Don't use kernel 6.12.16 on sunxi64

[mantouboji]

boot and stopped on mount something.

[dr_toggleswitch]

How did you get this kernel version?  My device  on sunxi64 is on 6.6.72,  and apt wants to update it to 6.6.75.

[Werner]

root@pihole-v2:~# uname -a
Linux pihole-v2 6.12.16-edge-sunxi64 #1 SMP Fri Feb 21 13:01:47 UTC 2025 aarch64 GNU/Linux

 

[mantouboji]

I built it from the latest build system from github .

 

For Zero2 and Zero3, it must be freezen in booting stage, stopped when mount something.

 

Maybe other boards are OK?

[mantouboji]

boot and stop here, Zero3

[Werner]

Seems indeed broken for H61*

H6 is fine.

[going]

15 часов назад, mantouboji сказал:

boot and stop here, Zero3

Try to set the disabled status for the GPU node.

or temporarily disable this patch:

patch/kernel/archive/sunxi-6.12/series.conf#L472

[going]

1 час назад, Werner сказал:

H6 is fine.

Is the GPU node enabled for your board?

[Werner]

1 hour ago, going said:

Is the GPU node enabled for your board?

I think so, yes

 

root@pihole-v2:~# dmesg|grep -i gpu
[    5.922915] panfrost 1800000.gpu: clock rate = 432000000
[    5.922952] panfrost 1800000.gpu: bus_clock rate = 200000000
[    5.923733] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
[    5.923762] panfrost 1800000.gpu: features: 00000000,00000408, issues: 00000000,21054400
[    5.923770] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
[    5.923779] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
[    5.931337] [drm] Initialized panfrost 1.2.0 for 1800000.gpu on minor 1

 

[Werner]

3 hours ago, going said:

or temporarily disable this patch:

patch/kernel/archive/sunxi-6.12/series.conf#L472

I tried this and works with zero2

https://paste.armbian.com/enipilazib

[going]

2 часа назад, Werner сказал:

I tried this and works with zero2

https://paste.armbian.com/enipilazib

[    9.527925] videodev: Linux video capture interface: v2.00
[    9.539551] panfrost 1800000.gpu: clock rate = 432000000
[    9.539593] panfrost 1800000.gpu: bus_clock rate = 200000000
[    9.540215] panfrost 1800000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[    9.540250] panfrost 1800000.gpu: features: 00000000,000027f7, issues: 00000000,00000400
[    9.540262] panfrost 1800000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[    9.540274] panfrost 1800000.gpu: shader_present=0x1 l2_present=0x1
[    9.544584] [drm] Initialized panfrost 1.2.0 for 1800000.gpu on minor 1

Thank you for the information provided!
A simple clarification. Does it work on an h616 processor with the patch disabled?

 

For the h618 processor, I was unable to get the GPU to work with or without this patch.
It remains to be seen whether this patch plays a positive role for the h6 processor.

If there is no positive effect, then I'd better turn it off.

[Werner]

1 hour ago, going said:

A simple clarification. Does it work on an h616 processor with the patch disabled?

Yes. I disabled the patch you mentioned (patch/kernel/archive/sunxi-6.12/series.conf#L472) and built a bookworm minimal edge image with this and successfully booted an Orange Pi Zero 2 H616.

 

1 hour ago, going said:

It remains to be seen whether this patch plays a positive role for the h6 processor.

I cannot answer this. I am using my Orange Pi One Plus (H6) headless only. Maybe anyone else can.

[going]

1 час назад, Werner сказал:

Yes. I disabled the patch you mentioned (patch/kernel/archive/sunxi-6.12/series.conf#L472) and built a bookworm minimal edge image with this and successfully booted an Orange Pi Zero 2 H616.

I understood. Thank you.