Fred Dunord Posted February 13 Posted February 13 Hi, anyone have already connected a speaker to gpio of lcpi h3 v8 (like orange pi pc). I have tried but im not sure if i2s is enabled on armbian 0 Quote
Werner Posted February 14 Posted February 14 moved If it is a 1:1 clone of opi pc check if i2s overlay is enabled. Try armbian-config or the manual way by setting in /boot/armbianEnv.txt Check /boot subfolders for available overlays. 0 Quote
Fred Dunord Posted February 14 Author Posted February 14 i have added to armbianEnv.txt overlays but i2s still disabled thanks for your time 0 Quote
Werner Posted February 14 Posted February 14 There are multiple lines starting with overlay= Put all in one line like overlays=uart1 uart2 uart3 uart4 i2s i2c whatever Make sure the enabled overlays don't share same GPIO pins. Check your boards datasheet/manual. 1 Quote
Fred Dunord Posted Monday at 04:16 PM Author Posted Monday at 04:16 PM thanks for your support i will try tomorrow with MAX98357A is i2s work 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.