturer: Linux 4.4.194-rk322x ehci_hcd 16:06:39.940 -> [ 4.435154] usb usb4: SerialNumber: 30100000.usb 16:06:39.940 -> [ 4.440752] hub 4-0:1.0: USB hub found 16:06:39.940 -> [ 4.444653] hub 4-0:1.0: 1 port detected 16:06:39.940 -> [ 4.449430] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 16:06:39.986 -> [ 4.455749] ohci-platform: OHCI generic platform driver 16:06:39.986 -> [ 4.461434] ohci-platform 300a0000.usb: Generic Platform OHCI controller 16:06:39.986 -> [ 4.469586] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5 16:06:39.986 -> [ 4.477751] ohci-platform 300a0000.usb: irq 51, io mem 0x300a0000 16:06:40.034 -> [ 4.543880] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 16:06:40.081 -> [ 4.550733] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:40.081 -> [ 4.557983] usb usb5: Product: Generic Platform OHCI controller 16:06:40.081 -> [ 4.563934] usb usb5: Manufacturer: Linux 4.4.194-rk322x ohci_hcd 16:06:40.081 -> [ 4.570050] usb usb5: SerialNumber: 300a0000.usb 16:06:40.081 -> [ 4.575890] hub 5-0:1.0: USB hub found 16:06:40.081 -> [ 4.579792] hub 5-0:1.0: 1 port detected 16:06:40.081 -> [ 4.584625] ohci-platform 300e0000.usb: Generic Platform OHCI controller 16:06:40.081 -> [ 4.591755] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6 16:06:40.127 -> [ 4.599889] ohci-platform 300e0000.usb: irq 53, io mem 0x300e0000 16:06:40.173 -> [ 4.663844] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 16:06:40.173 -> [ 4.670682] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:40.173 -> [ 4.677943] usb usb6: Product: Generic Platform OHCI controller 16:06:40.173 -> [ 4.683891] usb usb6: Manufacturer: Linux 4.4.194-rk322x ohci_hcd 16:06:40.220 -> [ 4.690008] usb usb6: SerialNumber: 300e0000.usb 16:06:40.220 -> [ 4.696079] hub 6-0:1.0: USB hub found 16:06:40.220 -> [ 4.699985] hub 6-0:1.0: 1 port detected 16:06:40.220 -> [ 4.704817] ohci-platform 30120000.usb: Generic Platform OHCI controller 16:06:40.220 -> [ 4.711937] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7 16:06:40.220 -> [ 4.720044] ohci-platform 30120000.usb: irq 55, io mem 0x30120000 16:06:40.314 -> [ 4.783817] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 16:06:40.314 -> [ 4.790650] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 16:06:40.314 -> [ 4.797895] usb usb7: Product: Generic Platform OHCI controller 16:06:40.314 -> [ 4.803852] usb usb7: Manufacturer: Linux 4.4.194-rk322x ohci_hcd 16:06:40.314 -> [ 4.809966] usb usb7: SerialNumber: 30120000.usb 16:06:40.314 -> [ 4.815937] hub 7-0:1.0: USB hub found 16:06:40.314 -> [ 4.819849] hub 7-0:1.0: 1 port detected 16:06:40.314 -> [ 4.824764] usbcore: registered new interface driver cdc_acm 16:06:40.362 -> [ 4.830473] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 16:06:40.362 -> [ 4.838674] usbcore: registered new interface driver cdc_wdm 16:06:40.362 -> [ 4.844653] usbcore: registered new interface driver usb-storage 16:06:40.362 -> [ 4.850871] usbcore: registered new interface driver usbserial 16:06:40.362 -> [ 4.856820] usbcore: registered new interface driver usbserial_generic 16:06:40.362 -> [ 4.863430] usbserial: USB Serial support registered for generic 16:06:40.362 -> [ 4.869557] usbcore: registered new interface driver keyspan 16:06:40.362 -> [ 4.875301] usbserial: USB Serial support registered for Keyspan - (without firmware) 16:06:40.410 -> [ 4.883202] usbserial: USB Serial support registered for Keyspan 1 port adapter 16:06:40.410 -> [ 4.890577] usbserial: USB Serial support registered for Keyspan 2 port adapter 16:06:40.410 -> [ 4.897950] usbserial: USB Serial support registered for Keyspan 4 port adapter 16:06:40.410 -> [ 4.905377] usbcore: registered new interface driver option 16:06:40.410 -> [ 4.911017] usbserial: USB Serial support registered for GSM modem (1-port) 16:06:40.410 -> [ 4.918683] usbcore: registered new interface driver oti6858 16:06:40.456 -> [ 4.924608] usbserial: USB Serial support registered for oti6858 16:06:40.456 -> [ 4.930759] usbcore: registered new interface driver qcserial 16:06:40.456 -> [ 4.936587] usbserial: USB Serial support registered for Qualcomm USB modem 16:06:40.456 -> [ 4.943734] usbcore: registered new interface driver sierra 16:06:40.456 -> [ 4.949381] usbserial: USB Serial support registered for Sierra USB modem 16:06:40.456 -> [ 4.957145] usbcore: registered new interface driver iforce 16:06:40.456 -> [ 4.962922] usbcore: registered new interface driver xpad 16:06:40.456 -> [ 4.968601] usbcore: registered new interface driver usbtouchscreen 16:06:40.503 -> [ 4.976072] i2c /dev entries driver 16:06:40.503 -> [ 4.982387] usbcore: registered new interface driver uvcvideo 16:06:40.503 -> [ 4.988196] USB Video Class driver (1.1.1) 16:06:40.503 -> [ 4.994170] Boot mode: normal 16:06:40.503 -> [ 4.998418] rockchip-thermal 11150000.tsadc: tsadc is probed successfully! 