banana pi pro image build

[Cancer]

Hi All

 I've made for my sbc image, however found during this process  messages including 1 marked as error :

 

```

Error response from registry: failed to fetch the content of "ghcr.io/armbian/os/armbian-bsp-cli-bananapipro-current:1-PCc91e-V4b00-H9299-B1e5d-Rf36a": ghcr.io/armbian/os/armbian-bsp-cli-bananapipro-current:1-PCc91e-V4b00-H9299-B1e5d-Rf36a: not found

```

some repeatible during the process:

```

gpg: WARNING: unsafe ownership on homedir '/home/bask/.gnupg'

/usr/bin/deb-systemd-helper was not called from dpkg. Exiting.
/usr/bin/deb-systemd-helper was not called from dpkg. Exiting.
invoke-rc.d: unknown initscript, /etc/init.d/iperf3 not found.

```

and finally filtered from log:

```

filtered from log  @output/logs/log-build-322ed1c8-a4db-4873-85ac-be8e6a87fbd6.log.ans
Error 3 occurred in main shell /home/bask/Dokumenty/build/lib/functions/configuration/menu.sh:38
  dialog_if_terminal_set_vars() --> lib/functions/configuration/menu.sh:38
  interactive_config_ask_board_list() --> lib/functions/configuration/interactive.sh:149
  config_possibly_interactive_kernel_board() --> lib/functions/main/config-interactive.sh:16
  prep_conf_main_build_single() --> lib/functions/main/config-prepare.sh:21
  cli_standard_build_run() --> lib/functions/cli/cli-build.sh:22
  armbian_cli_run_command() --> lib/functions/cli/utils-cli.sh:136
  cli_entrypoint() --> lib/functions/cli/entrypoint.sh:176
  main() --> compile.sh:50

```

Not sure if I should worry or it is handled somehow?

I'll try an expert mode as there was not too much to configure and verify

Second thing: 90 mins for this process is normal? I was doing it on newly installed Ubuntu (directly on the disk in dual mode so whole HW available for it)

 

[Werner]

Excerpts are often useless. Provide full logs using the curl command from the end of each run.

5 minutes ago, Cancer said:

g: 90 mins for this process is normal?

If the used hardware isn't very powerful, yes, can be.

[Cancer]

HP Pavilion8 core processor, 32Gig RAM  laptop.

I wanted to limit information to limit time for digging into it, but here they are:

 

log-build-322ed1c8-a4db-4873-85ac-be8e6a87fbd6.log.ans summary-build-322ed1c8-a4db-4873-85ac-be8e6a87fbd6.md

[Werner]

What's wrong with just using the curl command? It will upload the logs to one of our paste servers and it will be nicely formatted and colorful. Way easier to read.

[Cancer]

Here it is:

https://paste.armbian.com/ququgojasu

 

[Igor]

Works well on my side - could not reproduce (with Docker based compilation), but however there is a (common to a20 boards) problem with HDMI output while boards otherwise works.

[Cancer]

My setting was without docker and I was not using it.

I was observing shell output, and because I selected version without desktop (on which HDMI could affect) while there were some desktop components additions during script processing. Small remark: I use sbc as server with good quality server 1TB 2,5"drive.

[Igor]

1 hour ago, Cancer said:

without docker

This is not recommended as its not controlled environment. It might work, but no warranties.

 

1 hour ago, Cancer said:

I selected version without desktop

 

HDMI output is broken in general (on this particular SoC) regardless of variant, desktop, cli, minimal. Its known bug, but we currently don't have anyone maintaining Allwinner A20 series so its up to random person to fix this. Code is open, so anyone can.

 

1 hour ago, Cancer said:

I use sbc as server

Then it should be o.k. since HDMI output is not needed.

[Cancer]

Thanks, all's clear

Just now, Igor said:

anyone maintaining Allwinner A20 series so its up to random person to fix this

I might be such random person lol. However it would need either a lot of time or information delivered when it has been broken; open code is nice but there are too many kernel versions and distributions. That matter would need some deeper conversation. I think you was the person managing this area so maybe you know where to search the issue to correct it or you know the person who might know.

I'm affraid I found the reason of long image generation time: my laptop fans are to silent today and it might be the reason...