Lates build does not boot

[Swietowid]

Hello,

The latest build  Armbian_24.5.1_Bigtreetech-cb1_bookworm_current_6.6.31_minimal.img.xz does not seem to boot on BTT Pi v1.2 (blank screen, no signs of anything happening, no ethernet)

I checked archival version Armbian_24.2.3_Bigtreetech-cb1_bookworm_legacy_6.1.79_minimal.img.xz and it works just fine. 

Any ideas?

 

[Dais]

Same with Armbian_community_24.8.0-trunk.104_Orangepipc2_noble_current_6.6.31... minimal and Gnome desktop. Booting just stops at point when it finds tty0, I don't remember precise line.

[Narwhal]

Hello,

it does boot (for me), but Ethernet and HDMI are not working. I can access it via UART.

[rpq399]

The July 3, 2024 Trixie minimal does not boot, or at least the Ethernet connection does not work.

[Igor]

16 minutes ago, rpq399 said:

The July 3, 2024 Trixie minimal does not boot, or at least the Ethernet connection does not work.

Fixing is WIP
https://github.com/armbian/build/pull/6656

https://armbian.atlassian.net/browse/AR-2312

[t-bob]

I just built a Trixie 6.6.36 for an OPi Zero 2W and that now boots (the 6.6.3x seem to be suspect) so I suspect the fix is in !!!

 

If you can build your own and see

[rpq399]

Still no Ethernet with July 13, 3024 Trixie minimal.

[rpq399]

No boot, or no ethernet on the July 20,2024 Trixie build.

[JohnTheCoolingFan]

Could you try the new images? They are built with new enhancements for BTT CB1, and I managed to boot with it. https://www.armbian.com/bigtreetech-cb1/

[Swietowid]

Works just fine with Armbian_24.11.1_Bigtreetech-cb1_bookworm_current_6.6.60_minimal

[Ash Doi]

Orange pi one H3 also doesn't boot, can't find any recent bootable images older than 1 version ago. I tried to install minimal versions Armbian_community_25.2.0-trunk.86_Orangepipc_bookworm_current_6.6.62_minimal and also Armbian_24.8.1_Orangepione_bookworm_current_6.6.44_minimal.img and also other versions with kernel 6.6.62 and 6.6.44.