16:06:40.503 -> [ 5.006973] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com 16:06:40.503 -> [ 5.016012] Bluetooth: Virtual HCI driver ver 1.5 16:06:40.550 -> [ 5.021138] Bluetooth: HCI UART driver ver 2.3 16:06:40.550 -> [ 5.025661] Bluetooth: HCI UART protocol H4 registered 16:06:40.550 -> [ 5.030835] Bluetooth: HCI UART protocol LL registered 16:06:40.550 -> [ 5.035999] Bluetooth: HCI UART protocol ATH3K registered 16:06:40.550 -> [ 5.041426] Bluetooth: HCI UART protocol Three-wire (H5) registered 16:06:40.550 -> [ 5.048008] Bluetooth: HCI UART protocol BCM registered 16:06:40.550 -> [ 5.053436] usbcore: registered new interface driver bfusb 16:06:40.550 -> [ 5.059113] usbcore: registered new interface driver btusb 16:06:40.597 -> [ 5.064639] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 16:06:40.597 -> [ 5.070941] cpu cpu0: leakage=3 16:06:40.597 -> [ 5.074164] cpu cpu0: leakage-volt-sel=0 16:06:40.597 -> [ 5.078336] cpu cpu0: Failed to get pvtm 16:06:40.597 -> [ 5.083805] cpu cpu0: avs=0 16:06:40.597 -> [ 5.086672] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 16:06:40.597 -> [ 5.093680] cpu cpu0: failed to read out thermal zone (-22) 16:06:40.597 -> [ 5.099946] cpu cpu0: failed to find power_model node 16:06:40.597 -> [ 5.105720] Synopsys Designware Multimedia Card Interface Driver 16:06:40.645 -> [ 5.112440] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode. 16:06:40.645 -> [ 5.119825] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller. 16:06:40.645 -> [ 5.126643] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a 16:06:40.645 -> [ 5.132534] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo 16:06:40.645 -> [ 5.142434] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found 16:06:40.645 -> [ 5.148666] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found 16:06:40.645 -> [ 5.155073] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO 16:06:40.692 -> [ 5.173170] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 16:06:40.692 -> [ 5.195327] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized 16:06:40.692 -> [ 5.201693] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available 16:06:40.740 -> [ 5.211136] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode. 16:06:40.740 -> [ 5.218770] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller. 16:06:40.740 -> [ 5.225638] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a 16:06:40.740 -> [ 5.227527] usb 7-1: new low-speed USB device number 2 using ohci-platform 16:06:40.740 -> [ 5.238498] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo 16:06:40.740 -> [ 5.248380] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found 16:06:40.786 -> [ 5.254617] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found 16:06:40.786 -> [ 5.273894] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 400000Hz, actual 244140HZ div = 2) 16:06:40.786 -> [ 5.295833] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized 16:06:40.834 -> [ 5.302049] dwmmc_rockchip 30020000.dwmmc: IDMAC supports 32-bit address mode. 16:06:40.834 -> [ 5.309524] dwmmc_rockchip 30020000.dwmmc: Using internal DMA controller. 16:06:40.834 -> [ 5.316420] dwmmc_rockchip 30020000.dwmmc: Version ID is 270a 16:06:40.834 -> [ 5.322334] dwmmc_rockchip 30020000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo 16:06:40.834 -> [ 5.332214] dwmmc_rockchip 30020000.dwmmc: 'clock-freq-min-max' property was deprecated. 16:06:40.834 -> [ 5.340461] dwmmc_rockchip 30020000.dwmmc: No vmmc regulator found 16:06:40.834 -> [ 5.346704] dwmmc_rockchip 30020000.dwmmc: No vqmmc regulator found 16:06:40.882 -> [ 5.363737] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) 16:06:40.882 -> [ 5.373612] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 16:06:40.882 -> [ 5.373649] mmc0: new high speed SDXC card at address aaaa 16:06:40.882 -> [ 5.374518] mmcblk0: mmc0:aaaa SC64G 59.5 GiB 16:06:40.882 -> [ 5.378617] mmcblk0: p1 p2 16:06:40.930 -> [ 5.387451] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 300000Hz, actual 244140HZ div = 2) 16:06:40.930 -> [ 5.417589] dwmmc_rockchip 30020000.dwmmc: 1 slots initialized 16:06:40.930 -> [ 5.424639] ledtrig-cpu: registered to indicate activity on CPUs 16:06:40.930 -> [ 5.430877] hidraw: raw HID events driver (C) Jiri Kosina 16:06:40.930 -> [ 5.437033] usbcore: registered new interface driver usbhid 16:06:40.930 -> [ 5.437618] usb 7-1: New USB device found, idVendor=1c4f, idProduct=0002 16:06:40.976 -> [ 5.437626] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 16:06:40.976 -> [ 5.437632] usb 7-1: Product: USB Keyboard 16:06:40.976 -> [ 5.437637] usb 7-1: Manufacturer: SIGMACHIP 16:06:40.976 -> [ 5.439641] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 200000Hz, actual 162760HZ div = 3) 16:06:40.976 -> [ 5.449907] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.0/0003:1C4F:0002.0001/input/input0 16:06:40.976 -> [ 5.485523] usbhid: USB HID core driver 16:06:41.024 -> [ 5.489941] ashmem: initialized 16:06:41.024 -> [ 5.495055] rknandbase v1.2 2018-05-08 16:06:41.024 -> [ 5.497145] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 100000Hz, actual 97656HZ div = 5) 16:06:41.024 -> [ 5.504523] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input0 16:06:41.024 -> [ 5.510542] input: SIGMACHIP USB Keyboard as /devices/platform/30120000.usb/usb7/7-1/7-1:1.1/0003:1C4F:0002.0002/input/input1 16:06:41.024 -> [ 5.532029] rknand 30030000.nandc: rknand_probe clk rate = 150000000 16:06:41.071 -> [ 5.538796] No.1 FLASH ID:2c 88 4 4b a9 0 16:06:41.071 -> [ 5.542975] No.1 FLASH ID:2c 88 4 4b a9 0 16:06:41.071 -> [ 5.547618] ECC:60 16:06:41.071 -> [ 5.549647] FTL version: 5.0.57 20190828 16:06:41.071 -> [ 5.564128] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-30120000.usb-1/input1 16:06:41.165 -> [ 5.670527] ftl_init 0 16:06:41.165 -> [ 5.675335] secureBootEn check error 16:06:41.212 -> [ 5.683281] vendor storage 524b5644,2,2 16:06:41.212 -> [ 5.690415] vendor storage 524b5644,3,3 16:06:41.212 -> [ 5.697784] rknand vendor storage init ok ! 16:06:41.212 -> [ 5.702970] usbcore: registered new interface driver snd-usb-audio 16:06:41.212 -> [ 5.709318] usbcore: registered new interface driver snd-ua101 16:06:41.212 -> [ 5.715307] usbcore: registered new interface driver snd-usb-caiaq 16:06:41.212 -> [ 5.721625] usbcore: registered new interface driver snd-usb-6fire 16:06:41.260 -> [ 5.727939] usbcore: registered new interface driver snd-usb-hiface 16:06:41.260 -> [ 5.734308] usbcore: registered new interface driver snd-bcd2000 16:06:41.260 -> [ 5.740431] usbcore: registered new interface driver snd_usb_pod 16:06:41.260 -> [ 5.746540] usbcore: registered new interface driver snd_usb_podhd 16:06:41.260 -> [ 5.752834] usbcore: registered new interface driver snd_usb_toneport 16:06:41.260 -> [ 5.759376] usbcore: registered new interface driver snd_usb_variax 16:06:41.260 -> [ 5.770440] u32 classifier 16:06:41.260 -> [ 5.773213] input device check on 16:06:41.305 -> [ 5.776896] Actions configured 16:06:41.305 -> [ 5.780336] Netfilter messages via NETLINK v0.30. 16:06:41.305 -> [ 5.785081] nfnl_acct: registering with nfnetlink. 16:06:41.305 -> [ 5.789975] nf_conntrack version 0.5.0 (15668 buckets, 62672 max) 16:06:41.305 -> [ 5.796948] Initializing XFRM netlink socket 16:06:41.305 -> [ 5.802262] NET: Registered protocol family 10 16:06:41.305 -> [ 5.808150] ip6_tables: (C) 2000-2006 Netfilter Core Team 16:06:41.305 -> [ 5.814172] sit: IPv6 over IPv4 tunneling driver 16:06:41.353 -> [ 5.819626] NET: Registered protocol family 17 16:06:41.353 -> [ 5.824133] NET: Registered protocol family 15 16:06:41.353 -> [ 5.828658] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 16:06:41.353 -> [ 5.841313] Bridge firewalling registered 16:06:41.353 -> [ 5.845344] can: controller area network core (rev 20120528 abi 9) 16:06:41.353 -> [ 5.851652] NET: Registered protocol family 29 16:06:41.353 -> [ 5.856127] can: raw protocol (rev 20120528) 16:06:41.353 -> [ 5.860422] can: broadcast manager protocol (rev 20120528 t) 16:06:41.400 -> [ 5.866104] can: netlink gateway (rev 20130117) max_hops=1 16:06:41.400 -> [ 5.872002] Bluetooth: RFCOMM TTY layer initialized 16:06:41.400 -> [ 5.876947] Bluetooth: RFCOMM socket layer initialized 16:06:41.400 -> [ 5.882128] Bluetooth: RFCOMM ver 1.11 16:06:41.400 -> [ 5.885910] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 16:06:41.400 -> [ 5.891911] Bluetooth: HIDP socket layer initialized 16:06:41.400 -> [ 5.896953] 8021q: 802.1Q VLAN Support v1.8 16:06:41.400 -> [ 5.901186] lib80211: common routines for IEEE802.11 drivers 16:06:41.400 -> [ 5.906920] [WLAN_RFKILL]: Enter rfkill_wlan_init 16:06:41.400 -> [ 5.911886] [BT_RFKILL]: Enter rfkill_rk_init 16:06:41.447 -> [ 5.916492] Key type dns_resolver registered 16:06:41.447 -> [ 5.921171] Error: Driver 'sc031gs' is already registered, aborting... 16:06:41.447 -> [ 5.927784] flash vendor_init_thread! 16:06:41.447 -> [ 5.928208] Registering SWP/SWPB emulation handler 16:06:41.447 -> [ 5.936308] flash vendor storage:20170308 ret = -1 16:06:41.447 -> [ 5.941862] registered taskstats version 1 16:06:41.447 -> [ 5.946015] Loading compiled-in X.509 certificates 16:06:41.447 -> [ 5.953271] Btrfs loaded 16:06:41.447 -> [ 5.956793] rga2: Driver loaded successfully ver:4.01 16:06:41.447 -> [ 5.962088] rga2: Module initialized. 16:06:41.495 -> [ 5.965824] pvtm list NULL 16:06:41.495 -> [ 5.969641] rk-vcodec 20030000.rkvdec: leakage=3 16:06:41.495 -> [ 5.974374] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0 16:06:41.495 -> [ 5.979976] rk-vcodec 20030000.rkvdec: Failed to get pvtm 16:06:41.495 -> [ 5.985801] rk-vcodec 20030000.rkvdec: avs=0 16:06:41.495 -> [ 5.990389] rk-vcodec 20030000.rkvdec: probe device 16:06:41.495 -> [ 5.995783] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled 16:06:41.495 -> [ 6.003605] rk-vcodec 20030000.rkvdec: init success 16:06:41.543 -> [ 6.010574] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok 16:06:41.543 -> [ 6.020693] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok 16:06:41.543 -> [ 6.030270] hctosys: unable to open rtc device (rtc0) 16:06:41.543 -> [ 6.048961] ALSA device list: 16:06:41.543 -> [ 6.052018] #0: DW-I2S-HDMI 16:06:41.543 -> [ 6.054986] #1: SPDIF 16:06:41.590 -> [ 6.057783] ttyS2 - failed to request DMA, use interrupt mode 16:06:41.590 -> [ 6.070069] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored 16:06:41.590 -> [ 6.077595] squashfs: SQUASHFS error: unable to read xattr id index table 16:06:41.590 -> [ 6.088333] VFS: Mounted root (squashfs filesystem) readonly on device 179:2. 16:06:41.590 -> [ 6.099737] devtmpfs: mounted 16:06:41.638 -> [ 6.103721] Freeing unused kernel memory: 796K 16:06:41.638 -> [ 6.108207] This architecture does not have kernel memory protection. 16:06:42.849 -> [ 7.320732] random: dropbear: uninitialized urandom read (32 bytes read, 38 bits of entropy available) 16:06:42.849 -> 16:06:42.849 -> Debian GNU/Linux 10 multitool ttyS2 16:06:42.897 -> 16:06:42.897 -> multitool login: root (automatic login) 16:06:42.897 -> 16:06:43.040 -> sh: 1: cannot create /run/motd.dynamic.new: Read-only file system 16:06:43.040 -> 16:06:43.040 -> The programs included with the Debian GNU/Linux system are free software; 16:06:43.040 -> the exact distribution terms for each program are described in the 16:06:43.040 -> individual files in /usr/share/doc/*/copyright. 16:06:43.040 -> 16:06:43.040 -> Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent 16:06:43.085 -> permitted by applicable law. 16:06:43.085 -> -bash: cannot set terminal process group (-1): Inappropriate ioctl for device 16:06:43.085 -> -bash: no job control in this shell 16:06:43.132 -> root@multitool:~# [ 8.943583] vendor storage:20190527 ret = -1 16:06:49.853 -> [ 14.355689] random: nonblocking pool is initialized 16:07:28.637 -> [+Z\\@S,@ѹѳй 0 Quote
fukowaka Posted August 31, 2022 Posted August 31, 2022 Hello people! Reporting me here. Yesterday i succesfully boots legacy version of @jock images. He told me try to boot current versions from the mainline. Tried... rk322x-box jammy current cli 286.66 Mb kernel 5.15.63 rk322x-box jammy current xfce 723.94 Mb kernel 5.15.63 rk322x-box sid current cli 341.22 Mb kernel 5.15.63 rk322x-box sid current xfce 627.60 Mb kernel 5.15.63 Also tried Armbian_22.05.0-trunk_Rk322x-box_bullseye_current_5.15.25_minimal.img made by @jock One by one burned into the emmc. Starts booting like for 5 seconds then reboots. Last i can read is "tty2" then reboots again, endlesly Anyone know what could be happening? What can i do? Im with rk3229 1gb ram, 8 gb samsung emmc model KMVUS000LA B304. Wifi chip model: SV6051P thanks again 0 Quote
fukowaka Posted August 31, 2022 Posted August 31, 2022 @Eliel Prado what kernel are you trying to boot? You should try some legacy kernel, just to see if works. https://users.armbian.com/jock/rk322x/armbian/stable/ the first one works for me. Also you can check this tutorial from a brazilian dude with nand memory. 0 Quote
Eliel Prado Posted September 1, 2022 Posted September 1, 2022 (edited) @fukowaka I tried these images: Photo But none does not crash. Even the multitool, I couldn't do a backup because it would take more than 30~60 seconds to do that. Any image I try, none works for more than a minute. I'm Brazilian and I followed this video tutorial, I even tried to compile an image, but so far nothing. I'm booting from the SD card, because the way things are, it wouldn't be possible to install on NAND through the multitool. There doesn't seem to be any hints in these debug lines. Spoiler DDR Version V1.10 20190926 20:47:10.294 -> In 20:47:10.294 -> ID:0xFFF 20:47:10.294 -> 660MHz 20:47:10.294 -> DDR3 20:47:10.294 -> Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB 20:47:10.294 -> mach:2 20:47:10.294 -> OUT 20:47:10.341 -> Boot1 Release Time: May 13 2019 17:02:59, version: 2.56 20:47:10.341 -> ChipType = 0xc, 268 20:47:10.341 -> No.1 FLASH ID:2c 88 4 4b a9 0 20:47:10.341 -> ECC:60 20:47:10.341 -> FTL version: 5.0.56 20190508 20:47:10.756 -> mmc0:cmd5,20 20:47:10.897 -> SdmmcInit=0 0 20:47:10.897 -> BootCapSize=0 20:47:10.897 -> UserCapSize=60906MB 20:47:10.897 -> FwPartOffset=2000 , 0 20:47:10.897 -> StorageInit ok = 542667 20:47:10.944 -> SecureMode = 0 20:47:10.944 -> SecureInit ret = 0, SecureMode = 0 20:47:10.944 -> atags_set_bootdev: ret:(0) 20:47:10.944 -> GPT 0x63337df8 signature is wrong 20:47:10.944 -> recovery gpt... 20:47:10.944 -> GPT 0x63337df8 signature is wrong 20:47:10.944 -> recovery gpt fail! 20:47:10.944 -> tag:LOADER error,addr:0x2000 20:47:10.944 -> hdr 633377e0 + 0x0:0x00000000,0x00000000,0x00000000,0x00000000, 20:47:10.944 -> tag:LOADER error,addr:0x4000 20:47:10.992 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x91,0x05,0x00,0x00,0x9e,0x1e,0x0e,0x60,0x9e,0x1e,0x0e,0x60, 20:47:10.992 -> 20:47:10.992 -> tag:LOADER error,addr:0x2800 20:47:10.992 -> hdr 633377e0 + 0x0:0x000081ed,0x000005ed,0x600e1e9a,0x600e1e9a, 20:47:10.992 -> tag:LOADER error,addr:0x4800 20:47:10.992 -> hdr 633377e0 + 0x0:0xed,0x81,0x00,0x00,0xac,0x36,0x00,0x00,0x9e,0x1e,0x0e,0x60,0x9e,0x1e,0x0e,0x60, 20:47:10.992 -> 20:47:10.992 -> tag:LOADER error,addr:0x3000 20:47:10.992 -> hdr 633377e0 + 0x0:0x000081a4,0x0000096e,0x600e1e9b,0x600e1e9b, 20:47:10.992 -> tag:LOADER error,addr:0x5000 20:47:10.992 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x1c,0x00,0x00,0x00,0x9e,0x1e,0x0e,0x60,0x9e,0x1e,0x0e,0x60, 20:47:11.039 -> 20:47:11.039 -> tag:LOADER error,addr:0x3800 20:47:11.039 -> hdr 633377e0 + 0x0:0x000081a4,0x000045bc,0x600e1e9c,0x600e1e9c, 20:47:11.039 -> tag:LOADER error,addr:0x5800 20:47:11.039 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0xd3,0x03,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.039 -> 20:47:11.039 -> tag:LOADER error,addr:0x4000 20:47:11.039 -> hdr 633377e0 + 0x0:0x000081a4,0x00000591,0x600e1e9e,0x600e1e9e, 20:47:11.039 -> tag:LOADER error,addr:0x6000 20:47:11.039 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x49,0x00,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.039 -> 20:47:11.039 -> tag:LOADER error,addr:0x4800 20:47:11.039 -> hdr 633377e0 + 0x0:0x000081ed,0x000036ac,0x600e1e9e,0x600e1e9e, 20:47:11.085 -> tag:LOADER error,addr:0x6800 20:47:11.085 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x8d,0x01,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.085 -> 20:47:11.085 -> tag:LOADER error,addr:0x5000 20:47:11.085 -> hdr 633377e0 + 0x0:0x0000a1ff,0x0000001c,0x600e1e9e,0x600e1e9e, 20:47:11.085 -> tag:LOADER error,addr:0x7000 20:47:11.085 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x08,0x07,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.085 -> 20:47:11.085 -> tag:LOADER error,addr:0x5800 20:47:11.085 -> hdr 633377e0 + 0x0:0x000081a4,0x000003d3,0x600e1ea1,0x600e1ea1, 20:47:11.085 -> tag:LOADER error,addr:0x7800 20:47:11.130 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x12,0x00,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60, 20:47:11.130 -> 20:47:11.130 -> tag:TOS error,addr:0x4000 20:47:11.130 -> hdr 633377e0 + 0x0:0x000081a4,0x00000591,0x600e1e9e,0x600e1e9e, 20:47:11.130 -> tag:TOS error,addr:0x6000 20:47:11.130 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x49,0x00,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.130 -> 20:47:11.130 -> tag:TOS error,addr:0x4800 20:47:11.130 -> hdr 633377e0 + 0x0:0x000081ed,0x000036ac,0x600e1e9e,0x600e1e9e, 20:47:11.130 -> tag:TOS error,addr:0x6800 20:47:11.130 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x8d,0x01,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.175 -> 20:47:11.175 -> tag:TOS error,addr:0x5000 20:47:11.175 -> hdr 633377e0 + 0x0:0x0000a1ff,0x0000001c,0x600e1e9e,0x600e1e9e, 20:47:11.175 -> tag:TOS error,addr:0x7000 20:47:11.175 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x08,0x07,0x00,0x00,0xa1,0x1e,0x0e,0x60,0xa1,0x1e,0x0e,0x60, 20:47:11.175 -> 20:47:11.175 -> tag:TOS error,addr:0x5800 20:47:11.175 -> hdr 633377e0 + 0x0:0x000081a4,0x000003d3,0x600e1ea1,0x600e1ea1, 20:47:11.175 -> tag:TOS error,addr:0x7800 20:47:11.175 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x12,0x00,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60, 20:47:11.175 -> 20:47:11.175 -> tag:TOS error,addr:0x6000 20:47:11.220 -> hdr 633377e0 + 0x0:0x0000a1ff,0x00000049,0x600e1ea1,0x600e1ea1, 20:47:11.220 -> tag:TOS error,addr:0x8000 20:47:11.220 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x73,0x03,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60, 20:47:11.220 -> 20:47:11.220 -> tag:TOS error,addr:0x6800 20:47:11.220 -> hdr 633377e0 + 0x0:0x000081a4,0x0000018d,0x600e1ea1,0x600e1ea1, 20:47:11.220 -> tag:TOS error,addr:0x8800 20:47:11.220 -> hdr 633377e0 + 0x0:0xff,0xa1,0x00,0x00,0x1e,0x00,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60, 20:47:11.220 -> 20:47:11.220 -> tag:TOS error,addr:0x7000 20:47:11.220 -> hdr 633377e0 + 0x0:0x000081a4,0x00000708,0x600e1ea1,0x600e1ea1, 20:47:11.265 -> tag:TOS error,addr:0x9000 20:47:11.265 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0xcd,0x3a,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60, 20:47:11.265 -> 20:47:11.265 -> tag:TOS error,addr:0x7800 20:47:11.265 -> hdr 633377e0 + 0x0:0x0000a1ff,0x00000012,0x600e1ea2,0x600e1ea2, 20:47:11.265 -> tag:TOS error,addr:0x9800 20:47:11.265 -> hdr 633377e0 + 0x0:0xa4,0x81,0x00,0x00,0x08,0x1e,0x00,0x00,0xa2,0x1e,0x0e,0x60,0xa2,0x1e,0x0e,0x60, 20:47:11.265 -> 20:47:11.310 -> SecureMode = 0 20:47:11.310 -> SecureInit ret = 0, SecureMode = 0 20:47:11.310 -> atags_set_bootdev: ret:(0) 20:47:11.310 -> GPT 0x63337df8 signature is wrong 20:47:11.310 -> recovery gpt... 20:47:11.310 -> GPT 0x63337df8 signature is wrong 20:47:11.355 -> recovery gpt fail! 20:47:11.355 -> LOADER Check OK! 0x61000000, 1021927 20:47:11.402 -> TOS Check OK! 0x68400000, 1068982 20:47:11.402 -> Enter Trust OS 20:47:11.448 -> INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日 星期五 03:32:22 UTC arm) 20:47:11.448 -> 20:47:11.448 -> INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0 20:47:11.448 -> 20:47:11.448 -> INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000 20:47:11.448 -> 20:47:11.448 -> INF [0x0] TEE-CORE:init_teecore:83: teecore inits done 20:47:11.448 -> 20:47:11.635 -> 20:47:11.635 -> U-Boot 2020.10-armbian+ (Mar 12 2021 - 13:38:05 +0000) 20:47:11.635 -> 20:47:11.635 -> Model: Generic Rockchip rk322x TV Box board 20:47:11.635 -> DRAM: 1010 MiB 20:47:11.775 -> MMC: dwmmc@30000000: 1, dwmmc@30020000: 0 20:47:11.822 -> Loading Environment from EXT4... Card did not respond to voltage select! 20:47:11.822 -> In: serial@11030000 20:47:11.822 -> Out: serial@11030000 20:47:11.868 -> Err: serial@11030000 20:47:11.868 -> Model: Generic Rockchip rk322x TV Box board 20:47:11.868 -> Net: eth0: ethernet@30200000 20:47:12.008 -> starting USB... 20:47:12.008 -> Bus usb@30040000: USB DWC2 20:47:13.273 -> Bus usb@30080000: USB EHCI 1.00 20:47:13.320 -> Bus usb@300c0000: USB EHCI 1.00 20:47:13.320 -> Bus usb@30100000: USB EHCI 1.00 20:47:13.366 -> scanning bus usb@30040000 for devices... 1 USB Device(s) found 20:47:14.482 -> scanning bus usb@30080000 for devices... 1 USB Device(s) found 20:47:15.652 -> scanning bus usb@300c0000 for devices... 1 USB Device(s) found 20:47:16.775 -> scanning bus usb@30100000 for devices... 1 USB Device(s) found 20:47:17.937 -> scanning usb for storage devices... 0 Storage Device(s) found 20:47:17.937 -> Hit any key to stop autoboot: 0 20:47:17.984 -> switch to partitions #0, OK 20:47:17.984 -> mmc1 is current device 20:47:17.984 -> Scanning mmc 1:1... 20:47:17.984 -> Found U-Boot script /boot/boot.scr 20:47:18.031 -> 2909 bytes read in 6 ms (472.7 KiB/s) 20:47:18.031 -> ## Executing script at 60000000 20:47:18.031 -> Boot script loaded from mmc 1 20:47:18.031 -> 165 bytes read in 5 ms (32.2 KiB/s) 20:47:18.358 -> 7246089 bytes read in 324 ms (21.3 MiB/s) 20:47:18.771 -> 8771432 bytes read in 388 ms (21.6 MiB/s) 20:47:18.771 -> 49812 bytes read in 10 ms (4.8 MiB/s) 20:47:18.816 -> 232 bytes read in 7 ms (32.2 KiB/s) 20:47:18.816 -> Applying kernel provided DT fixup script (rk322x-fixup.scr) 20:47:18.816 -> ## Executing script at 600f0000 20:47:18.816 -> ## Loading init Ramdisk from Legacy Image at 64000000 ... 20:47:18.816 -> Image Name: uInitrd 20:47:18.816 -> Image Type: ARM Linux RAMDisk Image (gzip compressed) 20:47:18.816 -> Data Size: 7246025 Bytes = 6.9 MiB 20:47:18.816 -> Load Address: 00000000 20:47:18.816 -> Entry Point: 00000000 20:47:18.816 -> Verifying Checksum ... OK 20:47:19.005 -> ## Flattened Device Tree blob at 61f00000 20:47:19.005 -> Booting using the fdt blob at 0x61f00000 20:47:19.052 -> EHCI failed to shut down host controller. 20:47:19.100 -> EHCI failed to shut down host controller. 20:47:19.146 -> Loading Ramdisk to 67d16000, end 683ff0c9 ... OK 20:47:19.379 -> Loading Device Tree to 67ca1000, end 67d15fff ... OK 20:47:19.427 -> 20:47:19.427 -> Starting kernel ... 20:47:19.427 -> 20:47:28.425 -> [ 8.233086] mali-utgard 20001000.gpu: Failed to get pvtm 20:47:28.560 -> [ 8.348879] devfreq 20001000.gpu: Couldn't update frequency transition information. 20:48:06.446 -> 20:48:06.446 -> rk322x-box login: root (automatic login) 20:48:06.446 -> 20:48:07.469 -> [0;1;34;94m_[0m [0;1;34;94m_____[0;34m____[0m [0;34m____[0m [0;37m_[0m 20:48:07.469 -> [0;1;34;94m_[0m [0;1;34;94m__|[0m [0;1;34;94m|[0m [0;34m_|___[0m [0;34m/___[0m [0;34m\|__[0;37m_[0m [0;37m\__[0m [0;37m__[0m [0;37m|[0m [0;37m|[0;1;30;90m__[0m [0;1;30;90m_____[0m [0;1;30;90m__[0m 20:48:07.469 -> [0;34m|[0m [0;34m'__|[0m [0;34m|/[0m [0;34m/[0m [0;34m|_[0m [0;34m\[0m [0;37m__)[0m [0;37m|[0m [0;37m__)[0m [0;37m\[0m [0;37m\/[0m [0;1;30;90m/____|[0m [0;1;30;90m'_[0m [0;1;30;90m\[0m [0;1;30;90m/[0m [0;1;30;90m_[0m [0;1;34;94m\[0m [0;1;34;94m\/[0m [0;1;34;94m/[0m 20:48:07.516 -> [0;34m|[0m [0;34m|[0m [0;34m|[0m [0;37m<[0m [0;37m___)[0m [0;37m/[0m [0;37m__/[0m [0;37m/[0m [0;1;30;90m__/[0m [0;1;30;90m>[0m [0;1;30;90m<_____|[0m [0;1;30;90m|[0;1;34;94m_)[0m [0;1;34;94m|[0m [0;1;34;94m(_)[0m [0;1;34;94m>[0m [0;1;34;94m<[0m 20:48:07.516 -> [0;37m|_|[0m [0;37m|_|\_\____/[0;1;30;90m_____|_____/_/\_[0;1;34;94m\[0m [0;1;34;94m|_.__/[0m [0;1;34;94m\___[0;34m/_/\_\[0m 20:48:07.561 -> 20:48:07.561 -> Welcome to [0;91mArmbian 20.11.6 Focal[0m with [0;91mLinux 4.4.194-rk322x[0m 20:48:07.561 -> 20:48:07.561 -> [0;91mNo end-user support: [0mcommunity creations 20:48:07.561 -> 20:48:07.561 -> System load: [0;92m 43%[0m Up time: [92m0 min[0m 20:48:07.561 -> Memory usage: [0;92m 16%[0m of 994M IP: [92m[0m 20:48:07.561 -> CPU temp: [0;91m 70°C[0m Usage of /: [0;92m 4%[0m of 58G 20:48:07.608 -> 20:48:07.608 -> Last login: Mon Jan 25 01:24:08 UTC 2021 on tty1 20:48:11.445 -> [9hjjNa:N⸮⸮⸮⸮⸮⸮⸮⸮l⸮⸮⸮⸮@NfN⸮⸮ Edited September 1, 2022 by SteeMan moved log to spoiler 0 Quote
jock Posted September 1, 2022 Author Posted September 1, 2022 13 hours ago, Eliel Prado said: I'm having some issues with my Rockchip 3229 TV box. It has 3GB of DDR3 ram, 4GB of NAND memory. This makes me think you have some fake specs: rk322x cannot address more than 2GB of RAM and 4GB NANDs are pretty uncommon - never seen any rk322x with that amount of flash memory. Looking at the log dump I see 1Gb of RAM for your board. Anyway I don't understand why you are such an old image from 2020... 0 Quote
fukowaka Posted September 1, 2022 Posted September 1, 2022 i dont know how to extract the log from de emmc so i film the boot process. Any idea? 0 Quote
Eliel Prado Posted September 1, 2022 Posted September 1, 2022 @jock In fact I tested it on over 15 images. I started from the current ones, going to the older ones. This was just one of the boot logs I took. I'll try to see if it really has 3 gb of ram, at least on Android it said that. But I confirmed that the datasheet would only go up to 2gb. 0 Quote
fukowaka Posted September 2, 2022 Posted September 2, 2022 (edited) i went back to 4.4 kernel. desktop version perfermance is similar to rpi3b+. Boots and shutown faster. ethernet, wifi, web browsing... so far so good. Edited September 3, 2022 by fukowaka 0 Quote
Neil Wolfkid Posted September 4, 2022 Posted September 4, 2022 (edited) Hello! I'm new at this "linux-on-esoteric-arm-devices" thing (I literally just made an account) and I tried to install this version of armbian provided on this post onto a cheap "MXQ Pro 4K 5G" TV Box (weird name, i know) . Everything works phenomenal, but it seems like there's zero hardware acceleration (glxinfo says i'm using llvmpipe as my gpu driver and everything GUI is unendingly sluggish), I also tried to use apt-get upgrade but it didnt update the kernel at all, probably because NAND devices are only supported by the legacy kernel, And yes, I DID use the rk322x-config thingy and no possible configuration gave me working GPU accel. My device has a NAND chip, 952 MB of ram or close and 7G of "disk??" space. dmesg: https://pastebin.com/xRmrye6r (Also, forgot to mention that my One by Wacom drawing tablet doesnt work on it either...) Edited September 4, 2022 by Neil Wolfkid 0 Quote
jock Posted September 4, 2022 Author Posted September 4, 2022 @Neil WolfkidHello! You're a bit out of luck: if you want to use the legacy kernel builds you need to install the multimedia framework, which is unmaintained anymore and probably won't work on latest ubuntu versions (it was conceived for Focal). Mainline kernel builds instead have out-of-the-box support for 3D acceleration via Lima driver, and also hardware video decoding is supported in hardware (but in this case you may need specially crafted software - in few words: it does not work yet out of the box). In case you use mainline builds, you lose access to internal NAND: an experimental driver was brought up, but it happened it was not working as it was meant to. 0 Quote
jock Posted September 4, 2022 Author Posted September 4, 2022 @Eliel Prado Taking a look at the log, it looks to me that your board freezes exactly after 60 seconds of operativity. it is highly suspicious, this kind of behaviour was often found when a wrong Trust OS (TEE) was in use, causing some kind of watchdog to trigger after a predetermined amount of time resetting or freezing the machine. The few garbage bytes on the serial just before rebooting were also typical about the Trust reboot thing. What is way more interesting is that the trust in use has been widely tested with a lot of boards and seems to work fine, but as long as it is proprietary binary code we don't know what does it do. I could provide you a special image with an opensource Trust and see if it works, but you have to wait a week or so for that (I'm on vacation right now...) Also it looks to me that you're using an outdated version of multitool, please try with latest version. 0 Quote
jock Posted September 4, 2022 Author Posted September 4, 2022 (edited) @fukowaka You did not need to burn them on eMMC to test the mainline kernel images. Once armbian (any version) is installed on internal eMMC, it enables full boot from sdcard and USB stick too, so it is sufficient to burn the image to test directly on sdcard and plug the sdcard in the slot. Anyway you can increase the boot logging level changing verbosity=1 to verbosity=7 in /boot/armbianEnv.txt; this way the kernel w ill log much more informations and maybe will tell something intersting about the issue. Also you may add cpu-stability to overlays= line in /boot/armbianEnv.txt to see if the board boots. Also i have a question: do the mainline kernel images never boot, or they refuse to boot after you run rk322x-config? Edited September 10, 2022 by jock fixed armbianEnv.txt location 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.